scholarly journals Experimental study on potential use of fly ash and GGBS from Jaipur plants in developing a self-compacting concrete

2018 ◽  
Vol 7 (4.5) ◽  
pp. 566
Author(s):  
Sushree Sangita Rautray ◽  
Manas Ranjan Das
Keyword(s):  
Fly Ash ◽  
Partial Replacement ◽  
Hardened Concrete ◽  
Self Compacting Concrete ◽  
Split Tensile Strength ◽  
Granulated Blast Furnace Slag ◽  
Slump Flow ◽  
Filling Ability ◽  
Essential Properties ◽  
Passing Ability

Self-Compacting Concrete (SCC) is becoming a popular choice in concrete industries due to its filling ability in congested reinforcement and its auto compacting nature. In the present work, an attempt has been made to investigate the properties of fresh and hardened concrete made by partial replacement of cement by fly ash and ground granulated blast furnace slag (ggbs) in different percentages. The essential properties of freshly prepared concrete like flowability, passing ability, filling ability are determined by slump flow test, slump flow T50cm, V-funnel, J-ring and L-box test. The values are found to satisfy EFNARC guidelines. Tests have also been conducted to assess and analyze the properties of hardened concrete such as compressive strength, split tensile strength and flexural strength. Thus an attempt has been made to develop a formulation of an economically feasible and environment friendly self-compacting concrete.   

scholarly journals Lightweight self-compacting concrete with sintered fly-ash aggregate

2018 ◽  
Vol 27 (3) ◽  
pp. 328-337
Author(s):  
Dorota Małaszkiewicz ◽  
Daniel Jastrzębski
Keyword(s):  
Fly Ash ◽  
Fresh Concrete ◽  
Strength Loss ◽  
Partial Replacement ◽  
Hardened Concrete ◽  
Self Compacting Concrete ◽  
Natural Sand ◽  
Concrete Properties ◽  
Slump Flow ◽  
Passing Ability

The article presents the results of research assessing the possibility of making LWSCC from the locally produced sintered fly ash aggregate CERTYD. Two methods of preliminary LWA preparation were applied: pre-soaking with water and coating with a film of cement paste. The following properties of fresh LWSCC were evaluated: slump-flow, time T500 and passing ability using L-Box. Partial replacement of natural sand by fine LW sand (0/0.5 mm) improved filling and passing abilities of fresh concrete, reduced slightly the bulk density, but it resulted in compressive strength loss by 12-18%. In terms of both fresh and hardened concrete properties it is more favorable to use only fine LW sand as natural sand replacement. Considering fresh concrete properties paste impregnation of LW aggregate is more efficient than saturation with water.

scholarly journals Effect of Electrically Precipitated Fly Ash(EPFA) On Fresh and Hardened Properties of High Strength Self- Compacting Concrete

2021 ◽  
Author(s):  
Sambangi Arunchaitanya ◽  
E. Arunakanthi
Keyword(s):  
Fly Ash ◽  
Heterogeneous Material ◽  
High Strength ◽  
Partial Replacement ◽  
Self Compacting Concrete ◽  
Split Tensile Strength ◽  
Conventional Concrete ◽  
Filling Ability ◽  
Chemical Admixture ◽  
Passing Ability

Abstract Concrete is the most common heterogeneous material in the construction industry. Admixtures have gained wide use in modern constructions, which are having congested reinforcement with ambitious casting conditions. For such applications, self-compacting concrete (SCC) is the only special concrete, which can have high cohesiveness and fluidity. This paper shows the study on the fresh properties, compressive, flexural and split tensile strength in addition to RCPT, sorptivity of SCC with partially replaced electrically precipitated fly ash (EPFA) from 0 to 30% at 5% interval in cement and polycarboxylate ether-based superplasticizer as a chemical admixture. Compared the results with conventional SCC mix the fresh concrete performance was studied through the measurement of passing ability, filling ability and flowing ability by using L-Box, U-Box, V-Funnel and slump flow. The results showed that 20% EPFA as partial replacement to SCC gives better results than the conventional concrete, thereby leading to economical profits as well as ecological benefits.

Rice Husk Ash as Fine Aggregate Sustainable Material for Strength Enhancement of Conventional and Self Compacting Concrete

2016 ◽  
Vol 692 ◽  
pp. 94-103
Author(s):  
S.S. Samantaray ◽  
K.C. Panda ◽  
M. Mishra
Keyword(s):  
Rice Husk ◽  
Rice Husk Ash ◽  
Fresh Concrete ◽  
Partial Replacement ◽  
Hardened Concrete ◽  
Fine Aggregate ◽  
Self Compacting Concrete ◽  
Strength Enhancement ◽  
Slump Flow ◽  
Concrete Property

Rice husk ash (RHA) is a by-product of the rice milling industry. Near about 20 million tonnes of RHA is produced annually which creates environmental pollution. Utilization of RHA as a supplementary cementitious material adds sustainability to concrete by reducing CO2 emission of cement production. But, the percentage of utilization of RHA is very less. This paper presents the results of an experimental investigation to study the effects of partial replacement of fine aggregate with RHA on mechanical properties of conventional and self-compacting concrete (SCC). The fine aggregate is replaced by RHA in conventional concrete (CC) with six different percentage by weight such as 0%, 10%, 20%, 30%, 40% and 50% having w/c ratio 0.375 with variation of super plasticiser dose, whereas in SCC the replacement of fine aggregate by RHA is 0%, 10%, 20%, 30%, 40%. The design mix for CC is targeted for M30 grade concrete. The fresh concrete test of SCC is conducted by using slump flow, T500, J-ring, L-box, U-box and V-funnel to know the filling ability, flow ability and passing ability of SCC. As fresh concrete property concerned, the result indicates that the slump flow value satisfied the EFNARC 2005 guidelines upto 30% replacement of fine aggregate with RHA whereas 40% replacement did not satisfy the guideline. As hardened concrete property concerned, the compressive strength, split-tensile strength and flexural strength of CC and SCC are determined at 7, 28 and 90 days. The test result indicates that upto 30% replacement of fine aggregate with RHA enhances the strength in CC whereas the strength enhancement in SCC upto 20% replacement.

Experimental Study on the Workability of Self-Compacting Granite and Unwashed Gravel Concrete

2017 ◽  
Vol 31 ◽  
pp. 69-76
Author(s):  
Gideon O. Bamigboye ◽  
David O. Olukanni ◽  
Adeola A. Adedeji ◽  
Kayode J. Jolayemi
Keyword(s):  
Experimental Study ◽  
Coarse Aggregate ◽  
Mix Design ◽  
Fine Aggregate ◽  
Self Compacting Concrete ◽  
Consistency Test ◽  
Coarse Aggregates ◽  
Slump Flow ◽  
Filling Ability ◽  
Passing Ability

This study deals mainly with the mix proportions using granite and unwashed gravel as coarse aggregate for self-compacting concrete (SCC) and its workability, by considering the water absorption of unwashed gravel aggregate. Mix proportions for SCC were designed with constant cement and fine aggregate while coarse aggregates content of granite-unwashed gravel combination were varied in the proportion 100%, 90%/10%, 80%/20%, 70%/30%, 60%/40%, 50% /50%, represented by SCC1, SCC2, SCC3, SCC4, SCC5 and SCC6. 100% granite (SCC1) serves as the control. The workability of the samples was quantitatively evaluated by slump flow, T500, L-box, V- funnel and sieve segregation tests. Based on the experimental results, a detailed analysis was conducted. It was found that granite and unwashed gravel with SCC1, SCC2 and SCC3 according to EFNARC (2002) standard have good deformability, fluidity and filling ability, which all passed consistency test. SCC1, SCC2 and SCC3 have good passing ability while all mixes were in the limit prescribed by EFNARC (2002). It can be concluded that the mix design for varying granite-unwashed gravel combination for SCC presented in this study satisfy various requirements for workability hence, this can be adopted for practical concrete structures.

scholarly journals Enhancing the Strength Properties of Self-Compacting Concrete with Fiber Reinforcement

2019 ◽  
Vol 6 (5) ◽  
pp. 5-8
Keyword(s):  
Tensile Strength ◽  
Flexural Strength ◽  
Steel Fiber ◽  
Strength Properties ◽  
Self Compacting Concrete ◽  
Split Tensile Strength ◽  
Filling Ability ◽  
Hardened Properties ◽  
Passing Ability ◽  
New Generation

Self-compacting concrete is one that is flow able by its own. The SCC is suitable for placing in dense reinforcement structures. It is a new generation performance concrete known for its outstanding deformity and high resistance to bleeding. The concrete is frail material which is comparatively tough in compression but fragile in tension. The tensile strength of concrete is improved by addition of fibers in the concrete mix. The addition of such fibers has negative consequence on the workability of concrete. Various types of fibers are used in concrete to provide the higher flexural strength and better tensile strength. In this research steel fibers are used to provide a better strength as compared with normal reinforced concrete. Steel fiber in SCC significantly improves its flexural strength, improved tensile properties, reduce cracking and improve durability. In this research the investigation of steel fiber in SCC to enhance the strength properties of SCC. The objective of the study was to determine different properties of SCC with steel fiber at different proportions. The experimental investigation was took on the freshly mixed and hardened properties of SCC of various mix with the different variations of fiber 0.25%, 0.50%, 0.75% and 1% by using Viscosity Modified Agent (VMA) 1.5% of cement material by using M25 grade of concrete. In this research a series of tests were carried out for workability like slump cone test, U funnel, V funnel, L box test on SCC to check freshly mix properties like flow-ability, filling-ability, and passing-ability and hardened properties like compressive strength, split-tensile strength and flexural strength respectively and test were conducted at the age of 7Days, 14Days, 28Days on the SCC. The advantage of adding steel fiber in self-compacting concrete is that it enhances its overall strength.

Utilization of Iron Filings as Partial Replacements for Sand in Self-Compacting Concrete

2021 ◽  
Vol 47 (3) ◽  
pp. 906-916
Author(s):  
Simon O. Olawale ◽  
Mutiu A. Kareem ◽  
Habeeb T. Muritala ◽  
Abiola U. Adebanjo ◽  
Olusegun O. Alabi ◽  
...  
Keyword(s):  
Steel Production ◽  
Strength Properties ◽  
Self Compacting Concrete ◽  
River Sand ◽  
Slump Flow ◽  
Filling Ability ◽  
Fine Aggregates ◽  
Concrete Production ◽  
Fresh State ◽  
Passing Ability

The use of industrial by-products in concrete production is part of concerted efforts on the reduction of environmental hazards attributed to the mining of conventional aggregates. Consideration of iron filings (IF), a by-product from steel production process, is an environmentally friendly way of its disposal which is expected to yield economic concrete production. Six self-compacting concrete (SCC) mixes were made by partially substituting river sand with IF at 5%, 10%, 15%, and 20% and the mix without IF (0% IF) served as the control. The water-binder (w/b) ratio of 0.45 was adopted for all mixes. The fresh state properties of SCC evaluated include: filling ability determined using slump flow and T500 mm slump flow tests, passing ability determined using L-box test and segregation resistance determined using V-funnel tests. The strength properties of SCC considered were compressive and tensile strengths. All the SCC mixes met the fresh properties requirements for filling capacity, passing ability, and segregation resistance. The 28-day compressive and tensile strengths of SCC increased by 3.46% and 8.08%, respectively, with IF replacement up to 15% compared to the control SCC. However, there was reduction in compressive and tensile strengths of SCC with IF replacement beyond 15%. The strength properties of SCC is considerably enhanced with the addition of up to 15% IF. Hence, the optimum content of 15% IF is considered suitable as a replacement for river sand in SCC. Keywords: Self-compacting concrete; iron filings; fine aggregates; filling ability; passing ability

scholarly journals Self-Compacting Concrete Properties of Recycled Coarse Aggregate

2021 ◽  
Keyword(s):  
Coarse Aggregate ◽  
Negative Impact ◽  
Experimental Program ◽  
Hardened Concrete ◽  
Self Compacting Concrete ◽  
Chloride Permeability ◽  
Recycled Coarse Aggregate ◽  
Filling Ability ◽  
Passing Ability ◽  
Building Demolition

Abstract. Self-compacting concrete, which is characterized by its capacity to flow, can also consolidate under its weight. Hardened concrete from concrete building demolition can be used to partially replace natural coarse aggregate in self-compacting concrete. The current study compares the properties of self-compacting concrete with 0 percent, 25%, 50%, 75%, and 100% substitution of recycled coarse aggregate in the fresh and hardened states. The evolution of passing ability properties using the L-box test, filling ability properties using the slump cone test, and segregation properties using the V-funnel test are also included. Compression, tension, and flexural strength are all checked for hardened properties. Rapid chloride permeability and sorptivity tests are used to assess durability. The experimental program revealed that at RCA utilization levels of 25% to 50%, little to no negative impact on power, workability, or durability properties was observed.

scholarly journals Mechanical Properties of Self-Compacting Geopolymer Concrete Using Fly Ash and GGBS

2018 ◽  
Vol 7 (1) ◽  
pp. 19-23
Author(s):  
S. Thirupathiraj .
Keyword(s):  
Blast Furnace ◽  
Fly Ash ◽  
Blast Furnace Slag ◽  
Geopolymer Concrete ◽  
Cement Concrete ◽  
Self Compacting Concrete ◽  
Split Tensile Strength ◽  
Granulated Blast Furnace Slag ◽  
Concrete Mix ◽  
Furnace Slag

Cement is the core content for the concrete mix. Manufacturing of cement causes CO2 emission which leads to the pollution, health and environmental problems like global warming to control over the adverse effect we can prefer geopolymer concrete which is not a cement concrete. Factory wastes such as fly ash, ground granulated blast furnace slag (GGBS), silica fume and Metakaolin can be used as alternate for cement. This study mainly focus on the ratio of fly ash and ground granulated blast furnace slag (GGBS) for optimum levels which nearly matches the cement concrete properties. This study involves the various tests like slump flow, compression testing, split tensile strength and flexural strength of self-compacting geopolymer concrete. Self-compacting concrete is a highly flowable concrete that spreads into the form without the need of mechanical vibration. Self-compacting concrete is a non-segregating concrete that is placed by means of its own weight. The advantages include improved constructability, Labour reduction, bond to steel, Flow into complex forms, reduced equipment wear etc. The aim of this study is to achieve an optimum self-compacting concrete geopolymer concrete mix proportion using fly ash and ground granulated blast furnace slag (GGBS). Then the study will be further extended by investigating the durability properties of self-compacting geopolymer concrete.

scholarly journals Effects of Induction-Furnace Slag on Strength Properties of Self-Compacting Concrete

2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Oluwaseun Mark ◽  
Anthony Ede ◽  
Chinwuba Arum ◽  
Solomon Oyebisi
Keyword(s):  
Induction Furnace ◽  
Strength Properties ◽  
Fresh Properties ◽  
Empirical Correlations ◽  
Self Compacting Concrete ◽  
X Ray ◽  
Slump Flow ◽  
Filling Ability ◽  
Passing Ability ◽  
Furnace Slag

Abstract Indiscriminate waste disposal poses a severe environmental challenge globally. Recycling of industrial wastes for concrete production is currently the utmost effective way of managing wastes for a cleaner environment and sustainable products. This study investigates the strength characteristics of self-compacting concrete (SCC) containing induction furnace slag (IFS) as a supplementary cementitious material (SCM). The materials utilized include 42.5R Portland cement, induction furnace slag as an SCM ranging from 0 to 50 % by cement weight at 10 % interval, river sand, granite, water and superplasticizer. The fresh properties were tested for filling ability, passing ability and segregation resistance, the strength characteristics measured include compressive strength, splitting tensile strength, flexural strength and Schmidt/rebound number. The oxide compositions and microstructural analysis of SCC were investigated using x-ray fluorescence analyser (XRF) and scanning electron microscopy equipped with energy-dispersive x-ray spectroscopy (SEM-EDS), respectively. Empirical correlations were statistically analyzed using MS-Excel tool. The filling ability characteristic was determined via both the slump flow test and the T50cm slump flow time test. Moreover, the passing ability characteristic was determined using L-Box test. The segregation resistance characteristic was determined using V-funnel at T5minutes test. The results of the fresh properties showed a reduction in the slump flow with increasing IFS content. On the other hand, the T50cm slump flow increased with increasing IFS content. Furthermore, the L-Box decreased with higher IFS content. On the contrary, the V-funnel at T5minutes increased considerably with greater IFS content. The strength test results revealed that the strength properties increased to 20 % IFS, with a value of 66.79 N/mm2 compressive strength at 56 days, giving a rise of 12.61 % over the control. The SCC microstructural examinations revealed the amorphous and better interface structures with increasing IFS content in the mix. The empirical correlations revealed that linear relationships exist among the measured responses (fresh and strength properties). Ultimately, IFS could be utilized as a sustainable material in producing self-compacting concrete.

scholarly journals Effect of Recycled Concrete Waste Aggregate on the Fresh State Properties of Self Compacting Concrete

2019 ◽  
Vol 8 (6) ◽  
pp. 1070-1073
Keyword(s):  
Coarse Aggregate ◽  
Recycled Concrete ◽  
Mineral Admixture ◽  
Self Compacting Concrete ◽  
State Tests ◽  
Slump Flow ◽  
Filling Ability ◽  
Fresh State ◽  
Passing Ability

In this investigation an attempt is made to replace coarse aggregate partially or fully by recycled concrete waste aggregates and the fresh state properties of modified SCC (Self Compacting Concrete) was elaborated by conducting slump flow, V-funnel, L-Box and J-ring tests. The properties such as filling ability, passing ability, segregation, bleeding and stability of the modified SCC were determined by using the fresh state tests. The results of this experiment revealed that it is possible to modify SCC by partially or fully replacing the coarse aggregate by RCWA. The optimum mix also determined by varying RCWA and mineral admixture content in SCC.

Sign in / Sign up

Export Citation Format

Share Document