Studies on the Development of Carbon Monoxide-Releasing Molecules: Potential Applications for the Treatment of Cardiovascular Dysfunction

2019 ◽  
Vol 10 ◽  
pp. 1423-1433 ◽  
Author(s):  
Yongjiao Sun ◽  
Zhichao Yu ◽  
Wenda Wang ◽  
Pengwei Li ◽  
Gang Li ◽  
...  

Pure WO3 sensors and Mn3O4/WO3 composite sensors with different Mn concentrations (1 atom %, 3 atom % and 5 atom %) were successfully prepared through a facile hydrothermal method. As gas sensing materials, their sensing performance at different temperatures was systematically investigated for gas detection. The devices displayed different sensing responses toward different gases at specific temperatures. The gas sensing performance of Mn3O4/WO3 composites (especially at 3 atom % Mn) were far improved compared to sensors based on pure WO3, where the improvement is related to the heterojunction formed between the two metal oxides. The sensor based on the Mn3O4/WO3 composite with 3 atom % Mn showed a high selective response to hydrogen sulfide (H2S), ammonia (NH3) and carbon monoxide (CO) at working temperatures of 90 °C, 150 °C and 210 °C, respectively. The demonstrated superior selectivity opens the door for potential applications in gas recognition and detection.


2008 ◽  
Vol 86 (9) ◽  
pp. 577-599 ◽  
Author(s):  
Robert T. Kinobe ◽  
Ryan A. Dercho ◽  
Kanji Nakatsu

The past decade has seen substantial developments in our understanding of the physiology, pathology, and pharmacology of heme oxygenases (HO), to the point that investigators in the field are beginning to contemplate therapies based on administration of HO agonists or HO inhibitors. A significant amount of our current knowledge is based on the judicious application of metalloporphyrin inhibitors of HO, despite their limitations of selectivity. Recently, imidazole-based compounds have been identified as potent and more selective HO inhibitors. This ‘next generation’ of HO inhibitors offers a number of desirable characteristics, including isozyme selectivity, negligible effects on HO protein expression, and physicochemical properties favourable for in vivo distribution. Some of the applications of HO inhibitors that have been suggested are treatment of hyperbilirubinemia, neurodegenerative disorders, certain types of cancer, and bacterial and fungal infections. In this review, we address various approaches to altering HO activity with a focus on the potential applications of second-generation inhibitors of HO.


Circulation ◽  
2018 ◽  
Vol 138 (Suppl_2) ◽  
Author(s):  
Jason J Rose ◽  
Qinzi Xu ◽  
Kaitlin A Bocian ◽  
Timothy N Bachman ◽  
Jian Hu ◽  
...  

Background: Carbon monoxide (CO) is the most common human poisoning. There is no antidote. One-third of hospitalized patients will have cardiac dysfunction and increased mortality. Little is known about the nature of cardiovascular dysfunction during acute CO poisoning. CO toxicity results from: (1) global hypoxia and decreased oxygen delivery through CO binding to hemoglobin, (2) inhibition of oxidative phosphorylation from CO binding to cytochrome c oxidase, and (3) ensuing superoxide injury. We have developed a recombinant neuroglobin molecule (rNgb) with a high affinity for CO, that can chelate CO from intrinsic heme proteins. Hypothesis: The addition of rNgb will scavenge CO from hemoglobin and cytochrome c oxidase, reversing CO-induced cardiovascular dysfunction. Methods: We inserted micromanometer-tip catheters into the left ventricle of ventilated, severely CO poisoned mice to study the mechanisms of CO-induced cardiovascular collapse. In a similar model, we measured blood pressure and heart rate of severely CO poisoned, ventilated mice through a carotid arterial catheter and treated with phosphate buffered saline (PBS) or rNgb. Hearts were isolated from these mice and we measured tissue respiration using a Clark-type oxygen electrode. We compared the respiration rates of these animals and compared with non-poisoned, sedated control mice. We also compared the enzymatic activity of electron transport chain complexes. Results and Conclusions: When compared to control mice (exposed to 21% oxygen/no CO), CO poisoned mice develop a decreased contractility index (-32.3% baseline vs. -10.8% in control, t-test, p=0.002), hypotension and death, indicating primary cardiac toxicity. CO-poisoned mice treated with PBS had heart tissue respiration that was 62.3% (+/- 7.5%) of sedated control mice (t-test, P=0.015). Treatment of mice with rNgb restored tissue respiration (P=0.037 versus PBS treated mice) similar to control values. CO poisoning reduced the activity level of complex IV in PBS treated mice (P=0.011), but levels were similar to control in rNgb treated mice. These molecular changes were associated with reversal of cardiovascular collapse in rNgb treated mice versus PBS, demonstrating the potential of rNgb as a CO poisoning antidote.


1998 ◽  
Vol 10 (3) ◽  
pp. 880-885 ◽  
Author(s):  
Stefanie L. Sharp ◽  
Gireesh Kumar ◽  
Edward P. Vicenzi ◽  
Andrew B. Bocarsly ◽  
Marija Heibel

2002 ◽  
Vol 68 (6) ◽  
pp. 2633-2636 ◽  
Author(s):  
Pin-Ching Maness ◽  
Sharon Smolinski ◽  
Anne C. Dillon ◽  
Michael J. Heben ◽  
Paul F. Weaver

ABSTRACT A hydrogenase linked to the carbon monoxide oxidation pathway in Rubrivivax gelatinosus displays tolerance to O2. When either whole-cell or membrane-free partially purified hydrogenase was stirred in full air (21% O2, 79% N2), its H2 evolution activity exhibited a half-life of 20 or 6 h, respectively, as determined by an anaerobic assay using reduced methyl viologen. When the partially purified hydrogenase was stirred in an atmosphere containing either 3.3 or 13% O2 for 15 min and evaluated by a hydrogen-deuterium (H-D) exchange assay, nearly 80 or 60% of its isotopic exchange rate was retained, respectively. When this enzyme suspension was subsequently returned to an anaerobic atmosphere, more than 90% of the H-D exchange activity was recovered, reflecting the reversibility of this hydrogenase toward O2 inactivation. Like most hydrogenases, the CO-linked hydrogenase was extremely sensitive to CO, with 50% inhibition occurring at 3.9 μM dissolved CO. Hydrogen production from the CO-linked hydrogenase was detected when ferredoxins of a prokaryotic source were the immediate electron mediator, provided they were photoreduced by spinach thylakoid membranes containing active water-splitting activity. Based on its appreciable tolerance to O2, potential applications of this hydrogenase are discussed.


Author(s):  
D. Loretto ◽  
J. M. Gibson ◽  
S. M. Yalisove ◽  
R. T. Tung

The cobalt disilicide/silicon system has potential applications as a metal-base and as a permeable-base transistor. Although thin, low defect density, films of CoSi2 on Si(111) have been successfully grown, there are reasons to believe that Si(100)/CoSi2 may be better suited to the transmission of electrons at the silicon/silicide interface than Si(111)/CoSi2. A TEM study of the formation of CoSi2 on Si(100) is therefore being conducted. We have previously reported TEM observations on Si(111)/CoSi2 grown both in situ, in an ultra high vacuum (UHV) TEM and ex situ, in a conventional Molecular Beam Epitaxy system.The procedures used for the MBE growth have been described elsewhere. In situ experiments were performed in a JEOL 200CX electron microscope, extensively modified to give a vacuum of better than 10-9 T in the specimen region and the capacity to do in situ sample heating and deposition. Cobalt was deposited onto clean Si(100) samples by thermal evaporation from cobalt-coated Ta filaments.


Author(s):  
D. L. Callahan ◽  
Z. Ball ◽  
H. M. Phillips ◽  
R. Sauerbrey

Ultraviolet laser-irradiation can be used to induce an insulator-to-conductor phase transition on the surface of Kapton polyimide. Such structures have potential applications as resistors or conductors for VLSI applications as well as general utility electrodes. Although the percolative nature of the phase transformation has been well-established, there has been little definitive work on the mechanism or extent of transformation. In particular, there has been considerable debate about whether or not the transition is primarily photothermal in nature, as we propose, or photochemical. In this study, cross-sectional optical microscopy and transmission electron microscopy are utilized to characterize the nature of microstructural changes associated with the laser-induced pyrolysis of polyimide.Laser-modified polyimide samples initially 12 μm thick were prepared in cross-section by standard ultramicrotomy. Resulting contraction in parallel to the film surface has led to distortions in apparent magnification. The scale bars shown are calibrated for the direction normal to the film surface only.


Author(s):  
Amanda K. Petford-Long ◽  
A. Cerezo ◽  
M.G. Hetherington

The fabrication of multilayer films (MLF) with layer thicknesses down to one monolayer has led to the development of materials with unique properties not found in bulk materials. The properties of interest depend critically on the structure and composition of the films, with the interfacial regions between the layers being of particular importance. There are a number of magnetic MLF systems based on Co, several of which have potential applications as perpendicular magnetic (e.g Co/Cr) or magneto-optic (e.g. Co/Pt) recording media. Of particular concern are the effects of parameters such as crystallographic texture and interface roughness, which are determined by the fabrication conditions, on magnetic properties and structure.In this study we have fabricated Co-based MLF by UHV thermal evaporation in the prechamber of an atom probe field-ion microscope (AP). The multilayers were deposited simultaneously onto cobalt field-ion specimens (for AP and position-sensitive atom probe (POSAP) microanalysis without exposure to atmosphere) and onto the flat (001) surface of oxidised silicon wafers (for subsequent study in cross-section using high-resolution electron microscopy (HREM) in a JEOL 4000EX. Deposi-tion was from W filaments loaded with material in the form of wire (Co, Fe, Ni, Pt and Au) or flakes (Cr). The base pressure in the chamber was around 8×10−8 torr during deposition with a typical deposition rate of 0.05 - 0.2nm/s.


2020 ◽  
Vol 13 (5) ◽  
pp. 1429-1461 ◽  
Author(s):  
Xiaona Li ◽  
Jianwen Liang ◽  
Xiaofei Yang ◽  
Keegan R. Adair ◽  
Changhong Wang ◽  
...  

This review focuses on fundamental understanding, various synthesis routes, chemical/electrochemical stability of halide-based lithium superionic conductors, and their potential applications in energy storage as well as related challenges.


Sign in / Sign up

Export Citation Format

Share Document