scholarly journals Numerical heat transfer analysis of transcritical hydrocarbon fuel flow in a tube partially filled with porous media

Open Physics ◽  
2016 ◽  
Vol 14 (1) ◽  
pp. 659-667 ◽  
Author(s):  
Yuguang Jiang ◽  
Yu Feng ◽  
Silong Zhang ◽  
Jiang Qin ◽  
Wen Bao
Keyword(s):  
Heat Transfer ◽  
Porous Media ◽  
Heat Transfer Enhancement ◽  
Thermal Protection ◽  
Hydrocarbon Fuel ◽  
High Heat ◽  
Heat Transfer Analysis ◽  
High Heat Flux ◽  
Rocket Engines ◽  
Transfer Enhancement

AbstractHydrocarbon fuel has been widely used in air-breathing scramjets and liquid rocket engines as coolant and propellant. However, possible heat transfer deterioration and threats from local high heat flux area in scramjet make heat transfer enhancement essential. In this work, 2-D steady numerical simulation was carried out to study different schemes of heat transfer enhancement based on a partially filled porous media in a tube. Both boundary and central layouts were analyzed and effects of gradient porous media were also compared. The results show that heat transfer in the transcritical area is enhanced at least 3 times with the current configuration compared to the clear tube. Besides, the proper use of gradient porous media also enhances the heat transfer compared to homogenous porous media, which could help to avoid possible over-temperature in the thermal protection.

Phenomenon and Mechanism of Spray Cooling on Nanowire Arrayed and Hybrid Micro/Nanostructured Surfaces

2018 ◽  
Vol 140 (11) ◽  
Author(s):  
Jian-nan Chen ◽  
Rui-na Xu ◽  
Zhen Zhang ◽  
Xue Chen ◽  
Xiao-long Ouyang ◽  
...  
Keyword(s):  
Heat Transfer ◽  
Heat Transfer Enhancement ◽  
High Speed ◽  
Spray Cooling ◽  
High Heat ◽  
High Heat Flux ◽  
Transfer Enhancement ◽  
Nanostructured Surfaces ◽  
New Energy ◽  
Dry Out

Enhancing spray cooling with surface structures is a common, effective approach for high heat flux thermal management to guarantee the reliability of many high-power, high-speed electronics and to improve the efficiency of new energy systems. However, the fundamental heat transfer enhancement mechanisms are not well understood especially for nanostructures. Here, we fabricated six groups of nanowire arrayed surfaces with various structures and sizes that show for the first time how these nanostructures enhance the spray cooling by improving the surface wettability and the liquid transport to quickly rewet the surface and avoid dry out. These insights into the nanostructure spray cooling heat transfer enhancement mechanisms are combined with microstructure heat transfer mechanism in integrated microstructure and nanostructure hybrid surface that further enhances the spray cooling heat transfer.

scholarly journals Heat Transfer Enhancement Using Unidirectional Porous Media under High Heat Flux Conditions

2021 ◽  
Author(s):  
Kazuhisa Yuki
Keyword(s):  
Heat Transfer ◽  
Heat Flux ◽  
Heat Transfer Enhancement ◽  
Porous Metal ◽  
High Heat ◽  
High Heat Flux ◽  
Porous Metals ◽  
Transfer Enhancement ◽  
Two Phase ◽  
Porous Copper

In this chapter, new heat transfer enhancement technologies with unidirectional porous metal called “EVAPORON” and “Lotus’ Breathing” are introduced to remove and manage heat from high heat flux equipment. The unidirectional porous metals introduced here can be easily fabricated by unique techniques such as mold casting technique, explosive welding technique, and 3D printing technique. First of all, many kinds of porous media, which have been introduced by the author so far as a heat transfer promoter, are compared each other to clarify what kind of porous metal is more suitable for high heat flux removal and cooling by focusing on the permeability and the effective thermal conductivity. For the practical use of the unidirectional porous copper with high permeability and high thermal conductivity, at first, heat transfer performance of two-phase flow cooling using a heat removal device called “EVAPORON” is reviewed aiming at extremely high heat flux removal beyond 10 MW/m2. We have been proposing this device with the unidirectional porous copper fabricated by 3D printing technique as the heat sink of a nuclear fusion divertor and a continuous casting mold. Second, two-phase immersion cooling technique called “Lotus’ Breathing” utilizing “Breathing Phenomenon” is introduced targeting at thermal management of various electronics such as power electronics and high performance computers. The level of the heat flux is 0.1 MW/m2 to 5 MW/m2. In addition, as the other heat transfer enhancing technology with unidirectional porous metals, unidirectional porous copper pipes fabricated by explosive welding technique are also introduced for heat transfer enhancement of single-phase flow.

Dependence of Heat Transfer Coefficient on Porous Structure in Porous Media

2008 ◽  
Author(s):  
Akira Matsui ◽  
Kazuhisa Yuki ◽  
Hidetoshi Hashizume
Keyword(s):  
Heat Transfer ◽  
Heat Flux ◽  
Porous Media ◽  
Heat Transfer Coefficient ◽  
Transfer Coefficient ◽  
High Performance ◽  
Heat Removal ◽  
High Heat ◽  
Metal Foams ◽  
High Heat Flux

Detailed heat transfer characteristics of particle-sintered porous media and metal foams are evaluated to specify the important structural parameters suitable for high heat removal. The porous media used in this experiment are particle-sintered porous media made of bronze and SUS316L, and metal foams made of copper and nickel. Cooling water flows into the porous medium opposite to heat flux input loaded by a plasma arcjet. The result indicates that the bronze-particle porous medium of 100μm in pore size shows the highest performance and achieves heat transfer coefficient of 0.035MW/m2K at inlet heat flux 4.6MW/m2. Compared with the heat transfer performance of copper fiber-sintered porous media, the bronze particlesintered ones give lower heat transfer coefficient. However, the stable cooling conditions that the heat transfer coefficient does not depend on the flow velocity, were confirmed even at heat flux of 4.6MW/m2 in case of the bronze particle-sintered media, while not in the case of the copper-fiber sintered media. This signifies the possibility that the bronze-particle sintered media enable much higher heat flux removal of over 10MW/m2, which could be caused by higher permeability of the particle-sintered pore structures. Porous media with high permeability provide high performance of vapor evacuation, which leads to more stable heat removal even under extremely high heat flux. On the other hand, the heat transfer coefficient of the metal foams becomes lower because of the lower capillary and fin effects caused by too high porosity and low effective thermal conductivity. It is concluded that the pore structure having high performance of vapor evacuation as well as the high capillary and high fin effects is appropriate for extremely high heat flux removal of over 10MW/m2.

One-Dimensional Zonal Model for the Unsteady Heat Transfer Analysis in an Open Volumetric Air Receiver

2020 ◽  
Vol 13 (1) ◽  
Author(s):  
Gurveer Singh ◽  
Vishwa Deepak Kumar ◽  
Laltu Chandra ◽  
R. Shekhar ◽  
P. S. Ghoshdastidar
Keyword(s):  
Heat Transfer ◽  
High Heat ◽  
Operating Conditions ◽  
Heat Transfer Analysis ◽  
Transfer Model ◽  
High Heat Flux ◽  
Unsteady Heat Transfer ◽  
Volumetric Heating ◽  
One Dimensional ◽  
Zonal Model

Abstract The open volumetric air receiver (OVAR)-based central solar thermal systems provide air at a temperature > 1000 K. Such a receiver is comprised of porous absorbers, which are exposed to a high heat-flux > 800 Suns (1 Sun = 1 kW/m2). A reliable assessment of heat transfer in an OVAR is necessary to operate such a receiver under transient conditions. Based on a literature review, the need for developing a comprehensive, unsteady, heat transfer model is realized. In this paper, a seven-equations based, one-dimensional, zonal model is deduced. This includes heat transfer in porous absorber, primary-air, return-air, receiver casing, and their detailed interaction. The zonal model is validated with an inhouse experiment showing its predictive capability, for unsteady and steady conditions, within the reported uncertainty of ±7%. The validated model is used for investigating the effect of operating conditions and absorber geometry on the thermal performance of an absorber. Some of the salient observations are (a) the maximum absorber porosity of 70–90% may be preferred for non-volumetric and volumetric-heating conditions, (b) the minimum air-return ratio should be 0.7, and (c) the smallest gap to absorber-length ratio of 0.2 should suffice. Finally, suggestions are provided for extending the model.

Effect of 45-Deg Rib Orientations on Heat Transfer in a Rotating Two-Pass Channel With Aspect Ratio From 4:1 to 2:1

2019 ◽  
Author(s):  
Izzet Sahin ◽  
Andrew F. Chen ◽  
Chao-Cheng Shiau ◽  
Je-Chin Han ◽  
Robert Krewinkel
Keyword(s):  
Heat Transfer ◽  
Pressure Drop ◽  
Aspect Ratio ◽  
Heat Transfer Enhancement ◽  
Rotation Number ◽  
Pressure Loss ◽  
Heat Transfer Analysis ◽  
Internal Cooling ◽  
Transfer Enhancement ◽  
First Passage

Abstract The internal cooling passages of gas turbine blades mostly have varying aspect ratios from one passage to another. However, there are limited data available in the open literature that used a reduced cross-section and aspect ratio, AR, after the tip turn. Therefore, the current study presents heat transfer and pressure drop of three different α = 45° profiled rib orientations, typical parallel (usual), reversed parallel (unusual), and criss-cross patterns in a rotating two-pass rectangular channel with AR = 4:1 and 2:1 in the first radially outward flow and second radially inward flow passages respectively. For each rib orientation, regional averaged heat transfer results are obtained for both the flow passages with the Reynolds number ranging from 10,000 to 70,000 for the first passage and 16000 to 114000 for the second passage with a rotational speed range of 0 rpm to 400 rpm. This results in the highest rotation number of 0.39 and 0.16 for the first and second passage respectively. The effects of rib orientation, aspect ratio variation, 180° tip turn, and rotation number on the heat transfer and pressure drop will be addressed. According to the results, for usual, unusual and criss-cross rib patterns, increasing rotation number causes the heat transfer to decrease on the leading surface and increase on the trailing surface for the first passage and vice versa for the second passage. Overall heat transfer enhancement of the usual and unusual rib patterns is higher than criss-cross one. In terms of the pressure losses, the criss-cross rib pattern has the lowest and the usual rib pattern has the highest-pressure loss coefficients. When pressure loss and heat transfer enhancement are both taken into account together, the criss-cross or unusual rib pattern might be an option to use in the internal cooling method. Therefore, the results can be useful for turbine blade internal cooling design and heat transfer analysis.

Transient Heat Transfer Analysis of Freeze Plate Structures Cooled by Nanofluids

2006 ◽  
Author(s):  
Rong-Yuan Jou
Keyword(s):  
Heat Transfer ◽  
Heat Transfer Enhancement ◽  
Nano Particles ◽  
Heat Transfer Analysis ◽  
Transient Heat Transfer ◽  
Innovative Technology ◽  
Transfer Enhancement ◽  
Left Hand ◽  
Smooth Channel ◽  
Transport Problems

Heat transfer enhancement by nanofluids is an emerging and innovative technology for traditional heat transfer problems. However, researches of nanofluids for refrigeration applications are rare either theoretically or experimentally. In this paper, the physical model of a freezing chucker is considered as a two-dimensional domain which is consist of the top and bottom copper plates, and a channel for flowing of copper nanofluids. Inlet flow passes through the left hand side and exhausts to the outlet at right hand side. Three kinds of transverse rib structures, e/Dh = 0.1, 0.2, 0.3, are attached on the internal top wall of the channel for heat transfer enhancement of the coolant flows. To investigate this problem, the transient heat transfer of this channel flow is analyzed and transport problems are solved numerically for the ethylene-glycol (EG) based nanofluids mixture of copper nano-particles with volume fractions of 0%, 0.5%, 1%, 5%, respectively. The smooth channel problem is analyzed and compared to the ribbed channel problem. Analyses of the highest decay rate, the lowest temperature, and temperature distributions of the top-plate surface of a freezing chucker are shown.

Sign in / Sign up

Export Citation Format

Share Document