Method 11: Real-Time Breathing Zone Monitoring for Personal Respiratory Protection*

2010 ◽  
pp. 523-528
Author(s):  
Hyungyu Park ◽  
Seonghyun Park ◽  
Janghoo Seo

Fine particulate matter entering the body through breathing cause serious damage to humans. In South Korea, filter-type air purifiers are used to eliminate indoor fine particulate matter, and there has been a broad range of studies on the spread of fine particulate matter and air purifiers. However, earlier studies have not evaluated an operating method of air purifiers considering the inflow of fine particulate matter into the body or reduction performance of the concentration of fine particulate matter. There is a limit to controlling the concentration of fine particulate matter of the overall space where an air purifier is fixed in one spot as the source of indoor fine particulate matter is varied. Accordingly, this study analyzed changes in the concentration of indoor fine particulate matter through an experiment according to the discharging method and location of a fixed air purifier considering the inflow route of fine particulate matter into the body and their harmfulness. The study evaluated the purifiers’ performance in reducing the concentration of fine particulate matter in the occupants’ breathing zone according to the operation method in which a movable air purifier responds to the movement of occupants. The results showed the concentration of fine particulate matter around the breathing zone of the occupants had decreased by about 51 μg/m3 compared to the surrounding concentration in terms of the operating method in which an air purifier tracks occupants in real-time, and a decrease of about 68 μg/m3 in terms of the operating method in which an air purifier controls the zone. On the other hand, a real-time occupant tracking method may face a threshold due to the moving path of an air purifier and changes in the number of occupants. A zone controlling method is deemed suitable as an operating method of a movable air purifier to reduce the concentration of fine particulate matter in the breathing zone of occupants.


Author(s):  
Nicola Cherry ◽  
Jean-Michel Galarneau ◽  
David Kinniburgh ◽  
Bernadette Quemerais ◽  
Sylvia Tiu ◽  
...  

Abstract Objectives There is limited knowledge of exposure to polycyclic aromatic hydrocarbons (PAHs) in wildland firefighters, or of the effectiveness of interventions to reduce this. This study of wildland firefighters assessed whether PAHs were present and considered respiratory protection and enhanced skin hygiene as possible interventions. Methods 1-Hydroxypyrene (1-HP) was measured in urine samples collected pre-shift, post-shift, and next morning from wildland firefighters in Alberta and British Columbia. Skin wipes, collected pre- and post-shift, were analysed for eight PAHs. Breathing zone air samples were analysed for 11 PAHs. As pilot interventions, participants were randomized to either normal or enhanced skin hygiene. A sample of volunteers was assigned to a disposable N95 mask or a half facepiece mask with P100 organic vapour cartridge. Participants completed a brief questionnaire on activities post-shift and respiratory symptoms. Results Non-smoking firefighters (66 male and 20 female) were recruited from 11 fire crews. Air sampling pumps were carried for the full shift by 28 firefighters, 25 firefighters wore masks (14 N95 and 11 P100); 42 were assigned to the enhanced skin hygiene intervention. Sixty had hot spotting as their main task. Air monitoring identified PAHs (benzo(b,j,k)fluoranthene in particulates, phenanthrene in the gaseous phase) for 6 of the 11 crews. PAHs (largely naphthalene) were found post-shift on 40/84 skin wipes from the hand and 38/84 from jaw/throat. The mean increase in 1-HP in urine samples collected after the shift (compared with samples collected before the shift) was 66 ng g−1 creatinine (P < 0.001) with an increase over the shift found for 76% of participants. 1-HP in next morning urine samples was significantly lower than at the end of shift (a reduction of 39.3 ng g−1: P < 0.001). The amount of naphthalene on skin wipes was greater at the end of the shift (post) than at the start (pre). The mean post–pre weight difference of naphthalene on skin wipes taken from the hand was 0.96 ng wipe−1 (P = 0.01) and from the jaw/throat 1.28 ng wipe−1 (P = 0.002). The enhanced skin hygiene intervention lead to a larger reduction in 1-HP between end of shift and next morning urine samples but only for those with naphthalene on skin wipes at the end of shift. The difference in 1-HP concentration in urine samples collected before and after the shift was reduced for those wearing a mask (linear tend P = 0.063, one-sided). In multivariable models, 1-HP at end of shift was related to gaseous phase phenanthrene, estimated from air sampling [β = 318.2, 95% confidence interval (CI) 67.1–569.2]. Naphthalene on hand skin wipes reflected work in hot spotting during the shift (β = 0.53, 95% CI 0.22–0.86). Conclusions This study provided evidence of PAHs in the air and on the skin of many, but not all, fire crew. Absorbed PAHs, reflected in 1-HP in urine, increased over the shift. Results from the pilot interventions suggest that enhanced skin hygiene would reduce absorption post fire where PAHs had been accumulated on the skin, and that masks could be effective in reducing PAH inhalation exposure. Interventions to reduce PAH absorption are supported by the pilot work reported here and warrant further evaluation across a full fire season.


2018 ◽  
Vol 277 ◽  
pp. 232-240 ◽  
Author(s):  
Sergiy Cheberiachko ◽  
Olena Yavors’ka ◽  
Dmytro Radchuk ◽  
Andrii Yavorskyi

Two studies were conducted in the coal mines to evaluate worker exposures to a dust, and the effectiveness of air-purifying negative-pressure half mask respirators and was found that miners’ protection were insufficient. An elastomeric and filtering half-mask negative pressure respirators with (mid-efficiency) filters P2 (FFP2) were studied. Measurements of total dust concentrations in the in-mask and outer air were conducted simultaneously. Not identical sampling system led to an underestimation of the actual total inside dust concentration in the first study. The results have been corrected to reduce the systematic error. The inside total dust concentrations Ci exceeded national Permissible Exposure Limit (PEL) in most cases in both studies; in first GM Ci=24.7 mg/m3; in second 8.6 mg/m3. Protection factors were: from 2.9 to 6.9 in first study; and from 5.6 to 34 in second. Low efficiency of respirators can be caused by its non-continuous usage. High risk of miners’ occupational diseases should be reduced by decreasing the dust concentration in the breathing zone. It is advisable to check the possibility of improving respiratory protection of miners by powered air-purifying respirators.


2021 ◽  
Author(s):  
Sean M Kinahan ◽  
David B Silcott ◽  
Blake E Silcott ◽  
Ryan M Silcott ◽  
Peter J Silcott ◽  
...  

AbstractThe COVID-19 pandemic has reintroduced questions regarding the potential risk of SARS-CoV-2 exposure amongst passengers on an aircraft. Quantifying risk with computational fluid dynamics models or contact tracing methods alone is challenging, as experimental results for inflight biological aerosols is lacking. Using fluorescent aerosol tracers and real time optical sensors, coupled with DNA-tagged tracers for aerosol deposition, we executed ground and inflight testing on Boeing 767 and 777 airframes.Analysis here represents tracer particles released from a simulated infected passenger, in multiple rows and seats, to determine the exposure risk via penetration into breathing zones in that row and numerous rows ahead and behind the index case. We completed over 65 releases of 180,000,000 fluorescent particles from the source, with 40+ Instantaneous Biological Analyzer and Collector sensors placed in passenger breathing zones for real-time measurement of simulated virus particle penetration.Results from both airframes showed a minimum reduction of 99.54% of 1 µm aerosols from the index source to the breathing zone of a typical passenger seated directly next to the source. An average 99.97 to 99.98% reduction was measured for the breathing zones tested in the 767 and 777, respectively. Contamination of surfaces from aerosol sources was minimal, and DNA-tagged 3 µm tracer aerosol collection techniques agreed with fluorescent methodologies.


AIHAJ ◽  
1983 ◽  
Vol 44 (4) ◽  
pp. 280-285 ◽  
Author(s):  
CORINNE A. MARTINELLI ◽  
NAOMI H. HARLEY ◽  
MORTON LIPPMANN ◽  
BEVERLY S. COHEN

Author(s):  
Małgorzata Okrasa ◽  
Jörn Hitz ◽  
Aleksandra Nowak ◽  
Agnieszka Brochocka ◽  
Christoph Thelen ◽  
...  

Filtering nonwovens loaded with activated carbon are among the most popular materials used in the construction of filtering facepiece respirators (FFRs) with anti-odour properties that can be used for respiratory protection at workplaces where the occupational exposure limits of harmful substances are not exceeded. Such FFRs, in addition to a polymer filter material of varying effectiveness, also contain a layer of activated-carbon-loaded nonwoven filter, which limits the quantity of chemical compounds entering the breathing zone. The aim of this work was to analyse the influence of challenge concentration (20–120 ppm), relative humidity (2–70%), flow rate (20–55 L/min), and flow pattern (steady-state and pulsating) on the breakthrough of polymer/carbon nonwovens. A commercial activated-carbon-loaded nonwoven filter was used in this study. Its morphology and textural parameters were determined using optical microscopy, image processing, and nitrogen adsorption/desorption measurements at 77 K. Breakthrough experiments were carried out using cyclohexane vapours to assess adsorption characteristics of polymer/carbon media. The results showed that the breakthrough times decreased with increasing challenge concentration (up to 30%), relative humidity (up to 73%), and flow rate (up to 72%). The pulsating flow pattern was found to be more favourable in terms of odour reduction efficiency (up to 30%). The results indicate that all of these factors should be considered during selection and performance assessment of respirators used for odour relief.


Materials ◽  
2020 ◽  
Vol 13 (3) ◽  
pp. 712 ◽  
Author(s):  
Agnieszka Brochocka ◽  
Aleksandra Nowak ◽  
Katarzyna Majchrzycka ◽  
Michał Puchalski ◽  
Sławomir Sztajnowski

In this work, a multifunctional polymer composite is made using melt-blowing technology from polypropylene (88 wt.%) and poly (ethylene terephthalate) (12 wt.%) with the addition of functional modifiers, that is, 3 g of a superabsorbent polymer and 5 g of a biocidal agent (Biohaloysite). The use of modifiers is aimed at obtaining adequate comfort when using the target respiratory protection equipment (RPE) in terms of microclimate in the breathing zone and protection against harmful aerosols including bioaerosols. The developed production method is innovative in that the two powdered modifiers are simultaneously applied in the stream of elementary polymeric fibers by two independent injection systems. Aerosols of the modifiers are supplied via a specially designed channel in the central segment of the die assembly, reducing the amount of materials used in the production process and saving energy. The results show that the proposed method of incorporating additives into the fiber structure did not adversely affect the protective and functional properties of the resulting filtration nonwovens. The produced nonwoven composites are characterized by SEM, FTIR, and differential scanning calorimetry (DSC). Given their high filtration efficiency at 5%, satisfactory airflow resistance (~200 Pa), very good antimicrobial activity, and excellent water absorption capacity, the obtained multifunctional nonwoven composites may be successfully used in filtering respiratory protective devices.


2018 ◽  
Vol 63 (1) ◽  
pp. 34-44 ◽  
Author(s):  
Anila Bello ◽  
Christopher Mugford ◽  
Amanda Murray ◽  
Susan Shepherd ◽  
Susan R Woskie

Abstract Objectives Exposures to respirable crystalline silica (RCS) and respirable dust (RD) were investigated during demolition, crushing, and chipping at several Massachusetts construction sites. Methods Personal breathing zone samples (n = 51) were collected on operating engineers working at demolition and crushing sites, laborers performing miscellaneous tasks at demolition sites, crushing machine tenders at crushing sites, and chipping workers at substructure bridge repair sites. Area samples (n = 33) were collected at the perimeter of demolition and crushing sites to assess potential bystanders’ exposures. Exposures ‘with’ and ‘without’ the use of dust suppression methods were compared when possible. RD samples were analyzed for crystalline silica content with Fourier Transform Infrared Spectrophotometry (FT-IR) according to the National Institute for Occupational Safety and Health (NIOSH) Method 7602. Statistical analyses of the exposure data were performed in SAS version 9.4. Results Chipping workers had the highest exposure levels [the geometric mean (GM) time-weighted average (TWA) for RCS was 527 µg/m3 and the GM for RD was 4750 µg/m3]. The next highest exposures were among crushing machine tenders (RCS GM of 93.3 µg/m3 and RD GM of 737.6 µg/m3), while laborers and operating engineers had the lowest exposures (RCS GM of 17.0 and 6.2 µg/m3, respectively). Personal 8-h TWA RCS exposures were higher than the new OSHA permissible exposure limit (PEL) of 50 µg/m3 for 80% of samples collected on chipping workers (n = 31) and 50% of samples collected on crushing machine tenders (n = 8). Operating engineers (n = 9) and laborers (n = 3) had RCS exposures lower than OSHA PEL. The highest concentrations measured would have exceeded the PEL within 15 min chipping and within 2 h of crushing with no further exposure. Chipping workers’ RCS exposures were higher than OSHA PEL even when they were adjusted to account for the assigned protection factor of the half-face N95 cartridge respirators used during chipping. Exposures of crushing tenders were reduced to levels under the OSHA PEL when a water spraying system in crushing machines was utilized, but not when a water cannon machine was used. Area samples at demolition and crushing sites indicate overall lower exposures than the PEL, however, bystander workers at crushing sites could be exposed to higher levels compared to demolition sites. Real-time dust monitoring during demolition indicate very high short-term peak exposures. Conclusions Controlling or reducing crystalline silica exposures to levels under the new OSHA PEL of 50 µg/m3 remains challenging for chipping workers and crushing machine tenders. Even with the use of dust suppression controls, respiratory protection may be required for various tasks.


PLoS ONE ◽  
2021 ◽  
Vol 16 (12) ◽  
pp. e0246916
Author(s):  
Sean M. Kinahan ◽  
David B. Silcott ◽  
Blake E. Silcott ◽  
Ryan M. Silcott ◽  
Peter J. Silcott ◽  
...  

The COVID-19 pandemic has reintroduced questions regarding the potential risk of SARS-CoV-2 exposure amongst passengers on an aircraft. Quantifying risk with computational fluid dynamics models or contact tracing methods alone is challenging, as experimental results for inflight biological aerosols is lacking. Using fluorescent aerosol tracers and real time optical sensors, coupled with DNA-tagged tracers for aerosol deposition, we executed ground and inflight testing on Boeing 767 and 777 airframes. Analysis here represents tracer particles released from a simulated infected passenger, in multiple rows and seats, to determine the exposure risk via penetration into breathing zones in that row and numerous rows ahead and behind the index case. We present here conclusions from 118 releases of fluorescent tracer particles, with 40+ Instantaneous Biological Analyzer and Collector sensors placed in passenger breathing zones for real-time measurement of simulated virus particle penetration. Results from both airframes showed a minimum reduction of 99.54% of 1 μm aerosols from the index source to the breathing zone of a typical passenger seated directly next to the source. An average 99.97 to 99.98% reduction was measured for the breathing zones tested in the 767 and 777, respectively. Contamination of surfaces from aerosol sources was minimal, and DNA-tagged 3 μm tracer aerosol collection techniques agreed with fluorescent methodologies.


Sign in / Sign up

Export Citation Format

Share Document