scholarly journals Coal deposits of Turkey: properties and importance on energy demand

2013 ◽  
Vol 47 (4) ◽  
pp. 2111 ◽  
Author(s):  
R. G. Oskay ◽  
H. Inaner ◽  
A. I. Karayigit ◽  
K. Christanis
Keyword(s):  
Energy Supply ◽  
Energy Demand ◽  
Electricity Generation ◽  
Power Plants ◽  
Fossil Fuels ◽  
Thermal Power ◽  
Low Rank ◽  
Coal Deposits ◽  
Coal Reserves ◽  
Low Rank Coals

In the last two decades electricity generation and consumption in Turkey was increasing steadily. Around 80% of the electricity generated is derived from fossil fuels such as imported natural gas and oil, and domestic coal. As the energy policy now is focusing on reducing the dependency on imported fuels, coal, particularly this of low-rank, is becoming important for the country. Latest explorations showed that total coal reserves of Turkey reach to 13 Gt with low-rank coals (i.e. lignite and sub-bituminous) being dominant. Coal deposits, formed under various conditions and in various geological times, are widely spread over the territory. The most significant deposits are of Tertiary, especially Neogene age. Neogene coals are most appropriate for combustion in the thermal power plants due to the high total reserves despite the high ash yields and the low calorific values. We imply that applying reasonable exploitation planning and appropriate washing techniques, coal will play a key role in future energy supply of the country.

scholarly journals Spatial assessment of the distribution and potential of bioenergy resources in Kazakhstan

2018 ◽  
Vol 45 ◽  
pp. 217-225 ◽  
Author(s):  
Asima Koshim ◽  
Marat Karatayev ◽  
Michèle L. Clarke ◽  
William Nock
Keyword(s):  
Energy Production ◽  
Power Plants ◽  
Fossil Fuels ◽  
Oil And Gas ◽  
Thermal Power ◽  
Policy Interventions ◽  
Renewable Energy Production ◽  
Bioenergy Generation ◽  
Coal Reserves ◽  
Significant Opportunity

Abstract. Kazakhstan is naturally rich in fossil fuels and its economy is strongly linked to oil and gas exports. Significant coal reserves have led to an energy mix that is dominated by aging and polluting thermal power plants. Yet Kazakhstan comprises mainly grassland steppe where agriculture and livestock pastoralism dominate offering the potential for cleaner, renewable energy production from a range of agricultural and forestry wastes. Here we analyse the spatial distribution and bioenergy generation potential of different feedstocks using an ArcGIS platform and demonstrate a significant opportunity for a range of bioenergy technologies. We recommend a number of policy interventions to enable Kazakhstan to make a transition to cleaner, more accessible and locally generated supply which is also sustainable and provide a waste management solution.

scholarly journals Energy Storage and Installed Wind Capacity Requirements for the Substitution of Fossil Fuels in the Electricity Generation Sector

2021 ◽  
Vol 03 (03) ◽  
pp. 1-1
Author(s):  
Efstathios E. Michaelides ◽  
Keyword(s):  
Energy Storage ◽  
Energy Demand ◽  
Electricity Generation ◽  
Power Plants ◽  
Fossil Fuels ◽  
Fossil Fuel ◽  
Storage Capacity ◽  
Renewable Energy Sources ◽  
Energy Storage Capacity ◽  
Fossil Fuel Power Plants

The impending adverse effects of Global Climate Change encourages the substitution of fossil fuels with non-carbon sources for electricity generation. However, while fossil fuel power plants may generate electric power at demand, the most abundant renewable energy sources–wind and solar–are intermittent or periodically variable. This necessitates the development of adequate energy storage at the utility/grid level. Using actual data for the hourly energy demand in the ERCOT electricity grid, this study examines the electricity supply-demand equilibrium and determines the necessary energy storage capacity for the substitution, first, of the coal power plants and, secondly, of all the fossil fuel power plants. The calculations show that, if the natural gas, intermediate-load power plants continue to be available, all coal units may be substituted with wind farms without the need for energy storage. When all the fossil fuel units are to be substituted, significant energy storage capacity is required, approximately 45.3 million m3. The calculations also show that the further development of nuclear energy and additional solar energy units reduce the requirements for energy storage and, also lessen the energy dissipation in the storage-recovery process.

scholarly journals CO2 CONTENT OF GREEK LIGNITE: THE CASE OF PROASTIO LIGNITE DEPOSIT IN PTOLEMAIS BASIN, NORTHERN GREECE

2017 ◽  
Vol 43 (5) ◽  
pp. 2274
Author(s):  
Α. Metaxas ◽  
Α.Ν. Georgakopoulos ◽  
D.Μ.Μ. Karageorgiou ◽  
G. Papanikolaou ◽  
E.D. Karageorgiou
Keyword(s):  
Carbon Dioxide ◽  
Carbon Dioxide Emissions ◽  
Electricity Generation ◽  
Power Plants ◽  
Fossil Fuels ◽  
Depositional Environment ◽  
Fossil Fuel ◽  
Thermal Power ◽  
Geological Storage ◽  
Northern Greece

Lignite is an important energy source for Greece, which severely relies on this fossil fuel for electricity generation over the years. The lignite combustion, however, releases a significant amount of carbon dioxide to the atmosphere per unit of energy generated, more than does the combustion of other fossil fuels. On the other hand, there is a growing concern over the possible consequences of global warming due to the increase of carbon dioxide in the atmosphere (a major greenhouse gas). Additionally, there is also a need for accurate estimates of carbon dioxide emissions. There are many factors resulting in the increase of CO2 content in lignite such as their formation and depositional environment, the possible presence of fossils, and their rank. In the present paper the CO2 content of the Proastio lignite deposit, Ptolemais Basin, is studied, in relation to the depositional palaeo-environment. An interpretation of CO2 variation with depth, age and surrounding rocks is also attempted. CO2 content of Proastio deposit is compared with this of other lignite deposits in the Ptolemais Basin, of various types and ages. Finally, the effect of CO2 content in the combustion of lignite is studied, while the possibility of the geological storage of the emitted carbon dioxide is explored after its capture from the Thermal Power Plants (CCS technology).

Fuzzy multi-objective decision making approach for nuclear power plant installation

2020 ◽  
Vol 39 (5) ◽  
pp. 6339-6350
Author(s):  
Esra Çakır ◽  
Ziya Ulukan
Keyword(s):  
Linear Programming ◽  
Power Plant ◽  
Nuclear Power Plant ◽  
Energy Supply ◽  
Energy Demand ◽  
Nuclear Power ◽  
Power Plants ◽  
Total Duration ◽  
Objective Functions ◽  
Multi Objective

Due to the increase in energy demand, many countries suffer from energy poverty because of insufficient and expensive energy supply. Plans to use alternative power like nuclear power for electricity generation are being revived among developing countries. Decisions for installation of power plants need to be based on careful assessment of future energy supply and demand, economic and financial implications and requirements for technology transfer. Since the problem involves many vague parameters, a fuzzy model should be an appropriate approach for dealing with this problem. This study develops a Fuzzy Multi-Objective Linear Programming (FMOLP) model for solving the nuclear power plant installation problem in fuzzy environment. FMOLP approach is recommended for cases where the objective functions are imprecise and can only be stated within a certain threshold level. The proposed model attempts to minimize total duration time, total cost and maximize the total crash time of the installation project. By using FMOLP, the weighted additive technique can also be applied in order to transform the model into Fuzzy Multiple Weighted-Objective Linear Programming (FMWOLP) to control the objective values such that all decision makers target on each criterion can be met. The optimum solution with the achievement level for both of the models (FMOLP and FMWOLP) are compared with each other. FMWOLP results in better performance as the overall degree of satisfaction depends on the weight given to the objective functions. A numerical example demonstrates the feasibility of applying the proposed models to nuclear power plant installation problem.

A Review on Utilization of Fly- Ash and Pond-Ash as a Partial Replacement of Cement in Concrete Mix Design

2018 ◽  
pp. 413-418
Author(s):  
Harshkumar Patel ◽  
Yogesh Patel
Keyword(s):  
Fly Ash ◽  
Electricity Generation ◽  
Power Plants ◽  
Renewable Energy Sources ◽  
Thermal Power ◽  
Strength Test ◽  
Partial Replacement ◽  
Pond Ash ◽  
Research Activities ◽  
Ash Disposal

Now-a-days energy planners are aiming to increase the use of renewable energy sources and nuclear to meet the electricity generation. But till now coal-based power plants are the major source of electricity generation. Disadvantages of coal-based thermal power plants is disposal problem of fly ash and pond ash. It was earlier considered as a total waste and environmental hazard thus its use was limited, but now its useful properties have been known as raw material for various application in construction field. Fly ash from the thermal plants is available in large quantities in fine and coarse form. Fine fly ash is used in construction industry in some amount and coarse fly ash is subsequently disposed over land in slurry forms. In India around 180 MT fly is produced and only around 45% of that is being utilized in different sectors. Balance fly ash is being disposed over land. It needs one acre of land for ash disposal to produce 1MW electricity from coal. Fly ash and pond ash utilization helps to reduce the consumption of natural resources. The fly ash became available in coal based thermal power station in the year 1930 in USA. For its gainful utilization, scientist started research activities and in the year 1937, R.E. Davis and his associates at university of California published research details on use of fly ash in cement concrete. This research had laid foundation for its specification, testing & usages. This study reports the potential use of pond-ash and fly-ash as cement in concrete mixes. In this present study of concrete produced using fly ash, pond ash and OPC 53 grade will be carried. An attempt will be made to investigate characteristics of OPC concrete with combined fly ash and pond ash mixed concrete for Compressive Strength test, Split Tensile Strength test, Flexural Strength test and Durability tests. This paper deals with the review of literature for fly-ash and pond-ash as partial replacement of cement in concrete.

scholarly journals Co-Combustion Studies of Low-Rank Coal and Refuse-Derived Fuel: Performance and Reaction Kinetics

Energies ◽  
2021 ◽  
Vol 14 (13) ◽  
pp. 3796
Author(s):  
Mudassar Azam ◽  
Asma Ashraf ◽  
Saman Setoodeh Setoodeh Jahromy ◽  
Sajjad Miran ◽  
Nadeem Raza ◽  
...  
Keyword(s):  
Activation Energy ◽  
Waste Management ◽  
Energy Demand ◽  
Power Plants ◽  
Combustion Process ◽  
Isoconversional Methods ◽  
Low Rank ◽  
Heating Rates ◽  
Average Activation Energy ◽  
Refuse Derived Fuel

In connection to present energy demand and waste management crisis in Pakistan, refuse-derived fuel (RDF) is gaining importance as a potential co-fuel for existing coal fired power plants. This research focuses on the co-combustion of low-quality local coal with RDF as a mean to reduce environmental issues in terms of waste management strategy. The combustion characteristics and kinetics of coal, RDF, and their blends were experimentally investigated in a micro-thermal gravimetric analyzer at four heating rates of 10, 20, 30, and 40 °C/min to ramp the temperature from 25 to 1000 °C. The mass percentages of RDF in the coal blends were 10%, 20%, 30%, and 40%, respectively. The results show that as the RDF in blends increases, the reactivity of the blends increases, resulting in lower ignition temperatures and a shift in peak and burnout temperatures to a lower temperature zone. This indicates that there was certain interaction during the combustion process of coal and RDF. The activation energies of the samples were calculated using kinetic analysis based on Kissinger–Akahira–Sunnose (KAS) and Flynn–Wall–Ozawa (FWO), isoconversional methods. Both of the methods have produced closer results with average activation energy between 95–121 kJ/mol. With a 30% refuse-derived fuel proportion, the average activation energy of blends hit a minimum value of 95 kJ/mol by KAS method and 103 kJ/mol by FWO method.

scholarly journals Research on Thermal Discharge Pollution of Xiangshan Power Plant Based on Remote Sensing

2012 ◽  
Vol 6-7 ◽  
pp. 128-134
Author(s):  
Yuan Lin ◽  
Zhong Yang Guo ◽  
Peng Peng Kan ◽  
Shu Feng Ye
Keyword(s):  
Remote Sensing ◽  
Energy Demand ◽  
Power Plants ◽  
Thermal Power ◽  
Thermal Infrared ◽  
Coastal Environment ◽  
Normal Operation ◽  
Thermal Discharge ◽  
Thermal Infrared Remote Sensing ◽  
Sensing Technology

Thermal power technology has brought great convenience for human electricity energy demand, but thermal discharge from thermal power plants has caused great harm to the coastal environment. Therefore, it’s important to strengthen the monitoring of thermal pollution from power plants for guarantee the normal operation of coastal environment and ecological system. Thermal infrared remote sensing technology provides a new measure for monitoring the thermal discharge. In this paper, we use mono-window algorithm and Landsat thermal infrared data to retrieved the sea surface temperature around Xiangshan Power Plants, and achieved the result of 1~5.4°C temperature rise in 106.52km2 in Xiangshan Harbor, revealed the spatial distribution regularities of thermal discharge and discussed the influence of thermal discharge on costal environment.

Greenhouse Gas Emissions Calculation Methodology in Thermal Power Plants: Case Study of Iran and Comparison With Canada

2008 ◽  
Author(s):  
Farshid Zabihian ◽  
Alan S. Fung
Keyword(s):  
Climate Change ◽  
Greenhouse Gas ◽  
Global Climate Change ◽  
Gas Turbines ◽  
Electricity Generation ◽  
Power Plants ◽  
Global Climate ◽  
Thermal Power ◽  
Ghg Emissions ◽  
Thermal Power Plants

Nowadays, the global climate change has been a worldwide concern and the greenhouse gases (GHG) emissions are considered as the primary cause of that. The United Nations Conference on Environment and Development (UNCED) divided countries into two groups: Annex I Parties and Non-Annex I Parties. Since Iran and all other countries in the Middle East are among Non-Annex I Parties, they are not required to submit annual GHG inventory report. However, the global climate change is a worldwide phenomenon so Middle Eastern countries should be involved and it is necessary to prepare such a report at least unofficially. In this paper the terminology and the methods to calculate GHG emissions will first be explained and then GHG emissions estimates for the Iranian power plants will be presented. Finally the results will be compared with GHG emissions from the Canadian electricity generation sector. The results for the Iranian power plants show that in 2005 greenhouse gas intensity for steam power plants, gas turbines and combined cycle power plants were 617, 773, and 462 g CO2eq/kWh, respectively with the overall intensity of 610 g CO2eq/kWh for all thermal power plants. This GHG intensity is directly depend on efficiency of power plants. Whereas, in 2004 GHG intensity for electricity generation sector in Canada for different fuels were as follows: Coal 1010, refined petroleum products 640, and natural gas 523 g CO2eq/kWh, which are comparable with same data for Iran. For average GHG intensity in the whole electricity generation sector the difference is much higher: Canada 222 vs. Iran 610g CO2eq/kWh. The reason is that in Canada a considerable portion of electricity is generated by hydro-electric and nuclear power plants in which they do not emit significant amount of GHG emissions. The average GHG intensity in electricity generation sector in Iran between 1995 and 2005 experienced 13% reduction. While in Canada at the same period of time there was 21% increase. However, the results demonstrate that still there are great potentials for GHG emissions reduction in Iran’s electricity generation sector.

Sign in / Sign up

Export Citation Format

Share Document