Morphology Modulated Preparation of PbWO4 Nano- and Macrostructures

2012 ◽  
Vol 535-537 ◽  
pp. 392-397
Author(s):  
Guang Jian Xing ◽  
Xiao Xiao Xiong ◽  
Dong Mei Peng ◽  
Yi Wang ◽  
Guang Ming Wu
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Solvothermal Method ◽  
X Ray Diffraction ◽  
Microwave Irradiation Method ◽  
Xrd Pattern ◽  
X Ray ◽  
Ctab Concentration ◽  
Experimental Parameters ◽  
Scanning Electron

PbWO4 nano- and macrostructures have been successfully synthesized via solvothermal method and a facile microwave irradiation method. The products were characterized by X-ray diffraction (XRD) pattern and field emission scanning electron microscopy (FESEM). By controlling experimental parameters including the CTAB concentration and the kind of solvent, different morphologies of PbWO4 nano- and macrostructures can be obtained.

Hydrothermal Synthesis and Characterization of BiFeO3 Polyhedral Crystallites

2012 ◽  
Vol 174-177 ◽  
pp. 508-511
Author(s):  
Lin Lin Yang ◽  
Yong Gang Wang ◽  
Yu Jiang Wang ◽  
Xiao Feng Wang
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Synthesis And Characterization ◽  
X Ray Diffraction ◽  
Xrd Pattern ◽  
X Ray ◽  
Transmission Electron ◽  
Scanning Electron

BiFeO3 polyhedrons had been successfully synthesized via a hydrothermal method. The as-prepared products were characterized by power X-ray diffraction (XRD) pattern, scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The possible mechanisms for the formation of BiFeO3 polyhedrons were discussed. Though comparison experiments, it was found that the kind of precursor played a key role on the morphology control of BiFeO3 crystals.

Copper-based MOF, Cu3(SDBA)2(HSDBA), as catalyst for efficient reduction of 4-nitrophenol in the presence of sodium borohydride

2022 ◽  
Author(s):  
Manel Mansour ◽  
Hamza Kahri ◽  
Mouhieddinne Guergueb ◽  
Houcine Barhoumi ◽  
Enrique Gutierrez-Puebla ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Physicochemical Properties ◽  
Sodium Borohydride ◽  
Solvothermal Method ◽  
X Ray Diffraction ◽  
X Ray ◽  
Prepared Sample ◽  
Efficient Reduction ◽  
Scanning Electron

Herein, we report the synthesis of the copper-based MOF, Cu3(SDBA)2(HSDBA), using solvothermal method. The physicochemical properties of the as-prepared sample were examined by X-ray diffraction, scanning electron microscopy, energy-dispersive X-ray...

Prepared of Flower-Like CuO via CTAB-Assisted Hydrothermal Method

2010 ◽  
Vol 152-153 ◽  
pp. 909-914 ◽  
Author(s):  
Yun Ling Zou ◽  
Yan Li ◽  
Nan Zhang ◽  
Jian Gang Li
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Hydrothermal Method ◽  
Cetyltrimethylammonium Bromide ◽  
Raw Material ◽  
Monoclinic Structure ◽  
X Ray Diffraction ◽  
Xrd Pattern ◽  
X Ray ◽  
Scanning Electron

Flower-like CuO nanostructures have been prepared via cetyltrimethylammonium bromide (CTAB)-assisted hydrothermal method. Here, CuCl2•2H2O was used as copper raw material, and sodium hydroxide was used as precipitate. The resulting CuO powders were characterized by X-ray diffraction (XRD) and field emission scanning electron microscopy (FESEM). X-ray diffraction (XRD) pattern exhibited the nanocrystalline nature with monoclinic structure for the as-synthesized nanostructures. FESEM images indicated that the flower-like CuO nanostructures are composed of many interconnected nanosheets in size of several micrometers in length and width and 60-80 nm in thickness. The possible formation mechanism of flower-like CuO nanostructures was discussed.

Hydroxyapatite Coating on Ti-6Al-4V Alloy by an Electrolytic Process and with Heat-Treatment

2009 ◽  
Vol 631-632 ◽  
pp. 407-412
Author(s):  
Cheng Li Wang ◽  
Wei Jen Shih ◽  
Szu Hao Wang ◽  
Kuo Ming Chang ◽  
Wang Long Li ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Heat Treatment ◽  
Scanning Electron Microscopy ◽  
Calcium Phosphate ◽  
X Ray Diffraction ◽  
Xrd Pattern ◽  
Major Phase ◽  
X Ray ◽  
Electrolytic Process ◽  
Scanning Electron

The effect of the heat-treatment on the calcium phosphate deposited on Ti-6Al-4V substrate by an electrolytic process has been investigated. The calcium phosphate were deposited in a 0.04M Ca(H2PO4)2･H2O (MCPM) solution on Ti-6Al-4V substrate at 60 °C, 10V and 80 Torr for 1h, and calcined at different temperature for 4h. X-ray diffraction (XRD) and scanning electron microscopy (SEM) were used to characterized the deposited samples. The XRD pattern of as-deposited sample contain the phase of dicalcium phosphate (DCPD) and HAP. When calcined at 400 °C for 4 h, the DCPD phase is vanished and HAP becomes the major phase. The XRD pattern reveals that the intensity of HAP and Ca2P2O7 (CPP) decreases, but the β-TCP, CaO and rutile TiO2 also shows up.

Preparation of Strontium Titanate Nanocubes Using Titanium Alkoxide and their Accumulations by Capillary Force

2011 ◽  
Vol 485 ◽  
pp. 309-312 ◽  
Author(s):  
Shogo Iwatsuki ◽  
Masatoshi Kera ◽  
Kouichi Nakashima ◽  
Ichiro Fujii ◽  
Takahiro Takei ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Strontium Titanate ◽  
Solvothermal Method ◽  
Titanium Isopropoxide ◽  
Titanium Alkoxide ◽  
X Ray Diffraction ◽  
Dense Structure ◽  
X Ray ◽  
Scanning Electron

Nanocubes accumulations were built up by meniscus method and developed to achieve a dense structure. For the first attempt, strontium titanate (SrTiO3, ST) nanocubes were selected for the nanocubes accumulations. The ST nanocubes were prepared by a solvothermal method. For Strontium titanate nanocubes, Sr(OH)2 and titanium isopropoxide (TP) were used as starting materials and were heated at 240°C for 18h in an autoclave. Size distribution of TP-derived ST nanocubes was narrower than TiO2-derived ST nanocubes. Moreover ST nanocubes accumulations were prepared by a meniscus method. A dense ST nanocubes accumulation of over 1 μm was prepared at an angle of 50 degrees at 60 °C. The crystal structures were determined by X-ray diffraction (XRD) and the microstructures were observed by scanning electron microscopy (SEM).

Identification of calcium oxalate crystals in dried or fixed tobacco leaf

1984 ◽  
Vol 42 ◽  
pp. 288-289
Author(s):  
Vicki L. Baliga ◽  
Mary Ellen Counts
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Calcium Oxalate ◽  
Growth And Development ◽  
Polarized Light ◽  
Calcium Oxalate Crystals ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Scanning Electron

Calcium is an important element in the growth and development of plants and one form of calcium is calcium oxalate. Calcium oxalate has been found in leaf seed, stem material plant tissue culture, fungi and lichen using one or more of the following methods—polarized light microscopy (PLM), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and x-ray diffraction.Two methods are presented here for qualitatively estimating calcium oxalate in dried or fixed tobacco (Nicotiana) leaf from different stalk positions using PLM. SEM, coupled with energy dispersive x-ray spectrometry (EDS), and powder x-ray diffraction were used to verify that the crystals observed in the dried leaf with PLM were calcium oxalate.

Environmental scanning electron microscopy of fresh human gallstones reveals new morphologies of precipitated calcium salts

1992 ◽  
Vol 50 (2) ◽  
pp. 1322-1323
Author(s):  
Howard S. Kaufman ◽  
Keith D. Lillemoe ◽  
John T. Mastovich ◽  
Henry A. Pitt
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Environmental Scanning Electron Microscopy ◽  
Environmental Scanning ◽  
X Ray Diffraction ◽  
Calcium Salts ◽  
Cholesterol Gallstones ◽  
X Ray ◽  
Ca Carbonate ◽  
Scanning Electron

Gallstones contain precipitated cholesterol, calcium salts, and proteins. Calcium (Ca) bilirubinate, palmitate, phosphate, and carbonate occurring in gallstones have variable morphologies but characteristic windowless energy dispersive x-ray (EDX) spectra. Previous studies of gallstone microstructure and composition using scanning electron microscopy (SEM) with EDX have been limited to dehydrated samples. In this state, Ca bilirubinates appear as either glassy masses, which predominate in black pigment stones, or as clusters, which are found mostly in cholesterol gallstones. The three polymorphs of Ca carbonate, calcite, vaterite, and aragonite, have been identified in gallstones by x-ray diffraction, however; the morphologies of these crystals vary in the literature. The purpose of this experiment was to study fresh gallstones by environmental SEM (ESEM) to determine if dehydration affects gallstone Ca salt morphology.Gallstones and bile were obtained fresh at cholecystectomy from 6 patients. To prevent dehydration, stones were stored in bile at 37°C. All samples were studied within 4 days of procurement.

PENINGKATAN LAJU DISOLUSI ACYCLOVIR DENGAN METODE SISTEM DISPERSI PADAT MENGGUNAKAN POLOXAMER 188

2016 ◽  
Vol 5 (1) ◽  
pp. 6
Author(s):  
Budi Setiawan ◽  
Erizal Zaini ◽  
Salman Umar
Keyword(s):  
Electron Microscopy ◽  
Thermal Analysis ◽  
Scanning Electron Microscopy ◽  
Fourier Transform ◽  
Differential Thermal Analysis ◽  
Fourier Transform Infrared ◽  
X Ray Diffraction ◽  
Poloxamer 188 ◽  
X Ray ◽  
Scanning Electron

Sebuah penelitian tentang sistem dispersi padat dari asiklovir dengan poloxamer 188 telah dilakukan formulasi dengan pencampuran secara fisika dengan rasio 1 : 1, 1 : 3, 1 : 5 dan dispersi padat 1 : 1, 1 : 3, 1 : 5 dan penggilingan 1:1 sebagai pembanding. Dispersi padat dibuat menggunakan metode pencairan (fusi), yang digabung dengan poloxamer 188 pada hotplate kemudian asiklovir dimasukkan ke dalam hasil poloxamer 188 lalu di kocok hingga membentuk masa homogen. Semua formula yang terbentuk termasuk asiklovir poloxamer 188 murni dianalisis karakterisasinya dengan Differential Thermal Analysis (DTA), X-ray Diffraction, Scanning Electron Microscopy (SEM), dan Fourier Transform Infrared (FTIR), kemudian pengambilan dilakukan  (penentuan kadar) mengunakan spektrofotometer UV pada panjang gelombang 257,08 nm dan uji laju disolusi dengan aquadest bebas CO2 menggunakan metode dayung. Hasil pengambilan  (penentuan kadar) menunjukkan bahwa semua formula memenuhi persyaratan farmakope Amerika edisi 30 dan farmakope Indonesia edisi 4 yaitu 95-110%. Sedangkan hasil uji laju disolusi untuk campuran fisik 1: 1, dan dispersi padat 1: 1, dan penggilingan 1: 1 menunjukkan peningkatan yang nyata dibandingkan asiklovir murni. Hal ini juga dapat dilihat dari hasil perhitungan statistik  menggunakan analisis varian satu arah  SPSS 17.

Structural Characterization of Gallbladder Stones Using Energy Dispersive X-ray Spectroscopy and X-ray Diffraction

2018 ◽  
Vol 21 (7) ◽  
pp. 495-500 ◽  
Author(s):  
Hassan A. Almarshad ◽  
Sayed M. Badawy ◽  
Abdalkarem F. Alsharari
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Energy Dispersive ◽  
Spectroscopic Techniques ◽  
X Ray Diffraction ◽  
Major Health Problem ◽  
X Ray ◽  
Gallbladder Stones ◽  
Pure Cholesterol ◽  
Scanning Electron

Aim and Objective: Formation of the gallbladder stones is a common disease and a major health problem. The present study aimed to identify the structures of the most common types of gallbladder stones using X-ray spectroscopic techniques, which provide information about the process of stone formation. Material and Method: Phase and elemental compositions of pure cholesterol and mixed gallstones removed from gallbladders of patients were studied using energy-dispersive X-ray spectroscopy combined with scanning electron microscopy analysis and X-ray diffraction. Results: The crystal structures of gallstones which coincide with standard patterns were confirmed by X-ray diffraction. Plate-like cholesterol crystals with laminar shaped and thin layered structures were clearly observed for gallstone of pure cholesterol by scanning electron microscopy; it also revealed different morphologies from mixed cholesterol stones. Elemental analysis of pure cholesterol and mixed gallstones using energy-dispersive X-ray spectroscopy confirmed the different formation processes of the different types of gallstones. Conclusion: The method of fast and reliable X-ray spectroscopic techniques has numerous advantages over the traditional chemical analysis and other analytical techniques. The results also revealed that the X-ray spectroscopy technique is a promising technique that can aid in understanding the pathogenesis of gallstone disease.

scholarly journals Analytical study of Buddha sculptures in Jingyin temple of Taiyuan, China

2021 ◽  
Vol 9 (1) ◽  
Author(s):  
Xiaojian Bai ◽  
Chen Jia ◽  
Zhigen Chen ◽  
Yuxuan Gong ◽  
Huwei Cheng ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Analytical Study ◽  
Energy Dispersive Spectrometry ◽  
Analytical Techniques ◽  
X Ray Diffraction ◽  
Ancient China ◽  
X Ray ◽  
Unique Style ◽  
Scanning Electron

AbstractWith exquisite design and unique style, the painted sculptures of Tutang Buddha and two attendants Buddha in Jingyin Temple are precious cultural heritages of China. The sculpture of Tutang Buddha, which was carved from a mound and painted by ancient craftsmen, was rarely found in ancient China. However, due to natural and human factors, the sculptures were severely damaged. Obviously, they require urgent and appropriate protection and restoration. In this study, samples taken from the sculptures were analysed through multiple analytical techniques, including scanning electron microscopy with energy dispersive spectrometry (SEM–EDS), Raman spectroscopy, X-ray diffraction (XRD), optical microscopy (OM) and granulometry. The analysis results enable us to infer the techniques used by the craftsmen in making the sculptures and provide a reliable evidence for the conservation and future protection of these and similar sculptures.

Sign in / Sign up

Export Citation Format

Share Document