scholarly journals Benchmarking data from the experience gained in engine performance and emissions testing on alternative fuels for aviation

2017 ◽  
Vol 1 ◽  
pp. S5WGLD ◽  
Author(s):  
Wajid A. Chishty ◽  
Tak Chan ◽  
Pervez Canteenwalla ◽  
Craig R. Davison ◽  
Jennifer Chalmers
Keyword(s):  
Energy Security ◽  
Alternative Fuels ◽  
National Research Council ◽  
Engine Performance ◽  
Performance Testing ◽  
Air Pollutant ◽  
Pollutant Emissions ◽  
Engine Operation ◽  
Commercial Aviation ◽  
Performance And Emissions

Abstract Alternative fuel for aviation has been the centre of serious focus for the last decade, owing mostly to the challenges posed by the price of conventional petroleum fuel, energy security and environmental concerns. The downslide in the oil prices in the recent months and the fact that energy security is not considered a major threat in commercial aviation, these factors have worked negatively for the promotion of alternative fuels. However, the continuous commitment to environmental stewardship by Governments and the industry have kept the momentum going towards the transparent integration of renewable alternatives in the aviation market. On the regulatory side, much progress have been made in the same timeframe with five alternative fuels being certified as synthetic blending components for aviation turbine fuels for use in civil aircraft and engines. Another seven alternative fuels are in the various stages of certification protocol. This progress has been made possible because of the extensive performance testing, both at full engine conditions and at engine components level. This article presents the results of engine performance and air pollutant emissions measurements gathered from the alternative fuels qualification testing conducted at the National Research Council Canada over the last seven years. This benchmarking data was collected on various engine platforms at full engine operation at sea level and/or altitude conditions using a variety of aviation alternative fuels and their blends. In order to provide a reference comparison basis, the results collected using the alternative fuels are compared with baseline Jet-A1 or JP-8 conventional fuels.

scholarly journals A Comparison of Ethanol, Methanol, and Butanol Blending with Gasoline and Its Effect on Engine Performance and Emissions Using Engine Simulation

Processes ◽  
2021 ◽  
Vol 9 (8) ◽  
pp. 1322
Author(s):  
Simeon Iliev
Keyword(s):  
Alternative Fuels ◽  
Fossil Fuels ◽  
Gasoline Engine ◽  
Engine Performance ◽  
Exhaust Emissions ◽  
Engine Simulation ◽  
Engine Model ◽  
Fuel Blends ◽  
Performance And Emissions ◽  
Blended Fuels

Air pollution, especially in large cities around the world, is associated with serious problems both with people’s health and the environment. Over the past few years, there has been a particularly intensive demand for alternatives to fossil fuels, because when they are burned, substances that pollute the environment are released. In addition to the smoke from fuels burned for heating and harmful emissions that industrial installations release, the exhaust emissions of vehicles create a large share of the fossil fuel pollution. Alternative fuels, known as non-conventional and advanced fuels, are derived from resources other than fossil fuels. Because alcoholic fuels have several physical and propellant properties similar to those of gasoline, they can be considered as one of the alternative fuels. Alcoholic fuels or alcohol-blended fuels may be used in gasoline engines to reduce exhaust emissions. This study aimed to develop a gasoline engine model to predict the influence of different types of alcohol-blended fuels on performance and emissions. For the purpose of this study, the AVL Boost software was used to analyse characteristics of the gasoline engine when operating with different mixtures of ethanol, methanol, butanol, and gasoline (by volume). Results obtained from different fuel blends showed that when alcohol blends were used, brake power decreased and the brake specific fuel consumption increased compared to when using gasoline, and CO and HC concentrations decreased as the fuel blends percentage increased.

Assessing Double Injection and Intake Air Temperature Effects on Gasoline HCCI Engine Performance and Emissions Using Fully-Automated Experiments and Micro-Genetic Algorithms

2002 ◽  
Author(s):  
Mustafa Canakci ◽  
Eric Hruby ◽  
Rolf D. Reitz
Keyword(s):  
Air Temperature ◽  
Gasoline Engine ◽  
Engine Performance ◽  
Operating Conditions ◽  
Spray Angle ◽  
Injection Timing ◽  
Engine Operation ◽  
Double Injection ◽  
Performance And Emissions ◽  
Engine Performance And Emissions

Homogeneous charge compression ignition (HCCI) is receiving attention as a new low emission engine concept. Little is known about the optimal operating conditions for this engine operation mode. Combustion at homogeneous, low equivalence ratio conditions results in modest temperature combustion products, containing very low concentrations of NOx and PM as well as providing high thermal efficiency. However, this combustion mode can produce higher HC and CO emissions than those of conventional engines. An electronically controlled Caterpillar single-cylinder oil test engine (SCOTE), originally designed for heavy-duty diesel applications, was converted to a HCCI direct-injection gasoline engine. The engine features an electronically controlled low-pressure common rail injector with a 60°-spray angle that is capable of multiple injections. The use of double injection was explored for emission control, and the engine was optimized using fully-automated experiments and a micro-genetic algorithm (μGA) optimization code. The variables changed during the optimization include the intake air temperature, start of injection timing, and split injection parameters (percent mass of the fuel in each injection, dwell between the pulses). The engine performance and emissions were determined at 700 rev/min with a constant fuel flow rate at 10 MPa fuel injection pressure. The results show that significant emissions reductions are possible with the use of optimal injection strategies.

The University of Tennessee EcoCAR 2 Communications, Outreach, Education and STEM Recruiting Program Overview: Year 2

2013 ◽  
Author(s):  
Katelynn M. Routh ◽  
Scott J. Curran ◽  
David K. Irick
Keyword(s):  
Hybrid Electric Vehicle ◽  
Alternative Fuels ◽  
Air Pollutant ◽  
Pollutant Emissions ◽  
General Motors ◽  
Outreach Program ◽  
Vehicle Performance ◽  
University Of Tennessee ◽  
The University ◽  
Outreach And Education

The U.S. Department of Energy’s (DOE) Advanced Vehicle Technology Competition (AVTC) series is a long running collegiate vehicle design competition for North American universities. The current three year competition series, known as EcoCAR 2: Plugging In To the Future, has students design and build a hybrid electric vehicle (HEV) that also incorporates alternative fuel. Teams are donated a 2013 Chevrolet Malibu by General Motors to modify. A significant aspect of the competition series is the public outreach and education aspect that leverages the expertise of the students in advanced vehicle technologies and alternative fuels. This also highlights the systems level approach to integrating all aspects of the vehicle to build a vehicle that has the best possible fuel economy, lowest well-to-wheel greenhouse gas emissions and lowest criteria air pollutant emissions while maintaining or exceeding vehicle performance, utility and safety. This paper presents an overview of the University of Tennessee’s (Team Tennessee) EcoCAR 2 outreach program, including core program goals and measures of effectiveness of the program for Year 2 of the competition. The paper focuses on the role that such programs can have on effective science, technology, engineering and mathematics recruiting through an overview of the outreach activities and the integration of hands on activities and partnerships with local schools. The leveraging of outreach and education capabilities with the team’s outreach partners is also highlighted.

scholarly journals Experimental Investigation on Ethanol-Petrol Blends Operating with a Petrol Engine: An Overview

2015 ◽  
Vol 773-774 ◽  
pp. 465-469
Author(s):  
Nazrul Atan ◽  
Azizul Mokhtar ◽  
Najib Rahman ◽  
Amir Khalid
Keyword(s):  
Experimental Investigation ◽  
Alternative Fuels ◽  
Gasoline Engine ◽  
Review Paper ◽  
Engine Performance ◽  
Petrol Engine ◽  
New Approach ◽  
Petroleum Price ◽  
Different Types ◽  
Performance And Emissions

The use of biopetrol fuel as alternative fuels in gasoline engine has been around for many years and Ethanol-petrol has the potential to be used as alternative fuel that can reduce the total CO2emission from internal petrol engine. However, the changes of bio-petrol is a very complex and need further understanding for researchers due to the relevance of the increase in the petroleum price and the future environmental regulation. This review paper focuses to ascertain a new approach in potential on ethanol-petrol blends operating with a petrol engine especially the effects of ethanol gas petrol blending ratio and variant types of ethanol on performance and emissions of petrol engine. It is shown that the variant in biopetrol blending ratio and engine operational condition are reduced engine-out emissions and increased efficiency. This paper presents on a review on three different types of ethanol like sugar cane, wheat and corn with various blended rates. Investigation framework study on how to complete the research is also included in this paper.Keywords: biopetrol, petrol engine, performance, emissions, biopetrol fuel properties

Engine Performance and Emissions Formation for RME and Conventional Diesel Oil: A Comparative Study

2009 ◽  
Author(s):  
Junfeng Yang ◽  
Monica Johansson ◽  
Valeri Golovitchev
Keyword(s):  
Diesel Engine ◽  
Comparative Study ◽  
Soot Formation ◽  
Engine Performance ◽  
Oxidation Mechanism ◽  
Diesel Oil ◽  
Engine Operation ◽  
Operation Conditions ◽  
Performance And Emissions ◽  
Engine Performance And Emissions

A comparative study on engine performance and emissions (NOx, soot) formation has been carried out for the Volvo D12C diesel engine fueled by Rapeseed Methyl Ester, RME and conventional diesel oil. The combustion models, used in this paper, are the modifications of those described in [1–2]. After the compilation of liquid properties of RME specified as methyl oleate, C19H36O2, making up 60% of RME. The oxidation mechanism has been compiled based on methyl butanoate ester, mb, C5H10O2 oxidation model [3] supplemented by the sub-mechanisms for two proposed fuel constituent components, methyl decanoate, md, C11H22O2, n-heptane, C7H16, and soot and NOx formations reduced and “tuned” by using the sensitivity analysis. A special global reaction was introduced to “crack” the main fuel into constituent components, md, mb and propyne, C3H4, to reproduce accurately the proposed RME chemical formula. The sub-mechanisms were collected in the general one consisting of 99 species participating in 411 reactions. The combustion mechanism was validated using shock-tube ignition-delay data at diesel engine conditions and flame propagation speeds at atmospheric conditions. The engine simulations were carried out for Volvo D12C engine fueled both RME and conventional diesel oil. The numerical results illustrate that in the case of RME, nearly 100% combustion efficiency was predicted when the cumulative heat release, was compared with the RME LHV, 37.2 kJ/g.. To minimize NOx emissions, the effects of 20–30% EGR levels depending on the engine loads and different injection strategies were analyses. To confirm the optimal engine operation conditions, a special technique based on the time-transient parametric φ-T maps [4] has been used.

scholarly journals Assessment of the Effect of Environmental Conditions on Rotorcraft Pollutant Emissions at Mission Level

2017 ◽  
Author(s):  
Jesus Ortiz-Carretero ◽  
Alejandro Castillo Pardo ◽  
Vassilios Pachidis ◽  
Ioannis Goulos
Keyword(s):  
Environmental Conditions ◽  
Engine Performance ◽  
Pollutant Emissions ◽  
Civil Aviation ◽  
Ambient Conditions ◽  
Engine Operation ◽  
Helicopter Rotors ◽  
Helicopter Flight ◽  
Fuel Burn

It is anticipated that the contribution of rotorcraft activities to the environmental impact of civil aviation will increase in the forthcoming future. Due to their versatility and robustness, helicopters are often operated in harsh environments with extreme ambient conditions and dusty air. These severe conditions affect not only the engine operation but also the performance of helicopter rotors. This impact is reflected in the fuel burn and pollutants emitted by the helicopter during a mission. The aim of this paper is to introduce an exhaustive methodology to quantify the influence of the environment in the mission fuel consumption and the associated emissions of nitrogen oxides (NOx). An Emergency Medical Service (EMS) and a Search and Rescue (SAR) mission were used as a case study to simulate the effects of extreme temperatures, high altitude and compressor degradation on a representative Twin-Engine Medium (TEM) weight helicopter, the Sikorsky UH-60A Black Hawk. A simulation tool for helicopter mission performance analysis developed and validated at Cranfield University was employed. This software comprises different modules that enable the analysis of helicopter flight dynamics, powerplant performance and exhaust emissions over a user defined flight path profile. The results obtained show that the environmental effects on mission fuel and emissions are mainly driven by the modification of the engine performance for the particular missions simulated. Fluctuations as high as 12% and 40% in mission fuel and NOx emissions, respectively, were observed under the environmental conditions simulated in the present study.

Modelling and Assessment of Compressor Faults on Marine Gas Turbines

2012 ◽  
Author(s):  
I. Roumeliotis ◽  
N. Aretakis ◽  
K. Mathioudakis ◽  
E. A. Yfantis
Keyword(s):  
Gas Turbines ◽  
Engine Performance ◽  
Performance Model ◽  
Operating Conditions ◽  
Pollutant Emissions ◽  
Maximum Speed ◽  
Performance Modelling ◽  
Engine Operation ◽  
Marine Propulsion ◽  
And Performance

Any prime mover exhibits the effects of wear and tear over time, especially when operating in a hostile environment. Marine gas turbines operation in the hostile marine environment results in the degradation of their performance characteristics. A method for predicting the effects of common compressor degradation mechanisms on the engine operation and performance by exploiting the “zooming” feature of current performance modelling techniques is presented. Specifically a 0D engine performance model is coupled with a higher fidelity compressor model which is based on the “stage stacking” method. In this way the compressor faults can be simulated in a physical meaningful way and the overall engine performance and off design operation of a faulty engine can be predicted. The method is applied to the case of a twin shaft engine, a configuration that is commonly used for marine propulsion. In the case of marine propulsion the operating profile includes a large portion of off-design operation, thus in order to assess the engine’s faults effects, the engine operation should be examined with respect to the marine vessel’s operation. For this reason, the engine performance model is coupled to a marine vessel’s mission model that evaluates the prime mover’s operating conditions. In this way the effect of a faulty engine on vessels’ mission parameters like overall fuel consumption, maximum speed, pollutant emissions and mission duration can be quantified.

scholarly journals Public Value of Marine Biodiesel Technology Development in South Korea

2018 ◽  
Vol 10 (11) ◽  
pp. 4252 ◽  
Author(s):  
Joseph Kim ◽  
Hyo-Jin Kim ◽  
Seung-Hoon Yoo
Keyword(s):  
Greenhouse Gas ◽  
Energy Security ◽  
Power Plants ◽  
Technology Development ◽  
Air Pollutant ◽  
Pollutant Emissions ◽  
Public Value ◽  
South Korean Government ◽  
The Public ◽  
South Korean

Biodiesel (BD) is often regarded as a carbon-neutral fuel. Many countries are investing resources in biodiesel technology development to respond to the need to improve energy sustainability and the threat of climate change. Since 2009, the South Korean Government has invested a considerable amount of money in developing marine BD (MBD) technology that converts carbon dioxide into diesel using marine microalgae cultivated in large quantities with the help of waste heat from nuclear power plants and/or coal-fired power plants. If the development is successful, 4800 tons of MBD a year, approximately 1820 cars fully fueled annually, will be produced from 2019. Furthermore, the South Korean Government is expected to continue to invest in MBD to improve the market share after 2019. Quantitative information about the public value of MBD technology development is widely demanded by the Government. This study aims to investigate the public value of MBD technology, the attributes of which it considers to be the reduction of greenhouse gas emissions, the mitigation of air pollutant emissions, new job creation, and the improvement of energy security. A choice experiment (CE) survey of 600 people was conducted during July 2016. The trade-offs among the attributes and the price were evaluated in the survey. The CE data were examined through a multinomial logit model. The marginal values for a 1%p reduction of greenhouse gas emissions, 1%p mitigation of air pollutant emissions, the creation of 100 new jobs, and an improvement of energy security caused by MBD technology development are computed to be KRW 1082.7 (USD 0.9), 918.1 (0.8), and 258.3 (0.2) per household per month, respectively.

Analysis of the Combustion Process in a EURO III Heavy-Duty Direct Injection Diesel Engine

2002 ◽  
Vol 124 (3) ◽  
pp. 636-644 ◽  
Author(s):  
J. M. Desantes ◽  
J. V. Pastor ◽  
J. Arre`gle ◽  
S. A. Molina
Keyword(s):  
High Speed ◽  
Direct Injection ◽  
Combustion Process ◽  
Engine Performance ◽  
Injection Pressure ◽  
Pollutant Emissions ◽  
Injection Timing ◽  
Engine Operation ◽  
Operation Conditions ◽  
Representative Points

To fulfill the commitments of future pollutant regulations, current development of direct injection (DI) Diesel engines requires to improve knowledge on the injection/combustion process and the effect of the injection parameters and engine operation conditions upon the spray and flame characteristics and how they affect engine performance and pollutant emissions. In order to improve comprehension of the phenomena inherent to Diesel combustion, a deep experimental study has been performed in a single-cylinder engine with the main characteristics of a six-cylinder engine passing the EURO III legislation. Some representative points of the 13-mode engine test cycle have been considered modifying the nominal values of injection pressure, injection load, intake pressure, engine speed, and injection timing. The study combines performance and emissions experimental measurements together with heat release law (HRL) analysis and high-speed visualization. Controlling parameters for BSFC, NOx, and soot emissions are identified in the last part of the paper.

scholarly journals Assessment of Microalgae Oil as a Carbon-Neutral Transport Fuel: Engine Performance, Energy Balance Changes, and Exhaust Gas Emissions

2021 ◽  
Vol 13 (14) ◽  
pp. 7878
Author(s):  
Mantas Felneris ◽  
Laurencas Raslavičius ◽  
Saugirdas Pukalskas ◽  
Alfredas Rimkus
Keyword(s):  
Pressure Rise ◽  
Engine Performance ◽  
Performance Testing ◽  
Exhaust Gas ◽  
Engine Operation ◽  
Performance And Emission ◽  
Microalgae Oil ◽  
Ci Engine ◽  
Smoke Opacity ◽  
Energy Balances

Notwithstanding the substantial progress acheved since 2010 in the attempts to realize the potential of microalgae biofuels in the transportation sector, the prospects for commercial production of CO2-neutral biofuels are more challenging today than they were in 2010. Pure P. moriformis microalgae oil was subjected to unmodified engine performance testing as a less investigated type of fuel. Conventional diesel was used as a reference fuel to compare and to contrast the energy balances of an engine as well as to juxtapose performance and emission indicators for both unary fuels. According to the methodology applied, the variation of BSFC rates, BTE, smoke opacity, NOx, HC, CO2, O2, and exhaust gas temperature on three different loads were established during compression ignition (CI) engine operation at EGR Off, 25% EGR, 18% EGR and 9% EGR modes, respectively. Simulation model (AVL Boost/BURN) was employed to assess the in-cylinder process parameters (pressure, pressure rise, temperature, temperature rise, ROHR, and MFB). Furthermore, the first law energy balances for an engine running on each of the test fuels were built up to provide useful insights about the peculiarities of energy conversion. Not depending on EGR mode applied, the CI engine running on microalgae oil was responsible for slightly higher BTE values, drastically reduced smoke opacity, higher CO2 values, and smaller O2 concentration, marginally increased NOx levels and lower total energy losses (in %) if compared to the performance with diesel fuel.

Sign in / Sign up

Export Citation Format

Share Document