Wear, Performance and Emissions of a Two-Stroke Engine Running on Palm Oil Methyl Ester Blended Lubricant

1996 ◽  
Vol 210 (4) ◽  
pp. 213-219 ◽  
Author(s):  
H H Masjuki ◽  
M A Maleque
Keyword(s):  
Methyl Ester ◽  
Palm Oil ◽  
Gasoline Engine ◽  
Engine Performance ◽  
Lubricating Oil ◽  
Wear Behaviour ◽  
Exhaust Gas ◽  
Piston Rings ◽  
Gasoline Engines ◽  
Performance And Emissions

Results of study on wear of piston rings, engine performance and exhaust gas emissions of palm oil methyl ester (POME) as a lubricating oil additive in a two-stroke gasoline engine test are presented. Piston ring wear behaviour was monitored as a function of running time. The power output and brake specific fuel consumption of the engine were measured at different speeds. Varnish/lacquer and carbon deposit on the spark plug electrode, cylinder and piston heads as well as exhaust gas (CO2, CO and O2) emission were measured. For comparison purposes, two types of commercial lubricating oils, viz. oil A and oil B were used. The wear resistance of piston rings with POME blending lubrication was found to be greater than the pure commercial oil lubrication. Other results indicate that the POME acts as an additive which improves the engine performance and exhaust emissions of two-stroke gasoline engines.

An experimental study on fuel energy saving in gasoline engines using GNP as a lubricant additive

2021 ◽  
pp. 146808742110396
Author(s):  
Gurtej Singh ◽  
Mohammad Farooq Wani ◽  
Mohammad Marouf Wani
Keyword(s):  
Piston Ring ◽  
Energy Savings ◽  
Gasoline Engine ◽  
Engine Performance ◽  
Mechanical Efficiency ◽  
Lubricant Additive ◽  
Lubricating Oil ◽  
Engine Torque ◽  
Gasoline Engines ◽  
Improved Performance

This study concentrates on enhancing the performance of the gasoline engine through nano-lubrication. The effect of Graphene nano-platelets (GNP) as lubricant additives in SAE 15W40 oil on the fuel energy consumption and piston ring wear is investigated. GNP-filled lubricating oil boosted the brake strength, engine torque, and mechanical efficiency, whereas the gasoline engine’s brake specific fuel consumption (BSFC) decreased by 5.3%–6.5% due to a 1.7%–3.46% improvement in engine mechanical efficiency. Further, emission results showed that the GNP-filled lubricating oil reduced the emissions of the engine by approximately 3%–6% as compared to the virgin lubricating oil. Furthermore, the piston ring wear was found to reduce by using GNP-filled nano-lubricant. The characterization of the worn piston ring surfaces showed that the tribo-film formed on wear tracks resulted in the improved performance of the engine thereby reducing abrasive wear and surface roughness. From these studies, an attempt has been made to co-relate engine performance characteristics with tribological perception to contribute in the direction of energy savings and fuel economy.

scholarly journals A Comparison of Ethanol, Methanol, and Butanol Blending with Gasoline and Its Effect on Engine Performance and Emissions Using Engine Simulation

Processes ◽  
2021 ◽  
Vol 9 (8) ◽  
pp. 1322
Author(s):  
Simeon Iliev
Keyword(s):  
Alternative Fuels ◽  
Fossil Fuels ◽  
Gasoline Engine ◽  
Engine Performance ◽  
Exhaust Emissions ◽  
Engine Simulation ◽  
Engine Model ◽  
Fuel Blends ◽  
Performance And Emissions ◽  
Blended Fuels

Air pollution, especially in large cities around the world, is associated with serious problems both with people’s health and the environment. Over the past few years, there has been a particularly intensive demand for alternatives to fossil fuels, because when they are burned, substances that pollute the environment are released. In addition to the smoke from fuels burned for heating and harmful emissions that industrial installations release, the exhaust emissions of vehicles create a large share of the fossil fuel pollution. Alternative fuels, known as non-conventional and advanced fuels, are derived from resources other than fossil fuels. Because alcoholic fuels have several physical and propellant properties similar to those of gasoline, they can be considered as one of the alternative fuels. Alcoholic fuels or alcohol-blended fuels may be used in gasoline engines to reduce exhaust emissions. This study aimed to develop a gasoline engine model to predict the influence of different types of alcohol-blended fuels on performance and emissions. For the purpose of this study, the AVL Boost software was used to analyse characteristics of the gasoline engine when operating with different mixtures of ethanol, methanol, butanol, and gasoline (by volume). Results obtained from different fuel blends showed that when alcohol blends were used, brake power decreased and the brake specific fuel consumption increased compared to when using gasoline, and CO and HC concentrations decreased as the fuel blends percentage increased.

Performance Analysis and Improvement Approach of HEV Extended Expansion Gasoline Engine

2011 ◽  
Vol 317-319 ◽  
pp. 1999-2006
Author(s):  
Yu Wan ◽  
Ai Min Du ◽  
Da Shao ◽  
Guo Qiang Li
Keyword(s):  
Mathematical Model ◽  
Performance Analysis ◽  
Fuel Consumption ◽  
Economic Performance ◽  
Gasoline Engine ◽  
Engine Performance ◽  
Valve Train ◽  
Gasoline Engines ◽  
Simulation Results ◽  
Negative Impacts

According to the boost mathematical model verified by experiments, the valve train of traditional gasoline engine is optimized and improved to achieve extended expansion cycle. The simulation results of extended expansion gasoline engine shows that the extended expansion gasoline engine has a better economic performance, compared to traditional gasoline engines. The average brake special fuel consumption (BSFC) can reduce 22.78 g / kW•h by LIVC, but the negative impacts of extended expansion gasoline engine restrict the potential of extended expansion gasoline engine. This paper analyzes the extended expansion gasoline engine performance under the influence of LIVC, discusses the way to further improve extended expansion gasoline engine performance.

Influence of Low Ambient Temperatures on the Exhaust Gas and Deposit Composition of Gasoline Engines

2021 ◽  
pp. 1-11
Author(s):  
Dominik Appel ◽  
Fabian P. Hagen ◽  
Uwe Wagner ◽  
Thomas Koch ◽  
Henning Bockhorn ◽  
...  
Keyword(s):  
Internal Combustion Engines ◽  
Gasoline Engine ◽  
Cold Start ◽  
Operating Conditions ◽  
Pollutant Emissions ◽  
Ex Situ ◽  
Exhaust Gas ◽  
Gasoline Engines ◽  
Ambient Temperatures ◽  
Aftertreatment Systems

Abstract To comply with future emission regulations for internal combustion engines, system-related cold-start conditions in short-distance traffic constitute a particular challenge. Under these conditions, pollutant emissions are seriously increased due to internal engine effects and unfavorable operating conditions of the exhaust aftertreatment systems. As a secondary effect, the composition of the exhaust gases has a considerable influence on the deposition of aerosols via different deposition mechanisms and on fouling processes of exhaust gas-carrying components. Also, the performance of exhaust gas aftertreatment systems may be affected disadvantageously. In this study, the exhaust gas and deposit composition of a turbocharged three-cylinder gasoline engine is examined in-situ upstream of the catalytic converter at ambient and engine starting temperatures of -22 °C to 23 °C using a Fourier-transform infrared spectrometer and a particle spectrometer. For the cold start investigation, a modern gasoline engine with series engine periphery is used. In particular, the investigation of the behavior of deposits in the exhaust system of gasoline engines during cold start under dynamic driving conditions represents an extraordinary challenge due to an average lower soot concentration in the exhaust gas compared to diesel engines and so far, has not been examined in this form. A novel sampling method allows ex-situ analysis of formed deposits during a single driving cycle. Both, particle number concentration and the deposition rate are higher in the testing procedure of Real Driving Emissions (RDE) than in the inner-city part of the Worldwide harmonized Light vehicles Test Cycle (WLTC). In addition, reduced ambient temperatures increase the amount of deposits, which consist predominantly of soot and to a minor fraction of volatile compounds. Although the primary particle size distributions of the deposited soot particles do not change when boundary conditions change, the degree of graphitization within the particles increases with increasing exhaust gas temperature.

scholarly journals Modification of a Direct Injection Diesel Engine in Improving the Ignitability and Emissions of Diesel–Ethanol–Palm Oil Methyl Ester Blends

Energies ◽  
2019 ◽  
Vol 12 (14) ◽  
pp. 2644 ◽  
Author(s):  
Norhidayah Mat Taib ◽  
Mohd Radzi Abu Mansor ◽  
Wan Mohd Faizal Wan Mahmood
Keyword(s):  
Diesel Engine ◽  
Methyl Ester ◽  
Ambient Temperature ◽  
Palm Oil ◽  
Compression Ratio ◽  
Direct Injection ◽  
Cetane Number ◽  
Engine Performance ◽  
Injection Timing ◽  
Injection Strategies

Blending diesel with biofuels, such as ethanol and palm oil methyl ester (PME), enhances the fuel properties and produces improved engine performance and low emissions. However, the presence of ethanol, which has a small cetane number and low heating value, reduces the fuel ignitability. This work aimed to study the effect of injection strategies, compression ratio (CR), and air intake temperature (Ti) modification on blend ignitability, combustion characteristics, and emissions. Moreover, the best composition of diesel–ethanol–PME blends and engine modification was selected. A simulation was also conducted using Converge CFD software based on a single-cylinder direct injection compression ignition Yanmar TF90 engine parameter. Diesel–ethanol–PME blends that consist of 10% ethanol with 40% PME (D50E10B40), D50E25B25, and D50E40B10 were selected and conducted on different injection strategies, compression ratios, and intake temperatures. The results show that shortening the injection duration and increasing the injected mass has no significant effect on ignition. Meanwhile, advancing the injection timing improves the ignitability but with weak ignition energy. Therefore, increasing the compression ratio and ambient temperature helps ignite the non-combustible blends due to the high temperature and pressure. This modification allowed the mixture to ignite with a minimum CR of 20 and Ti of 350 K. Thus, blending high ethanol contents in a diesel engine can be applied by advancing the injection, increasing the CR, and increasing the ambient temperature. From the emission comparison, the most suitable mixtures that can be operated in the engine without modification is D50E25B25, and the most appropriate modification on the engine is by increasing the ambient temperature at 350 K.

Sign in / Sign up

Export Citation Format

Share Document