scholarly journals VO2(B) conversion to VO2(A) and VO2(M) and their oxidation resistance and optical switching properties

2016 ◽  
Vol 34 (1) ◽  
pp. 169-176 ◽  
Author(s):  
Yifu Zhang
Keyword(s):  
Thermal Stability ◽  
Oxidation Resistance ◽  
Optical Switching ◽  
Variable Temperature ◽  
Thermo Gravimetric Analysis ◽  
Gravimetric Analysis ◽  
Hydrothermal Route ◽  
Scanning Calorimetry ◽  
Good Thermal Stability ◽  
Air Atmosphere

AbstractVanadium dioxide VO2 has been paid in recent years increasing attention because of its various applications, however, its oxidation resistance properties in air atmosphere have rarely been reported. Herein, VO2(B) nanobelts were transformed into VO2(A) and VO2(M) nanobelts by hydrothermal route and calcination treatment, respectively. Then, we comparatively studied the oxidation resistance properties of VO2(B), VO2(A) and VO2(M) nanobelts in air atmosphere by thermo-gravimetric analysis and differential thermal analysis (TGA/DTA). It was found that the nanobelts had good thermal stability and oxidation resistance below 341 °C, 408 °C and 465 °C in air, respectively, indicating that they were stable in air at room temperature. The fierce oxidation of the nanobelts occurred at 426, 507 and 645 °C, respectively. The results showed that the VO2(M) nanobelts had the best thermal stability and oxidation resistance among the others. Furthermore, the phase transition temperatures and optical switching properties of VO2(A) and VO2(M) were studied by differential scanning calorimetry (DSC) and variable temperature infrared spectra. It was found that the VO2(A) and VO2(M) nanobelts had outstanding thermochromic character and optical switching properties.

Decellularized liver-regenerative 3D printing biomaterials for cell-based liver therapies via a designed procedure combined with papain-containing reagent treatments and supercritical fluids

2021 ◽  
pp. 1-8
Author(s):  
Ching-Cheng Huang
Keyword(s):  
3D Printing ◽  
Thermo Gravimetric Analysis ◽  
Extraction Process ◽  
Gravimetric Analysis ◽  
Collagen Scaffolds ◽  
Scanning Calorimetry ◽  
Porcine Liver ◽  
Good Thermal Stability ◽  
Decellularized Liver ◽  
Liver Collagen

BACKGROUND: The biologic scaffolds derived from decellularized tissues and organs have been successfully developed in a variety of preclinical and/or clinical studies. OBJECTIVE: The new decellularized liver-regenerative 3D printing biomaterials were designed and prepared for cell-based liver therapies. METHODS: An extraction process was employed to remove the tissue and cellular molecules from porcine liver via pretreatment of supercritical fluid of carbon dioxide (ScCO2). Varying porosities of the decellularized liver tissues were created using papain-containing reagent treatments after ScCO2. RESULTS: The resulting liver-regenerative 3D printing biomaterials of decellularized liver collagen scaffolds were characterized by Fourier transform infrared spectroscopy, thermo-gravimetric analysis, differential scanning calorimetry and scanning electron microscopy. CONCLUSIONS: The decellularized liver collagen scaffolds with good thermal stability (>150 °C) were obtained and employed as liver-regenerative 3D printing biomaterials for cell-based liver therapies.

Optically active polymer: synthesis and characterization of new optically active poly (hydrazide-imide)s incorporating L- leucine

e-Polymers ◽  
2007 ◽  
Vol 7 (1) ◽  
Author(s):  
Abdol Reza Hajipour ◽  
Saeed Zahmatkesh ◽  
Arnold E. Ruoho
Keyword(s):  
Thermo Gravimetric Analysis ◽  
Specific Rotation ◽  
Optically Active ◽  
Gravimetric Analysis ◽  
Optically Active Polymer ◽  
Scanning Calorimetry ◽  
Thermo Gravimetric ◽  
Good Thermal Stability ◽  
H Nmr

AbstractThis paper deals with the polycondensation between a chiral diacyl chloride (N,N′-Pyromelliticdiimido-di-L-leucine chloride) and six different dihydrazides. The corresponding poly (hydrazide-imide)s which have been obtained in quantitative yields are moderately soluble in polar aprotic solvents, have good thermal stability and optical activity. The synthetic compounds have been characterized by IR, UV and 1H NMR spectroscopy, elemental analysis and specific rotation. The thermal properties of the polymers (10 and 15) have been studied by thermo gravimetric analysis (TGA) and differential scanning calorimetry (DSC).

Polymer nanocomposites reinforced with C60 fullerene: effect of hydroxylation

2011 ◽  
Vol 45 (25) ◽  
pp. 2595-2601 ◽  
Author(s):  
Tsuyoshi Saotome ◽  
Ken Kokubo ◽  
Shogo Shirakawa ◽  
Takumi Oshima ◽  
H. Thomas Hahn
Keyword(s):  
Thermal Stability ◽  
Thermo Gravimetric Analysis ◽  
Nanocomposite Films ◽  
Light Transmittance ◽  
C60 Fullerene ◽  
Partial Hydrolysis ◽  
Poly Vinyl Alcohol ◽  
Gravimetric Analysis ◽  
Scanning Calorimetry ◽  
Thermal Stability Of

Novel nanocomposite films of polycarbonate (PC) with fullerene derivatives, such as pristine fullerene C60 and polyhydroxylated-fullerenes, C60(OH)12 and C60(OH)36, were prepared. The optical, thermal, and mechanical properties of the composites were measured. Nanocomposite films of poly (vinyl alcohol) (PVA) with C60(OH)36 were prepared as a reference to show how improved dispersion of the nanofiller affects the overall transparency of the composites. Ultraviolet-visible spectroscopy showed that the addition of hydroxylated fullerenes did not affect visible light transmittance of the films significantly in the range of 400–800 nm. Differential scanning calorimetry (DSC) and thermo–gravimetric analysis (TGA) measurements showed the increased thermal stability of PC/C60(OH)12 film as compared to pristine PC film. This phenomenon was explained by the rigid polymer interphase regions formed around C60(OH)12 due to the plausible hydrogen bonding and hydrophobic interaction. On the other hand, the lower thermal stability of PC–C60(OH)36 was assumed to be caused by large agglomeration of the C60(OH)36 particles and the partial hydrolysis of the polycarbonate matrix. Tensile testing of the composites showed reduction in elongation at break and yield tensile strength. These results may be caused by the particle agglomerations which act as the initiation points for cracks.

Temperature-dependent rheological properties of viscoelastic polymer based flexible abrasive media for finishing process

2021 ◽  
pp. 095440892098790
Author(s):  
Santhosh Kumar S ◽  
Somashekhar S Hiremath
Keyword(s):  
Rheological Properties ◽  
Loss Modulus ◽  
Thermo Gravimetric Analysis ◽  
Testing Machine ◽  
Gravimetric Analysis ◽  
Scanning Calorimetry ◽  
Good Thermal Stability ◽  
Viscoelastic Polymer ◽  
Finishing Process ◽  
The Media

The objective of the present investigation is to develop and study the thermal and rheological properties of the in-house developed flexible abrasive media. It is a mixer of viscoelastic polymer and plasticizer mixed with micro-abrasive particles, used for removing debris and irregularities present on internal and external complex surfaces used in the aerospace, automotive and medical industries. This paper presents, morphology of the developed abrasive media is captured using the Scanning Electron Microscope (SEM), thermal properties of the abrasive media are studied using Thermo Gravimetric Analysis (TGA) and Differential Scanning Calorimetry (DSC) analysis along with tensile properties of the abrasive media ascertained using the universal testing machine. The rheological properties of the media play a major role in media flow over the intricate shapes and removing the material from the surface. To understand the media behavior, further rheological properties such as viscosity, shear stress, storage modulus, loss modulus, loss tangent, and complex viscosity are ascertained with varying shear rate and frequency at different temperature using rheometer. The TGA and DSC results shows abrasive media has good thermal stability and possibility of using the media for finishing process under lower temperature <100 °C. Rheological studies shows the shear thinning behaviour of the media and elastic solid behavior (G′ > G′′) at different temperatures which is suitable for finishing the complex internal and the external features efficiently and effectively. The developed abrasive media is used to finish the hydraulic components which are difficult to access with conventional tools and the results of finishing process are presented.

Investigating the Biodegradability and Physical Properties of Starch Derived Bioplastic Films Reinforced with Nanosilica

2018 ◽  
Vol 18 (06) ◽  
pp. 1850037 ◽  
Author(s):  
Anagha Ashok ◽  
C. R. Rejeesh
Keyword(s):  
Electron Microscopy ◽  
Thermal Stability ◽  
Thermo Gravimetric Analysis ◽  
Thermoplastic Starch ◽  
High Rate ◽  
Gravimetric Analysis ◽  
Scanning Calorimetry ◽  
Pilot Investigation ◽  
Nanosilica Particles ◽  
Xrd Techniques

This study is a pilot investigation on the effect of using nanosilica for reinforcing thermoplastic starch-based bioplastic films. An arbitrary 0.2[Formula: see text]wt.% of nanosilica particles were used to reinforce starch derived bioplastic materials and were further investigated for potential benefits. Nanosilica was extracted from rice husk and was characterized using methods like Fourier transform infrared spectroscopy (FTIR) technique and Brunauer–Emmett–Teller (BET) method. Transmission electron microscopy (TEM) and X-ray diffraction (XRD) techniques were used to determine the structure of nanosilica crystals. Scanning electron microscopy (SEM) technique was used to study the surface topography and composition of nano ‘silica. Both raw and reinforced bioplastic films were tested for thermal stability using thermo gravimetric analysis (TGA) and differential scanning calorimetry (DSC) tests and their performance was compared. Mechanical properties were compared using tensile and tear tests and biodegradability was assessed through enzymatic degradation analysis. It was found that the presence of nanosilica improved the bonding of polymer matrix and in turn increased the thermal stability and tear strength. Nanosilica reinforced matrix resulted in the increase of surface area than raw bioplastic matrix, which lead to high rate of enzymatic reactivity and degradation rate.

The Research for the Properties of the Outlast/Viscose Blended Yarns

2014 ◽  
Vol 633-634 ◽  
pp. 464-467
Author(s):  
Rui Peng Jin ◽  
Zi Min Jin ◽  
Xue Qin Wang ◽  
Yu Xiu Yan ◽  
Jian Wei Tao
Keyword(s):  
Thermal Stability ◽  
Differential Scanning Calorimetry ◽  
Elastic Property ◽  
Thermo Gravimetric Analysis ◽  
Gravimetric Analysis ◽  
Scanning Calorimetry ◽  
Thermo Gravimetric ◽  
Blended Yarn ◽  
Environment Temperature ◽  
Comfort Property

Outlast fiber is a kind of thermostat fiber that could absorb and release heat according to the changed environment temperature. It has been widely used in thermostat textiles. The outlast/viscose blended yarn we researched in this paper will be used in apparel fabric. As the demand in durability and comfort property of apparel fabric, we characterized the yarn by regain, tensile and damage properties, elastic property, differential scanning calorimetry (DSC) and thermo gravimetric analysis (TGA). The experiment results show that the outlast/viscose blended yarns have good hydroscopicity, elastic property, temperature adjusting performance and thermal stability.

The Effect of Bacterial Cellulose on the Mechanical and Thermal Expansion Properties of Kenaf/Polylactic Acid Composites

2011 ◽  
Vol 117-119 ◽  
pp. 1343-1351 ◽  
Author(s):  
Prakit Sukyai ◽  
Klana Rong Sriroth ◽  
Byoung Ho Lee ◽  
Joong Kim Hyun
Keyword(s):  
Thermal Stability ◽  
Bacterial Cellulose ◽  
Storage Modulus ◽  
Loss Modulus ◽  
Thermo Gravimetric Analysis ◽  
Gravimetric Analysis ◽  
Scanning Calorimetry ◽  
Fiber Volume ◽  
Nano Cellulose ◽  
Electron Microscopes

The reinforcement of PLA matrix with natural fibers aims to generate the sustainable biocomposites. Kenaf fiber (KF) and bacterial cellulose (BC) were employed to reinforce and diminish the usage of PLA matrix. Particularly, BC is nano-cellulose which was anticipated to increased interfacial area and therefore low volume fractions of additives. That was consequently to attain mechanical property improvement. Thus, the incorporation of KF and BC reinforced PLA composites was investigated. The extrusion method was utilized and materials were mixed outside prior to adding. The specimens were examined mechanical testing, Dynamic Mechanical Analysis (DMA), Differential Scanning Calorimetry (DSC), Thermo Gravimetric Analysis (TGA) and Scanning Electron Microscopes (SEM). The mechanical study revealed that the increment of elastic modulus increased concomitantly with the augmentation of KF content. Interestingly, PLA/KF/BC sample at ratio of 60/39/1 wt.% was efficiently to maintain tensile and flexural strength comparing to 50% reduction of without BC sample with equal fiber volume. Therefore, it could recognize that mechanical properties was improved by using low amount of nano-cellulose. This would be a high aspect ratio of BC that capable to connect between PLA matrix and KF which enhanced a large contact surface and therefore excellent coherence. The temperature dependence of storage, loss and tan delta was determined by DMA. A decrease of storage modulus was consistent with increasing of temperature, result from softening of the composites. Loss modulus was increased approximately at Tg which related to storage modulus cause. In addition, the tan delta peaks of PLA and composites were around 60°C and it did not significantly shift when emerged of fiber. DSC of both composites indicated an influence of fiber on the crystallization and enthalpy. On the other hand, glass transition and melting temperature did not significantly affect. The composites exhibited a small reduction of thermal stability when examined by TGA analysis. Notwithstanding, BC showed an improvement of thermal stability of PLA/KF/BC sample at 40 wt.% total fiber content. The linkage of BC between PLA matrix and KF was monitored by SEM.

scholarly journals Thiodiethylene glycol based polyesters: synthesis and thermal characterization

e-Polymers ◽  
2006 ◽  
Vol 6 (1) ◽  
Author(s):  
N. Lotti ◽  
L. Finelli ◽  
M. Messori ◽  
A. Munari
Keyword(s):  
Thermo Gravimetric Analysis ◽  
Crystallization Rate ◽  
Thermal Characterization ◽  
Polymeric Chain ◽  
Gravimetric Analysis ◽  
Scanning Calorimetry ◽  
Good Thermal Stability ◽  
Ether Oxygen ◽  
Thiodiethylene Glycol ◽  
Sulfur Containing

AbstractPoly(thiodiethylene terephthalate) (PSDET), poly(thiodiethylene adipate) (PSDEA), poly(diethylene terephthalate) (PDET) and poly(diethylene adipate) (PDEA) for comparison were synthesized and characterized in terms of chemical structure and molecular weight. The thermal behavior was examined by thermo gravimetric analysis and differential scanning calorimetry. All the polymers showed a good thermal stability, even though lower for the sulfur-containing polyesters. At room temperature they appeared as semicrystalline materials, except PDEA, which was an oil; the effect of substitution of ether oxygen atoms with sulfur ones was a lowering in the Tg value, an increment of melting temperature and an increase of crystallization rate. The results were explained as due to the presence of flexible C-S-C bonds in the polymeric chain.

scholarly journals Biocomposites of Bio-Polyethylene Reinforced with a Hydrothermal-Alkaline Sugarcane Bagasse Pulp and Coupled with a Bio-Based Compatibilizer

Molecules ◽  
2020 ◽  
Vol 25 (9) ◽  
pp. 2158
Author(s):  
Nanci Vanesa Ehman ◽  
Diana Ita-Nagy ◽  
Fernando Esteban Felissia ◽  
María Evangelina Vallejos ◽  
Isabel Quispe ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
3D Printing ◽  
Water Absorption ◽  
Sugarcane Bagasse ◽  
Thermo Gravimetric Analysis ◽  
Decomposition Temperature ◽  
Gravimetric Analysis ◽  
Scanning Calorimetry ◽  
Cradle To Gate ◽  
Bagasse Pulp

Bio-polyethylene (BioPE, derived from sugarcane), sugarcane bagasse pulp, and two compatibilizers (fossil and bio-based), were used to manufacture biocomposite filaments for 3D printing. Biocomposite filaments were manufactured and characterized in detail, including measurement of water absorption, mechanical properties, thermal stability and decomposition temperature (thermo-gravimetric analysis (TGA)). Differential scanning calorimetry (DSC) was performed to measure the glass transition temperature (Tg). Scanning electron microscopy (SEM) was applied to assess the fracture area of the filaments after mechanical testing. Increases of up to 10% in water absorption were measured for the samples with 40 wt% fibers and the fossil compatibilizer. The mechanical properties were improved by increasing the fraction of bagasse fibers from 0% to 20% and 40%. The suitability of the biocomposite filaments was tested for 3D printing, and some shapes were printed as demonstrators. Importantly, in a cradle-to-gate life cycle analysis of the biocomposites, we demonstrated that replacing fossil compatibilizer with a bio-based compatibilizer contributes to a reduction in CO2-eq emissions, and an increase in CO2 capture, achieving a CO2-eq storage of 2.12 kg CO2 eq/kg for the biocomposite containing 40% bagasse fibers and 6% bio-based compatibilizer.

Synthesis, characterization and corrosion protection properties of polyN-(p-bromophenyl)-2-methacrylamide-co-glycidyl methacrylate on low nickel stainless steel

2011 ◽  
Vol 31 (2-3) ◽  
Author(s):  
Sakvai Mohammed Safiullah ◽  
Deivasigamani Thirumoolan ◽  
Kottur Anver Basha ◽  
K. Mani Govindaraju ◽  
Dhanraj Gopi ◽  
...  
Keyword(s):  
Stainless Steel ◽  
Corrosion Protection ◽  
Glycidyl Methacrylate ◽  
Electrochemical Impedance ◽  
Thermo Gravimetric Analysis ◽  
Gel Permeation Chromatography ◽  
Gravimetric Analysis ◽  
Scanning Calorimetry ◽  
Protection Efficiency ◽  
Ft Ir

Abstract The synthesis of copolymers from different feed ratios of N-(p-bromophenyl)-2- methacrylamide (PBPMA) and glycidyl methacrylate (GMA) was achieved by using free radical solution polymerization technique and characterized using FT-IR, 1H and 13C NMR spectroscopy. The thermal stability of the synthesized copolymers was studied using thermo-gravimetric analysis (TGA) and differential scanning calorimetry (DSC). The molecular weight of the copolymer is determined by gel permeation chromatography (GPC). The corrosion performances of low nickel stainless steel specimens dip coated with different composition of copolymers were investigated in 0.5 M H2SO4 using potentiodynamic polarization and electrochemical impedance spectroscopic (EIS) techniques. The polarization and impedance measurements showed different corrosion protection efficiency with change in composition of the copolymers. It was found that the corrosion protection properties are owing to the barrier effect of the polymer layer covered on the low nickel stainless steel surfaces. However, it is observed that the mole ratio of PBPMA and GMA plays a major role in the protective nature of the copolymer.

Sign in / Sign up

Export Citation Format

Share Document