scholarly journals Chemical and Plant Mediated Synthesis of La2O3 Nanoparticles and Comparison of their Structural, Antibacterial, Photocatalytic and Optical Properties

2021 ◽  
Vol 33 (3) ◽  
pp. 570-576
Author(s):  
A. Swetharanyam ◽  
R. Kunjitham

The La2O3 nanoparticles have been synthesized successfully with a chemical and biosynthesized method. The optical bandgap energy and of chemically synthesized or biosynthesized (M. oppositifolia and T. portlacaustrum leaf extract) La2O3 nanoparticles was calculated from UV-visible absorption between 5.10, 4.26 and 4.46 eV. The good polycrystalline cubic nature of synthesized La2O3 nanoparticles was evident from the bright circular SAED pattern, consistent with the XRD outcome. It is clear that the non-polar extracts could function as stabilizers for La2O3 nanoparticles through attachment to the counterions. The La2O3 nanoparticles have been used as efficient photocatalyst to degrade acid black 1 dye under sunlight irradiation. Besides, this biocatalyst showed excellent ability to degrade biosynthesized La2O3 nanoparticles (T. portlacaustrum) under visible light irradiation 87%. Synthesis of La2O3 nanoparticles by green chemistry process presented good antibacterial activity against Gram-negative and Gram-positive bacteria.

2020 ◽  
Vol 20 (6) ◽  
pp. 3896-3901 ◽  
Author(s):  
Jyoti Bansal ◽  
A. K. Hafiz ◽  
Shailesh Narain Sharma

Photoactive degradation of textile malachite green (MG), methylene blue (MB) dyes has been permeated on metal oxide TiO2 nanoparticles under sunlight. Semiconductor photocatalysis is a promising method for removal of toxic chemicals from wastewater produced by industry. Due to tunable bandgap, TiO2 among various semiconductor studied mostly. Large band gap (UV active) and recombination of exciton in TiO2 less active in photo degradation. Noble metals such as gold nanoparticles deposited on TiO2 surface increased the optical activity and to shift optical response to visible region. Degradation detail has been carried out by characterisation such as XRD, UV-Vis, PL, TEM, and SEM for MG and MB textile dyes under sunlight irradiation. UV-visible absorption spectra and PL spectra shows that photo-response of as prepared sample is extended from UV to visible region. PL intensity decreases with increases in concentration of Au nanoparticles, decreases in intensity in optical spectra of Au–TiO2 composites shows that charge transfer process dominates. Au–TiO2 plays an essential role in enhancing photocatalytical activity. Decolorization optimization depends on catalyst concentration, Dye concentration, light intensity and, irradiation time.


2014 ◽  
Vol 1051 ◽  
pp. 392-397
Author(s):  
T.V.M. Sreekanth ◽  
In Yong Eom

Gold nanoparticles (AuNPs) can be prepared in a number of chemical techniques, which are not environmentally friendly. Biosynthesis of nanoparticles by plant extracts is currently under exploitation. In this work, we describe an eco-friendly technique for green synthesis of AuNPs from AuCl4 solution using the Houttuynia cordata leaf extract as reducing agent. The AuNPs were characterized using UV-Visible spectroscopy, SEM, TEM, FTIR and AFM. The UV-Visible spectra indicate a strong plasma resonance that is located at 535 nm. The antibacterial activity of AuNPs was performed on various gram positive and gram negative bacteria. The AuNPs showed more inhibitory activity on gram negative than gram positive bacteria.


2016 ◽  
Vol 69 (4) ◽  
pp. 478 ◽  
Author(s):  
Gaopeng Dai ◽  
Tao Wang ◽  
Suqin Liu ◽  
Ying Liang ◽  
Wen Xu

TiO2/g-C3N4 composites with macrochannel structure were successfully synthesised without using templates by the simple dropwise addition of tetrabutyl titanate containing graphitic carbon nitride (g-C3N4) to a water-ethanol mixed solution, which was then calcined at 400°C. The as-prepared samples were characterised by X-ray diffraction, scanning electron microscopy, and UV-visible absorption spectroscopy. The photocatalytic activities of the samples were evaluated by the photocatalytic degradation of methyl orange in an aqueous medium under visible-light and simulated sunlight irradiation. The results show that the g-C3N4 content in TiO2/g-C3N4 composites plays an important role in the formation of macrochannels. Only samples containing less than 10 wt-% of g-C3N4 exhibit macrochannel structure. TiO2/g-C3N4 composites with macrochannel structure displayed enhanced photocatalytic activity. G-C3N4 content exhibited an obvious influence on photocatalytic performance, and the optimal loading of g-C3N4 was 10 wt-%. The enhanced photocatalytic activity could be attributed to the synergetic effects of the macrochannel structure, the large specific surface area, and the heterojunction between TiO2 and g-C3N4. The main oxidative species responsible for the photodegradation of pollutants were further confirmed by the trapping experiments.


2005 ◽  
Vol 14 (04) ◽  
pp. 573-579 ◽  
Author(s):  
SANG-GU LEE ◽  
YOUNG-WOO KWAK ◽  
JONG-WOOK PARK ◽  
SUNG-HO JIN ◽  
YEONG-SOON GAL

Poly(9,9-dipropargylfluorene) [PDPF] was prepared via oxidative coupling reaction of dipropargylfluorene in the presence of (PPh3)2PdCl2/CuI without oxygen in high yield. The polymer structure was characterized by the instrumental methods such as NMR, IR, and UV-visible spectroscopies to have the designed chemical structure. PDPF showed characteristic UV-visible absorption band at 338 nm and blue PL spectrum at 417 nm corresponding to the photon energy of 2.98 eV under the excitation wavelength of 350 nm. The bandgap energy of this material was estimated to be 3.67 eV from the analysis of the absorption edge.


2020 ◽  
Vol 15 (6) ◽  
pp. 665-679
Author(s):  
Alok K. Srivastava ◽  
Lokesh K. Pandey

Background: [1, 3, 4]oxadiazolenone core containing chalcones and nucleosides were synthesized by Claisen-Schmidt condensation of a variety of benzaldehyde derivatives, obtained from oxidation of substituted 5-(3/6 substituted-4-Methylphenyl)-1, 3, 4-oxadiazole-2(3H)-one and various substituted acetophenone. The resultant chalcones were coupled with penta-O-acetylglucopyranose followed by deacetylation to get [1, 3, 4] oxadiazolenone core containing chalcones and nucleosides. Various analytical techniques viz IR, NMR, LC-MS and elemental analysis were used to confirm the structure of the synthesised compounds.The compounds were targeted against Bacillus subtilis, Staphylococcus aureus and Escherichia coli for antibacterial activity and Aspergillus flavus, Aspergillus niger and Fusarium oxysporum for antifungal activity. Methods: A mixture of Acid hydrazides (3.0 mmol) and N, Nʹ- carbonyl diimidazole (3.3 mmol) in 15 mL of dioxane was refluxed to afford substituted [1, 3, 4]-oxadiazole-2(3H)-one. The resulted [1, 3, 4]- oxadiazole-2(3H)-one (1.42 mmol) was oxidized with Chromyl chloride (1.5 mL) in 20 mL of carbon tetra chloride and condensed with acetophenones (1.42 mmol) to get chalcones 4. The equimolar ratio of obtained chalcones 4 and β -D-1,2,3,4,6- penta-O-acetylglucopyranose in presence of iodine was refluxed to get nucleosides 5. The [1, 3, 4] oxadiazolenone core containing chalcones 4 and nucleosides 5 were tested to determined minimum inhibitory concentration (MIC) value with the experimental procedure of Benson using disc-diffusion method. All compounds were tested at concentration of 5 mg/mL, 2.5 mg/mL, 1.25 mg/mL, 0.62 mg/mL, 0.31 mg/mL and 0.15 mg/mL for antifungal activity against three strains of pathogenic fungi Aspergillus flavus (A. flavus), Aspergillus niger (A. niger) and Fusarium oxysporum (F. oxysporum) and for antibacterial activity against Gram-negative bacterium: Escherichia coli (E. coli), and two Gram-positive bacteria: Staphylococcus aureus (S. aureus) and Bacillus subtilis(B. subtilis). Result: The chalcones 4 and nucleosides 5 were screened for antibacterial activity against E. coli, S. aureus and B. subtilis whereas antifungal activity against A. flavus, A. niger and F. oxysporum. Compounds 4a-t showed good antibacterial activity whereas compounds 5a-t containing glucose moiety showed better activity against fungi. The glucose moiety of compounds 5 helps to enter into the cell wall of fungi and control the cell growth. Conclusion: Chalcones 4 and nucleosides 5 incorporating [1, 3, 4] oxadiazolenone core were synthesized and characterized by various spectral techniques and elemental analysis. These compounds were evaluated for their antifungal activity against three fungi; viz. A. flavus, A. niger and F. oxysporum. In addition to this, synthesized compounds were evaluated for their antibacterial activity against gram negative bacteria E. Coli and gram positive bacteria S. aureus, B. subtilis. Compounds 4a-t showed good antibacterial activity whereas 5a-t showed better activity against fungi.


Polymers ◽  
2021 ◽  
Vol 13 (10) ◽  
pp. 1648
Author(s):  
Muaffaq M. Nofal ◽  
Shujahadeen B. Aziz ◽  
Jihad M. Hadi ◽  
Wrya O. Karim ◽  
Elham M. A. Dannoun ◽  
...  

In this work, a green approach was implemented to prepare polymer composites using polyvinyl alcohol polymer and the extract of black tea leaves (polyphenols) in a complex form with Co2+ ions. A range of techniques was used to characterize the Co2+ complex and polymer composite, such as Ultraviolet–visible (UV-Visible) spectroscopy, Fourier transform infrared spectroscopy (FTIR), and X-ray diffraction (XRD). The optical parameters of absorption edge, refractive index (n), dielectric properties including real and imaginary parts (εr, and εi) were also investigated. The FRIR and XRD spectra were used to examine the compatibility between the PVA polymer and Co2+-polyphenol complex. The extent of interaction was evidenced from the shifts and change in the intensity of the peaks. The relatively wide amorphous phase in PVA polymer increased upon insertion of the Co2+-polyphenol complex. The amorphous character of the Co2+ complex was emphasized with the appearance of a hump in the XRD pattern. From UV-Visible spectroscopy, the optical properties, such as absorption edge, refractive index (n), (εr), (εi), and bandgap energy (Eg) of parent PVA and composite films were specified. The Eg of PVA was lowered from 5.8 to 1.82 eV upon addition of 45 mL of Co2+-polyphenol complex. The N/m* was calculated from the optical dielectric function. Ultimately, various types of electronic transitions within the polymer composites were specified using Tauc’s method. The direct bandgap (DBG) treatment of polymer composites with a developed amorphous phase is fundamental for commercialization in optoelectronic devices.


1998 ◽  
Vol 76 (12) ◽  
pp. 1910-1915 ◽  
Author(s):  
Robert A McClelland ◽  
Victoria E Licence ◽  
John P Richard ◽  
Kathleen B Williams ◽  
Shrong-Shi Lin

4-Methoxybenzyl cations bearing α-(N,N-dimethylcarbamoyl) and α-(N,N-dimethylthiocarbamoyl) substituents have been generated photochemically upon irradiation of precursors with pentafluorobenzoate or 4-methoxybenzoate leaving groups. The ions have been observed with flash photolysis in 40:60 acetonitrile:water and in 50:50 methanol:water, and rate constants were measured for their decay in solvent alone and for their capture by azide ion. The cations so studied and their lifetimes in 40% acetonitrile are 6, ArC+H-CONMe2, 0.6 μs; 2, ArC+H-CSNMe2, 7 ms; and 4, ArC+(CH3)-CSMe2, 6 ms, where Ar = 4-MeOC6H4. The cation 4 reacts with solvent by elimination of a proton from the α-methyl group, and the rate constant for solvent addition must be less than 1 s-1. The CSNMe2 substituted cations are 105-107-fold longer lived than analogs where the thioamide group has been replaced with an α-methyl. The UV-visible absorption spectra of these two cations also show significant differences from those of typical 4-methoxybenzyl cations. Thus, both the lifetimes and spectra point to a strong interaction of the benzylic centre with the thioamide group. Key words: flash photolysis, thiocarbamoyl stabilized carbocation, photosolvolysis.


RSC Advances ◽  
2016 ◽  
Vol 6 (88) ◽  
pp. 84712-84721 ◽  
Author(s):  
Maria A. Cardona ◽  
Marina Kveder ◽  
Ulrich Baisch ◽  
Michael R. Probert ◽  
David C. Magri

Two phenyl β-aminobisulfonate ligands characterised by UV-visible absorption, EPR and 1H NMR spectroscopy exhibit evidence for binding with Cu2+ in water and methanol.


Sign in / Sign up

Export Citation Format

Share Document