Conformational and Dynamic Properties of Polymer Chains Adsorbed on Hard Surfaces

Author(s):  
Andrey Milchev
Polymer ◽  
2009 ◽  
Vol 50 (21) ◽  
pp. 5142-5148 ◽  
Author(s):  
Cui-Liu Fu ◽  
Wen-Ze Ouyang ◽  
Zhao-Yan Sun ◽  
Li-Jia An ◽  
Hong-Fei Li ◽  
...  

Polymers ◽  
2020 ◽  
Vol 12 (12) ◽  
pp. 2931
Author(s):  
Waldemar Nowicki

The structure and dynamic properties of polymer chains in a confined environment were studied by means of the Monte Carlo method. The studied chains were represented by coarse-grained models and embedded into a simple 3D cubic lattice. The chains stood for two-block linear copolymers of different energy of bead–bead interactions. Their behavior was studied in a nanotube formed by four impenetrable surfaces. The long-time unidirectional motion of the chain in the tight nanopore was found to be correlated with the orientation of both parts of the copolymer along the length of the nanopore. A possible mechanism of the anomalous diffusion was proposed on the basis of thermodynamics of the system, more precisely on the free energy barrier of the swapping of positions of both parts of the chain and the impulse of temporary forces induced by variation of the chain conformation. The mean bead and the mass center autocorrelation functions were examined. While the former function behaves classically, the latter indicates the period of time of superdiffusive motion similar to the ballistic motion with the autocorrelation function scaling with the exponent t5/3. A distribution of periods of time of chain diffusion between swapping events was found and discussed. The influence of the nanotube width and the chain length on the polymer diffusivity was studied.


2008 ◽  
Vol 138 ◽  
pp. 451-475 ◽  
Author(s):  
Andrzej Sikorski

Properties of macromolecules confined in a narrow slit, pore or capillary are important due to of their practical importance. Theoretical treatment of such systems is also interesting because the introduction of confinement has an impact on most properties of polymer chains and it gained a longstanding attention. In order to determine the properties of such systems coarse-grained models of confined polymers were designed where macromolecules were represented by united atoms. Lattice approximation was also often introduced. Different macromolecular architectures were studied: linear, cyclic and star-branched chains. Computer simulation techniques (the variants of the Monet Carlo method like the Metropolis algorithm and the Replica Exchange method as well as Molecular Dynamics and Brownian Dynamics methods) applied for studies of such models were reviewed and evaluated. The structure of the polymer film and the dynamic properties were mainly presented and discussed. The influence of the width of the slit, the temperature and the force field on the dimension and the structure of chains were studied. It was shown that a moderate confinement stabilizes folded chains while a strong confinement does not.


Polymers ◽  
2021 ◽  
Vol 13 (16) ◽  
pp. 2749
Author(s):  
Emmanuel N. Skountzos ◽  
Katerina S. Karadima ◽  
Vlasis G. Mavrantzas

Detailed molecular dynamics (MD) simulations are employed to study how the presence of adsorbed domains and nanoparticle bridging chains affect the structural, conformational, thermodynamic, and dynamic properties of attractive polymer nanocomposite melts in the semi-dilute regime. As a model system we have chosen an unentangled poly(ethylene glycol) (PEG) matrix containing amorphous spherical silica nanoparticles with different diameters and at different concentrations. Emphasis is placed on properties such as the polymer mass density profile around nanoparticles, the compressibility of the system, the mean squared end-to-end distance of PEG chains, their orientational and diffusive dynamics, the single chain form factor, and the scattering functions. Our analysis reveals a significant impact of the adsorbed, interfacial polymer on the microscopic dynamic and conformational properties of the nanocomposite, especially under conditions favoring higher surface-to-volume ratios (e.g., for small nanoparticle sizes at fixed nanoparticle loading, or for higher silica concentrations). Simultaneously, adsorbed polymer chains adopt graft-like conformations, a feature that allows them to considerably extend away from the nanoparticle surface to form bridges with other nanoparticles. These bridges drive the formation of a nanoparticle network whose strength (number of tie chains per nanoparticle) increases substantially with increasing concentration of the polymer matrix in nanoparticles, or with decreasing nanoparticle size at fixed nanoparticle concentration. The presence of hydroxyl groups at the ends of PEG chains plays a key role in the formation of the network. If hydroxyl groups are substituted by methoxy ones, the simulations reveal that the number of bridging chains per nanoparticle decreases dramatically, thus the network formed is less dense and less strong mechanically, and has a smaller impact on the properties of the nanocomposite. Our simulations predict further that the isothermal compressibility and thermal expansion coefficient of PEG-silica nanocomposites are significantly lower than those of pure PEG, with their values decreasing practically linear with increasing concentration of the nanocomposite in nanoparticles.


2005 ◽  
Vol 237-240 ◽  
pp. 169-174 ◽  
Author(s):  
Andrzej Sikorski

Simple lattice model of polymer systems was developed and studied using the Monte Carlo method. The model chains were star-branched with f = 3 arms and rings. The number of polymer segments in a chain was varied up to 800. The chains were built on a simple cubic lattice with the excluded volume interactions only (the athermal system). The polymers were confined between two parallel impenetrable walls with a set of irregular obstacles what can be treated as porous media. A Metropolis-like sampling algorithm employing local changes of chain conformation was used. The dynamic properties of the model system were studied. The differences in the mobility of chains with different internal architectures were shown and discussed. The possible mechanisms of motions were presented.


Author(s):  
M. Lemaalem ◽  
A. Derouiche ◽  
S. EL Fassi ◽  
H. Ridouane

Long polymer chains that mainly exhibit thermoplastic properties are recognized to demonstrate excellent thermal and mechanical features at the molecular level. For the purpose of facilitating its study, we present the results of a coarse-grained Molecular Dynamics (MD) and Dissipative Particle Dynamics (DPD) simulations under the Canonical ensemble (NVT) conditions. For each simulation method, the structure, static and dynamic properties were analyzed, with particular emphasis on the influence of density and temperature on the equilibrium of the polymer. We find, after correcting the Soft Repulsive Potential (SRP) parameters used in DPD method, that both simulation methods describe the polymer physics with the same accuracy. This proves that the DPD method can simplify the polymer simulation and can reproduce with the same precision the equilibrium obtained in the MD simulation.


2021 ◽  
Vol 2103 (1) ◽  
pp. 012236
Author(s):  
O G Maksimova ◽  
A V Maksimov ◽  
V V Smirnov ◽  
V I Egorov ◽  
S V Osipov ◽  
...  

Abstract To study dynamic properties of a polymer coating, we consider a polymer chain with finite length. We take into account a chain bending rigidity and assume that the chain is located near an adsorbing flat surface of a solid. One part of the chain is fixed on the surface, and the second one remains free. It is supposed that the cause of chain stretching is the internal effective mean (molecular) field formed as a result of intermolecular interactions with free ends of other chains. Kinetic equations based on the Kubo method are obtained to calculate the relaxation time of the segments. The dependences of the long-range orientational order parameter and relaxation time on the adsorption parameter, the mean field coefficient and chain bending rigidity parameters are calculated. It is shown that a first-order phase transition occurs at the critical point, which is associated with a drastic change in the degree of the chain elongation. We discovered the “critical deceleration” effect, which consists in a sharp increase in the relaxation time near the critical point during the formation of surface polymer layers on the surface of a solid.


2015 ◽  
Vol 29 (18) ◽  
pp. 1550091 ◽  
Author(s):  
Zi-Wen Huang ◽  
Ji-Xuan Hou ◽  
Chun Xie ◽  
Hao Zhang

We investigated a highly coarse-grained polymer model — hard-sphere (HS) model. This model is characterized by its time-saving computation and strictly guaranteed uncrossability of polymer chains. Regarding the statistical and dynamic properties of HS model, our simulating results perfectly coincide with pre-existing scaling theory. Additionally, we point out that the power exponent of scaling relationship between its relaxation time and chain length is 2.2.


2011 ◽  
Vol 109 ◽  
pp. 410-414 ◽  
Author(s):  
Wei Wang

As one of the general mathematical models of polymers, self-interactive systems have been studied extensively. In this paper, however, we investigate the method on modifying the dynamic properties of self-interactive systems by using external inputs. The main idea is that, based on the basic principle of control systems, we will introduce the external inputs to the system. And we will pay more attention to the possible influence of the purposeful external factors on the dynamic properties. Some interesting results can be obtained mainly based on simulation. So we can find many new properties or dynamic characteristics about the system. The research may also provide people with the possibility of improving the properties of Brownian dynamics of polymer chains.


Sign in / Sign up

Export Citation Format

Share Document