scholarly journals Gravimetric, electrochemical and surface study on the good’s buffer ionic liquid as corrosion inhibitor for carbon steel in acidic medium

2019 ◽  
Vol 13 (1) ◽  
pp. 4434-4448
Author(s):  
R. Nanthini ◽  
M. I. Mutalib
Keyword(s):  
Carbon Steel ◽  
Corrosion Inhibitor ◽  
Potentiodynamic Polarization ◽  
Steel Surface ◽  
Electrochemical Impedance ◽  
Scanning Electron Micrographs ◽  
Inhibitor Molecule ◽  
Gravimetric Measurements ◽  
Carbon Steel Surface ◽  
Inhibition Performance

This corrosion study assessed the inhibition performance of carbon steel in 1 M of hydrochloric acid (HCl) using Good’s buffer ionic liquids (GBIL) namely 1-Butyl-3-methylimidazolium 2-(N-Morpholino) propane, [BMIM][MOPS] using electrochemical impedance, potentiodynamic polarization, and weight loss (gravimetric) measurements. GBIL are synthesized by the combination of Good's buffer as anion and various organic bases as the cation. The gravimetric measurements exhibit higher reduction in weight for carbon steel exposed to the acidic environment in the absence of corrosion inhibitor (CI) as compared to carbon steel immersed in the presence of inhibitor molecule. Potentiodynamic polarization study indicates that the synthesized inhibitor acted as a mixed type inhibitor. The inhibition efficiency increases with increase in the concentration of [BMIM][MOPS]. Corrosion protection efficiency ranging from 88% to 90% was featured at 800 ppm of CI in the HCl medium. The adsorption of [BMIM][MOPS] on the carbon steel surface was described by the Langmuir's adsorption isotherm. The scanning electron micrographs inspected the morphology of the carbon steel surface exposed to the solution without and with the presence of inhibitor. The result showed that compound effectively suppressed corrosion by the appearance of an improved surface structure of carbon steel with increasing concentration of [BMIM][MOPS].

scholarly journals Some Thiophene Derivatives as Corrosion Inhibitors for Carbon Steel in Hydrochloric Acid

2014 ◽  
Vol 2014 ◽  
pp. 1-15 ◽  
Author(s):  
A. S. Fouda ◽  
A. A. Attia ◽  
A. A. Negm
Keyword(s):  
Weight Loss ◽  
Carbon Steel ◽  
Potentiodynamic Polarization ◽  
Steel Surface ◽  
Electrochemical Impedance ◽  
Electrochemical Techniques ◽  
Effect Of Temperature ◽  
Carbon Steel Surface ◽  
Weight Loss Method ◽  
Thiophene Derivatives

Corrosion inhibitive performance of some thiophene derivatives during the acidic corrosion of carbon steel surface in 1 M HCl was investigated by chemical technique (weight loss) and electrochemical techniques (potentiodynamic polarization, electrochemical frequency modulation, and electrochemical impedance spectroscopy). The effect of temperature on the corrosion rate was investigated by the weight loss method, and some thermodynamic parameters for corrosion and adsorption processes were determined and discussed. The results show that the inhibition efficiency increased with the increase in inhibitor concentration and temperature. The adsorption of thiophene derivatives on the carbon steel surface obeys Langmuir adsorption isotherm. The obtained results indicated that the investigated compounds are chemically adsorbed on the steel surface. Potentiodynamic polarization studies showed that these compounds are mixed-type inhibitors and the results obtained from the techniques are in good agreement.

scholarly journals Theoretical study of a new oxazolidine -5- one derivative as a corrosion inhibitor for carbon steel surface

2021 ◽  
pp. 1396-1403
Author(s):  
Rehab Majed Kubba ◽  
Nada Mohammed Al-Joborry
Keyword(s):  
Carbon Steel ◽  
Corrosion Inhibitor ◽  
Density Functional ◽  
Steel Surface ◽  
Equilibrium Geometry ◽  
Chemical Parameters ◽  
Functional Theory ◽  
Carbon Steel Surface ◽  
Quantum Mechanical Method ◽  
Inhibition Performance

A newly derivative of oxazolidin-5- one namely [2-(2-biphenyl-4-yl-imidazo [1,2-a] pyridine-3-yl)-3-(4-nitro-phenyl)-oxazolidin-5-one (BIPNO5)] was examined as an corrosion inhibitor for carbon steel surface. Quantum mechanical method of Density Functional Theory (DFT) with (B3LYP (6-311++G (2d, 2p)) level of theory was used to calculate the minimize structure, physical properties and inhibition chemical parameters, in vacuum and two solvents (DMSO and H2O), all at equilibrium geometry. The results indicated that the new derivative could adsorb on the surface of carbon steel through the heteroatom, showing that the new inhibitor has good corrosion inhibition performance.

scholarly journals Corrosion inhibition, surface adsorption and computational studies of Momordica charantia extract: a sustainable and green approach

2021 ◽  
Vol 3 (1) ◽  
Author(s):  
Rajesh Haldhar ◽  
Dwarika Prasad ◽  
Divya Kamboj ◽  
Savas Kaya ◽  
Omar Dagdag ◽  
...  
Keyword(s):  
Carbon Steel ◽  
Steel Surface ◽  
Electrochemical Impedance ◽  
Spectroscopic Technique ◽  
Momordica Charantia ◽  
Green Approach ◽  
Carbon Steel Surface ◽  
Weight Loss Method ◽  
Loss Method ◽  
Inhibitory Molecules

AbstractThe aerial parts extract of Momordica charantia plant were used for the corrosion resistance of carbon steel in the acidic medium (0.5 M H2SO4) utilizing weight loss method, Tafel and Electrochemical Impedance Spectroscopy. The state of mixed inhibitor adsorption on the carbon steel surface is shown by potentiodynamic polarization. M. charantia achieved the extraordinary inhibition efficiency of 93.51% at 500 mg/L of inhibitor concentration. Scanning electron microscopy and atomic force microscopy were used to know about the thin layer which was formed on the surface of carbon steel for its protection from corrosion and the adsorption of inhibitor was shown by UV–vis. spectroscopic technique. Fourier Transform Infrared Spectroscopy technique confirmed the existence of functional groups and the heteroatoms exhibit in the inhibitor. Adsorbance by the inhibitory molecules on the carbon steel surface followed the Langmuir adsorption isotherm. Hypothetical investigations (computational) showed a very valuable report. All acquired outcomes ensure that M. charantia extract can procedure an effectual preventing layer and restrict the corrosion procedure.

scholarly journals A Study of N,N-Diethylammonium O,O′-Di(p-methoxyphenyl)dithiophosphate as New Corrosion Inhibitor for Carbon Steel in Hydrochloric Acid Solution

2016 ◽  
Vol 2016 ◽  
pp. 1-8 ◽  
Author(s):  
Chuan Lai ◽  
Bin Xie ◽  
Changlu Liu ◽  
Wan Gou ◽  
Lvshan Zhou ◽  
...  
Keyword(s):  
Carbon Steel ◽  
Hydrochloric Acid ◽  
Corrosion Inhibitor ◽  
Storage Time ◽  
Inhibition Efficiency ◽  
Electrochemical Impedance ◽  
Hydrochloric Acid Concentration ◽  
Carbon Steel Surface ◽  
And Storage ◽  
Mixed Type Inhibitor

N,N-Diethylammonium O,O′-di(p-methoxyphenyl)dithiophosphate (EAPP) as a new corrosion inhibitor was synthesized in the present work. The corrosion inhibition of EAPP in hydrochloric acid for carbon steel was evaluated by potentiodynamic polarization measurements, electrochemical impedance spectroscopy, weight loss measurements, and scanning electron microscopy. The results indicate that the EAPP is mixed type inhibitor, and the adsorption of EAPP on carbon steel surface obeys Langmuir isotherm. In addition, the inhibition efficiency increases with increasing the concentration of inhibitor and decreases with increasing the hydrochloric acid concentration, temperature, and storage time.

Curcumin Decorated Silver Nanoparticles as Bioinspired Corrosion Inhibitor for Carbon Steel

2020 ◽  
Vol 16 ◽  
Author(s):  
Prathamesh G. Joshi ◽  
Dheeraj Singh Chauhan ◽  
Vandana Srivastava ◽  
Mumtaz Ahmad Quraishi
Keyword(s):  
Silver Nanoparticles ◽  
Carbon Steel ◽  
Corrosion Inhibitor ◽  
Potentiodynamic Polarization ◽  
Steel Surface ◽  
Steel Substrate ◽  
Sem Analysis ◽  
Metallic Surface ◽  
Polarization Study ◽  
Sulphamic Acid

Background: Curcumin-stabilized silver nanoparticles (Cur-AgNp) synthesized by a facile chemical method. The synthesized AgNp was, for the first time, used as a bio-derived corrosion inhibitor for carbon steel in the 1M sulphamic acid medium. Methods: The electrochemical studies via impedance spectroscopy, potentiodynamic polarization, and surface analysis are reported in the communication. The maximum inhibition efficiency of 92.87% obtained at 800 mgL-1 . Results: The impedance measurements revealed an elevation in the polarization resistance with growth in the inhibitor concentration, which supports the adsorption and inhibition behavior of Cur-AgNp on the steel surface. The inhibitor functioned by adsorption on the steel surface and obeyed the Langmuir kinetic-thermodynamic isotherm with a mixed mode of physical/ chemical adsorption. The potentiodynamic polarization study revealed cathodic predominating behavior. Conclusion: The SEM analysis depicted the development of a protective inhibitor film on the steel substrate, and FTIRATR analysis of the inhibited steel surface supported the adsorption of the corrosion inhibitor on the metallic surface.

scholarly journals The Inhibitive Effect of 2-Phenyl-3-nitroso-imidazo [1, 2-a]pyridine on the Corrosion of Steel in 0.5 M HCl Acid Solution

2010 ◽  
Vol 7 (s1) ◽  
pp. S35-S42 ◽  
Author(s):  
K. Bouhrira ◽  
F. Ouahiba ◽  
D. Zerouali ◽  
B. Hammouti ◽  
M. Zertoubi ◽  
...  
Keyword(s):  
Carbon Steel ◽  
Steel Surface ◽  
Inhibition Efficiency ◽  
Electrochemical Impedance ◽  
Electrochemical Techniques ◽  
Carbon Steel Surface ◽  
Langmuir Isotherm Model ◽  
Corrosion Of Steel ◽  
Good Agreement

The effect of 2-phenyl-3-nitroso-imidazo[1,2-a]pyridine (PNIP) on the corrosion inhibition of carbon-steel in 0.5 M HCl was studied by weight loss and different electrochemical techniques such as electrochemical impedance spectroscopy (EIS), potentiodynamic polarization. The obtained results showed that PNIP effectively reduces the corrosion rate of carbon steel. Inhibition efficiency (E%) increases with inhibitor concentration to attain 88% at 10-3M. Adsorption of that PNIP on the carbon steel surface in 0.5 M HCl follows the Langmuir isotherm model. E% values obtained from various methods used are in good agreement. SEM characterization of the steel surface is made.

Sign in / Sign up

Export Citation Format

Share Document