Preparation and characterization of poly(acryl amide-coacrylic acid)/nay and Clinoptilolite nanocomposites with improved methylene blue dye removal behavior from aqueous solution

e-Polymers ◽  
2011 ◽  
Vol 11 (1) ◽  
Author(s):  
M. Zendehdel ◽  
A. Barati ◽  
H. Alikhani
Keyword(s):  
Methylene Blue ◽  
Acrylic Acid ◽  
Porous Materials ◽  
Ammonium Persulfate ◽  
Hydroxyl Group ◽  
Blue Dye ◽  
Thermo Gravimetric Analyzer ◽  
Ft Ir ◽  
Maximum Weight Loss

AbstractThe nanocomposites of poly(acryl amide-co-acrylic acid) with NaY and Clinoptilolite were prepared using ammonium persulfate as an initiator and N,N′- methylene bis acryl amide as the cross-linker. The morphology was characterized by SEM and the structure of nanocomposite materials was studied with XRD and FT-IR that showed the interaction between porous materials and poly(AAm-co- AAc). Thermo gravimetric analyzer (TGA) curve shows that all the chain-extended poly(AAm-co-AAc) are stable up to 250 °C and maximum weight loss occurs at 890 °C. The TGA results indicated higher stability for poly(acryl amide-co-acrylic acid)/NaY and Clinoptilolite composites than poly(AAm-co-AAc). The adsorption and desorption behavior of methylene blue were investigated for nanocomposites. It was shown that poly(AAm-co-AAc)/NaY and Clinoptilolite nanocomposites have higher adsorption than NaY, Clinoptilolite and poly(AAm-co-AAc) alone. This effect was attributed to good interaction between the hydroxyl group in porous materials and carboxylic group in poly(AAm-co-AAc) with methylene blue.

scholarly journals Synthesis of Cellulose Acetate-Polystyrene Membrane Composites from Pineapple Peel Wastes for Methylene Blue Removal

Al-Kimia ◽  
2019 ◽  
Vol 7 (2) ◽  
Author(s):  
Irvan Maulana Firdaus ◽  
Febiyanto Febiyanto ◽  
Try Fitriany ◽  
Lely Zikri Zulhidayah ◽  
Dyah Ayu Septiarini ◽  
...  
Keyword(s):  
Methylene Blue ◽  
Cellulose Acetate ◽  
Composite Membrane ◽  
Blue Dye ◽  
Stress And Strain ◽  
Methylene Blue Dye ◽  
Pineapple Peel ◽  
Methylene Blue Removal ◽  
Ft Ir

The cellulose acetate-polystyrene or CA-PS composite membrane from pineapple peel waste for methylene blue removal has been conducted. The steps were nata de pina preparation, cellulose acetylation process, preparation, and characterization of CA-PS composite membrane. The CA-PS composite membrane was characterized using Fourier Transform Infrared (FT-IR), Scanning Electron Microscopy (SEM), tensile and strain examination, respectively. The as-synthesized CA-PS composite membrane has the characteristic of rejection ability was about 29.96% with the pore size, membrane modulus, stress and strain were 1.9 μm, 12.48 MPa, 31.91 MPa, and 2.55, respectively. In this research, CA-PS composite membrane from pineapple peel waste was successfully removed the methylene blue dye even needs improvement to enhance its capability in rejection efficiency as same as membrane characteristics.   

scholarly journals Preparation and Characterization of a New Polymeric Multi-Layered Material Based K-Carrageenan and Alginate for Efficient Bio-Sorption of Methylene Blue Dye

Polymers ◽  
2021 ◽  
Vol 13 (3) ◽  
pp. 411
Author(s):  
Chiraz Ammar ◽  
Fahad M. Alminderej ◽  
Yassine EL-Ghoul ◽  
Mahjoub Jabli ◽  
Md. Shafiquzzaman
Keyword(s):  
Methylene Blue ◽  
Sodium Alginate ◽  
Blue Dye ◽  
Experimental Conditions ◽  
Virgin Sample ◽  
Ft Ir ◽  
Ir Analysis ◽  
The Stability ◽  
Cellulose Surface

The current study highlights a novel bio-sorbent design based on polyelectrolyte multi-layers (PEM) biopolymeric material. First layer was composed of sodium alginate and the second was constituted of citric acid and k-carrageenan. The PEM system was crosslinked to non-woven cellulosic textile material. Resulting materials were characterized using FT-IR, SEM, and thermal analysis (TGA and DTA). FT-IR analysis confirmed chemical interconnection of PEM bio-sorbent system. SEM features indicated that the microspaces between fibers were filled with layers of functionalizing polymers. PEM exhibited higher surface roughness compared to virgin sample. This modification of the surface morphology confirmed the stability and the effectiveness of the grafting method. Virgin cellulosic sample decomposed at 370 °C. However, PEM samples decomposed at 250 °C and 370 °C, which were attributed to the thermal decomposition of crosslinked sodium alginate and k-carrageenan and cellulose, respectively. The bio-sorbent performances were evaluated under different experimental conditions including pH, time, temperature, and initial dye concentration. The maximum adsorbed amounts of methylene blue are 124.4 mg/g and 522.4 mg/g for the untreated and grafted materials, respectively. The improvement in dye sorption evidenced the grafting of carboxylate and sulfonate groups onto cellulose surface. Adsorption process complied well with pseudo-first-order and Langmuir equations.

scholarly journals Magnetic peanut hulls for methylene blue dye removal: Isotherm and kinetic study

2015 ◽  
Vol 18 (1) ◽  
pp. 25-37 ◽  
Keyword(s):  
Methylene Blue ◽  
Blue Dye ◽  
Experimental Conditions ◽  
Thermogravimetric Analyzer ◽  
Biosorption Process ◽  
Peanut Hulls ◽  
Experimental Parameters ◽  
Pseudo Second Order ◽  
Ft Ir

<div> <p>Biosorption is an emerging technique for water treatment utilizing abundantly available biomaterials.The potential feasibility of magnetic peanut hulls particle for removal of cationic dye (methylene blue) from aqueous solution was investigated. The effects of various experimental parameters were examined and optimal experimental conditions were decided. Characterization of biosorbent was carried out by Fourier transform infrared spectroscopy (FT-IR) and thermogravimetric analyzer. FT-IR analysis showedthe presence of hydroxyl, carbonyl and carboxyl groups which can involve in the biosorption process. The results in this study indicated that peanut hull was an attractive candidate for removing cationic dyes from dye wastewater. Different kinetic and equilibrium models were applied to the experimental data. Tempkin model was the most fitted isotherm as R<sup>2</sup>= 0.963. While the resulting data for the different parameters studied was suitable to be pseudo second order.&nbsp;</p> </div> <p>&nbsp;</p>

Synthesis and Characterization of Polyaniline Film

2011 ◽  
Vol 239-242 ◽  
pp. 1382-1385
Author(s):  
Na Xu ◽  
Xiao Dong Shen ◽  
Sheng Cui
Keyword(s):  
Ammonium Persulfate ◽  
Pani Film ◽  
Cyclic Voltammograms ◽  
Ultrasonic Dispersion ◽  
Switching Speed ◽  
Color Changes ◽  
Fast Switching ◽  
Ft Ir ◽  
The Relationship

The electrochromic PANI film was prepared by emulsion polymerization with dodecyl benzene sulphonic acid (DBSA) as dopant and ammonium persulfate (APS) as initiator. Ultrasonic dispersion was adopted in the polymerization. The electrochemical properties, the surface morphology and structure of the prepared PANI film was characterized by means of Fourier Transform infrared spectroscopy (FT-IR), cyclic voltammograms (CV) and field emission scanning electron microscope (FE-SEM), respectively. The relationship between the morphology and properties of PANI film was detailedly discussed. The PANI film exhibited an excellent electrochromism with reversible color changes form yellow to purple. The PANI film also had quite good reaction kinetics with fast switching speed, and the response time for oxidation and reduction were 65 ms and 66 ms, respectively.

Empirical Equilibrium Study on Rice Husk and Eggshells as Low Cost Bioadsorbent for the Methylene Blue Removal

2014 ◽  
Vol 699 ◽  
pp. 221-226
Author(s):  
Nurul Hanim Razak ◽  
Md. Razali Ayob ◽  
M.A.M. Zainin ◽  
M.Z. Hilwa
Keyword(s):  
Methylene Blue ◽  
Rice Husk ◽  
Low Cost ◽  
Agricultural Waste ◽  
Textile Wastewater ◽  
Blue Dye ◽  
Rice Husks ◽  
Equilibrium Study ◽  
Porosity Characterization

Eggshells and rice husk, two types of notable agricultural waste were used as bioadsorbent to remove Methylene Blue dye (MBD) in aqueous solution. This study was to investigate the performance of these two bioadsorbents in removing MBD. The removal percentage, adsorption capacity, and porosity characterization were examined. The method applied was a physical filtration. UV-VIS Spectrophotometer was used to determine the efficiency of the bioadsorbents in MBD adsorption. The highest removal percentage at the most concentrated MBD were 51% and 98% for eggshells and rice husks respectively. Meanwhile the characterization of rice husks pore size and volume proves that higher adsorptivity towards dye compares to eggshells porosity. It was concluded that the eggshells and rice husks bioadsorbents was successful to treat industrial textile wastewater with rice husks as the most efficient bioadsorbent in removing MBD.

Synthesis of Adsorbent from Bagasse for Methylene Blue Adsorption

2021 ◽  
Vol 7 (2) ◽  
pp. 188-195
Author(s):  
Nurhasni Nurhasni ◽  
Sariana Harahap ◽  
Ahmad Fathoni ◽  
Hendrawati Hendrawati
Keyword(s):  
Methylene Blue ◽  
Textile Industry ◽  
Contact Time ◽  
Ph Effect ◽  
Blue Dye ◽  
Methylene Blue Dye ◽  
Batch Method ◽  
Homogeneous Surface ◽  
Dyeing Process ◽  
Ft Ir

The ability of bagasse adsorbents to adsorb methylene blue without activation using 0.5 M H2SO4 solution was examined. Methylene blue is widely used in the textile industry because it produces bright colors, and the dyeing process is fast and easy. This research aims to determine the optimum adsorption conditions, namely the variations in contact time, dye concentration, adsorbent mass, and pH effect on methylene blue, which were carried out using the batch method. Furthermore, the adsorbents were characterized by FT-IR and SEM. The optimum state of the bagasse adsorbent to adsorb methylene blue dye has a mass of 0.5 grams, a contact time of 30 minutes, a concentration of 50 ppm, and a pH of 5. The character of the adsorbent after activation with H2SO4 was better than without activation. The highest adsorption efficiency of methylene blue dye in the batch method was 99.67%. The FTIR spectrum of the bagasse adsorbent showed OH, C-H, C=O, C=C, and C-O functional groups. The adsorption isotherm model for methylene blue dye follows the Langmuir isotherm since the graph obtained is linear with the correlation coefficient (R2) = 1, where the adsorbent has a homogeneous surface.

Preparation and Characterization of Kenaf-Based Superabsorbent Polymers

2011 ◽  
Vol 183-185 ◽  
pp. 1812-1816
Author(s):  
Dan Wang ◽  
Zhan Qian Song ◽  
Shi Bin Shang ◽  
Zhan Jun Wang ◽  
Myoung Ku Lee
Keyword(s):  
Aqueous Solution ◽  
Acrylic Acid ◽  
Graft Copolymerization ◽  
Ph Value ◽  
Crosslinking Agent ◽  
Ammonium Persulfate ◽  
Deionized Water ◽  
Superabsorbent Polymers ◽  
Saline Solutions

Novel kenaf-based superabsorbent polymers (SAPs) were prepared by grafting acrylic acid (AA) and acrylamide (AM) onto kenaf cellulose. Graft copolymerization was carried out in aqueous solution using N, N’-methylenebisacrylamide (NMBA) as crosslinking agent and sodium bisulfite (NaHSO3) and ammonium persulfate ((NH4)2S2O8) as initiator. The SAPs so obtained were examined by SEM. The absorbency of SAPs consists of different kenaf cellulose in deionized water, saline solutions and different pH value solutions were investigated.

Sign in / Sign up

Export Citation Format

Share Document