Deferoxamine–paper for iron(III) and vanadium(V) sensing

2015 ◽  
Vol 69 (8) ◽  
Author(s):  
Giancarla Alberti ◽  
Federico Quattrini ◽  
Roberta Colleoni ◽  
Valeria M. Nurchi ◽  
Raffaela Biesuz
Keyword(s):  
Solid Phase ◽  
Solid Support ◽  
Complete Characterization ◽  
Good Sensitivity ◽  
Real Samples ◽  
Colorimetric Measurements ◽  
Colored Complexes ◽  
Pre Treatment ◽  
Treatment Procedures

AbstractThe development of a sensor based on the functionalization of common filter paper with deferoxamine (DFO) is proposed with the prospect to produce a solid phase for iron(III) and vanadium(V) sensing. The main features of this sensor are the simplicity of operation, good sensitivity and feasible applicability to real samples without the need of pre-treatment procedures. DFO was selected not only for it is easily anchored to the solid support, but also because it forms colored complexes with iron(III) and vanadium(V); hence, the developing of a simple colorimetric sensor can be considered. In particular, an innovative and economic way to perform colorimetric measurements using a desktop scanner is described. A complete characterization of the functionalized material is also reported.

scholarly journals Implications of sample treatment on characterization of the riverine environmental metabolome

2021 ◽  
Author(s):  
Amelia R Nelson ◽  
Jason Toyoda ◽  
Rosalie K Chu ◽  
Nikola Tolic ◽  
Vanessa Garayburu-Caruso ◽  
...  
Keyword(s):  
Organic Matter ◽  
Natural Organic Matter ◽  
High Resolution Mass Spectrometry ◽  
Solid Phase ◽  
Sample Treatment ◽  
East River ◽  
Ionization Mode ◽  
Single Method ◽  
Pre Treatment

High-resolution mass spectrometry techniques are widely used in the environmental sciences to characterize natural organic matter and, when utilizing these instruments, researchers must make multiple decisions regarding sample pre-treatment and the instrument ionization mode. To identify how these choices alter organic matter characterization and resulting conclusions, we analyzed a collection of 17 riverine samples from East River, CO (USA) under four PPL-based Solid Phase Extraction (SPE) treatment and electrospray ionization polarity (e.g., positive and negative) combinations: SPE (+), SPE (-), non-SPE (-), and non-SPE (+). The greatest number of formula assignments were achieved with SPE-treated samples due to the removal of compounds that could interfere with ionization. Furthermore, the SPE (-) treatment captured the most formulas across the widest chemical compound diversity. In addition to a reduced number of assigned formulas, the non-SPE datasets resulted in altered thermodynamic interpretations that could cascade into incomplete assumptions about the availability of organic matter pools for microbial heterotrophic respiration. Thus, we infer that the SPE (-) treatment is the best single method for characterizing environmental organic matter pools unless the focus is on lipid-like compounds, in which case we recommend a combination of SPE (-) and SPE (+) to adequately characterize these molecules.

scholarly journals Characterization of a monoclonal antibody to bovine xanthine oxidase

1984 ◽  
Vol 219 (3) ◽  
pp. 917-925 ◽  
Author(s):  
C S Kaetzel ◽  
I H Mather ◽  
G Bruder ◽  
P J Madara
Keyword(s):  
Monoclonal Antibody ◽  
Xanthine Oxidase ◽  
Cell Line ◽  
Solid Phase ◽  
Solid Support ◽  
Plastic Plate ◽  
Solid Phase Immunoassay ◽  
Potential Problems

The isolation of a hybridoma cell line, C-41, secreting monoclonal antibody to bovine xanthine oxidase (EC 1.2.3.2), is described. The specificity of this antibody was determined by solid-phase immunoassay, immunoblotting procedures, affinity chromatography, immunoelectrophoresis and precipitation techniques. The results are compared with those obtained in similar specificity studies on a previously described monoclonal antibody secreted by hybridoma cell line A-94 [Mather, Nace, Johnson & Goldsby (1980) Biochem. J. 188, 925-928]. This latter antibody appears to bind to xanthine oxidase only when the enzyme is immobilized on a solid support such as a plastic plate or nitrocellulose paper. Potential problems in the determination of the specificity of monoclonal antibodies, especially towards membrane proteins of unknown biological activity, are discussed.

Application of solid-phase immune electron microscopy to study physical and stability characteristics of enterically transmitted non-a, non-b hepatitis virus

1988 ◽  
Vol 46 ◽  
pp. 80-81
Author(s):  
Charles D. Humphrey ◽  
E. H. Cook ◽  
Karen A. McCaustland ◽  
Daniel W. Bradley
Keyword(s):  
Electron Microscopy ◽  
Hepatitis A ◽  
Hepatitis A Virus ◽  
Solid Phase ◽  
Etiologic Agent ◽  
World Health ◽  
Health Concern ◽  
Morphological Identification ◽  
Immune Electron Microscopy

Enterically transmitted non-A, non-B hepatitis (ET-NANBH) is a type of hepatitis which is increasingly becoming a significant world health concern. As with hepatitis A virus (HAV), spread is by the fecal-oral mode of transmission. Until recently, the etiologic agent had not been isolated and identified. We have succeeded in the isolation and preliminary characterization of this virus and demonstrating that this agent can cause hepatic disease and seroconversion in experimental primates. Our characterization of this virus was facilitated by immune (IEM) and solid phase immune electron microscopic (SPIEM) methodologies.Many immune electron microscopy methodologies have been used for morphological identification and characterization of viruses. We have previously reported a highly effective solid phase immune electron microscopy procedure which facilitated identification of hepatitis A virus (HAV) in crude cell culture extracts. More recently we have reported utilization of the method for identification of an etiologic agent responsible for (ET-NANBH).

TEM characterization of Au/Polysilicon interactions

1990 ◽  
Vol 48 (4) ◽  
pp. 650-651
Author(s):  
N. David Theodore ◽  
Leslie H. Allen ◽  
C. Barry Carter ◽  
James W. Mayer
Keyword(s):  
Solid Phase ◽  
Single Crystal Silicon ◽  
Chemical Vapor ◽  
Electrical Contacts ◽  
Silicon Substrates ◽  
Crystal Silicon ◽  
Transmission Electron ◽  
Polysilicon Films ◽  
The Stability

Metal/polysilicon investigations contribute to an understanding of issues relevant to the stability of electrical contacts in semiconductor devices. These investigations also contribute to an understanding of Si lateral solid-phase epitactic growth. Metals such as Au, Al and Ag form eutectics with Si. reactions in these metal/polysilicon systems lead to the formation of large-grain silicon. Of these systems, the Al/polysilicon system has been most extensively studied. In this study, the behavior upon thermal annealing of Au/polysilicon bilayers is investigated using cross-section transmission electron microscopy (XTEM). The unique feature of this system is that silicon grain-growth occurs at particularly low temperatures ∽300°C).Gold/polysilicon bilayers were fabricated on thermally oxidized single-crystal silicon substrates. Lowpressure chemical vapor deposition (LPCVD) at 620°C was used to obtain 100 to 400 nm polysilicon films. The surface of the polysilicon was cleaned with a buffered hydrofluoric acid solution. Gold was then thermally evaporated onto the samples.

Characterization of Monoclonal Anti-human Factor VII Antibody (B101/B1) that Recognized Three-dimensional Structures near Arg at Position 79 in the First EGF-like Domain

1998 ◽  
Vol 79 (01) ◽  
pp. 104-109 ◽  
Author(s):  
Osamu Takamiya
Keyword(s):  
Monoclonal Antibodies ◽  
Tissue Factor ◽  
Human Factor ◽  
Solid Phase ◽  
Three Dimensional ◽  
Coagulation Factors ◽  
Factor Vii ◽  
Dimensional Structure ◽  
Epidermal Growth

SummaryMurine monoclonal antibodies (designated hVII-B101/B1, hVIIDC2/D4 and hVII-DC6/3D8) directed against human factor VII (FVII) were prepared and characterized, with more extensive characterization of hVII-B101/B1 that did not bind reduced FVIIa. The immunoglobulin of the three monoclonal antibodies consisted of IgG1. These antibodies did not inhibit procoagulant activities of other vitamin K-dependent coagulation factors except FVII and did not cross-react with proteins in the immunoblotting test. hVII-DC2/D4 recognized the light chain after reduction of FVIIa with 2-mercaptoethanol, and hVIIDC6/3D8 the heavy chain. hVII-B101/B1 bound FVII without Ca2+, and possessed stronger affinity for FVII in the presence of Ca2+. The Kd for hVII-B101/B1 to FVII was 1.75 x 10–10 M in the presence of 5 mM CaCl2. The antibody inhibited the binding of FVII to tissue factor in the presence of Ca2+. hVII-B101/B1 also inhibited the activation of FX by the complex of FVIIa and tissue factor in the presence of Ca2+. Furthermore, immunoblotting revealed that hVII-B101/B1 reacted with non-reduced γ-carboxyglutaminic acid (Gla)-domainless-FVII and/or FVIIa. hVII-B101/B1 showed a similar pattern to that of non-reduced proteolytic fragments of FVII by trypsin with hVII-DC2/D4 on immunoblotting test. hVII-B101/B1 reacted differently with the FVII from the dysfunctional FVII variant, FVII Shinjo, which has a substitution of Gln for Arg at residue 79 in the first epidermal growth factor (1st EGF)-like domain (Takamiya O, et al. Haemosta 25, 89-97,1995) compared with normal FVII, when used as a solid phase-antibody for ELISA by the sandwich method. hVII-B101/B1 did not react with a series of short peptide sequences near position 79 in the first EGF-like domain on the solid-phase support for epitope scanning. These results suggested that the specific epitope of the antibody, hVII-B101/B1, was located in the three-dimensional structure near position 79 in the first EGF-like domain of human FVII.

Experimental Characterization of Mechanical Behavior of Cord-Rubber Composites

1982 ◽  
Vol 10 (1) ◽  
pp. 37-54 ◽  
Author(s):  
M. Kumar ◽  
C. W. Bert
Keyword(s):  
Response Characteristic ◽  
Cord Compression ◽  
Complete Characterization ◽  
Strain Response ◽  
Strain Gages ◽  
Experimental Characterization ◽  
Rubber Composites ◽  
Stress Strain ◽  
Strain Data

Abstract Unidirectional cord-rubber specimens in the form of tensile coupons and sandwich beams were used. Using specimens with the cords oriented at 0°, 45°, and 90° to the loading direction and appropriate data reduction, we were able to obtain complete characterization for the in-plane stress-strain response of single-ply, unidirectional cord-rubber composites. All strains were measured by means of liquid mercury strain gages, for which the nonlinear strain response characteristic was obtained by calibration. Stress-strain data were obtained for the cases of both cord tension and cord compression. Materials investigated were aramid-rubber, polyester-rubber, and steel-rubber.

Characterization of CMOS Structures (0.6 µm process) Submitted to HBM and COM ESD Stress Tests

1997 ◽  
Author(s):  
G. Meneghesso ◽  
E. Zanoni ◽  
P. Colombo ◽  
M. Brambilla ◽  
R. Annunziata ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Electrostatic Discharge ◽  
Stress Test ◽  
Complete Characterization ◽  
Stress Tests ◽  
Test Procedures ◽  
Emission Microscopy ◽  
Fast Rise ◽  
Scanning Electron

Abstract In this work, we present new results concerning electrostatic discharge (ESD) robustness of 0.6 μm CMOS structures. Devices have been tested according to both HBM and socketed CDM (sCDM) ESD test procedures. Test structures have been submitted to a complete characterization consisting in: 1) measurement of the tum-on time of the protection structures submitted to pulses with very fast rise times; 2) ESD stress test with the HBM and sCDM models; 3) failure analysis based on emission microscopy (EMMI) and Scanning Electron Microscopy (SEM).

Sign in / Sign up

Export Citation Format

Share Document