scholarly journals An in vitro study to assess bioaccessibility and bioavailability of calcium from blue whiting (Micromesistius poutassou) fish bone powder

Author(s):  
K. Busca ◽  
S. Wu ◽  
S. Miao ◽  
A. Govindan ◽  
C.R. Strain ◽  
...  

The aim of this study was to determine how well calcium-rich mineral extracts derived from blue whiting fish bone powders compare with existing calcium sources (commercially available fish bone supplement, calcium carbonate and milk powder) in terms of physicochemical properties, in vitro bioaccessibility and bioavailability using simulated gastrointestinal tract treatment and a Caco-2 cell culture model. Blue whiting calcium-rich fish bone powders (A to E) were supplied by Bio-marine Ingredients Ireland (BII) and a commercial calcium-rich fish bone powder was used as the positive control F. The BII calcium-rich fish bone powders analysed through atomic emission spectrometry were shown to have similar levels of mineral content in comparison with powder F. Solubility and rheology tests were performed on the rehydrated powders. The pH of BII calcium-rich fish bone powders in water solution (10% w/v) ranged from 6.96 to 9.09 compared to control F (pH 7.33). Following simulated oral, gastric and duodenal in vitro digestion using the COST INFOGEST standardised static adult digestion method, the fish powders A, E and F showed higher values of soluble ionic calcium than rehydrated milk powder. We compared in vitro bioavailability of the powders using the Caco-2 cell line to test the effects of calcium on human colonic epithelial cells, which confirmed that calcium from blue whiting fish bone was more bioavailable than calcium from milk and calcium carbonate. These data indicate that calcium-rich blue whiting fish bone powder compares well with existing calcium sources, in terms of physicochemical properties, bioaccessibility and bioavailability.

Author(s):  
M. Blum ◽  
M. Sayed ◽  
E. M. Mahmoud ◽  
A. Killinger ◽  
R. Gadow ◽  
...  

AbstractThis investigation aims to study a novel biologically derived coating applied on Ti alloy substrates. Obtained from a low-cost fish bone resource, a nanocrystalline hydroxyapatite has been synthesized and converted to an organic suspension. Coating was then manufactured by a high-velocity suspension flame spray process. The microstructure, phase composition, coating thickness, and roughness of hydroxyapatite (HA)-coated samples were studied. The results indicated the presence of both hydroxyapatite and β-tricalcium phosphate phases and the final coating layer was uniform and dense. In vitro bioactivity and biodegradability of the HA/Ti composite samples were estimated by immersion in simulated body fluid. Remarkable reductions in Ca2+ and PO43− ion concentrations were observed as well as low weight loss percentage and a slight variation in the pH value, indicating the generation of an apatite layer on the surface of all studied samples. Scanning electron microscopy, energy-dispersive x-ray analysis, and inductively coupled plasma–optical emission spectrometry confirm these results. Thus biological derived HA coatings are a promising candidate to enhance bioactivity and biodegradability of bone implants. To demonstrate feasibility on commercial medical components, a medical screw was coated and evaluated.


2020 ◽  
Vol 11 ◽  
pp. 285-295 ◽  
Author(s):  
Satheeshkumar Balu ◽  
Manisha Vidyavathy Sundaradoss ◽  
Swetha Andra ◽  
Jaison Jeevanandam

Cuttlefish bones are an inexpensive source of calcium carbonate, which are produced in large amounts by the marine food industry, leading to environmental contamination and waste. The nontoxicity, worldwide availability and low production cost of cuttlefish bone products makes them an excellent calcium carbonate precursor for the fabrication of hydroxyapatite. In the present study, a novel oil-bath-mediated precipitation method was introduced for the synthesis of hydroxyapatite (Hap) nanorods using cuttlefish bone powder as a precursor (CB-Hap NRs). The obtained CB-Hap NRs were investigated using transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD) and thermogravimetric analysis (TGA) techniques to evaluate their physicochemical properties. The crystallite size (20.86 nm) obtained from XRD data and the elemental analysis (Ca/P molar ratio was estimated to be 1.6) showed that the Hap NRs are similar to that of natural human bone (≈1.67). Moreover, the FTIR data confirmed the presence of phosphate as a functional group and the TGA data revealed the thermal stability of Hap NRs. In addition, the antibacterial study showed a significant inhibitory effect of CB-Hap NRs against S. aureus (zone of inhibition – 14.5 ± 0.5 mm) and E. coli (13 ± 0.5 mm), whereas the blood compatibility test showed that the CB-Hap NRs exhibited a concentration-mediated hemolytic effect. These biogenic CB-Hap NRs with improved physicochemical properties, blood compatibility and antibacterial efficacy could be highly beneficial for orthopedic applications in the future.


2018 ◽  
Vol 8 (5) ◽  
pp. 78-84
Author(s):  
Uyen Tran Thi Ngoc ◽  
Nam Nguyen Khac ◽  
Dung Tran Huu

Background: The purpose of the study was to prepare acetylated wheat starches which have amylase hydrolysis resistant capacity to use as functional food supporting for diabetes treatment. Method: Acetate wheat starches were prepared by acetylation reaction of native wheat starch with different mole ratios of acetic anhydride. These starches were determined for the physicochemical properties by 1H-NMR, SEM, X-ray, DSC, solubility and swelling capacity, the resistant capacity by amylase hydrolysis in-vitro. Results: Acetate wheat starches were prepared successfully with the increase in acetyl content and degree of substitution corresponding with the increase of anhydride acetic, which resulted in the change of physicochemical properties of the wheat starches, including constitution, solubility, swelling capacity and contributed to the increase in resistant starch content in the acetate wheat starches. The AC150-9 containing 2.42% acetyl with degree of substitution 0,094 and resistant starch 32,11% is acceptable by FDA guideline about food safety. Conclusion: Acetate wheat starches contain low rate of digestive starch, while containing a higher proportion of resistant starch than natural wheat starch, possessing a high resistance to amylase activities. Thus, it is hope that this kind of starch to control the rapid increase of postprandual blood glucose response for diabetes treatments effectively. Key words: Acetate wheat starch, substitution, DS, RS, amylase


2012 ◽  
Vol 36 (2) ◽  
pp. 314
Author(s):  
Jian-feng LU ◽  
Chang-wei MENG ◽  
Jin LI ◽  
Zi-hui GONG ◽  
Lin LIN ◽  
...  

2018 ◽  
Vol 18 (1) ◽  
pp. 10-15
Author(s):  
Wang Yi-Wei ◽  
He Yong-Zhao ◽  
An Feng-Ping ◽  
Huang Qun ◽  
Zeng Feng ◽  
...  

In this study, Chinese yam starch-water suspension (8%) were subjected to high-pressure homogenization (HPH) at 100 MPa for increasing cycle numbers, and its effect of on the physicochemical properties of the starch was investigated. Results of the polarizing microscope observations showed that the starch granules were disrupted (i.e. greater breakdown value) after HPH treatment, followed by a decrease in cross polarization. After three HPH cycles, the crystallinity of starch decreased, while the crystal type remained unaltered. Meanwhile, the contents of rapidly digestible starch and slowly digestible starch were increased. On the contrary, resistant starch content was decreased. Our results indicate that HPH treatment resulted in reduction of starch crystallinity and increase of starch digestibility.


2019 ◽  
Vol 16 (2) ◽  
pp. 244-257 ◽  
Author(s):  
Marcus Vinicius Nora de Souza ◽  
Cristiane França da Costa ◽  
Victor Facchinetti ◽  
Claudia Regina Brandão Gomes ◽  
Paula Mázala Pacheco

Background: 1,2,3-triazoles are an important class of organic compounds and because of their aromatic stability, they are not easily reduced, oxidized or hydrolyzed in acidic and basic environments. Moreover, 1,2,3-triazole derivatives are known by their important biological activities and have drawn considerable attention due to their variety of properties. The synthesis of this nucleus, based on the click chemistry concept, through the 1,3-dipolar addition reaction between azides and alkynes is a well-known procedure. This reaction has a wide range of applications, especially on the development of new drugs. Methods: The most prominent eco-friendly methods for the synthesis of triazoles under microwave irradiation published in articles from 2012-2018 were reviewed. Results: In this review, we cover some of the recent eco-friendly CuAAC procedures for the click synthesis of 1,2,3-triazoles with remarks to new and easily recoverable catalysts, such as rhizobial cyclic β-1,2 glucan; WEB (water extract of banana); biosourced cyclosophoraose (CyS); egg shell powder (ESP); cyclodextrin (β- CD); fish bone powder; nanoparticle-based catalyst, among others. Conclusion: These eco-friendly procedures are a useful tool for the synthesis of 1,2,3-triazoles, providing many advantages on the synthesis of this class, such as shorter reaction times, easier work-up and higher yields when compared to classical procedures. Moreover, these methodologies can be applied to the industrial synthesis of drugs and to other areas.


Sign in / Sign up

Export Citation Format

Share Document