scholarly journals Response of an optical cavity to phase-controlled incomplete power switching of nearly resonant incident light

2018 ◽  
Vol 26 (5) ◽  
pp. 5644 ◽  
Author(s):  
Szymon Wójtewicz ◽  
Agata Cygan ◽  
Jolanta Domysławska ◽  
Katarzyna Bielska ◽  
Piotr Morzyński ◽  
...  
2021 ◽  
Author(s):  
Jiayuan Du ◽  
Xinyu Zhao ◽  
Xiaodong Sun ◽  
Jinyao Zeng ◽  
Xinhua Hu

Abstract The signal-to-noise ratio of infrared photodetectors can be improved by using resonant cavities, whereas the enhancement effect usually occurs in a narrow wavelength range. Here, we propose a dual-mode plasmonic resonant cavity which can enhance the performance of infrared photodetectors in a wide range of wavelengths from 3.5 μm to 5.5 μm. The optical cavity consists of an Au grating, an ultrathin (310 nm) detective layer of mercury cadmium telluride, and an Au film, which can exhibit nearly perfect absorption at resonant wavelengths with using optimal parameters. For the target wavelength range, the wavelength-averaged absorption in the detective layer can also be 62%, about 12 times of that without the resonant cavity. Such a high enhancement of absorption can occur for incident light in a broad range of angle (θ < 45⁰) and with different polarizations.


Atoms ◽  
2020 ◽  
Vol 8 (4) ◽  
pp. 93
Author(s):  
Angel T. Gisbert ◽  
Nicola Piovella

Cold atomic clouds in collective atomic recoil lasing are usually confined by an optical cavity, which forces the light-scattering to befall in the mode fixed by the resonator. Here we consider the system to be in free space, which leads into a vacuum multimode collective scattering. We show that the presence of an optical cavity is not always necessary to achieve coherent collective emission by the atomic ensemble and that a preferred scattering path arises along the major axis of the atomic cloud. We derive a full vectorial model for multimode collective atomic recoil lasing in free space. Such a model consists of multi-particle equations capable of describing the motion of each atom in a 2D/3D cloud. These equations are numerically solved by means of molecular dynamic algorithms, usually employed in other scientific fields. The numerical results show that both atomic density and collective scattering patterns are applicable to the cloud’s orientation and shape and to the polarization of the incident light.


2019 ◽  
Vol 139 (8) ◽  
pp. 345-350
Author(s):  
Toru Tagawa ◽  
Tomohiko Yamashita ◽  
Takashi Sakugawa ◽  
Sunao Katsuki ◽  
Kenzi Hukuda ◽  
...  

2020 ◽  
Vol 2020 (2) ◽  
pp. 100-1-100-6
Author(s):  
Takuya Omura ◽  
Hayato Watanabe ◽  
Naoto Okaichi ◽  
Hisayuki Sasaki ◽  
Masahiro Kawakita

We enhanced the resolution characteristics of a threedimensional (3D) image using time-division multiplexing methods in a full-parallax multi-view 3D display. A time-division light-ray shifting (TDLS) method is proposed that uses two polarization gratings (PGs). As PG changes the diffraction direction of light rays according to the polarization state of the incident light, this method can shift light rays approximately 7 mm in a diagonal direction by switching the polarization state of incident light and adjusting the distance between the PGs. We verified the effect on the characteristics of 3D images based on the extent of the shift. As a result, the resolution of a 3D image with depth is improved by shifting half a pitch of a multi-view image using the TDLS method, and the resolution of the image displayed near the screen is improved by shifting half a pixel of each viewpoint image with a wobbling method. These methods can easily enhance 3D characteristics with a small number of projectors.


Author(s):  
A. G. Belova ◽  
E. V. Zimina ◽  
N. P. Simbirtsev

During a pathoanatomic autopsy, it is very important to correctly assess the color change of the organs. However, it is not always clear because the color depends on the spectrum of the incident light. There is also a subjective assessment of color. In addition, in animals with large amounts of circulating blood, for example, dogs, early imbibition occurs, which makes it difficult to assess the color of the organ and pathoanatomical diagnosis. We have proposed a simple and visual method of recognition of two pathological processes – inflammation and edema using colored filters. This technique also allows to accurately differentiate inflammation from postmortem imbibition, to recognize fibrin and hemorrhage well. Postmortem examination of different types of animals (predacious families of mustelids, canids, felids) was performed in accordance with Shore’s method in the prosectorium of the Pathonomy Department, K.I. Skryabin Moscow State Academy of Veterinary Medicine and Biotechnology visual analysis – under various artificial lights (fluorescent lamps with banded spectrum and halogen lamps). In the red filter are well identified the pathological processes associated with the venous blood presence in the tissues (venous hyperemia and pulmonary edema). The focus of venous hyperemia or edema in the red filter looks like a dark zone, and tissues, where arterial bloods predominated, aren’t detected in red filter. In the yellow – green filter the inflammation is clearly detected: the zone is brightly red and surrounding tissues become dark. Red colour filters have rather narrow band of transmittance from 600 to 700 nm. Yellow-green have a width zone – from 500 to 700 nm, including both red, and yellow-green part of spectrum. Oxidized hemoglobin in red part of spectrum absorbs ten time weaker, has more high reflectivity and looks red. Surrounding tissues reflect the red rays, which incident on them also red. Therefore, the zone of edema, venous hyperemia and hemorrhaging, containing venous blood, are detected the dark spot, and inflammation zone merges with the red background. Oxidized hemoglobin in the red spectrum part absorbs ten time weaker than reduced hemoglobin, has high reflectivity of the red spectrum part and looks brightly red, surrounding tissues reflect yellow-green spectrum part and look green. Therefore, the zones of inflammation, active hyperemia and hemorrhaging, containing arterial blood, sharp contrast with green background and are clearly visible. Diagnoses made with the help of color filters are confirmed by histological studies.


Author(s):  
Apangshu Das ◽  
Sambhu Nath Pradhan

Background: Output polarity of the sub-function is generally considered to reduce the area and power of a circuit at the two-level realization. Along with area and power, the power-density is also one of the significant parameter which needs to be consider, because power-density directly converges to circuit temperature. More than 50% of the modern day integrated circuits are damaged due to excessive overheating. Methods: This work demonstrates the impact of efficient power density based logic synthesis (in the form of suitable polarity selection of sub-function of Programmable Logic Arrays (PLAs) for its multilevel realization) for the reduction of temperature. Two-level PLA optimization using output polarity selection is considered first and compared with other existing techniques and then And-Invert Graphs (AIG) based multi-level realization has been considered to overcome the redundant solution generated in two-level synthesis. AIG nodes and associated power dissipation can be reduced by rewriting, refactoring and balancing technique. Reduction of nodes leads to the reduction of the area but on the contrary increases power and power density of the circuit. A meta-heuristic search approach i.e., Nondominated Sorting Genetic Algorithm-II (NSGA-II) is proposed to select the suitable output polarity of PLA sub-functions for its optimal realization. Results: Best power density based solution saves up to 8.29% power density compared to ‘espresso – dopo’ based solutions. Around 9.57% saving in area and 9.67% saving in power (switching activity) are obtained with respect to ‘espresso’ based solution using NSGA-II. Conclusion: Suitable output polarity realized circuit is converted into multi-level AIG structure and synthesized to overcome the redundant solution at the two-level circuit. It is observed that with the increase in power density, the temperature of a particular circuit is also increases.


1995 ◽  
Vol 60 (11) ◽  
pp. 1875-1887 ◽  
Author(s):  
Jaroslav Holoubek ◽  
Miroslav Raab

Theoretical background for an optical method is presented which makes it possible to distinguish unambiguously between voids and particles as light scattering sites in polymeric materials. Typical dependences of turbidity as a function of diameter of scattering elements, their volume fractions and also turbidity curves as a function of the wavelength of the incident light were calculated, based both on the Lorenz-Mie theory and the fluctuation theory. Such dependences calculated for polypropylene-containing voids on the one hand and particles, differing only slightly from the surrounding matrix in their refractive index, on the other hand, are markedly different. The most significant results are: (i) Turbidity is at least by two orders of magnitude larger for voids in comparison to embedded particles of ethylene-propylene (EPDM) rubber of the same size, concentration and at the same wavelength. (ii) The wavelength dependence of turbidity for EPDM particles and the inherent refractive index fluctuations in the polypropylene matrix is much steeper as compared to voids for all considered diameters (0.1-10 μm). Thus, the nature of stress whitening in complex polymeric materials can be determined from turbidity measurements.


2015 ◽  
Vol 3 (21) ◽  
pp. 5377-5382 ◽  
Author(s):  
Kyu-Tae Lee ◽  
Masanori Fukuda ◽  
Suneel Joglekar ◽  
L. Jay Guo

Optical cavity-integrated perovskite solar cells capable of creating distinctive semitransparent colors with high efficiencies are demonstrated.


Sign in / Sign up

Export Citation Format

Share Document