scholarly journals Influence of biodiesel blends produced in Colombia on a Diesel engine

2021 ◽  
Vol 15 (3) ◽  
pp. 8428-8439
Author(s):  
Oscar Venegas ◽  
Luisa Mónico
Keyword(s):  
Diesel Engines ◽  
Alternative Fuels ◽  
Engine Performance ◽  
Ease Of Use ◽  
Operating Conditions ◽  
Pollutant Emissions ◽  
The Past ◽  
Selection For ◽  
Vehicle Market ◽  
Palm Oil Biodiesel

Diesel engines have dominated the heavy duty and passenger vehicle market in the past 30 years. Consequently, the oil-derived fuels demand and the amount of pollutant emissions have witnessed exponential growth during the last three decades. Although Diesel engines present the advantage of higher efficiency and, therefore, lower levels of CO2 emissions,  they produce high levels of NOX and particulate matter. In order to face these difficulties, the use of alternative fuels started booming in the early 2000s and continue to gain influence today. Biodiesel stands out from the alternative fuels’ selection for its ease of use, production, storage and potential to reduce levels of particles, CO, HC and CO2. The main goal of this research is to experimentally determine the influence of palm oil biodiesel produced in Colombia on a Diesel engine’s behavior in terms of engine performance and pollutant emissions. As different mixtures of commercial Diesel and biodiesel at different operating conditions were tested, the results showed that it is possible to maintain the engine’s performance at acceptable levels and to, in some cases, reduce smoke density and NOX levels.

Ethers and esters as alternative fuels for internal combustion engine: A review

2021 ◽  
pp. 146808742110464
Author(s):  
Yang Hua
Keyword(s):  
Alternative Fuels ◽  
Combustion Engine ◽  
Combustion Process ◽  
Pressure Rise ◽  
Engine Performance ◽  
Internal Combustion ◽  
Operating Conditions ◽  
Future Research ◽  
Particulate Emissions ◽  
Ic Engine

Ether and ester fuels can work in the existing internal combustion (IC) engine with some important advantages. This work comprehensively reviews and summarizes the literatures on ether fuels represented by DME, DEE, DBE, DGM, and DMM, and ester fuels represented by DMC and biodiesel from three aspects of properties, production and engine application, so as to prove their feasibility and prospects as alternative fuels for compression ignition (CI) and spark ignition (SI) engines. These studies cover the effects of ether and ester fuels applied in the form of single fuel, mixed fuel, dual-fuel, and multi-fuel on engine performance, combustion and emission characteristics. The evaluation indexes mainly include torque, power, BTE, BSFC, ignition delay, heat release rate, pressure rise rate, combustion duration, exhaust gas temperature, CO, HC, NOx, PM, and smoke. The results show that ethers and esters have varying degrees of impact on engine performance, combustion and emissions. They can basically improve the thermal efficiency of the engine and reduce particulate emissions, but their effects on power, fuel consumption, combustion process, and CO, HC, and NOx emissions are uncertain, which is due to the coupling of operating conditions, fuel molecular structure, in-cylinder environment and application methods. By changing the injection strategy, adjusting the EGR rate, adopting a new combustion mode, adding improvers or synergizing multiple fuels, adverse effects can be avoided and the benefits of oxygenated fuel can be maximized. Finally, some challenges faced by alternative fuels and future research directions are analyzed.

scholarly journals Research on the Energy Efficiency Indicators of Transport Diesel Engines under Transient Operation Conditions

Pomorstvo ◽  
2018 ◽  
Vol 32 (2) ◽  
pp. 228-238 ◽  
Author(s):  
Sergejus LebedevasPaulius ◽  
Paulius Rapalis ◽  
Rima Mickevicienė
Keyword(s):  
Diesel Engine ◽  
Diesel Engines ◽  
Engine Performance ◽  
Mechanical Efficiency ◽  
Operating Conditions ◽  
Efficiency Coefficient ◽  
Operation Conditions ◽  
Power Increase ◽  
Control Units ◽  
Additional Equipment

In this study, we have investigated the efficiency of transport diesel engines CAT3512B-HD in transient braking and acceleration modes in 2M62M locomotives. A comparative analysis of the diesel engine performance has been performed at speeds of power increase and braking ranging from 4–5 kW/s to 17–18 kW/s. A decrease in the fuel economy occurred, and the main reason for it (compared with the steady-state operating condition at qcycl = idem) has been found to be the deterioration of the mechanical efficiency coefficient due to the loss of the additional equipment kinetic energy of the engine. The efficiency decreased by 3–3.5% under power increase operations and by 10–14% in the braking modes. The original methodology for the evaluation of the diesel engine parameters registered by the engine control units (ECU) in the engine operating conditions, mathematical modelling application AVL BOOST, and analytical summaries in artificial neural networks (ANNs) have been used. The errors in the obtained results have been 5–8% at a determination coefficient of 0.97–0.99.

Numerical Simulation for the Preliminary Design of Fuel Flexible Stationary Gas Turbine Combustors Using Conventional and Alternative Fuels

2012 ◽  
Author(s):  
Washington Orlando Irrazabal Bohorquez ◽  
João Roberto Barbosa ◽  
Rob Johan Maria Bastiaans ◽  
Philip de Goey
Keyword(s):  
Numerical Simulation ◽  
Gas Turbine ◽  
Gas Turbines ◽  
Alternative Fuels ◽  
High Efficiency ◽  
Numerical Study ◽  
Operating Conditions ◽  
Pollutant Emissions ◽  
Gas Turbine Combustor ◽  
Primary Zone

Currently, high efficiency and low emissions are most important requisites for the design of modern gas turbines due to the strong environmental restrictions around the world. In the past years, alternative fuels have been considered for application in industrial gas turbines. Therefore, combustor performance, pollutant emissions and the ability to burn several fuels became of much concern and high priority has been given to the combustor design. This paper describes a methodology focused on the design of stationary gas turbines combustion chambers with the ability to efficiently burn conventional and alternative fuels. A simplified methodology is used for the calculations of the equilibrium temperature and chemical species in the primary zone of a gas turbine combustor. Direct fuel injection and diffusion flames, together with numerical methods like Newton-Raphson, LU Factorization and Lagrange Polynomials, are used for the calculations. Diesel, ethanol and methanol fuels were chosen for the numerical study. A computer code sequentially calculates the main geometry of the combustor. From the numerical simulation it is concluded that the basic gas turbine combustor geometry, for some operating conditions and burning diesel, ethanol or methanol, are of similar sizes, because the development of aerodynamic characteristics predominate over the thermochemical properties. It is worth to note that the type of fuel has a marked effect on the stability and combustion advancement in the combustor. This can be seen when the primary zone is analyzed under a steady-state operating condition. At full power, the pressure is 1.8 MPa and the temperature 1,000 K at the combustor inlet. Then, the equivalence ratios in the primary zone are 1.3933 (diesel), 1.4352 (ethanol) and 1.3977 (methanol) and the equilibrium temperatures for the same operating conditions are 2,809 K (diesel), 2,754 K (ethanol) and 2,702 K (methanol). This means that the combustor can reach similar flame stability conditions, whereas the combustion efficiency will require richer fuel/air mixtures of ethanol or methanol are burnt instead of diesel. Another important result from the numerical study is that the concentration of the main pollutants (CO, CO2, NO, NO2) is reduced when ethanol or methanol are burnt, in place of diesel.

Set-Point Adaptation Strategy of Air Systems of Light-Duty Diesel Engines for NOx Emission Reduction Under Acceleration Conditions

2018 ◽  
Vol 140 (7) ◽  
Author(s):  
Kyunghan Min ◽  
Haksu Kim ◽  
Manbae Han ◽  
Myoungho Sunwoo
Keyword(s):  
Diesel Engines ◽  
Performance Optimization ◽  
Control Structure ◽  
Engine Performance ◽  
Optimization Method ◽  
Driving Cycle ◽  
Operating Conditions ◽  
Nox Emission ◽  
Exhaust Gas ◽  
Set Point

Modern diesel engines equip the exhaust gas recirculation (EGR) system because it can suppress NOx emissions effectively. However, since a large amount of exhaust gas might cause the degradation of drivability, the control strategy of EGR system is crucial. The conventional control structure of the EGR system uses the mass air flow (MAF) as a control indicator, and its set-point is determined from the well-calibrated look-up table (LUT). However, this control structure cannot guarantee the optimal engine performance during acceleration operating conditions because the MAF set-point is calibrated at steady operating conditions. In order to optimize the engine performance with regard to NOx emission and drivability, an optimization algorithm in a function of the intake oxygen fraction (IOF) is proposed because the IOF directly affects the combustion and engine emissions. Using the NOx and drivability models, the cost function for the performance optimization is designed and the optimal value of the IOF is determined. Then, the MAF set-point is adjusted to trace the optimal IOF under engine acceleration conditions. The proposed algorithm is validated through scheduled engine speeds and loads to simulate the extra-urban driving cycle of the European driving cycle. As validation results, the MAF is controlled to trace the optimal IOF from the optimization method. Consequently, the NOx emission is substantially reduced during acceleration operating conditions without the degradation of drivability.

scholarly journals Benchmarking data from the experience gained in engine performance and emissions testing on alternative fuels for aviation

2017 ◽  
Vol 1 ◽  
pp. S5WGLD ◽  
Author(s):  
Wajid A. Chishty ◽  
Tak Chan ◽  
Pervez Canteenwalla ◽  
Craig R. Davison ◽  
Jennifer Chalmers
Keyword(s):  
Energy Security ◽  
Alternative Fuels ◽  
National Research Council ◽  
Engine Performance ◽  
Performance Testing ◽  
Air Pollutant ◽  
Pollutant Emissions ◽  
Engine Operation ◽  
Commercial Aviation ◽  
Performance And Emissions

Abstract Alternative fuel for aviation has been the centre of serious focus for the last decade, owing mostly to the challenges posed by the price of conventional petroleum fuel, energy security and environmental concerns. The downslide in the oil prices in the recent months and the fact that energy security is not considered a major threat in commercial aviation, these factors have worked negatively for the promotion of alternative fuels. However, the continuous commitment to environmental stewardship by Governments and the industry have kept the momentum going towards the transparent integration of renewable alternatives in the aviation market. On the regulatory side, much progress have been made in the same timeframe with five alternative fuels being certified as synthetic blending components for aviation turbine fuels for use in civil aircraft and engines. Another seven alternative fuels are in the various stages of certification protocol. This progress has been made possible because of the extensive performance testing, both at full engine conditions and at engine components level. This article presents the results of engine performance and air pollutant emissions measurements gathered from the alternative fuels qualification testing conducted at the National Research Council Canada over the last seven years. This benchmarking data was collected on various engine platforms at full engine operation at sea level and/or altitude conditions using a variety of aviation alternative fuels and their blends. In order to provide a reference comparison basis, the results collected using the alternative fuels are compared with baseline Jet-A1 or JP-8 conventional fuels.

A review study on using diethyl ether in diesel engines: Effects on fuel properties, injection, and combustion characteristics

2019 ◽  
Vol 31 (2) ◽  
pp. 179-214 ◽  
Author(s):  
İsmet Sezer
Keyword(s):  
Particulate Matter ◽  
Diesel Engine ◽  
Nitrogen Oxides ◽  
Diethyl Ether ◽  
Diesel Engines ◽  
Alternative Fuels ◽  
Engine Performance ◽  
Fuel Additive ◽  
Fuel Additives ◽  
Review Study

This study was compiled from the results of various researches performed on using diethyl ether as a fuel or fuel additive in diesel engines. Three different techniques are used, the reduction of the harmful exhaust emissions of diesel engines. The first technique for the reduction of harmful emissions has improved the combustion by modification of engine design and fuel injection system, but this process is expensive and time-consuming. The second technique is the use of various exhaust gas devices like catalytic converter and diesel particulate filter. However, the use of these devices affects negatively diesel engine performance. The final technique to reduce emissions and also improve diesel engine performance is the use of various alternative fuels or fuel additives. The major pollutants of diesel engines are nitrogen oxides and particulate matter. It is very difficult to reduce nitrogen oxides and particulate matter emissions simultaneously in practice. Most researches declare that the best way to reduce these emissions is the use of various alternative fuels i.e. natural gas, biogas, biodiesel, or the use of fuel additives with these alternative fuels or conventional diesel fuel. Therefore, it is very important that the results of various studies on alternative fuels or fuel additives are evaluated together for practice applications. Especially, this study focuses on the use of diethyl ether in diesel engines as fuel or fuel additive in various diesel engine fuels. This review study investigates the effects of diethyl ether on the fuel properties, injection, and combustion characteristics.

scholarly journals Modeling of power and torque curves of a diesel at the design stage

2019 ◽  
Vol 126 ◽  
pp. 00052
Author(s):  
Alexander Gots ◽  
Vladimir Klevtsov ◽  
Alexander Lyukhter
Keyword(s):  
Diesel Engines ◽  
Test Bench ◽  
Extreme Values ◽  
Engine Performance ◽  
Operating Conditions ◽  
Design Stage ◽  
Maximum Torque ◽  
Exhaust Gases ◽  
Upper Limit ◽  
Specific Speed

An external speed characteristics outlines the upper limit of the field of possible operating conditions of the engine. With its help, therefore, it is possible to judge the extreme values of the indicators and parameters of the engine when it is running at a specific speed of the crankshaft. It is at theexternal speed characteristics of the engine parts are subjected to the greatest mechanical and thermalloads, the maximum is also the smoke of the exhaust gases of diesel engines. This indicates the particular importance of techniques that allow to determine the performance of the engine in the modes of external speed characteristics. Get external speed characteristics when testing the engine on the test bench. However, this possibility is not always available, especially it is not at the design stage. When calculating the cycle, the engine performance is obtained in two modes – rated power and maximum torque. Therefore, the external speed characteristics, built by calculation is important at the stage of justification of the main indicators and parameters of the designed engine.

Control-Oriented Model Development and Experimental Validation for a Modern Diesel Engine

2020 ◽  
Author(s):  
Kuo Yang ◽  
Pingen Chen
Keyword(s):  
Diesel Engine ◽  
Diesel Engines ◽  
Model Development ◽  
Engine Performance ◽  
Operating Conditions ◽  
Least Square ◽  
Injection Timing ◽  
Model Based ◽  
Wide Range ◽  
Mean Square Errors

Abstract Modern Diesel engines have become highly complex multi-input multi-output systems. Controls of modern Diesel engines to meet various requirements such as high fuel efficiency and low NOx and particulate matter (PM) emissions, remain a great challenge for automotive control community. While model-based controls have demonstrated significant potentials in achieving high Diesel engine performance. Complete and high-fidelity control-oriented Diesel engine models are much needed as the foundations of model-based control system development. In this study, a semi-physical, mean-value control-oriented model of a turbocharged Diesel engine equipped with high-pressure exhaust gas recirculation (EGR) and variable geometry turbocharger (VGT) is developed and experimentally validated. The static calibration of Diesel engine model is achieved with the least-square optimization methodology using the experimental test data from a physical Diesel engine platform. The normalized root mean square errors (NRMSEs) of the calibration results are in the range of 0.1095 to 0.2582. The cross-validation results demonstrated that the model was capable of accurately capturing the engine torque output and NOx emissions with the control inputs of EGR, VGT and Start of Injection timing (SOI) in wide-range operating conditions.

Modelling and Assessment of Compressor Faults on Marine Gas Turbines

2012 ◽  
Author(s):  
I. Roumeliotis ◽  
N. Aretakis ◽  
K. Mathioudakis ◽  
E. A. Yfantis
Keyword(s):  
Gas Turbines ◽  
Engine Performance ◽  
Performance Model ◽  
Operating Conditions ◽  
Pollutant Emissions ◽  
Maximum Speed ◽  
Performance Modelling ◽  
Engine Operation ◽  
Marine Propulsion ◽  
And Performance

Any prime mover exhibits the effects of wear and tear over time, especially when operating in a hostile environment. Marine gas turbines operation in the hostile marine environment results in the degradation of their performance characteristics. A method for predicting the effects of common compressor degradation mechanisms on the engine operation and performance by exploiting the “zooming” feature of current performance modelling techniques is presented. Specifically a 0D engine performance model is coupled with a higher fidelity compressor model which is based on the “stage stacking” method. In this way the compressor faults can be simulated in a physical meaningful way and the overall engine performance and off design operation of a faulty engine can be predicted. The method is applied to the case of a twin shaft engine, a configuration that is commonly used for marine propulsion. In the case of marine propulsion the operating profile includes a large portion of off-design operation, thus in order to assess the engine’s faults effects, the engine operation should be examined with respect to the marine vessel’s operation. For this reason, the engine performance model is coupled to a marine vessel’s mission model that evaluates the prime mover’s operating conditions. In this way the effect of a faulty engine on vessels’ mission parameters like overall fuel consumption, maximum speed, pollutant emissions and mission duration can be quantified.

scholarly journals SI engine performance, lubricant oil deterioration, and emission: A comparison of liquid and gaseous fuel

2020 ◽  
Vol 12 (6) ◽  
pp. 168781402093045
Author(s):  
Muhammad Usman ◽  
Muhammad Wajid Saleem ◽  
Syed Saqib ◽  
Jamal Umer ◽  
Ahmad Naveed ◽  
...  
Keyword(s):  
Energy Consumption ◽  
Natural Gas ◽  
Specific Energy ◽  
Alternative Fuels ◽  
Specific Energy Consumption ◽  
Engine Performance ◽  
Operating Conditions ◽  
Compressed Natural Gas ◽  
Lubricant Oil ◽  
Brake Power

Considering the importance of alternative fuels in IC engines for environment safety, compressed natural gas has been extensively employed in SI engines. However, scarce efforts have been made to investigate the effect of compressed natural gas on engine lubricant oil for a long duration. In this regard, a comprehensive analysis has been made on the engine performance, emissions, and lubricant oil conditions using gasoline ( G)92 and compressed natural gas at different operating conditions using reliable sampling methods. The key parameters of the engine performance like brake power and brake-specific energy consumption were investigated at 80% throttle opening within 1500–4500 range of r/min. For the sake of emission tests, speed was varied uniformly by varying the load at a constant throttle. Furthermore, the engine was run at high and low loads for lubricant oil comparison. Although compressed natural gas showed a decrease in brake-specific energy consumption (7.94%) and emissions content, ( G)92 performed relatively better in the case of brake power (39.93% increase). Moreover, a significant improvement was observed for wear debris, lubricant oil physiochemical characteristics, and additives depletion in the case of compressed natural gas than those of ( G)92. The contents of metallic particles were decreased by 23.58%, 36.25%, 42.42%, and 66.67% for iron, aluminum, copper, and lead, respectively, for compressed natural gas.

Sign in / Sign up

Export Citation Format

Share Document