Cyclic Tests of Reinforced Concrete Coupling Beam with Intermediate Span-to-Depth Ratio

2016 ◽  
Vol 113 (3) ◽  
Author(s):  
Erwin Lim ◽  
Shyh-Jiann Hwang ◽  
Chih-Hung Cheng ◽  
Pin-Yi Lin
Keyword(s):  
Reinforced Concrete ◽  
Coupling Beam ◽  
Cyclic Tests ◽  
Depth Ratio

Seismic Behavior of Reinforced Concrete Core Wall under Different Span-Depth Ratio of Coupling Beam

2012 ◽  
Vol 594-597 ◽  
pp. 653-656
Author(s):  
Peng Jia
Keyword(s):  
Reinforced Concrete ◽  
Carrying Capacity ◽  
Seismic Behavior ◽  
Hysteretic Behavior ◽  
Width Ratio ◽  
Load Carrying Capacity ◽  
Coupling Beam ◽  
Concrete Core ◽  
Depth Ratio ◽  
Load Carrying

Two reinforced concrete core wall models with large height-width ratio were built and tested to failure under the combined action of constant axial load and reversed cyclic lateral load. The span-depth ratio of coupling beam on each core wall was focused on. This paper presents the results, including failure mode, hysteretic behavior, load-carrying capacity, ductility, energy dissipation ability. With the span-depth ratio of coupling beam dropping from 1.7 to 0.9, stiffness and load-carrying capacity of the specimen had risen markedly, but the ductility performance dropped significantly. It can be seen that the span-depth ratio of coupling beam having important effect on the seismic behavior of reinforced concrete core wall.

scholarly journals Effect of the Notch-to-Depth Ratio on the Post-Cracking Behavior of Steel-Fiber-Reinforced Concrete

Materials ◽  
2021 ◽  
Vol 14 (2) ◽  
pp. 445
Author(s):  
José Valdez Aguilar ◽  
César A. Juárez-Alvarado ◽  
José M. Mendoza-Rangel ◽  
Bernardo T. Terán-Torres
Keyword(s):  
Reinforced Concrete ◽  
Plain Concrete ◽  
Fiber Reinforced Concrete ◽  
Fiber Reinforced ◽  
Steel Fiber Reinforced Concrete ◽  
Cracking Behavior ◽  
Bending Tests ◽  
Depth Ratio ◽  
Residual Performance ◽  
Concrete Control

Concrete barely possesses tensile strength, and it is susceptible to cracking, which leads to a reduction of its service life. Consequently, it is significant to find a complementary material that helps alleviate these drawbacks. The aim of this research was to determine analytically and experimentally the effect of the addition of the steel fibers on the performance of the post-cracking stage on fiber-reinforced concrete, by studying four notch-to-depth ratios of 0, 0.08, 0.16, and 0.33. This was evaluated through 72 bending tests, using plain concrete (control) and fiber-reinforced concrete with volume fibers of 0.25% and 0.50%. Results showed that the specimens with a notch-to-depth ratio up to 0.33 are capable of attaining a hardening behavior. The study concludes that the increase in the dosage leads to an improvement in the residual performance, even though an increase in the notch-to-depth ratio has also occurred.

scholarly journals Shear behavior degradation and failure pattern of reinforced concrete beam with chloride-induced stirrup corrosion

2019 ◽  
Vol 22 (14) ◽  
pp. 2998-3010 ◽  
Author(s):  
Zhao-Hui Lu ◽  
Hai Li ◽  
Wengui Li ◽  
Yan-Gang Zhao ◽  
Zhuo Tang ◽  
...  
Keyword(s):  
Shear Strength ◽  
Reinforced Concrete ◽  
Concrete Beams ◽  
Concrete Strength ◽  
Shear Behavior ◽  
Reinforced Concrete Beams ◽  
Failure Pattern ◽  
Reinforcement Corrosion ◽  
Shear Span ◽  
Depth Ratio

Reinforcement corrosion exhibits an adverse effect on the shear strength of reinforced concrete structures. In order to investigate the effects of chloride-induced corrosion of reinforcing steel on the shear behavior and failure pattern of reinforced concrete beams, a total of 24 reinforced concrete beams with different concrete strength grades and arrangements of stirrups were fabricated, among which 22 beams were subjected to accelerated corrosion to achieve different degrees of reinforcement corrosion. The failure pattern, crack propagation, load–displacement response, and ultimate strength of these beams were investigated under a standard four-point loading test in this study. Extensive comparative analysis was conducted to investigate the effects of the concrete strength, shear span-to-depth ratio, and stirrup type on the shear behavior of the corroded reinforced concrete beams. The results show that increasing the stirrup yielding strength is more effective in improving the shear strength of corroded reinforced concrete beams than that of concrete compressive strength. In terms of three types of stirrups, the shear strength of the beams with deformed HRB-335 is least sensitive to stirrup corrosion, followed by the beams with smooth HPB-235 and the beams with deformed HRB-400. The effect of the different stirrups on the shear strength depends on the corrosion degree of stirrup and shear span-to-depth ratio of the beam. The predicted results of shear strength of corroded reinforced concrete beams by a proposed analytical model are well consistent with the experimental results.

scholarly journals Shear Behaviour of RC Beams Strengthened by Various Ultrahigh Performance Fibre-Reinforced Concrete Systems

2020 ◽  
Vol 2020 ◽  
pp. 1-18 ◽  
Author(s):  
Walid Mansour ◽  
Bassam A. Tayeh
Keyword(s):  
Reinforced Concrete ◽  
Mechanical Performance ◽  
Experimental Studies ◽  
Element Model ◽  
Shear Behaviour ◽  
Fibre Reinforced Concrete ◽  
Rc Beams ◽  
Shear Span ◽  
Depth Ratio ◽  
Normal Strength

This study presents a numerical investigation on the shear behaviour of shear-strengthened reinforced concrete (RC) beams by using various ultrahigh performance fibre-reinforced concrete (UHPFRC) systems. The proposed 3D finite element model (FEM) was verified by comparing its results with those of experimental studies in the literature. The validated numerical model is used to analyse the crucial parameters, which are mainly related to the design of RC beams and shear-strengthened UHPFRC layers, such as the effect of shear span-to-depth ratio on the shear behaviour of the strengthened or nonstrengthened RC beams and the effect of geometry and length of UHPFRC layers. Moreover, the effect of the UHPFRC layers’ reinforcement ratio and strengthening of one longitudinal vertical face on the mechanical performance of RC beams strengthened in shear with UHPFRC layers is investigated. Results of the analysed beams show that the shear span-to-depth ratio significantly affects the shear behaviour of not only the normal-strength RC beams but also the RC beams strengthened with UHPFRC layers. However, the effect of shear span-to-depth ratio has not been considered in existing design code equations. Consequently, this study suggests two formulas to estimate the shear strength of normal-strength RC beams and UHPFRC-strengthened RC beams considering the effect of the shear span-to-depth ratio.

scholarly journals Uniaxial Cyclic Tests on Reinforced Concrete Members with Lap Splices

2019 ◽  
Vol 35 (2) ◽  
pp. 1023-1043 ◽  
Author(s):  
Danilo Tarquini ◽  
João P. Almeida ◽  
Katrin Beyer
Keyword(s):  
Reinforced Concrete ◽  
Failure Modes ◽  
Local Deformation ◽  
Experimental Program ◽  
Loading History ◽  
Cyclic Tests ◽  
Continuous Reinforcement ◽  
Lap Splices ◽  
Lap Splice ◽  
Concrete Members

This data paper presents the quasi-static uniaxial cyclic tests of 24 reinforced concrete members, of which 22 feature lap splices and 2 are reference units with continuous reinforcement. The objective of the experimental program is to investigate the influence of lap splice length ( ls), confining reinforcement, and loading history on the behavior of lap splices. Particular attention is placed on the measurement of local deformation quantities, such as lap splice strains and rebar-concrete slip. Details of the geometry and reinforcement layout of the specimens as well as the employed test setup, instrumentation, and loading protocols are provided. The global behavior of the test units, including the observed crack pattern and failure modes, are discussed. The organization of the experimental data, which are made available for public use under DOI: 10.5281/zenodo.1205887, is outlined in detail.

Sign in / Sign up

Export Citation Format

Share Document