TEM characterization of Au/Polysilicon interactions

1990 ◽  
Vol 48 (4) ◽  
pp. 650-651
Author(s):  
N. David Theodore ◽  
Leslie H. Allen ◽  
C. Barry Carter ◽  
James W. Mayer
Keyword(s):  
Solid Phase ◽  
Single Crystal Silicon ◽  
Chemical Vapor ◽  
Electrical Contacts ◽  
Silicon Substrates ◽  
Crystal Silicon ◽  
Transmission Electron ◽  
Polysilicon Films ◽  
The Stability

Metal/polysilicon investigations contribute to an understanding of issues relevant to the stability of electrical contacts in semiconductor devices. These investigations also contribute to an understanding of Si lateral solid-phase epitactic growth. Metals such as Au, Al and Ag form eutectics with Si. reactions in these metal/polysilicon systems lead to the formation of large-grain silicon. Of these systems, the Al/polysilicon system has been most extensively studied. In this study, the behavior upon thermal annealing of Au/polysilicon bilayers is investigated using cross-section transmission electron microscopy (XTEM). The unique feature of this system is that silicon grain-growth occurs at particularly low temperatures ∽300°C).Gold/polysilicon bilayers were fabricated on thermally oxidized single-crystal silicon substrates. Lowpressure chemical vapor deposition (LPCVD) at 620°C was used to obtain 100 to 400 nm polysilicon films. The surface of the polysilicon was cleaned with a buffered hydrofluoric acid solution. Gold was then thermally evaporated onto the samples.

Synthesis and Selected Micro-Mechanical Properties of Titanium Nitride Thin Films by the Pyrolysis of Tetrakis Titanium in Ammonia.

1994 ◽  
Vol 363 ◽  
Author(s):  
Y. W. Bae ◽  
W. Y. Lee ◽  
T. M. Besmann ◽  
P. J. Blau ◽  
L. Riester
Keyword(s):  
Thin Films ◽  
Titanium Nitride ◽  
Electron Spectroscopy ◽  
Single Crystal Silicon ◽  
Chemical Vapor ◽  
Silicon Substrates ◽  
X Ray Diffraction ◽  
Crystal Silicon ◽  
Transmission Electron ◽  
Chemical Vapor Deposited

AbstractThin films of titanium nitride were chemical vapor deposited on (100)-oriented single-crystal silicon substrates from tetrakis (dimethylamino) titanium, Ti((CH3)2N)4, and ammonia gas mixtures in a cold-wall reactor at 623 K and 655 Pa. The films were characterized by Auger electron spectroscopy, X-ray diffraction, and transmission electron spectroscopy. The nano-scale hardness of the film, measured by nanoindentation, was 12.7±0.6 GPa. The average kinetic friction coefficient against unlubricated, type- 440C stainless steel was determined using a computer-controlled friction microprobe to be ∼0.43.

Microwave Activation of Dopants & Solid Phase Epitaxy in Silicon

2007 ◽  
Vol 989 ◽  
Author(s):  
Douglas C. Thompson ◽  
J. Decker ◽  
T. L. Alford ◽  
J. W. Mayer ◽  
N. David Theodore
Keyword(s):  
Single Crystal ◽  
Microwave Heating ◽  
Rutherford Backscattering Spectrometry ◽  
Solid Phase ◽  
Single Crystal Silicon ◽  
Silicon Substrates ◽  
Crystal Silicon ◽  
Cross Sectional ◽  
Transmission Electron ◽  
Microwave System

AbstractMicrowave heating is used to activate solid phase epitaxial re-growth of amorphous silicon layers on single crystal silicon substrates. Layers of single crystal silicon were made amorphous through ion implantation with varying doses of boron or arsenic. Microwave processing occurred inside a 2.45 GHz, 1300 W cavity applicator microwave system for time-durations of 1-120 minutes. Sample temperatures were monitored using optical pyrometery. Rutherford backscattering spectrometry, and cross-sectional transmission electron microscopy were used to monitor crystalline quality in as-implanted and annealed samples. Sheet resistance readings show dopant activation occurring in both boron and arsenic implanted samples. In samples with large doses of arsenic, the defects resulting from vacancies and/or micro cluster precipitates are seen in transmission electron micrographs. Materials properties are used to explain microwave heating of silicon and demonstrate that the damage created in the implantation process serves to enhance microwave absorption.

Micromechanical and tribological characterization of doped single-crystal silicon and polysilicon films for microelectromechanical systems devices

1997 ◽  
Vol 12 (1) ◽  
pp. 54-63 ◽  
Author(s):  
Bharat Bhushan ◽  
Xiaodong Li
Keyword(s):  
Single Crystal ◽  
Microelectromechanical Systems ◽  
Single Crystal Silicon ◽  
Crystal Silicon ◽  
Polysilicon Film ◽  
Type Silicon ◽  
Boron Doped ◽  
Polysilicon Films ◽  
Tribological Characterization

Microelectromechanical systems (MEMS) devices are made of doped single-crystal silicon, LPCVD polysilicon films, and other ceramic films. Very little is understood about tribology and mechanical characterization of these materials on micro- to nanoscales. Micromechanical and tribological characterization of p-type (lightly boron-doped) single-crystal silicon (referred to as “undoped”), p+-type (boron doped) single-crystal silicon, polysilicon bulk, and n+-type (phosphorous doped) LPCVD polysilicon films have been carried out. Hardness, elastic modulus, and scratch resistance of these materials were measured by nanoindentation and microscratching using a nanoindenter. Friction and wear properties were measured using an accelerated ball-on-flat tribometer. It is found that the undoped silicon and polysilicon bulk as well as n+-type polysilicon film exhibit higher hardness and elastic modulus than the p+-type silicon. The polysilicon bulk and n+-type polysilicon film exhibit the lowest friction and highest resistance to scratch and wear followed by the undoped silicon and with the poorest behavior of the p+-type silicon. During scratching, the p+-type silicon deforms like a ductile metal.

FRACTURE CHARACTERISTICS OF DLC ON SILICON USING NANO-INDENTATION AND FEA

2006 ◽  
Vol 20 (25n27) ◽  
pp. 4213-4218 ◽  
Author(s):  
SEUNG BAEK ◽  
CHANG-SUNG SEOK
Keyword(s):  
Fracture Toughness ◽  
Finite Element ◽  
Single Crystal Silicon ◽  
Chemical Vapor ◽  
Diamond Like Carbon ◽  
Silicon Substrates ◽  
Crystal Silicon ◽  
Element Analysis ◽  
Indentation Tests ◽  
Micro Indentation

In this study, using the nano and micro-indentation tests and finite element analysis (FEA), we investigated the fracture behaviors of diamond like carbon (DLC) on silicon in indentation state. Diamond like carbon coating of 3μm and 1.5μm thickness were deposited on polished (100) single crystal silicon substrates by radio frequency plasma assisted chemical vapor deposition (RF-PACVD), respectively. Fracture toughness of DLC films was calculated from the measured lengths of the cracks formed by nano and micro-indentation on each sample. We used various equations such as Lawn's and Liang's equation to calculate the fracture toughness. The effective fracture toughnesses of these DLC films were 1.2 ~1.3 MPam 0.5, calculated by Lawn's and Liang's equations. The true fracture toughness of DLC on silicon, excluding the portion of fracture toughness due to a substrate, was determined to be 4.0~5.1 MPam 0.5. DLC films with crack initiation and propagation were analyzed by finite element method.

Fast Scanned Energy Beam Induced Explosive Crystallization of Ion Implantation Amorphized Poly and Single Crystal Silicon Substrates

1981 ◽  
Vol 4 ◽  
Author(s):  
M. Lerme ◽  
T. Ternisien D'ouville ◽  
Duy-Phach Vu ◽  
A. Perio ◽  
G.A. Rozgonyi ◽  
...  
Keyword(s):  
Single Crystal ◽  
Solid Phase ◽  
Single Crystal Silicon ◽  
Grain Structure ◽  
Silicon Substrates ◽  
Crystal Silicon ◽  
Energy Beam ◽  
Glass Substrates ◽  
Explosive Crystallization ◽  
Si Films

ABSTRACTExplosive crystallisation induced by an electron beam and by a CW Ar+ laser operating in fast scanning mode is observed for the first time on amorphized silicon layers created by implantation on either polycrystalline films deposited on Si02 or single crystal silicon substrates. The grain structure in the explosive crescents is studied by preferential chemical etching in conjunction with Nomarski optical microscopy, SEM and TEM. The results are similar to the so-called solid-phase explosive crystallization previously observed in a-Si films deposited on glass substrates.

Effect of Boron Doping on the C49 TO C54 Phase Transformation in Ti/Si (100) Bilayers

1996 ◽  
Vol 441 ◽  
Author(s):  
M. Libera ◽  
A. Quintero
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Single Crystal ◽  
Single Crystal Silicon ◽  
Interface Roughness ◽  
Ex Situ ◽  
Silicon Substrates ◽  
Crystal Silicon ◽  
Boron Doped ◽  
Transmission Electron

AbstractWe have demonstrated that the formation of C54 TiSi2 on Boron-doped single crystal silicon substrates, under RTA annealing conditions in a Nitrogen ambient, leads to a thicker TiN capping surface layer, thinner silicide layer, higher C49 to C54 transformation temperature and greater interface roughness compared to C54 TiSi 2 formation on undoped single crystal silicon substrates. Titanium films 32 nm thick were deposited on undoped and boron-doped single crystal silicon substrates. The films were annealed at 3 /C/isn nitrogen to final quenching temperatures between 500 °C and 900 TC. Ex-situ four point probe sheet resistance, cross sectional transmission electron microscopy (XTEM), high resolution transmission electron microscopy (HRTEM) and x-ray diffraction (XRD) were used to analyze the resulting TiN on TiSi2 bilayer. The C49 to C54 transformation occurs circa 760 TC and 810 TC for the undoped and boron-doped cases respectively. HRTEM observations reveal a thick 20 nm TIN layer on the C54 TiSi2 film in the boron-doped case but only fine dispersed TiN particles embedded on the top of the silicide in the undoped case. It was observed that the resultant silicide in the boron-doped case was thinner and the TiSi2 /Si(100) interface is rougher. XRD and TEM analysis show that in the boron doped case, there is a preferred C54 (040) orientation compared to a random orientation for the undoped case.

An Epitaxial Si/insulator/Si Structure Prepared by Vacuum Deposition of CaF2 and Silicon

1981 ◽  
Vol 10 ◽  
Author(s):  
T. Asano ◽  
H. Ishiwara
Keyword(s):  
Substrate Temperature ◽  
Silicon Film ◽  
Single Crystal Silicon ◽  
Rutherford Backscattering ◽  
Film Deposition ◽  
Silicon Substrates ◽  
Optimum Conditions ◽  
Crystal Silicon ◽  
Transmission Electron ◽  
Substrate Temperatures

Heteroepitaxial CaF2/Si and Si/CaF2/Si structures were prepared by conventional vacuum evaporation of CaF2 and silicon onto silicon substrates. The optimum conditions for obtaining good epitaxial films were investigated by changing the silicon substrate orientation, the film thickness and the substrate temperature during film deposition. From Rutherford backscattering and channelling spectroscopy it was found that CaF2 films with excellent film quality were obtained on Si(111), Si(110) and Si(100) substrates at substrate temperatures of 600– 800°C, 800°C and 500–600°C respectively. It was also found from Rutherford backscattering and channelling spectroscopy and from transmission electron microscopy that single-crystal silicon films are formed on a CaF2/Si(111) structure at a substrate temperature of 700°C. From measurements of the electrical properties of the top silicon film after the implantation of phosphorus ions at 2 ×1015 cm−2 and subsequent annealing at 750°C, an electron Hall mobility of 69cm2 V−1 s−1 was obtained.

Sign in / Sign up

Export Citation Format

Share Document