scholarly journals Comparing the environmental impacts of ethyl biodiesel production from soybean oil and beef tallow through lca for brazilian conditions

2017 ◽  
Vol 8 (4) ◽  
pp. 1285 ◽  
Author(s):  
Rafael Alves Esteves ◽  
Roberto Guimarães Pereira
Keyword(s):  
Land Use ◽  
Soybean Oil ◽  
Production Process ◽  
Environmental Impacts ◽  
Beef Tallow ◽  
Biodiesel Production ◽  
Environmental Damage ◽  
Human Toxicity ◽  
Freshwater Ecotoxicity ◽  
Terrestrial Ecotoxicity

The present paper sought compare the environmental impacts throughout the life cycle of biodiesel production obtained from the two raw materials most used in Brazil (soybean oil and beef tallow) through the process ethyl transesterification in an alkaline medium. The reference flow adopted for the work was the generation of power supplied 1GJ from the produced biodiesel. The data used in the inventory life cycle were calculated based on similar scientific papers. The method of assessment of environmental impacts chosen was the CML 2001 modified. Altogether, it were analyzed nine categories of environmental impacts for both processes (abiotic depletion (kg Sb eq), land use (m2a), global warming (kg CO2 eq), ozone layer depletion (kg CFC-11 eq), human toxicity (kg 1,4-DB eq), freshwater ecotoxicity (kg 1,4-DB eq), terrestrial ecotoxicity (kg 1,4-DB eq), acidification (kg SO2 eq) and eutrophication (kg PO43- eq)). The results of evaluation of environmental impacts show that the biodiesel production process from soybean oil presents major environmental damage in seven categories of analyzed impacts (destruction of abiotic resources, destruction of the ozone layer, human toxicity, freshwater ecotoxicity, terrestrial ecotoxicity, acidification and eutrophication). The production process of biodiesel from tallow presents major environmental damage in two categories of impacts analyzed (land use and global warming). However, the results show that the absolute values of environmental damage caused by impacts of the production process using beef tallow are much more aggressive.

scholarly journals Human Health and Ecosystem Quality Benefits with Life Cycle Assessment Due to Fungicides Elimination in Agriculture

2022 ◽  
Vol 14 (2) ◽  
pp. 846
Author(s):  
Georgios Archimidis Tsalidis
Keyword(s):  
Life Cycle Assessment ◽  
Human Health ◽  
Fruits And Vegetables ◽  
Human Toxicity ◽  
Ecosystem Quality ◽  
Freshwater Ecotoxicity ◽  
Terrestrial Ecotoxicity ◽  
Expected Benefits ◽  
European Citizen ◽  
Freshwater Eutrophication

Industrial agriculture results in environmental burdens due to the overuse of fertilizers and pesticides. Fungicides is a class of pesticides whose application contributes (among others) to human toxicity and ecotoxicity. The European Union aims to increase organic agriculture. For this reason, this work aims to analyze climate change, freshwater ecotoxicity, terrestrial ecotoxicity, human toxicity, (terrestrial) acidification, and freshwater eutrophication impacts of fungicides and calculate expected benefits to human health (per European citizen) and ecosystem quality (terrestrial) with life cycle assessment (LCA) during crop production. The Scopus database was searched for LCA studies that considered the application of fungicides to specific crops. The analysis shows how many systemic and contact fungicides were considered by LCA studies and what was the applied dosage. Furthermore, it shows that fungicides highly contribute to freshwater ecotoxicity, terrestrial ecotoxicity, human toxicity, and freshwater eutrophication for fruits and vegetables, but to a low extent compared to all considered environmental impacts in the case of cereals and rapeseed. Expected benefits to human health and ecosystem quality after fungicides elimination are greater for fruits and vegetables, ranging between 0 to 47 min per European citizen in a year and 0 to 90 species per year, respectively.

scholarly journals Life Cycle Assessment of Thai Hom Mali Rice to Support the Policy Decision on Organic Farming Area Expansion

2020 ◽  
Vol 12 (15) ◽  
pp. 6003
Author(s):  
Rattanawan Mungkung ◽  
Saruda Sitthikitpanya ◽  
Sarocha Dangsiri ◽  
Shabbir H. Gheewala
Keyword(s):  
Life Cycle ◽  
Environmental Impacts ◽  
National Policy ◽  
Policy Decision ◽  
Rice Farming ◽  
Freshwater Ecotoxicity ◽  
Organic Rice ◽  
The North ◽  
Terrestrial Ecotoxicity ◽  
Freshwater Eutrophication

Thailand has a strategic national policy to increase organic rice farming. This study firstly applied Life Cycle Assessment for evaluating the quantitative environmental impacts at the regional and national levels to facilitate the national policy decision on the expansion of organic rice cultivation areas. The impact categories of interest included global warming, terrestrial acidification, freshwater eutrophication, terrestrial ecotoxicity, and freshwater ecotoxicity, and the life cycle impact assessment method applied was ReCiPe. The results showed that the life cycle environmental impacts from organic rice cultivation in the nine provinces in the North were lower than those from the 12 provinces in the Northeast, due mainly to the higher yields and lower use of fertilizers in the former. The methane emissions in the North (11,147 kg CO2e/ha) were similar to those in the Northeast (11,378 kg CO2e/ha). However, nitrous oxide emissions in the Northeast were higher than in the North due to the higher amounts of fertilizer used. If Thailand expands the rice farming by 50% in the North and by 50% in the Northeast, the greenhouse gas emissions could be reduced from 11,400 to 11,100 kg CO2e/ha, but the impacts of terrestrial acidification, freshwater eutrophication, terrestrial ecotoxicity, and freshwater ecotoxicity could be increased by 0.0257 kg PO4e (95%), 0.508 kg 1,4-DBe (53%), and 33.1 kg 1,4-DBe (17%), respectively. To reduce the global warming as well as other environmental impacts, Thailand should expand rice farming areas to the North. This information could be useful for supporting the policy decisions on which areas the organic rice farming should be expanded in to minimize the potential life cycle environmental impacts.

scholarly journals Solvent Assisted Biodiesel Production by Co-processing Beef Tallow and Soybean Oil Over Calcium Catalysts

2019 ◽  
Vol 11 (11) ◽  
pp. 6249-6259 ◽  
Author(s):  
Ana Paula Soares Dias ◽  
Marta Ramos ◽  
Mónica Catarino ◽  
Jaime Puna ◽  
João Gomes
Keyword(s):  
Soybean Oil ◽  
Beef Tallow ◽  
Biodiesel Production ◽  
Calcium Catalysts

USE OF NORTHERN ECOTYPE SOYBEANS FOR BIOFUEL PRODUCTION

2020 ◽  
pp. 22-30
Author(s):  
SERGEY N. DEVYANIN ◽  
◽  
VLADIMIR A. MARKOV ◽  
ALEKSANDR G. LEVSHIN ◽  
TAMARA P. KOBOZEVA ◽  
...  
Keyword(s):  
Diesel Engine ◽  
Soybean Oil ◽  
Diesel Fuel ◽  
Experimental Studies ◽  
Motor Fuel ◽  
Biodiesel Production ◽  
Biofuel Production ◽  
Exhaust Gases ◽  
Oil Productivity ◽  
Toxic Components

The paper presents the results of long-term research on the oil productivity and chemical composition of soybean oil of the Northern ecotype varieties in the Central Non-Black Earth Region. The authors consider its possible use for biodiesel production. Experiments on growing soybeans were carried out on the experimental fi eld of Russian State Agrarian University –Moscow Timiryazev Agricultural Academy (2008-2019) on recognized ultra-early ripening varieties of the Northern ecotype Mageva, Svetlaya, Okskaya (ripeness group 000). Tests were set and the research results were analyzed using standard approved methods. It has been shown that in conditions of high latitudes (57°N), limited thermal resources of the Non-Chernozem zone of Russia (the sum of active temperatures of the growing season not exceeding 2000°С), the yield and productivity of soybeans depend on the variety and moisture supply. Over the years, the average yield of soybeans amounted to 1.94 … 2.62 t/ha, oil productivity – 388 … 544 kg/ha, oil content – 19…20%, the content of oleic and linoleic fatty acids in oil – 60%, and their output from seeds harvested – 300 kg/ha. It has been established that as soybean oil and diesel fuel have similar properties,they can be mixed by conventional methods in any proportions and form stable blends that can be stored for a long time. Experimental studies on the use of soybean oil for biodiesel production were carried out on a D-245 diesel engine (4 ChN11/12.5). The concentrations of toxic components (CO, CHx, and NOx) in the diesel exhaust gases were determined using the SAE-7532 gas analyzer. The smoke content of the exhaust gases was measured with an MK-3 Hartridge opacimeter. It has been experimentally established that the transfer of a diesel engine from diesel fuel to a blend of 80% diesel fuel and 20% lubrication oil leads to a change in the integral emissions per test cycle: nitrogen oxides in 0.81 times, carbon monoxide in 0.89 times and unburned hydrocarbons in 0.91 times, i.e. when biodiesel as used as a motor fuel in a serial diesel engine, emissions of all gaseous toxic components are reduced. The study has confi rmed the expediency of using soybeans of the Northern ecotype for biofuel production.

Deferring Crisis

2018 ◽  
Author(s):  
Erin Stewart Mauldin
Keyword(s):  
Land Use ◽  
Environmental Impacts ◽  
Shifting Cultivation ◽  
Crop Production ◽  
Animal Husbandry ◽  
Antebellum South ◽  
Westward Expansion ◽  
The Cost ◽  
Land Use Practices ◽  
Ecological Regime

This chapter explores the ecological regime of slavery and the land-use practices employed by farmers across the antebellum South. Despite the diverse ecologies and crop regimes of the region, most southern farmers employed a set of extensive agricultural techniques that kept the cost of farming down and helped circumvent natural limits on crop production and stock-raising. The use of shifting cultivation, free-range animal husbandry, and slaves to perform erosion control masked the environmental impacts of farmers’ actions, at least temporarily. Debates over westward expansion during the sectional crisis of the 1850s were not just about the extension of slavery, they also reflected practical concerns regarding access to new lands and fresh soil. Both were necessary for the continued profitability of farming in the South.

scholarly journals End-of-Life Alternatives of Glass Reinforced Polyester Boat Hulls Compared by LCA

2018 ◽  
Vol 27 (4) ◽  
pp. 096369351802700 ◽  
Author(s):  
Mehmet Önal ◽  
Gökdeniz Neşer
Keyword(s):  
End Of Life ◽  
Environmental Impacts ◽  
Raw Materials ◽  
Weight Ratio ◽  
Cost Effective ◽  
Raw Material ◽  
Photochemical Oxidation ◽  
Human Toxicity ◽  
Vacuum Infusion ◽  
Infusion Method

Glass reinforced polyester (GRP), as a thermoset polymer composites, dominates boat building industry with its several advantages such as high strength/weight ratio, cohesiveness, good resistance to environment. However, proper recovering and recycling of GRP boats is became a current environmental requirement that should be met by the related industry. In this study, to propose in a cost effective and environmentally friendly way, Life Cycle Assessment (LCA) has been carried out for six scenarios include two moulding methods (namely Hand Lay-up Method, HLM and Vacuum Infusion Method, VIM) and three End-of-Life (EoL) alternatives(namely Extruding, Incineration and Landfill) for a recreational boat's GRP hulls. A case study from raw materials purchasing phase to disposal/recycling stages has been established taking 11 m length GRP boat hull as the functional unit. Analysis show that in the production phase, the impacts are mainly due to the use of energy (electricity), transport and raw material manufacture. Largest differences between the methods considered (HLM and VIM) can be observed in the factors of marine aquatic ecotoxicity and eutrophication while the closest ones are abiotic depletion, ozon layer depletion and photochemical oxidation. The environmental impact of VIM is much higher than HLM due to its higher energy consumption while vacuum infusion method has lower risk than hand lay-up method in terms of occupational health by using less raw material (resin) in a closed mold. In the comparison of the three EoL techniques, the mechanical way of recycling (granule extruding) shows better environmental impacts except terrestrial ecotoxicity, photochemical oxidation and acidification. Among the EoL alternatives, landfill has the highest environmental impacts except ‘global warming potential’ and ‘human toxicity’ which are the highest in extrusion. The main cause of the impacts of landfill is the transportation needs between the EoL boats and the licenced landfill site. Although it has the higher impact on human toxicity, incineration is the second cleaner alternative of EoL techniques considered in this study. In fact that the similar trend has been observed both in production and EoL phases of the boat. It is obvious that using much more renewable energy mix and greener transportation alternative can reduce the overall impact of the all phases considerably.

Carbon footprint and water footprint assessment of virgin and recycled polyester textiles

2021 ◽  
pp. 004051752110062
Author(s):  
Weiran Qian ◽  
Xiang Ji ◽  
Pinghua Xu ◽  
Laili Wang
Keyword(s):  
Production Process ◽  
Environmental Impacts ◽  
Carbon Footprint ◽  
Water Scarcity ◽  
Water Footprint ◽  
Oxygen Demand ◽  
Polyester Fabric ◽  
Total Carbon ◽  
Fabric Production ◽  
Water Eutrophication

Recycled polyester textile fibers stemming from waste polyester material have been applied in the textile industry in recent years. However, there are few studies focusing on the evaluation and comparison of the environmental impacts caused by the production of virgin polyester textiles and recycled polyester textiles. In this study, the carbon footprint and water footprint of virgin polyester textiles and recycled polyester textiles were calculated and compared. The results showed that the carbon footprint of the virgin polyester textiles production was 119.59 kgCO2/100 kg. Terephthalic acid production process occupied the largest proportion, accounting for 45.83%, followed by polyester fabric production process, ethylene production process, paraxylene production process, ethylene glycol production process and polyester fiber production process. The total carbon footprint of waste polyester recycling was 1154.15 kgCO2/100 kg, approximately ten times that of virgin polyester textiles production. As for the water footprint, it showed that virgin polyester fabric production and recycled polyester fabric production both had great impact on water eutrophication and water scarcity. Chemical oxygen demand caused the largest water eutrophication footprint, followed by ammonia-nitrogen and five-day biochemical oxygen demand. The water scarcity footprint of virgin polyester fabric production and recycled polyester fabric production was 5.98 m3 H2Oeq/100 kg and 1.90 m3 H2Oeq/100 kg, respectively. The comprehensive evaluation of carbon footprint and water footprint with the life cycle assessment polygon method indicated that the polyester fabric production process exhibited greater environmental impacts both for virgin polyester and recycled polyester.

Sign in / Sign up

Export Citation Format

Share Document