Synthesis of Insulin Loaded Nanoparticles and Their Antidiabetic Studies

2021 ◽  
Vol 37 (6) ◽  
pp. 1458-1461
Author(s):  
A.Asha A.Asha ◽  
G.S. Prabha Littis Malar

The goal of this present work turned into synthesis of polymeric nanoparticles from natural polymeric material. Natural polymeric nanoparticles have some unique physicochemical properties like stability, biocompatibility, biodegradability, and manage the drug release, so it’s used for drug transport. On this look natural polymeric material Casein and Chitosan are used for the synthesis of nanoparticles. Insulin drug was introduced to these polymeric nanoparticles, which are used for the drug delivery. These drug loaded polymeric nanoparticles are synthesised by nano precipitation technique. The particles size of drug loaded polymeric nanoparticles based totally the rate of stirring and time of nanoparticles synthesised. Insulin was used as a drug and Glutaraldehyde was used as a linking agent. This insulin drug becomes adsorbed on the surface of the nanoparticles. Those drug loaded nanoparticles are characterized by FT-IR spectrum and physical status is analysis by means of XRD pattern. The morphology of the drug loaded nanoparticles is studied by using Scanning Electron Microscopy (SEM). From those characterisation studies insulin drug was efficaciously loaded with the nanoparticles. It has high inhibitory property towards kind II diabetics.

2018 ◽  
Vol 3 (1) ◽  
pp. 12 ◽  
Author(s):  
Zaimahwati Zaimahwati ◽  
Yuniati Yuniati ◽  
Ramzi Jalal ◽  
Syahman Zhafiri ◽  
Yuli Yetri

<p>Pada penelitian ini telah dilakukan isolasi dan karakterisasi bentonit alam menjadi nanopartikel montmorillonit. Bentonit alam yang digunakan diambil dari desa Blangdalam, Kecamatan Nisam Kabupaten Aceh Utara.  Proses isolasi meliputi proses pelarutan dengan aquades, ultrasonic dan proses sedimentasi. Untuk mengetahui karakterisasi montmorillonit dilakukan uji FT-IR, X-RD dan uji morfologi permukaan dengan Scanning Electron Microscopy (SEM). Partikel size analyzer untuk menganalisis dan menentukan ukuran nanopartikel dari isolasi bentonit alam. Dari hasil penelitian didapat ukuran nanopartikel montmorillonit hasil isolasi dari bentonit alam diperoleh berdiameter rata-rata 82,15 nm.</p><p><em>In this research we have isolated and characterized natural bentonite into montmorillonite nanoparticles. Natural bentonite used was taken from Blangdalam village, Nisam sub-district, North Aceh district. The isolation process includes dissolving process with aquades, ultrasonic and sedimentation processes.  The characterization of montmorillonite, FT-IR, X-RD and surface morphology test by Scanning Electron Microscopy (SEM). Particle size analyzer to analyze and determine the size of nanoparticles from natural bentonite insulation. From the research results obtained the size of montmorillonite nanoparticles isolated from natural bentonite obtained an average diameter of 82.15 nm.</em></p>


2012 ◽  
Vol 174-177 ◽  
pp. 508-511
Author(s):  
Lin Lin Yang ◽  
Yong Gang Wang ◽  
Yu Jiang Wang ◽  
Xiao Feng Wang

BiFeO3 polyhedrons had been successfully synthesized via a hydrothermal method. The as-prepared products were characterized by power X-ray diffraction (XRD) pattern, scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The possible mechanisms for the formation of BiFeO3 polyhedrons were discussed. Though comparison experiments, it was found that the kind of precursor played a key role on the morphology control of BiFeO3 crystals.


2021 ◽  
Author(s):  
Fatma Unal

Abstract Terbium oxide (Tb2O3) particles (NPs) were synthesized by precipitation method using ammonium carbonate as precipitation agent. Effects of precursor molarity (0.1, 0.15 and 0.2 M) on photoluminescence (PL) behaviour of the NPs were investigated. The presence of the Tb2O3 phase was confirmed by X-Ray Diffraction (XRD) and Fourier-transform infrared spectroscopy (FT-IR) analyses. Morphological investigations of the produced powders were made by Field Emission Gun-Scanning Electron Microscopy (FEG-SEM). It showed that the morphology of Tb2O3 particles transformed from the nanograin chain to bundles morphology of rod-like as the amount of precursor molarity increased. Emission spectrum were investigated by Photoluminescence (PL) Spectroscopy. All the Tb2O3 particles exhibited the strongest peak at 493 nm ascribed to 5D4-7F6 (magnetic dipole (MD), C2) transition. The increase in the number of C2 sites released from the MD transition with the increase of the precursor molarity caused a negative increase in the b* (yellowness/blueness of the emission) value in the CIE diagram, indicating that the colour shifted to the blue region. The Tb2O3 particles produced by the precipitation method exhibited novel strong cyan colour and the PL emission intensity increased with increasing molarity.


2016 ◽  
Author(s):  
Ανδρέας Μαυρογένης

Στην προύσα εργασία χρησιμοποιήθηκε η υπέρυθρη φασματοσκοπία με μετασχηματισμό Fourier σε συνδυασμό με οπτικό μικροσκόπιο υψηλή ανάλυσης και μικροσκόπιο διασποράς SEM (scanning electron microscopy) για την in vitro μελέτη της επίδρασης των ιοντιζουσών ακτινοβολιών στον αρθρικό χόνδρο, τη διεπιφάνεια με το οστούν, και για την προσέγγιση του χημικού μηχανισμού που προκαλείται κατά την ακτινοθεραπεία.Από τις μεταβολές των εντάσεων και τις νέες ταινίες στην περιοχή μεταξύ 4000-2800 cm-1, διαπιστώθηκε ότι οι βλάβες οι οποίες προκαλούνται σε μικρές δόσεις ακτινοβολίας μέχρι 6 Gy είναι οι σχάσεις των δεσμών υδρογόνου των γλυκοζαμινογλυκανών (πολυγλυκάνες, υαλουρονικό οξύ) και των κολλαγονούχων πρωτεϊνών.Τα θραύσματα του κολλαγόνου και υαλουρονικού οξέος αντιδρούν μεταξύ τους με διασταυρούμενο πολυμερισμό σχηματίζοντας προϊόντα στα οποία αποδίδεται η μείωση του ιξώδους των χόνδρων και επομένως η αύξηση της τριβής και τέλος η φθορά των χόνδρων. Τα αποτελέσματα αυτά επιβεβαιώθηκαν με σύγκριση ανάλογων χόνδρων οι οποίοι αφαιρέθηκαν από ασθενείς λόγω οστεοαρθρίτιδας ή άλλης αιτίας βλάβης του αρθρικού χόνδρου και καρκίνου.Οι μεταβολές στην περιοχή του φάσματος μεταξύ 1800-1400 cm-1, όπου εμφανίζονται οι χαρακτηριστικές δονήσεις των κολλαγονούχων πρωτεϊνών έδειξαν την καταστροφή της έλικας από α-έλικα, η οποία επικρατεί στην φυσιολογική κατάσταση, σε τυχαία περιέλιξη μετά την επίδραση των ιοντιζουσών ακτινοβολιών. Με αύξηση της δόσης ακτινοβολίας παράγονται αμυλοειδούς τύπου πρωτεΐνες από τα θραύσματα των πρωτεϊνών που παράγονται, λόγω της επίδρασης των ελευθέρων ριζών υδροξυλίου.Η εμφάνιση της ταινίας στα 1742 cm-1 αποδίδεται στην υπεροξείδωση των μεμβρανών των κυττάρων η οποία προκαλείται από την παρουσία του οξυγόνου, το οποίο, ως ελεύθερη δίριζα συμβάλλει στην περαιτέρω καταστροφή των ιοντιζουσών ακτινοβολιών. Η ταινία χαρακτηρίζει τον σχηματισμό μαλονδιαλδεΰδης, μία ένωση που αποτελεί δείκτη για την εξέλιξη της ασθένειας.Από τις ταινίες στην περιοχή του φάσματος μεταξύ 1400-900 cm-1 όπου εμφανίζονται οι χαρακτηριστικές δονήσεις των ομάδων –C-O-C- των σακχάρων διαπιστώνεται η αύξηση των D-σακχάρων, τα οποία προκύπτουν από την αύξηση των μονομερών. Οι εντάσεις των ταινιών αυτών εξαρτώνται από τη δόση ακτινοβολίας και αυξάνει αναλογικά μέχρι δόσεις περίπου 9 Gy. Πέραν αυτής της δόσης, οι παραγόμενες ελεύθερες ρίζες αντιδρούν περαιτέρω με βασικά βιομόρια και μεταβάλλουν την τοξική επίδραση της ακτινοβολίας.Στην περιοχή μεταξύ 1300-900 cm-1, οι ταινίες του φάσματος των σακχάρων συνυπάρχουν με τις ταινίες των φωσφορικών αλάτων του υδροξυαπατίτη των οστών. Από την μορφή των ταινιών και τις θέσεις των μεγίστων απορρόφησης φαίνεται ο σχηματισμός άμορφου φωσφορικού ασβεστίου [Ca3(ΡΟ4)2] ο οποίος προέρχεται από την αντίδραση των ιόντων ασβεστίου (Ca2+) του υγρού των χόνδρων με τις φωσφορικές ομάδες των φωσφολιπιδίων των κυτταρικών μεμβρανών.Τα FT-IR φάσματα συγκρίθηκαν με φάσματα ασθενών με οστεοαρθρίτιδα και διαπιστώθηκε ότι τα φάσματα παρουσιάζουν ομοιότητες, οι οποίες ερμηνεύονται με μηχανισμούς ελευθέρων ριζών.Η μελέτη της αρχιτεκτονικής των χόνδρων με οπτικό μικροσκόπιο και ηλεκτρονικό μικροσκόπιο σάρωσης (SEM) έδειξαν ότι η φθορά την οποία προκαλούν οι ιοντίζουσες ακτινοβολίες είναι ίδια με αυτή που προκαλεί η φυσιολογική γήρανση του ατόμου και εκδήλωση οστεοαρθρίτιδας.Τα δεδομένα της μελέτης δείχνουν ότι οι ιοντίζουσες ακτινοβολίες κατά την ακτινοθεραπεία προκαλούν σχάση των αλυσίδων των γλυκοζαμικογλυκανών και κολλαγονούχων πρωτεϊνών, οι οποίες οδηγούν σε μη αντιστρεπτές βλάβες. Οι παρατηρήσεις αυτές δείχνουν ότι θα πρέπει να αναπτυχθεί νέα σειρά θεραπευτικού σχήματος για την αντιμετώπιση των βλαβών, οι οποίες προκαλούνται στα υγιή κύτταρα τα οποία ακτινοβολούνται παράλληλα με τα παθολογικά.


Author(s):  
Aniek Setiya Budiatin ◽  
Samirah ◽  
Maria Apriliani Gani ◽  
Wenny Putri Nilamsari ◽  
Chrismawan Ardianto ◽  
...  

Bovine bone is a considerable source for the production of hydroxyapatite. The recent study reported a novel method to extract hydroxyapatite from bovine bone without producing hazardous residue. The bovine bones were cut and boiled in the opened chamber followed by boiling in pressurized tank. The bones were then soaked into 95% ethanol. Calcination was then conducted in 800°C, 900°C and 1,000°C, for 2 hours. The result was then grinded and sieved. The powder then was characterized using Fourier transform infrared (FT-IR), Scanning electron microscopy (SEM) and X-ray diffraction analysis (XRD) to measure the purity of hydroxyapatite. It is concluded that the hydroxyapatite derived from this process showed 100% purity, resulting 35.34 ± 0.39% w/w from the wet bone weight and 72.3% w/w from the dried weight. The present extraction method has been proven to yield high amount of pure hydroxyapatite as well as reducing the use of hazardous reagent.


RSC Advances ◽  
2020 ◽  
Vol 10 (6) ◽  
pp. 3060-3071
Author(s):  
Angela F. Danil de Namor ◽  
Salman Alharthi ◽  
Brendan Howlin ◽  
Nawal Al Hakawati

A recyclable mercury(ii) selective dimer based on a calix[4]pyrrole derivative has been synthesised and characterised by mass and FT-IR spectrometry, Scanning Electron Microscopy (SEM) and Energy Dispersive X-ray (EDX).


2008 ◽  
Vol 66 (2) ◽  
pp. 260-265 ◽  
Author(s):  
Jamil R. Memon ◽  
Saima Q. Memon ◽  
M.I. Bhanger ◽  
G. Zuhra Memon ◽  
A. El-Turki ◽  
...  

2011 ◽  
Vol 335-336 ◽  
pp. 187-190
Author(s):  
Jian Jun Chen ◽  
Ji Ying Men

Abstract: Conductive polypyrrole(PPy)-polylactic Acid(PLA) composite membranes are prepared with chemical method. Membranes have been characterized by Fouier transform infrared spectroscopic(FT-IR) and scanning electron microscopy (SEM).The conductive stability of membranes has been measured by home-made multiwell direct current electrical stimulating system. The results show PPy nanparticals network embeds in PLA matrix and the conductive stability of membranes sustains in the range of 28μA~35μA between the observation time of 560h to 1146h.


2013 ◽  
Vol 774-776 ◽  
pp. 629-633
Author(s):  
Ji Feng Jiang ◽  
Kang Kang Guo ◽  
Ya Ping Zhu ◽  
Fan Wang ◽  
Hui Min Qi

Triethynylborazine-polyhydromethylsiloxane copolymers (TEB-PHMSs) were prepared through hydrosilylation reaction between -C≡CH attached to boron and ≡Si-H. The structures of TEB-PHMSs were characterized by Fourier transform Infrared (FT-IR) and Nuclear Magnetic Resonance (NMR) spectroscopy. Their cure behavior were examined by Differential Scanning Calorimeter (DSC) and FT-IR, and then thermostability and ceramization of cured TEB-PHMS were investigated by Thermogravimetric analysis (TGA), pyrolysis-GC-MS, X-ray diffraction (XRD) and Scanning Electron Microscopy (SEM). The results indicated that TEB-PHMSs could be cured and converted into an outstanding thermostable SiBCN ceramics.


2012 ◽  
Vol 535-537 ◽  
pp. 392-397
Author(s):  
Guang Jian Xing ◽  
Xiao Xiao Xiong ◽  
Dong Mei Peng ◽  
Yi Wang ◽  
Guang Ming Wu

PbWO4 nano- and macrostructures have been successfully synthesized via solvothermal method and a facile microwave irradiation method. The products were characterized by X-ray diffraction (XRD) pattern and field emission scanning electron microscopy (FESEM). By controlling experimental parameters including the CTAB concentration and the kind of solvent, different morphologies of PbWO4 nano- and macrostructures can be obtained.


Sign in / Sign up

Export Citation Format

Share Document