Frogger

PEDIATRICS ◽  
1991 ◽  
Vol 88 (4) ◽  
pp. 868-870
Author(s):  
MARK D. WIDOME

"I see nobody on the road," said Alice. "I only wish I had such eyes," the King remarked in a fretful tone. "To be able to see Nobody! And at that distance too!" —Through the Looking-Glass "Frogger," the video game, is now a classic. The game is played from the frog's point of view. Video frogs must cross the road, negotiating lanes of increasingly hostile traffic. Many frogs get squished. When you run out of frogs, you push the reset button and play again. Rivara,1 in this issue of Pediatrics, reports on an ambitious effort to educate early elementary schoolage children on the rudiments of traffic safety.

1949 ◽  
Vol 22 (3) ◽  
pp. 838-862 ◽  
Author(s):  
T. R. Griffith ◽  
E. B. Storey ◽  
J. W. D. Barkley ◽  
F. M. McGilvray

Abstract In development work on GR-S commercial recapping compounds originated in 1943 by the Directorate of Mechanical Engineering, Department of National Defence, Ottawa, Canada, in which an attempt was made to correlate road performance with physical properties as determined in the laboratory, it was found that no relationship whatever existed between the results of road tests carried out under the supervision of that directorate and standard laboratory abrasion resistance tests carried out in the Canadian National Research Council Rubber Laboratory at Ottawa. In the laboratory test the sandpaper in the abrasion machine became coated with a smear of tacky viscous material which the air jet was unable to remove. Under these conditions the rubber tends to slide over the sandpaper surface, with relatively little actual abrasion of the rubber. The effect remains even after a considerable overcure of the sample. It was felt that the removal of the tacky viscous material from vulcanized GR-S by extraction might give more reliable abrasion resistance results, inasmuch as, on the road, rubber is constantly coming in contact with a new surface and such viscous material is thus being continually removed as it migrates to the surface of the rubber. From this point of view, then, the tread surface while being abraded on the road may be looked upon as extracted rubber and may be considered as conforming closely to the extracted laboratory specimen.


Author(s):  
Tomislav Petrović ◽  
Miloš Milosavljević ◽  
Milan Božović ◽  
Danislav Drašković ◽  
Milija Radović

The application of intelligent transport systems (hereinafter ITSs) on roads enables continuous monitoring of road users during a whole year with the aim to collect good-quality data based on which the more complex analyses could be done, such as monitoring of certain traffic safety indicators. Automatic traffic counters are one of the most commonly implemented ITSs for collecting traffic flow parameters that are relevant for traffic management on state roads in Republic of Serbia. This paper presents one of the possible ways to collect, analyze and present data on road users’ speeds using automatic traffic counters, where certain traffic safety indicators are analyzed in terms of road users’ compliance with the speed limit on the road section from Mali Pozarevac to Kragujevac. Based on the analyses of data downloaded from automatic traffic counters, it is observed that an extremely high percentage of vehicles drive at speed higher than the speed limit, indicating clearly to higher traffic accident risk, as well as to the need for a tendency to implement speed management on roads using ITS in the forthcoming period.


2021 ◽  
Vol 67 (4) ◽  
pp. 1-8
Author(s):  
Jacob Adedayo Adedeji ◽  
Xoliswa Feikie

Road traffic fatality is rated as one of the ten causes of death in the world and with various preventive measures on a global level, this prediction is only placed on flat terrain and didn’t reduce. Nevertheless, road users’ communication is an essential key to traffic safety. This communication, be it formal or informal between the road users is an important factor for smooth traffic flow and safety. Communication language on roads can be categorized into; formal device-based signal (formal signal), formal hand signal (formal signal), informal device-based signal (informal signal), and informal gesture-based signal (everyday signal). However, if the intent of the message conveys is not properly understood by the other road user, mistakes and errors may set in. Overall, the formal signal is based on explicit learning which occurs during the driving training and the license testing process and the informal, implicit learning occur during the actual driving process on the road unintentionally. Furthermore, since the informal signal is not a prerequisite to driving or taught in driving schools, novice drivers are clueless and thus, might have contributed to errors and mistakes which leads to traffic fatalities. Therefore, this study seeks to document the informal means of communication between drivers on South African roads. Consequently, a qualitative semi-structured interview questionnaire would be used in the collection of informal signals, which were predominantly used on South African roads from driving instructors and thereafter, a focus group of passengers’ car, commercial and truck drivers will be used to validate the availability and their understanding of these informal signals using a Likert-type scale for the confidence level. In conclusion, the information gathered from this study will help improve road safety and understanding of road users especially drivers on the necessity of communication and possible adaptation for other developing countries.


2018 ◽  
Vol 1 (3) ◽  
pp. 667-678
Author(s):  
Mulyadi Mulyadi ◽  
Muhammad Isya ◽  
Sofyan M. Saleh

Abstract: Blangkejeren - Lawe Aunan road conditions overall is on the slopes of the mountains which is strongly influenced by local environmental factors such as drainage, topography, soil conditions, material conditions and vehicle load conditions across the road. It should be noted in order to avoid a decrease in the road quality due to road surface damage that can affect the traffic safety, comfort and smoothness.. Therefore, it is necessary to study the evaluation of the condition of the damaged road surface and the local factors that affect the damage in order to avoid a decrease in the roads quality. This study took place on Blangkejeren - Lawe Aunan roads started from Sta. 529 + 700 - Sta. 535 + 206. Generally, the condition of roads in this segment were found damage that disturb the comfort, smoothness and safety of the roads users. In this study, the primary data obtained by actual surveys in the form of data field length, width, area, and depth of each type of damage as well as local factors that lead to such damage. Actual field surveys conducted along the 5.506 km, with the distance interval of each segment is 100 m. The secondary data obtained from the relevant institutions and other materials related to this research. This study analyzed the PCI method (Pavement Condition Index) to obtain the level of damage in order to know how to handle, while for the identification of the damage done by observation factors descriptively appropriate observation in the field such as the number of damage points. The results of this study found that the type of damage caused to roads is damage to the cover layer, a hole, and curly. This type of damage that commonly occurs on the road Blangkejeren - Lawe Aunan is damage to the edges with a percentage of 87.30%. The local factors that greatly affect drainage on the percentage of damage is 62.00%. PCI average value is 13.47 which indicates a very bad condition (very poor) and requires maintenance or improvement of reconstruction.Abstrak: Kondisi jalan Blangkejeren – Lawe Aunan secara keseluruhan berada di lereng pegunungan sangat dipengaruhi oleh faktor lingkungan setempat seperti drainase, topografi, kondisi tanah, kondisi material dan kondisi beban kendaraan yang melintasi jalan tersebut. Hal ini perlu diperhatikan agar tidak terjadi penurunan kualitas jalan akibat kerusakan permukaan jalan sehingga dapat mempengaruhi keamanan, kenyamanan, dan kelancaran dalam berlalu lintas. Oleh karena itu, perlu dilakukan penelitian evaluasi terhadap kondisi permukaan jalan yang mengalami kerusakan serta faktor setempat yang mempengaruhi kerusakan tersebut agar tidak terjadi penurunan kualitas jalan. Penelitian ini mengambil lokasi di ruas jalan Blangkejeren – Lawe Aunan yang dimulai dari Sta. 529+700 - Sta. 535+206. Umumnya kondisi ruas jalan pada segmen ini banyak ditemukan kerusakan-kerusakan yang dapat mengganggu kenyamanan, kelancaran, dan keamanan pengguna jalan. Dalam penelitian ini data primer diperoleh dengan melakukan survei aktual lapangan yaitu berupa data panjang, lebar, luasan, dan kedalaman tiap jenis kerusakan serta faktor setempat yang mengakibatkan kerusakan tersebut. Survei aktual lapangan dilakukan sepanjang 5,506 km, dengan jarak interval setiap segmen adalah 100 m. Adapun data sekunder diperoleh dari lembaga terkait dan bahan lainnya yang berhubungan dengan penelitian ini. Penelitian ini dianalisis dengan metode PCI (Pavement Condition Index) untuk mendapatkan tingkat kerusakan agar diketahui cara penanganannya, sedangkan untuk identifikasi faktor kerusakannya dilakukan dengan pengamatan secara diskriptif sesuai hasil pengamatan di lapangan berupa jumlah titik kerusakan. Hasil penelitian ini didapatkan bahwa jenis kerusakan yang terjadi pada ruas jalan adalah kerusakan lapisan penutup, lubang, dan keriting. Jenis kerusakan yang umum terjadi pada ruas jalan Blangkejeren – Lawe Aunan adalah kerusakan tepi dengan persentase 87,30 %. Faktor setempat yang sangat mempengaruhi kerusakan adalah drainase dengan persentase 62,00%. Nilai PCI rata-rata yaitu 13,47 yang menunjukkan kondisi sangat buruk (very poor) dan memerlukan pemeliharaan peningkatan atau rekonstruksi.


2021 ◽  
pp. 38-40
Author(s):  
А.Р. Исмагилова

В статье раскрываются полномочия сотрудников подразделений пропаганды Государственной инспекции безопасности дорожного движения в целях профилактики дорожно-транспортных происшествий и травматизма на дороге. The article reveals the powers of the employees of the propaganda units of the State Traffic Safety Inspectorate in order to prevent road accidents and injuries on the road.


2019 ◽  
pp. 480-499
Author(s):  
Syed Abidur Rahman ◽  
Noor Hazlina Ahmad ◽  
Seyedeh Khadijeh Taghizadeh

Entrepreneurship has been deliberated as multidimensional and multidisciplinary study. From the economic point of view entrepreneurship is the central force for economic development for any nation. Scholars and policy makers now have started to see entrepreneurship as panacea for inclusive growth. Entrepreneurships are most widely popular and discussed area. Study on small and medium sized enterprises (SMEs) has been maturing for the last decade as it has been regarded as significant player for the social development along with the economic development. In Bangladesh, SMEs account for a large proportion of the total establishments in various sectors. Considering the importance of the SME sector in Bangladesh, this study intends to explore and sketch-out the landscape of current SME setting in Bangladesh. With this aim the study has extensively carried out literature review, observed and understood the secondary data obtained from various organizations, and finally presented a policy driven recommendation (micro and macro level) which would enable to develop the SME sector in a developing country like Bangladesh.


Author(s):  
Zhenyao Zhang ◽  
Jianying Zheng ◽  
Hao Xu ◽  
Xiang Wang

The problem of traffic safety has become increasingly prominent owing to the increase in the number of cars. Traffic accidents often occur in an instant, which makes it necessary to obtain traffic data with high resolution. High-resolution micro traffic data (HRMTD) indicates that the spatial resolution reaches the centimeter level and that the temporal resolution reaches the millisecond level. The position, direction, speed, and acceleration of objects on the road can be extracted with HRMTD. In this paper, a LiDAR sensor was installed at the roadside for data collection. An adjacent-frame fusion method for vehicle detection and tracking in complex traffic circumstances is presented. Compared with the previous research, objects can be detected and tracked without object model extraction or a bounding box description. In addition, problems caused by occlusion can be improved using adjacent frames fusion in the vehicle detection and tracking algorithms in this paper. The data processing procedure are as follows: selection of area of interest, ground point removal, vehicle clustering, and vehicle tracking. The algorithm has been tested at different sites (in Reno and Suzhou), and the results demonstrate that the algorithm can perform well in both simple and complex application scenarios.


2020 ◽  
Vol 2020 ◽  
pp. 1-18
Author(s):  
Tolesa Hundesa Muleta ◽  
Legesse Lemecha Obsu

In this paper, the analyses of traffic evolution on the road network of a roundabout having three entrances and three exiting legs are conducted from macroscopic point of view. The road networks of roundabouts are modeled as a merging and diverging types 1×2 and 2×1 junctions. To study traffic evolution at junction, two cases have been considered, namely, demand and supply limited cases. In each case, detailed mathematical analysis and numerical tests have been presented. The analysis in the case of demand limited showed that rarefaction wave fills the portion of the road network in time. In the contrary, in supply limited case, traffic congestion occurs at merging junctions and shock wave propagating back results in reducing the performance of a roundabout to control traffic dynamics. Also, we illustrate density and flux profiles versus space discretization at different time steps via numerical simulation with the help of Godunov scheme.


Electronics ◽  
2019 ◽  
Vol 8 (3) ◽  
pp. 341 ◽  
Author(s):  
Miha Ambrož ◽  
Uroš Hudomalj ◽  
Alexander Marinšek ◽  
Roman Kamnik

Measuring friction between the tyres of a vehicle and the road, often and on as many locations on the road network as possible, can be a valuable tool for ensuring traffic safety. Rather than by using specialised equipment for sequential measurements, this can be achieved by using several low-cost measuring devices on vehicles that travel on the road network as part of their daily assignments. The presented work proves the hypothesis that a low cost measuring device can be built and can provide measurement results comparable to those obtained from expensive specialised measuring devices. As a proof of concept, two copies of a prototype device, based on the Raspberry Pi single-board computer, have been developed, built and tested. They use accelerometers to measure vehicle braking deceleration and include a global positioning receiver for obtaining the geolocation of each test. They run custom-developed data acquisition software on the Linux operating system and provide automatic measurement data transfer to a server. The operation is controlled by an intuitive user interface consisting of two illuminated physical pushbuttons. The results show that for braking tests and friction coefficient measurements the developed prototypes compare favourably to a widely used professional vehicle performance computer.


2012 ◽  
Vol 18 (Suppl 1) ◽  
pp. A192.3-A192
Author(s):  
C Jennissen ◽  
C Buresh ◽  
K Harland ◽  
D Ellis ◽  
G Denning

Sign in / Sign up

Export Citation Format

Share Document