Numerical simulation of the coupled dynamic response of a submerged floating tunnel with mooring lines in regular waves

2015 ◽  
Vol 5 (2) ◽  
pp. 109-123 ◽  
Author(s):  
Cristian Cifuentes ◽  
Seungjun Kim ◽  
M.H. Kim ◽  
W.S. Park
Keyword(s):  
Numerical Simulation ◽  
Dynamic Response ◽  
Regular Waves ◽  
Mooring Lines ◽  
Submerged Floating Tunnel

Dynamic Response Comparison of Mono and Dual Submerged Floating Tunnels

2020 ◽  
Author(s):  
Woo Chul Chung ◽  
Chungkuk Jin ◽  
MooHyun Kim
Keyword(s):  
Dynamic Response ◽  
Dynamic Responses ◽  
Hydrodynamic Load ◽  
Extreme Wave ◽  
Lumped Mass ◽  
Mooring Lines ◽  
Drag Forces ◽  
Different Types ◽  
Submerged Floating Tunnel ◽  
Fully Coupled

Abstract Submerged floating tunnel (SFT) concept has been studied by many researchers as an alternative of conventional or floating bridges, especially in the fjord or as a connection between island and land. One of the major challenges is large dynamic responses under extreme wave and earthquake excitations. In this regard, two different types of SFT, which are mono and dual SFTs, are suggested in this study, and the global performance of them is compared through tunnel-mooring fully-coupled time-domain numerical simulations. The tunnel and mooring lines are modeled by the lumped-mass-based line model. The Morison equation is utilized for hydrodynamic load estimations of the tunnel and mooring lines at their instantaneous positions. To check dynamic response of SFT under operating condition, 10-yr waves with the current are considered as an environmental condition. Dynamic responses, mooring tensions, and inertial and drag forces are systematically compared.

scholarly journals Numerical Simulation of Dynamic Response of Submerged Floating Tunnel under Regular Wave Conditions

2022 ◽  
Vol 2022 ◽  
pp. 1-15
Author(s):  
Wenlong Luo ◽  
Bo Huang ◽  
Yao Tang ◽  
Hao Ding ◽  
Ke Li ◽  
...  
Keyword(s):  
Dynamic Response ◽  
Weight Ratio ◽  
Wave Period ◽  
Hydrodynamic Performance ◽  
Regular Wave ◽  
Wave Loading ◽  
Mooring Lines ◽  
Vibration Period ◽  
Submerged Floating Tunnel ◽  
Submergence Depth

A submerged floating tunnel (SFT) is considered an innovative alternative to conventional bridges and underground or immersed tunnels for passing through deep water. Assessment of hydrodynamic performance of SFT under regular wave loading is one of the important factors in the design of SFT structure. In this paper, a theoretical hydrodynamic model is developed to describe the coupled dynamic response of an SFT and mooring lines under regular waves. In this model, wave-induced hydrodynamic loads are estimated by the Morison equation for a moving object, and the simplified governing differential equation of the tunnel with mooring cables is solved using the fourth-order Runge–Kutta and Adams numerical method. The numerical results are successfully validated by direct comparison against published experimental data. On this basis, the effects of the parameters such as the cable length, buoyancy-weight ratio, wave period, wave steepness, and water/submergence depth on the dynamic response of the SFT under wave loading are studied. The results show that tunnel motions and cable tensions grow with wave height and period and decrease with submergence depth. The resonance of the tunnel will be triggered when the wave period is close to its natural vibration period, and the estimation formula of wave period corresponding to tunnel resonance is proposed in this paper.

Diffraction Waves About an Advancing Wedge Model in Deep Water

1990 ◽  
Vol 34 (02) ◽  
pp. 105-122
Author(s):  
Hideaki Miyata ◽  
Makoto Kanai ◽  
Noriaki Yoshiyasu ◽  
Yohichi Furuno
Keyword(s):  
Numerical Simulation ◽  
Finite Difference ◽  
Finite Difference Method ◽  
Wedge Angle ◽  
Wave Pattern ◽  
Regular Waves ◽  
Nonlinear Characteristics ◽  
Diffracted Waves ◽  
Nonlinear Features ◽  
Incident Waves

The diffraction of regular waves by advancing wedge models is studied both experimentally and numerically. The nonlinear features of diffracted waves are visualized by wave pattern pictures and the formation is analyzed by the grid-projection method. The experimental observation indicates that the diffracted waves have a number of nonlinear characteristics similar to shock waves due to the interaction of incident waves with the advancing obstacle in the flow-field caused by the advancing motion. Bow waves of both oblique type and normal detached type are observed at remarkably lower Froude numbers than in the case of a ship in steady advance motion. Their occurrence systematically depends on the Froude number and the wedge angle. The numerical simulation of this phenomenon by a finite-difference method shows approximate agreement with the experimental results.

Numerical simulation of regular waves: Optimization of a numerical wave tank

2018 ◽  
Vol 170 ◽  
pp. 89-99 ◽  
Author(s):  
Fábio M. Marques Machado ◽  
António M. Gameiro Lopes ◽  
Almerindo D. Ferreira
Keyword(s):  
Numerical Simulation ◽  
Numerical Wave Tank ◽  
Regular Waves ◽  
Wave Tank ◽  
Numerical Wave

scholarly journals Dynamic Response of Floating Wind Turbine Under Consideration of Dynamic Behavior of Catenary Mooring-Lines

2017 ◽  
Author(s):  
Shuangxi Guo ◽  
Yilun Li ◽  
Min Li ◽  
Weimin Chen ◽  
Yiqin Fu
Keyword(s):  
Dynamic Response ◽  
Wind Turbine ◽  
Nonlinear Dynamic ◽  
Ocean Waves ◽  
Wave Frequency ◽  
Mooring Line ◽  
Mooring Lines ◽  
Restoring Force ◽  
Dynamic Behaviors ◽  
Floating Wind Turbine

Recently, wind turbine has been developed from onshore area to offshore area because of more powerful available wind energy in ocean area and more distant and less harmful noise coming from turbine. As it is approaching toward deeper water depth, the dynamic response of the large floating wind turbine experiencing various environmental loads becomes more challenge. For examples, as the structural size gets larger, the dynamic interaction between the flexible bodies such as blades, tower and catenary mooring-lines become more profound, and the dynamic behaviors such as structural inertia and hydrodynamic force of the mooring-line get more obvious. In this paper, the dynamic response of a 5MW floating wind turbine undergoing different ocean waves is examined by our FEM approach in which the dynamic behaviors of the catenary mooring-line are involved and the integrated system including flexible multi-bodies such as blades, tower, spar platform and catenaries can be considered. Firstly, the nonlinear dynamic model of the integrated wind turbine is developed. Different from the traditional static restoring force, the dynamic restoring force is analyzed based on our 3d curved flexible beam approach where the structural curvature changes with its spatial position and the time in terms of vector equations. And, the modified finite element simulation is used to model a flexible and moving catenary of which the hydrodynamic load depending on the mooring-line’s motion is considered. Then, the nonlinear dynamic governing equations is numerically solved by using Newmark-Beta method. Based on our numerical simulations, the influences of the dynamic behaviors of the catenary mooring-line on its restoring performance are presented. The dynamic responses of the floating wind turbine, e.g. the displacement of the spar and top tower and the dynamic tension of the catenary, undergoing various ocean waves, are examined. The dynamic coupling between different spar motions, i.e. surge and pitch, are discussed too. Our numerical results show: the dynamic behaviors of mooring-line may significantly increase the top tension, particularly, the peak-trough tension gap of snap tension may be more than 9 times larger than the quasi-static result. When the wave frequency is much higher than the system, the dynamic effects of the mooring system will accelerate the decay of transient items of the dynamic response; when the wave frequency and the system frequency are close to each other, the displacement of the spar significantly reduces by around 26%. Under regular wave condition, the coupling between the surge and pitch motions are not obvious; but under extreme condition, pitch motion may get about 20% smaller than that without consideration of the coupling between the surge and pitch motions.

Impact Simulation of a Crashworthy Composite Fuselage Section with Energy-Absorbing Floor

2014 ◽  
Vol 529 ◽  
pp. 102-107
Author(s):  
Hai Bo Luo ◽  
Ying Yan ◽  
Xiang Ji Meng ◽  
Tao Tao Zhang ◽  
Zu Dian Liang
Keyword(s):  
Experimental Data ◽  
Numerical Simulation ◽  
Dynamic Response ◽  
Relative Error ◽  
High Strength ◽  
Computer Code ◽  
Impact Simulation ◽  
Average Acceleration ◽  
Simulation Results ◽  
Energy Absorbing

A 7.8m/s vertical drop simulate of a full composite fuselage section was conducted with energy-absorbing floor to evaluate the crashworthiness features of the fuselage section and to predict its dynamic response to dummies in future. The 1.52m diameter fuselage section consists of a high strength upper fuselage frame, one stiff structural floor and an energy-absorbing subfloor constructed of Rohacell foam blocks. The experimental data from literature [6] were analyzed and correlated with predictions from an impact simulation developed using the nonlinear explicit transient dynamic computer code MSC.Dytran. The simulated average acceleration did not exceed 13g, by contrast with experimental results, whose relative error is less than 11%. The numerical simulation results agree with experiments well.

Dynamic Test of Bird Strike on a Flat Plate Made from LY-12 Aluminium

2013 ◽  
Vol 765-767 ◽  
pp. 3158-3161
Author(s):  
Jun Liu ◽  
Zheng Li Zhang
Keyword(s):  
Numerical Simulation ◽  
Dynamic Response ◽  
Dynamic Test ◽  
Time History ◽  
Aircraft Design ◽  
Bird Strike ◽  
Test Results ◽  
Valuable Data ◽  
Good Agreement ◽  
Peak Value

Tests of bird strike have been carried out on plate made from LY-12 Aluminium. The test was down with the projectile impacting the target perpendicularly at velocity of 40m/s, 80m/s, 120m/s respectively. The displacement-time history curves and strain-time history curves of on LY-12 Aluminium plate were measured. The good agreement of the results between two specimens in one group indicated that the results tested in the presnet paper are reliable. The dynamic response of the plate and damage modes of the bird influenced by striking velocity were analyzed. The peak value of the displacement linear enlarged with the increasing of the striking velocity. The test results in the present paper provided valuable data for aircraft design impacted by bird, and also provided abundant test datas for the numerical simulation model applied in bird striking.

Dynamic Response of a Spar-Type Floating Wind Turbine at Power Generation

2014 ◽  
Author(s):  
Tomoaki Utsunomiya ◽  
Shigeo Yoshida ◽  
Soichiro Kiyoki ◽  
Iku Sato ◽  
Shigesuke Ishida
Keyword(s):  
Numerical Simulation ◽  
Power Generation ◽  
Dynamic Response ◽  
Wind Turbine ◽  
Prestressed Concrete ◽  
Offshore Wind ◽  
Offshore Wind Turbine ◽  
Floating Foundation ◽  
Mooring Dynamics ◽  
Nagasaki Prefecture

In this paper, dynamic response of a Floating Offshore Wind Turbine (FOWT) with spar-type floating foundation at power generation is presented. The FOWT mounts a 100kW wind turbine of down-wind type, with the rotor’s diameter of 22m and a hub-height of 23.3m. The floating foundation consists of PC-steel hybrid spar. The upper part is made of steel whereas the lower part made of prestressed concrete segments. The FOWT was installed at the site about 1km offshore from Kabashima Island, Goto city, Nagasaki prefecture on June 11th, 2012. Since then, the field measurement had been made until its removal in June 2013. In this paper, the dynamic behavior during the power generation is presented, where the comparison with the numerical simulation by aero-hydro-servo-mooring dynamics coupled program is made.

Sign in / Sign up

Export Citation Format

Share Document