scholarly journals Fragmented Agrarian Space: Building Blocks and Modernisation Trajectories. The Case of Slovenia

2017 ◽  
Vol 36 (2) ◽  
pp. 37-48
Author(s):  
Irma Potočnik Slavič

Abstract Production, processing and consumption within Slovenian agrarian space are fragmented due to physical constraints (72.4% of the territory categorised as ANC) and socio-geographic factors. Based on available data, five essential building blocks of contemporary Slovenian agrarian space (available land, change management, integrated circular economy, adjustable policies, and flexibility of institutions) are discussed. Interrelations among the building blocks shape the modernisation trajectories of approx. 70,000 agricultural holdings in Slovenia. The coexistence of three modernisation trajectories, i.e. practised autarky, various forms of pluri-activity, and small-scale intensive and innovative modernisation, creates a complex mosaic. The governance of multifunctional and multi-structured agrarian space is becoming more demanding.

Micromachines ◽  
2021 ◽  
Vol 12 (2) ◽  
pp. 118
Author(s):  
Jean-Laurent Pouchairet ◽  
Carole Rossi

For the past two decades, many research groups have investigated new methods for reducing the size and cost of safe and arm-fire systems, while also improving their safety and reliability, through batch processing. Simultaneously, micro- and nanotechnology advancements regarding nanothermite materials have enabled the production of a key technological building block: pyrotechnical microsystems (pyroMEMS). This building block simply consists of microscale electric initiators with a thin thermite layer as the ignition charge. This microscale to millimeter-scale addressable pyroMEMS enables the integration of intelligence into centimeter-scale pyrotechnical systems. To illustrate this technological evolution, we hereby present the development of a smart infrared (IR) electronically controllable flare consisting of three distinct components: (1) a controllable pyrotechnical ejection block comprising three independently addressable small-scale propellers, all integrated into a one-piece molded and interconnected device, (2) a terminal function block comprising a structured IR pyrotechnical loaf coupled with a microinitiation stage integrating low-energy addressable pyroMEMS, and (3) a connected, autonomous, STANAG 4187 compliant, electronic sensor arming and firing block.


Author(s):  
Nan-Hua Nadja Yang ◽  
Ana Carolina Bertassini ◽  
Jéssica Alves Justo Mendes ◽  
Mateus Cecílio Gerolamo

AbstractFor the transition towards a circular economy (CE), organisations have to be prepared to adapt to major changes. Thus, the concept and implementation of change management (CM) will be essential to an organisation’s success during this transformative period. Studies have shown that organisational CE barriers were more significant than individual CE barriers. To overcome such obstacles, the most appropriate set of managerial practices should be carefully considered. These barriers also have the potential to influence the agricultural sector, which seeks to adopt more sustainable ways of production. The goal of this paper is to propose a solution framework based on CM strategies to overcome organisational challenges posed by a CE, especially for agribusinesses. To accomplish this objectively, a systematic literature review and a content analysis were conducted. The common errors in CM within the implementation process and the main CE barriers were identified and classified. An in-depth analysis of the issue’s roots led to a solid understanding of how to tackle such CM problems. This paper presents an overview of organisational CE barriers verified in the agricultural context, the common errors in CM, and the correlation between these findings. The two areas were then combined in a matrix that shows the connection between common errors in CM errors and CE barriers. Based on this result, a solution framework called 3CE2CE was developed that provides a step-by-step guide on how organisations can successfully undergo transformation processes towards a CE with the principles of CM.


2020 ◽  
Vol 40 (9) ◽  
pp. 771-781
Author(s):  
Janne van Gisbergen ◽  
Jaap den Doelder

AbstractRecycling of thermoplastic polymers is an important element of sustainable circular economy practices. The quality of mechanically recycled polymers is a concern. A method is presented to predict the structure and processability of recycled blends of polymers based on processability knowledge of their virgin precursor components. Blending rules at molecular weight distribution level are well established and form the foundation of the new method. Two essential fundamental building blocks are combined with this foundation. First, component and blend structure are related to viscosity via tube theories. Second, viscosity is related to melt flow index via a continuum mechanics approach. Emulator equations are built based on virtual experimental designs for fast forward and reverse calculations directly relating structure to viscosity and processability. The new combined method is compared with empirical blend rules, and shows important similarities and also clear quantitative differences. Finally, the new method is applied to practical recycling quality challenges.


Author(s):  
Lorenzo Cappietti ◽  
Irene Simonetti ◽  
Ilaria Crema

Abstract The use of Very Large Floating Structures, VLFS, may represent a strategic approach in order to cope with some of the future societal challenges arising from the impressive growth of the world population. In this article, the motivations of this perspective are briefly discussed, the main issues for the development of VLFS are summarized and a concept structural design based on building-blocks technology is proposed. A small-scale physical model was manufactured and tested in the wave-current flume of the Laboratory of Maritime Engineering, LABIMA, of the Florence University, Italy. The aim of this study is the assessment of the structural feasibility and the effectiveness of the proposed VLFS concept, in terms of resistance to wave loads and control of floating behavior. The experimental measurements provide a first contribution to the necessary knowledge, about load magnitudes and floating behavior, for sizing some of the key structural components. The results appear to support the feasibility of the system in terms of usage of structural materials, technical components and building technologies, available at present, that can withstand the measured loads. Moreover, the acquired experimental database is fundamental in order to validate numerical models, in the perspective of using also such tools as complementary methodology for further improvement of the knowledge of design issues.


2019 ◽  
Vol 489 (2) ◽  
pp. 1667-1683 ◽  
Author(s):  
Essam Heggy ◽  
Elizabeth M Palmer ◽  
Alain Hérique ◽  
Wlodek Kofman ◽  
M Ramy El-Maarry

ABSTRACT Radar observations provide crucial insights into the formation and dynamical evolution of comets. This ability is constrained by our knowledge of the dielectric and textural properties of these small-bodies. Using several observations by Rosetta as well as results from the Earth-based Arecibo radio telescope, we provide an updated and comprehensive dielectric and roughness description of Comet 67P/CG, which can provide new constraints on the radar properties of other nuclei. Furthermore, contrary to previous assumptions of cometary surfaces being dielectrically homogeneous and smooth, we find that cometary surfaces are dielectrically heterogeneous ( εr′≈1.6–3.2), and are rough at X- and S-band frequencies, which are widely used in characterization of small-bodies. We also investigate the lack of signal broadening in CONSERT observations through the comet head. Our results suggest that primordial building blocks in the subsurface are either absent, smaller than the radar wavelength, or have a weak dielectric contrast (Δ εr′). To constrain this ambiguity, we use optical albedo measurements by the OSIRIS camera of the freshly exposed subsurface after the Aswan cliff collapse. We find that the hypothetical subsurface blocks should have |Δ εr′|≳0.15, setting an upper limit of ∼ 1 m on the size of 67P/CG's primordial building blocks if they exist. Our analysis is consistent with a purely thermal origin for the ∼ 3 m surface bumps on pit walls and cliff-faces, hypothesized to be high-centred polygons formed from fracturing of the sintered shallow ice-bearing subsurface due to seasonal thermal expansion and contraction. Potential changes in 67P/CG's radar reflectivity at these at X- and S-bands can be associated with large-scale structural changes of the nucleus rather than small-scale textural ones. Monitoring changes in 67P/CG's radar properties during repeated close-approaches via Earth-based observations can constrain the dynamical evolution of its cometary nucleus.


2020 ◽  
Author(s):  
Maria Wirth ◽  
Johannes Kisser

<p>The present-day urban system is characterised by a one-directional flow of resources from the rural environment into cities. Cities are centres of human and economic activity, but also of resource use and waste. Therefore, they play both a critical and promising role to support the transition to a circular economy, by keeping incoming products, materials and resources in use. This requires a redesign of biological and technical material cycles in a way that their value can be maintained at the highest possible level for as long as possible, while at the same time natural systems are restored. How can we rethink urban infrastructures to transform cities from resource sinks into circular resource transformation hubs? And how can nature-inspired systems help us to create circular cities?</p><p>alchemia-nova is developing integrated, regenerative systems to close water, nutrient, material and energy cycles in cities, centred around buildings as multifunctional service providers. They include building-integrated nature-based solutions for small-scale on-site wastewater treatment, combined with organic solids management to platform chemicals, biogas and nutrients. This approach can enable the efficient valorisation of the high resource potential of urban nutrient flows, with near zero-energy and chemical input. This way, they provide a more efficient, robust and resilient alternative to the predominant chemical and energy-intensive end-of-pipe approaches to circular cities. Water and nutrients can be safely reused in urban and peri-urban agriculture, renewable energy produced on site, biomass and other solid waste further processed to secondary materials, while also gaining the multifunctional benefits of urban greening. These systems are being demonstrated through the EU H2020 HOUSEFUL project in Austria and Spain, complimented by demonstration sites in Greece (EU H2020 HYDROUSA project), thus ensuring their applicability in highly industrialised infrastructure and temperate climatic conditions, as well as in less developed communal infrastructure and Mediterranean arid climatic conditions. HOUSEFUL’s integrated management approach includes circular materials management along the entire housing value chain, e.g. to enable local sourcing of building materials. Together, the robust, low-maintenance technologies and circular materials management contribute to the creation of distributed resource transformation hubs across cities, where value is maintained, and secondary resources captured and recirculated where they occur, creating more efficient and more resilient circular cities, and a wider circular economy.</p><p>The research conducted in preparation of this presentation as well as the participation at NGU 2020 is funded by the EU-funded HOUSEFUL project (Grant Agreement number 776708).</p><p>HOUSEFUL online: http://houseful.eu/solutions/searching-local-building-material/</p>


2006 ◽  
Vol 58 (08) ◽  
pp. 40-41
Author(s):  
Robert Troy ◽  
Joe Kazen

2021 ◽  
Author(s):  
◽  
George Strang

<p><b>This research is fuelled by the ever-increasing impact of global pollution and climate change, and the role the construction industry plays in it. Vast amounts of construction waste, needless manufacturing of single-use and composite products, and poor construction practices culminate in a linear economy model on which the world operates. It is a problem that can no longer be ignored and must be rectified. This research aims to develop and propose a construction system suitable for deconstruction and continued component reuse, using engineered timber products available in today’s market. The system will be tested against several implementations across a variety of building scales. This research has the intention of enabling component reuse for a circular economy. A circular economy minimises waste produced. Less waste is good.</b></p> <p>The resulting design proposal is a modular and prefabricated braced frame construction system to suit large and small scales, with removable foundations and adaptive spatial planning. Effective separation of building layers is achieved to allow for access, maintenance, and simple disassembly. Traditional Japanese timber joining techniques have also been researched and used to influence component connection design for deconstruction. This research eliminates irreversible fixings such as adhesives, nails, and screws. The system is then tested across commercial, residential, and small-scale implementations to test its feasibility.</p> <p>It will serve as a case study that questions how we think of buildings and value their components. It aims to enable the same components to be useful across multiple building scales, minimising redundancy and waste.</p>


Sign in / Sign up

Export Citation Format

Share Document