scholarly journals Effect of different fertilizer types on Arsenic removal capacity of two fern species

2014 ◽  
Vol 6 (1) ◽  
pp. 42-46
Author(s):  
Thi Kim Anh Bui
Keyword(s):  
Environmental Factors ◽  
Plant Growth ◽  
Arsenic Removal ◽  
Organic Fertilizer ◽  
Arsenic Concentration ◽  
Pteris Vittata ◽  
Removal Capacity ◽  
Fern Species ◽  
Pityrogramma Calomelanos ◽  
Hyperaccumulator Plant

More and more attention has been paid to the research on phytoremediation and hyperaccumulators. Arsenic (As) uptake by hyperaccumulator plant species depends on many different environmental factors. Fertilizer is one of the most important factors because the plant growth needs nutrients. In this study, the pot experiments were conducted in 12 weeks to understand the effect of different fertilizer on As removal capacity of Pityrogramma calomelanos and Pteris vittata. The results showed that, Arsenic concentration in the frond is higher than that in the root of the fern. As removal efficiency of the ferns from the soil amended with both inorganic and organic fertilizer is highest. The ferns removed As content in soil up to 7.4 and 12.6 mg As per kg DW soil, respectively. For the control experiments without adding fertilizers, As removal ability of the ferns from the soil is lowest that was only 2.1 mg As per kg DW soil. Trên thế giới đã và đang có nhiều nghiên cứu, ứng dụng phương pháp sử dụng thực vật để xử lý ô nhiễm, đặc biệt là các loài thực vật siêu tích tụ kim loại nặng. Sự tích lũy Asen (As) trong các loài thực vật siêu tích lũy phụ thuộc vào rất nhiều yếu tố môi trường và dinh dưỡng khác nhau. Phân bón là một trong những yếu tố quan trọng nhất vì sự phát triển cây rất cần chất dinh dưỡng. Trong nghiên cứu này, các thí nghiệm được tiến hành trong 12 tuần để đánh giá về ảnh hưởng của các loại phân bón khác nhau đến khả năng xử lý ô nhiễm As trong đất của dương xỉ. Kết quả thu được cho thấy, nồng độ As tích lũy trong phần thân của dương xỉ cao hơn rất nhiều so với phần rễ của cây. Hiệu quả loại bỏ As ra khỏi đất của dương xỉ trong các thí nghiệm bổ sung cả phân bón vô cơ và phân bón hữu cơ là cao nhất. Pityrogramma calomelanos và Pteris vittata có thể loại bỏ hàm lượng As trong 1 kg trọng lượng khô đất tương ứng lên đến 7,4 và 12,6 mg. Các công thức thí nghiệm đối chứng không bổ sung phân bón thì cho hiệu quả loại bỏ As ra khỏi đất là thấp nhất chỉ 2,1 mg As trên 1 kg trọng lượng khô đất.

scholarly journals Arsenic phytoextraction and hyperaccumulation by fern species

2006 ◽  
Vol 63 (1) ◽  
pp. 90-101 ◽  
Author(s):  
Maria Isidoria Silva Gonzaga ◽  
Jorge Antonio Gonzaga Santos ◽  
Lena Qiying Ma
Keyword(s):  
Contaminated Soils ◽  
Arsenic Concentration ◽  
Cost Effective ◽  
Pteris Vittata ◽  
Major Step ◽  
Environmental Media ◽  
Screening Experiments ◽  
Adaptive Mechanisms ◽  
Fern Species ◽  
Pityrogramma Calomelanos

Arsenic (As) is an ubiquitous trace metalloid found in all environmental media. Its presence at elevated concentrations in soils derives from both anthropogenic and natural inputs. Arsenic is a toxic and carcinogenic element, which has caused severe environmental and health problem worldwide. Technologies currently available for the remediation of arsenic-contaminated sites are expensive, environmentally disruptive, and potentially hazardous to workers. Phytoextraction, a strategy of phytoremediation, uses plants to clean up contaminated soils and has been successfully applied to arsenic contaminated soils. It has the advantage of being cost-effective and environmentally friendly. A major step towards the development of phytoextraction of arsenic-impacted soils is the discovery of the arsenic hyper accumulation in ferns, first in Pteris vittata, which presented an extraordinary capacity to accumulate 2.3% arsenic in its biomass. Another fern, Pityrogramma calomelanos was found to exhibit the same hyperaccumulating characteristics. After that, screening experiments have revealed that the Pteris genus is really unique in that many species have the potential to be used in phytoextraction of arsenic. In general, these plants seem to have both constitutive and adaptive mechanisms for accumulating or tolerating high arsenic concentration. In the past few years, much work has been done to understand and improve the hyperaccumulating capability of these amazing plants. In particular, the field of molecular biology seems to hold the key for the future of the phytoremediation.

Arsenic hyperaccumulation by Pteris vittata and Pityrogramma calomelanos: a comparative study of uptake efficiency in arsenic-treated soils and waters

2010 ◽  
Vol 61 (12) ◽  
pp. 3041-3049 ◽  
Author(s):  
J. W. H. Yong ◽  
S. N. Tan ◽  
Y. F. Ng ◽  
K. K. K. Low ◽  
S. F. Peh ◽  
...  
Keyword(s):  
Comparative Study ◽  
Continuous Flow ◽  
Dry Weight ◽  
Pteris Vittata ◽  
Uptake Efficiency ◽  
Fern Species ◽  
Arsenic Hyperaccumulation ◽  
The Comparative Study ◽  
Pityrogramma Calomelanos ◽  
Better Than

This work comprised of the comparative study of arsenic (As) uptake efficiency by Pteris vittata and Pityrogramma calomelanos grown in (i) As amended soils (0–600 ppm) and (ii) As tainted water (40 ppb) using a new compact continuous flow phytofiltration system in a tropical greenhouse. The As hyperaccumulation efficiency was dependent on the growth medium for the two fern species. The highest level of As detected in the fronds of P. vittata was 19,300 ± 190 ppm (dry weight basis) and 11,600 ± 230 ppm for Pityrogramma calomelanos, after growing for 78 days in soils amended with As. In the compact continuous flow As phytofiltration system experiments, Pityrogramma calomelanos was found to perform better than P. vittata in phytofiltrating As contaminated water under waterlogged conditions. During the 167 h of phytofiltration experiment, the removal efficiency was approximately 99% and 67% for Pityrogramma calomelanos and P. vittata systems respectively, based on an initial 40 ppb As. Pityrogramma calomelanos also required a shorter acclimatization time than P. vittata under waterlogged conditions.

scholarly journals In Vitro Conservation of Some Threatened and Economically Important Ferns Belonging to the Indian Subcontinent

2014 ◽  
Vol 2014 ◽  
pp. 1-8 ◽  
Author(s):  
Shastri P. Shukla ◽  
P. B. Khare
Keyword(s):  
Indian Subcontinent ◽  
Multiple Shoot ◽  
Pteris Vittata ◽  
Western Ghat ◽  
Axillary Shoot ◽  
Mass Multiplication ◽  
Fern Species ◽  
Pityrogramma Calomelanos ◽  
Spore Culture

This study was undertaken to identify methods of mass multiplication for five ornamental, economically important ferns (Nephrolepis biserrata (Sw.) Schott., N. cordifolia cv. ‘‘duffii’’ (L.) Presl., N. exaltata cv. bostoniensis (L.) Schott., Pteris vittata L., and Cyclosorus dentatus Link.,) and three threatened ferns, namely, Cyathea spinulosa Wall. ex. Hook, Pityrogramma calomelanos (L.) Link., and Microsorum punctatum (L.) Schott., through in vitro techniques. Collections were made from different biodiversity zones of India including Northeast Himalayas, Kumaon Himalayas, and Western Ghat and successfully introduced and grown in a fern-house. Aseptic cultures were raised at the morphogenic level of callus, axillary shoot, multiple shoot, and rooted plants. An optimized medium is described for each fern species. Plantlets were also produced from spore culture of Cyathea spinulosa and successfully hardened under fern house conditions.

scholarly journals Fern inventorization in Cunca Rami Waterfall Zone of West Manggarai, East Nusa Tenggara

2021 ◽  
Vol 7 (1) ◽  
pp. 218-234
Author(s):  
Muh Sri Yusal ◽  
Gervinus Toni
Keyword(s):  
Local Government ◽  
Environmental Conditions ◽  
Random Sampling ◽  
Pteris Vittata ◽  
Natural Beauty ◽  
Family Types ◽  
Fern Species ◽  
High Level ◽  
Pityrogramma Calomelanos ◽  
Pteris Vittata L

The tourist area of Cunca Rami Waterfall has natural beauty and environmental conditions allow ferns (pteridophyta) to grow and develop diversity high level. This study aims to inventory the types ferns potential in the Cunca Rami West Manggarai waterfall zone East Nusa Tenggara Province, so that is expected to become important information material for the community and local government in developing natural potential-based tourism owned by West Manggarai Regency. Inventory of ferns was carried out through an exploratory method with random sampling which were subsequently identified by reference to the flora book Steenis, et al (2008). The results showed that there were 15 fern types, namely Adiantum diapahnum L.; Drynaria sparsisora (Desv.) More; Pityrogramma calomelanos Link.; Plagigyra sp.; Asplenium belangeri Bory; Asplenium caudatum forst.; Davalia sp.; Diplazium esculentum Swarz.; Dryopteris ferox; Dryopteris pteroides; Lindsaea decomposita Willd; Nephrolepis exaltata schott.; Nephrolepis sp.; Pteris biaurita L.; Pteris vittata L. Then classified into 8 family types, namely Polypodiaceae, Aspleniaceae, Davalliaceae, Athyriaceae, Dryopteridaceae, Lindsacaceae, Neprolepidaceae, and Pteridaceae. Fern species in the Cunca Rami Waterfall area has great potential, but the surrounding community has not utilized use potential full.

Study on Arsenic Removal in the Simulating Constructed Wetland

2013 ◽  
Vol 777 ◽  
pp. 386-389
Author(s):  
Jun Ying Zhao ◽  
Hua Ming Guo
Keyword(s):  
Constructed Wetland ◽  
Arsenic Removal ◽  
Early Stage ◽  
Arsenic Concentration ◽  
Pteris Vittata ◽  
Small Scale ◽  
Arsenic Content ◽  
Main Role ◽  
Batch Tests ◽  
Concentration Changes

Arsenic concentration changes in small-scale simulating constructed wetland composed with shale ceramic, zeolite, quartz sand andPteris vittatawere examined. During arsenic removal by the constructed wetlands, arsenic interception by the natural media played the main role in the early stage andPteris vittatauptake played the key role for arsenic removal in the later stable stage. When As (III) concentration in inflow was about 1 mg/L, the arsenic removal ratio by the two was between 22.2% and 66.6% and kept about 33% in the end. Arsenic average content in fronds and roots ofPteris vittataafter experiments were respectively 17610 and 2491 mg/kg. Transfer factor was 7.08. Compared with batch tests, arsenic content accumulated in plants increased significantly.

scholarly journals MODIFICATION OF OXIDIZED ACTIVATED CARBON SURFACE BY Fe AND Mn FOR ARSENIC REMOVAL FROM AQUEROUS SOLUTION

2018 ◽  
Vol 56 (2C) ◽  
pp. 80-87
Author(s):  
Pham Thi Hai Thinh
Keyword(s):  
Activated Carbon ◽  
Arsenic Removal ◽  
Arsenic Concentration ◽  
Carbon Surface ◽  
Batch Adsorption ◽  
Arsenic Adsorption ◽  
Removal Capacity ◽  
Adsorption Capacities ◽  
Oxidation Efficiency ◽  
Oxidized Activated Carbon

Carboxylate groups on oxidized activated carbon surface were transformed to the forms of Mn2+ and Fe3+ (signed as OAC-Mn and OAC-Fe respectively) through multi-step procedure. This modified activated carbon then was used as an adsorption material for arsenic removing from aqueous solution. Synthetic water containing As(III) and As(V) was used for study of arsenic adsorption capacities of OAC-Fe and OAC-Mn. The similar study had also been done with original granular activated carbon for comparison. The effects of modified metals onto oxidized activated carbon, metals doses and initial arsenic concentration on the removal of As(III), As(V) have been surveyed and discussed. Batch adsorption experiments were carried out with arsenic concentration in the range of 1 – 50 mg/l. Langmuir models were used for the adsorption isotherm screening. The results showed that both of OAC-Fe and OAC-Mn have good adsorption capacities for As(III) but OAC-Fe has a greater removal capacity for As(V) than OAC-Mn. OAC-Mn was identified as a good material for the of As(III) removal, because of its oxidation efficiency of As(III) to As(V) during adsorption process.

Evaluation of the Adsorption Potential of Synthesized Anatase Nanoparticles for Arsenic Removal

2011 ◽  
Vol 1317 ◽  
Author(s):  
Z. Özlem Kocabaş ◽  
Yuda Yürüm
Keyword(s):  
Arsenic Removal ◽  
Sol Gel ◽  
Arsenic Concentration ◽  
Equilibrium Concentration ◽  
Arsenic Species ◽  
Batch Adsorption ◽  
Adsorption Models ◽  
Removal Capacity ◽  
Anatase Nanoparticles ◽  
Langmuir And Freundlich Models

ABSTRACTTitanium dioxide has been extensively tested in environmental applications, especially in separation technologies. In the present study, anatase nanoparticles were synthesized by using a sol-gel method, and batch adsorption experiments were carried out to analyze arsenic removal capacity of the anatase nanoparticles from water. The maximum arsenic removal percentages were found ~ 84 % for As(III) at pH 8 and ~98% for As(V) at pH 3, respectively, when 5 g/l anatase nanoparticles were used at an initial arsenic concentration of 1 mg/l. The results of the sorption experiments, which take into consideration the effects of equilibrium concentration on adsorption capacity, were analyzed with two popular adsorption models, Langmuir and Freundlich models. From the comparison of R2 values, the adsorption isotherm for As(III) was fitted satisfactorily well to the Langmuir equation (R2 > 0.996) while the adsorption behavior of As(V) on anatase nanoparticles was described better with Freundlich equation (R2 > 0.991). This study proposes the potential adsorbent material for water which is contaminated with arsenic species.

Four years of development and field-testing of IHE arsenic removal family filter in rural Bangladesh

2008 ◽  
Vol 58 (1) ◽  
pp. 53-58 ◽  
Author(s):  
B. Petrusevski ◽  
S. Sharma ◽  
W. G. van der Meer ◽  
F. Kruis ◽  
M. Khan ◽  
...  
Keyword(s):  
Arsenic Removal ◽  
Local Population ◽  
Iron Concentration ◽  
Arsenic Concentration ◽  
Field Testing ◽  
Arsenic Adsorption ◽  
Arsenic Level ◽  
Rural Bangladesh ◽  
Removal Capacity ◽  
Guideline Value

UNESCO-IHE has been developing an arsenic removal family filter with a capacity of 100 L/day based on arsenic adsorption onto iron oxide coated sand, a by-product of iron removal plants. The longer term and field conditions performance of the third generation of eleven family filters prototypes were tested in rural Bangladesh for 30 months. All filters achieved initially highly effective arsenic removal irrespective of arsenic concentration and groundwater composition. Arsenic level in filtrate reached 10 μg/l after 50 days of operation at one testing site and after 18 months of continuous operation at other 3 testing sites. Arsenic level at other 7 sites remained below the WHO guideline value till the end of study. Positive correlation was found between arsenic removal capacity of the filter and iron concentration in groundwater. In addition to arsenic, iron present in groundwater at all testing sites was also removed highly effectively. Manganese removal with IHE family filter was effective only when treating groundwater with low ammonia. A simple polishing sand filter, after IHE family filter, resulted in consistent and effective removal of manganese. IHE family filters were easy to operate and were well accepted by the local population.

As(III) Removal by Dynamic Adsorption onto Amberlite XAD7 Functionalized with Crown Ether and Doped with Fe(III) Ions

2019 ◽  
Vol 70 (7) ◽  
pp. 2330-2334
Author(s):  
Mihaela Ciopec ◽  
Adina Negrea ◽  
Narcis Duteanu ◽  
Corneliu Mircea Davidescu ◽  
Iosif Hulka ◽  
...  
Keyword(s):  
Adsorption Process ◽  
Arsenic Removal ◽  
Arsenic Concentration ◽  
Fixed Bed ◽  
World Health ◽  
Arsenic Content ◽  
Arsenic Adsorption ◽  
Stage Of Development ◽  
Wide Range ◽  
Health Organization

Arsenic content in groundwater�s present a wide range of concentration, ranging from hundreds of micrograms to thousands of micrograms of arsenic per litter, while the maximum permitted arsenic concentration established by World Health Organization (WHO) is 10 mg L-1. According to the WHO all people, regardless of their stage of development and their social economic condition, have the right to have access to adequate drinking water. The most efficient and economic technique used for arsenic removal is represented by adsorption. In order to make this remediation technique more affordable and environmentally friendly is important to new materials with advance adsorbent properties. Novelty of present paper is represented by the usage of a new adsorbent material obtained by physical - chemical modification of Amberlite XAD polymers using crown ethers followed by iron doping, due to well-known affinity of arsenic for iron ions. Present paper aims to test the obtained modified Amberlite polymer for arsenic removal from real groundwater by using adsorption in a fixed bed column, establishing in this way a mechanism for the adsorption process. During experimental work was studied the influence of competing ions from real water into the arsenic adsorption process.

scholarly journals Evaluation of Fe-Mg Binary Oxide for As (III) Adsorption—Synthesis, Characterization and Kinetic Modelling

Nanomaterials ◽  
2021 ◽  
Vol 11 (3) ◽  
pp. 805
Author(s):  
Saif Ullah Khan ◽  
Rumman Zaidi ◽  
Feroz Shaik ◽  
Izharul Haq Farooqi ◽  
Ameer Azam ◽  
...  
Keyword(s):  
Arsenic Removal ◽  
Kinetic Modelling ◽  
Arsenic Concentration ◽  
Experimental Studies ◽  
Precipitation Method ◽  
Arsenic Adsorption ◽  
Adsorbent Dosage ◽  
X Ray ◽  
Co Precipitation ◽  
Contaminated Waters

Nanotechnology has received much attention in treating contaminated waters. In the present study, a facile co-precipitation method was employed to synthesize a novel iron and magnesium based binary metal oxide using a stoichiometrically fixed amount of FeNO3.9H2O and MgNO3.6H2O in a proportion of molar concentration 1:1 and was later evaluated in removing As (III) from contaminated waters. Characterization of the prepared nanomaterial was done using X-ray diffraction (XRD), scanning electron microscopy (SEM), Energy Dispersive X-Ray Analysis (EDAX) and ultraviolet–visible spectrophotometry (UV-VIS). Experimental studies on batch scale were carried out, examining the effect of varying initial concentrations of metal, adsorbent dosage, application time and initial pH on removal efficiency. Arsenic removal increased on increasing adsorbent dosage (0.1–1 g/L) but trend reversed on increasing initial arsenic concentration attaining qmax of 263.20 mg/g. Adsorption was quite efficient in pH range 4–8. Freundlich fitted better for adsorption isotherm along with following Pseudo-2nd order kinetics. The reusability and effect of co-existing ions on arsenic adsorption, namely SO42−, CO32− and PO43− were also explored with reusability in 1st and 2nd cycles attained adsorptive removal up to 77% and 64% respectively. The prepared nano-adsorbent showed promising results in terms of high arsenic uptake (qmax of 263.20 mg/g) along with facile and cost-effective synthesis. Thus, the co-precipitation technique used in this work is a simple one step procedure without any use of any precursor as compared to most of the other procedures used for synthesis.

Sign in / Sign up

Export Citation Format

Share Document