Use of a liquid shock tube as a device for the study of material deformation under impulsive loading conditions

2004 ◽  
Vol 218 (1) ◽  
pp. 39-51 ◽  
Author(s):  
B W Skews ◽  
O E Kosing ◽  
R J Hattingh
Keyword(s):  
Shock Tube ◽  
Deformation Process ◽  
High Speed ◽  
Pressure Pulse ◽  
Applied Pressure ◽  
Impulsive Loading ◽  
High Speed Photography ◽  
Material Deformation ◽  
Metal Plates ◽  
Versatile Tool

The deformation of metal plates and tubes achievable through the use of liquid shock waves generated in a shock tube is studied, with reference to both free-forming and forming the metal into dies, as well as to imprinting detailed features. The process is highly controllable, in terms of the magnitude and duration of the applied pressure pulse. A projectile is fired into a liquid column producing a high-pressure liquid shock wave which impinges on the testpiece. Different projectile materials, driving pressures and impact velocities are used to alter the energy and impulse transmitted. A particular attraction of its use in a laboratory is the application of high-speed photography to the deformation process. Illustration of the application of the facility to slamming studies and to fracture of brittle materials is included. It is concluded that the techniques employed offer a useful and versatile tool for many studies of material deformation.

scholarly journals Shock Tube as an Impulsive Application Device

2017 ◽  
Vol 2017 ◽  
pp. 1-12 ◽  
Author(s):  
Soumya Ranjan Nanda ◽  
Sumit Agarwal ◽  
Vinayak Kulkarni ◽  
Niranjan Sahoo
Keyword(s):  
Heat Transfer ◽  
Shock Tube ◽  
High Speed ◽  
Force Measurement ◽  
Peak Load ◽  
Wave Force ◽  
Impulsive Loading ◽  
Force Balance ◽  
Test Model ◽  
Impulse Facility

Current investigations solely focus on application of an impulse facility in diverse area of high-speed aerodynamics and structural mechanics. Shock tube, the fundamental impulse facility, is specially designed and calibrated for present objectives. Force measurement experiments are performed on a hemispherical test model integrated with the stress wave force balance. Similar test model is considered for heat transfer measurements using coaxial thermocouple. Force and heat transfer experiments demonstrated that the strain gauge and thermocouple have lag time of 11.5 and 9 microseconds, respectively. Response time of these sensors in measuring the peak load is also measured successfully using shock tube facility. As an outcome, these sensors are found to be suitable for impulse testing. Lastly, the response of aluminum plates subjected to impulsive loading is analyzed by measuring the in-plane strain produced during deformation. Thus, possibility of forming tests in shock is also confirmed.

Behavior of Soft Spheres During Impact by High-Speed Photography

1983 ◽  
Vol 105 (1) ◽  
pp. 67-73 ◽  
Author(s):  
Yoichi Tatara
Keyword(s):  
Deformation Process ◽  
High Speed ◽  
High Impact ◽  
High Speed Photography ◽  
Tennis Ball ◽  
Hertz Model ◽  
Hertz Theory ◽  
Soft Spheres ◽  
Almost All ◽  
The Impact

Previously, it has been verified experimentally for durations of impact that the Hertz theory (the quasi-statical theory) holds during impact of spheres without any exception. However, no measurement of duration of impact has been presented for spheres of materials other than metal. This study presents exceptional cases of impacts of spheres during which the Hertz model does not directly hold. By the use of a high-speed camera running at a speed of 5000 frames/s, durations of impact are measured directly for impacts of two solid rubber spheres of the same size and content and impacts of a soft ball (Japanese type-soft tennis ball) on a rigid foundation. As a result, the measured durations of impact in the two impacting cases are found to be decreased as the impact velocity is increased, similar in tendency to durations of impact of elastic metal spheres during which the Hertz theory holds. However, the measured durations of impact are found to be clearly shorter than results calculated according to the Hertz theory, approximately half in the former impacts at high impact velocities, and about 70 percent of the Hertzian results in the latter impacts at almost all impact velocities. Deformation process of the ball impacting on the foundation is also presented to indicate both durations in the compressive process and the restitution one to be shorter than those expected by the Hertz theory. The other results observed on the films are noted to investigate the origin of the great discrepancies between the measured and Hertzian durations (that is, the impacting mechanism of the rubber spheres or the rubber ball packed with air treated here).

Preferentially Filled Foam Core Corrugated Steel Sandwich Structures for Improved Blast Performance

2015 ◽  
Vol 82 (6) ◽  
Author(s):  
Murat Yazici ◽  
Jefferson Wright ◽  
Damien Bertin ◽  
Arun Shukla
Keyword(s):  
Shock Tube ◽  
High Speed ◽  
Numerical Models ◽  
Front Face ◽  
High Speed Photography ◽  
Back Face ◽  
Foam Filling ◽  
Shock Impact ◽  
Foam Filled ◽  
Blast Performance

The mechanisms by which different morphologies of preferentially foam filled corrugated panels deform under planar blast loading, transmit shock, and absorb energy are investigated experimentally and numerically for the purpose of mitigating back-face deflection (BFD). Six foam filling configurations were fabricated and subjected to shock wave loading generated by a shock tube. Shock tube experimental results obtained from high-speed photography were used to validate the numerical models. The validated numerical model was further used to analyze 24 different core configurations. The experimental and numerical results show that soft/hard arrangements (front to back) are the most effective for blast resistivity as determined by the smallest BFDs. The number of foam filled layers in each specimen affected the amount of front-face deflections (FFDs), but did relatively little to alter BFDs, and results do not support alternating foam filling layers as a valid method to attenuate shock impact.

The acceleration of solid particles subjected to cavitation nucleation

2008 ◽  
Vol 610 ◽  
pp. 157-182 ◽  
Author(s):  
BRAM M. BORKENT ◽  
MANISH ARORA ◽  
CLAUS-DIETER OHL ◽  
NICO DE JONG ◽  
MICHEL VERSLUIS ◽  
...  
Keyword(s):  
High Speed ◽  
Pressure Pulse ◽  
Particle System ◽  
Volume Growth ◽  
Solid Particles ◽  
Spherical Particles ◽  
High Speed Photography ◽  
Neck Formation ◽  
Cavitation Inception ◽  
Nucleation Sites

The cavity–particle dynamics at cavitation inception on the surface of spherical particles suspended in water and exposed to a strong tensile stress wave is experimentally studied with high-speed photography. Particles, which serve as nucleation sites for cavitation bubbles, are set into a fast translatory motion during the explosive growth of the cavity. They reach velocities of ~40 ms−1 and even higher. When the volume growth of the cavity slows down, the particle detaches from the cavity through a process of neck-breaking, and the particle is shot away. The experimental observations are simulated with (i) a spherical cavity model and (ii) with an axisymmetric boundary element method (BEM). The input for both models is a pressure pulse, which is obtained from the observed radial cavity dynamics during an individual experiment. The model then allows us to calculate the resulting particle trajectory. The cavity shapes obtained from the BEM calculations compare well with the photographs until neck formation occurs. In several cases we observed inception at two or more locations on a single particle. Moreover, after collapse of the primary cavity, a second inception was often observed. Finally, an example is presented to demonstrate the potential application of the cavity–particle system as a particle cannon, e.g. in the context of drug delivery into tissue.

Axis-Switching Behavior of Liquid Jets Issued from Non-Circular Nozzles Under Low-Intermediate Pressure

2021 ◽  
Vol 37 (2) ◽  
pp. 367-378
Author(s):  
Lin Hua ◽  
Hong Li ◽  
Yue Jiang
Keyword(s):  
Deformation Process ◽  
High Speed ◽  
Sprinkler Irrigation ◽  
High Speed Photography ◽  
Irrigation Systems ◽  
Intermediate Pressure ◽  
Water Jets ◽  
Switching Phenomenon ◽  
Circular Jets ◽  
Axis Switching

HighlightsThe flow behavior of water jets discharged from different orifices was investigated.High-speed photography (HSP) was used to obtain surface structures and spread characteristics of water jets.The deformation process in axis switching related to the corner vortices effect of non-circular jets was researched by numerical simulation.The axis switching of non-circular jets enhances entrainment ability of the jet.ABSTRACT. Low-intermediate pressure sprinkler irrigation systems are important research topics in the field of water-saving irrigation. Non-circular nozzles improve spray uniformity at lower pressures and are key components of sprinkler irrigation systems. In this article, the behavior of discharged water jets from nozzles with circular, square, and equilateral triangular orifices designed with the same flow rate was investigated. High-speed photography (HSP) was used to capture jet characteristics in the near field (z<20D). The largest spread angle was obtained for the square jet, which was on average 37% larger than that of the circular jet. In addition, numerical simulations were performed to analyze the axis-switching process using the large-eddy simulation (LES) method and the coupled level-set and volume of fluid (CLSVOF) method. The axis-switching phenomenon was observed in non-circular jets, in which surrounding air mixed with the jet and promoted the formation of thin diaphragm structures. The deformation process that occurs in axis switching is described according to the simulated vorticity and velocity fields. The research results suggest the axis-switching phenomenon is induced by corner vortex motions produced by the polygonal orifice, which accelerate the decay of the axial velocity and increase the jet entrainment rate. Thus, the effect of corner vortices should be considered in the design of polygonal nozzles. Keywords: Axis switching, High-speed photography, Liquid jet, Low-intermediate pressure sprinkler irrigation, Non-circular nozzle, Numerical simulation.

Crack divergence phenomena in tempered glass

2020 ◽  
Vol 13 (3) ◽  
pp. 115-129
Author(s):  
Shin’ichi Aratani
Keyword(s):  
Optimal Design ◽  
High Speed ◽  
Glass Plate ◽  
Acute Angle ◽  
Divergence Angle ◽  
High Speed Photography ◽  
Tempered Glass ◽  
Thick Glass

High speed photography using the Cranz-Schardin camera was performed to study the crack divergence and divergence angle in thermally tempered glass. A tempered 3.5 mm thick glass plate was used as a specimen. It was shown that two types of bifurcation and branching existed as the crack divergence. The divergence angle was smaller than the value calculated from the principle of optimal design and showed an acute angle.

Experimental study of hydrodynamic effects in the inverse water hydrocarbon emulsions flow in microchannels

2016 ◽  
Vol 11 (1) ◽  
pp. 30-37 ◽  
Author(s):  
A.A. Rakhimov ◽  
A.T. Akhmetov
Keyword(s):  
High Speed ◽  
Petroleum Industry ◽  
Chemical Compounds ◽  
High Viscosity ◽  
Blocking Effect ◽  
High Speed Photography ◽  
Simple Chemical ◽  
Reported Study ◽  
Dynamic Blocking ◽  
Hydrodynamic Effects

The paper presents results of hydrodynamic and rheological studies of the inverse water hydrocarbon emulsions. The success of the application of invert emulsions in the petroleum industry due, along with the high viscosity of the emulsion, greatly exceeding the viscosity of the carrier phase, the dynamic blocking effect, which consists in the fact that the rate of flow of emulsions in capillary structures and cracks falls with time to 3-4 orders, despite the permanent pressure drop. The reported study shows an increase in viscosity with increasing concentration or dispersion of emulsion. The increase in dispersion of w/o emulsion leads to an acceleration of the onset of dynamic blocking. The use of microfluidic devices, is made by soft photolithography, along with high-speed photography (10,000 frames/s), allowed us to see in the blocking condition the deformation of the microdroplets of water in inverse emulsion prepared from simple chemical compounds.

Sign in / Sign up

Export Citation Format

Share Document