scholarly journals Estimating shear wave velocity using acceleration data in Antakya (Turkey)

2015 ◽  
Vol 18 (2) ◽  
pp. 99-105 ◽  
Author(s):  
Aydın Buyuksarac ◽  
Semir Over ◽  
Mehmet Cemal Genes ◽  
Murat Bikce ◽  
Selcuk Kacin ◽  
...  
Keyword(s):  
Wave Velocity ◽  
Site Response ◽  
Free Field ◽  
Soil Conditions ◽  
Response Analysis ◽  
Seismic Velocities ◽  
Seismic Wave Velocity ◽  
Velocity Models ◽  
Acceleration Data ◽  
Joint Research Project

<p>This manuscript presents a site response analysis and an estimation of S-wave velocity that are dependent on acceleration data. First, existing data, such as density, seismic wave velocity, and soil cross-sections, are obtained from previous seismic microzonation studies and used to prepare input data for a suite of MATLAB routines, which are referred to as SUA software. Acceleration data are obtained from four free-field strong-motion stations of the SERAMAR project, which was conducted between 2006 and 2009 in conjunction with a Turkish-German joint research project, and inputted into the software as basic data. The results include a 1D velocity cross-section versus depth and an amplification model of the site. Three different depth levels can be determined for the ranges of 0-5 m, 5-15 m and 15-25 m. The seismic velocities vary between 380 and 470 m s-1 for the first 5 m; 320 and 480 m s-1 for 5-15 m; and 470 and 750 m s-1 for 15-25 m. These results are comparable with the amplification values from the microtremor data from previous studies. The 1D velocity models are appropriate for the soil conditions.</p><p><strong><br /></strong></p><p><strong>Resumen</strong></p><p>Este trabajo presenta el análisis a una respuesta de sitio y una estimación de la velocidad de la onda de corte que son dependientes de la información de aceleración. Los datos adicionales como la densidad, la velocidad de onda sísmica y los cortes transversales de suelo, se obtuvieron de estudios previos de microzonificación sísmica y se utilizaron para preparar el registro de datos en una plataforma de rutinas MATLAB, que se refieren al software SUA. Los datos de información de la aceleración se tomaron de cuatro estaciones de monitoreo de movimientos fuertes a campo abierto del proyecto SERAMAR, que se realizó entre 2006 y 2009 en una investigación conjunta turco-alemana, y se ingresaron en el programa como la información básica. Los resultados incluyen una sección cruzada de velocidad 1D versus profundidad y el modelo amplificado del sitio. Se pudieron determinar tres niveles diferentes a partir de los rangos de 0-5 m, 5-15 m y 15-25 m. Las velocidades sísmicas pueden variar entre 380 y 470 m s-1 para los primeros 5 metros; 320 y 480 m s-1 para el rango 5-15 m, y 450 y 750 m s-1 para el rango 15-25 m. Estos resultados son comparables con los valores de amplificación del perfil Microtemor de estudios previos. Los modelos de velocidad 1D son apropiados para las condiciones del suelo.</p>

Simplified Criteria to Select Ground Response Analysis Methods for Seismic Building Design: Equivalent Linear versus Nonlinear Approaches

2021 ◽  
Author(s):  
Mauro Aimar ◽  
Sebastiano Foti
Keyword(s):  
Seismic Waves ◽  
Site Response ◽  
Building Design ◽  
Soil Conditions ◽  
Response Analysis ◽  
Depth Range ◽  
Ground Response Analysis ◽  
Equivalent Linear ◽  
Acceleration Time Histories ◽  
Soil Deposits

ABSTRACT The possible amplification of seismic waves in soil deposits is crucial for the seismic design of buildings and geotechnical systems. The most common approaches for the numerical simulation of seismic site response are the equivalent linear (EQL) and the nonlinear (NL). Even though their advantages and limitations have been investigated in several studies, the relative field of applicability is still under debate. This study tested both methods over a wide population of soil models, which were subjected to a set of acceleration time histories recorded from strong earthquakes. A thorough comparison of the results of the EQL and the NL approaches was carried out, to identify the conditions in which the relative differences are significant. This assessment allowed for the definition of simplified criteria to predict when the two schemes are or are not compatible for large expected shaking levels. The proposed criteria are based on simple and intuitive parameters describing the soil deposit and the ground-motion parameters, which can be predicted straightforwardly. Therefore, this study provides a scheme for the choice between the EQL and the NL approaches that can be used even at the preliminary design stages. It appears that the EQL approach provides reliable amplification estimates in soil deposits with thickness up to 30 m, except for very deformable soils, but this depth range may be extended at long vibration periods. This result reveals a good level of reliability of the EQL approach for various soil conditions encountered in common applications, even for high-intensity shaking.

scholarly journals Investigating the influence of topographic irregularities and two-dimensional effects on surface ground motion intensity with one- and two-dimensional analyses

2014 ◽  
Vol 14 (7) ◽  
pp. 1773-1788 ◽  
Author(s):  
G. Ç. İnce ◽  
L. Yılmazoğlu
Keyword(s):  
Ground Motion ◽  
Site Response ◽  
Soil Conditions ◽  
Response Analysis ◽  
Two Dimensional ◽  
Ground Acceleration ◽  
Equivalent Linear ◽  
Local Soil ◽  
Different Depths ◽  
Earthquake Response Analysis

Abstract. In this work, the surface ground motion that occurs during an earthquake in ground sections having different topographic forms has been examined with one and two dynamic site response analyses. One-dimensional analyses were undertaken using the Equivalent-Linear Earthquake Response Analysis (EERA) program based on the equivalent linear analysis principle and the Deepsoil program which is able to make both equivalent linear and nonlinear analyses and two-dimensional analyses using the Plaxis 8.2 software. The viscous damping parameters used in the dynamic site response analyses undertaken with the Plaxis 8.2 software were obtained using the DeepSoil program. In the dynamic site response analyses, the synthetic acceleration over a 475-year return period representing the earthquakes in Istanbul was used as the basis of the bedrock ground motion. The peak ground acceleration obtained different depths of soils and acceleration spectrum values have been compared. The surface topography and layer boundaries in the 5-5' cross section which cuts across the study area west to east were selected in order to examine the effect of the land topography and layer boundaries on the analysis results, and were flattened and compared with the actual status. The analysis results showed that the characteristics of the surface ground motion change in relation to the varying local soil conditions and land topography.

Estimation Study on Shear Wave Velocity of Seabed Using GRNN

2014 ◽  
Vol 580-583 ◽  
pp. 264-267
Author(s):  
Sheng Jie Di ◽  
Zhi Gang Shan ◽  
Xue Yong Xu
Keyword(s):  
Shear Wave ◽  
Wave Velocity ◽  
Shear Wave Velocity ◽  
Seismic Analysis ◽  
Site Response ◽  
Estimation Method ◽  
Response Analysis ◽  
Generalized Regression Neural Network ◽  
Engineering Practice ◽  
Site Classification

Characterization of the shear wave velocity of soils is an integral component of various seismic analysis, including site classification, hazard analysis, site response analysis, and soil-structure interaction. Shear wave velocity at offshore sites of the coastal regions can be measured by the suspension logging method according to the economic applicability. The study presents some methods for estimating the shear wave velocity profiles in the absence of site-specific shear wave velocity data. By applying generalized regression neural network (GRNN) for the estimation of in-situ shear wave velocity, it shows good performances. Therefore, this estimation method is worthy of being recommended in the later engineering practice.

Improved Approach for Modeling Nonlinear Site Response of Highly Strained Soils: Case Study of the Service Hall Array in Japan

2016 ◽  
Vol 32 (2) ◽  
pp. 1055-1074 ◽  
Author(s):  
Ramin Motamed ◽  
Kevin Stanton ◽  
Ibrahim Almufti ◽  
Kirk Ellison ◽  
Michael Willford
Keyword(s):  
Nuclear Power ◽  
Site Response ◽  
Free Field ◽  
Peak Strength ◽  
Response Analysis ◽  
Soil Behavior ◽  
Backbone Curve ◽  
Ground Response Analysis ◽  
Nonlinear Site Response ◽  
Highly Strained

A nonlinear ground response analysis is conducted for the Niigata-ken Chuetsu-oki earthquake recorded at a free-field vertical array near the Kashiwazaki-Kariwa Nuclear Power Plant in Japan. A bidirectional site response analysis is carried out using LS-DYNA which allows user defined stress-strain relationships to dictate soil behavior subjected to dynamic loading. Dynamic soil behavior is characterized using a two-stage hyperbolic backbone curve implemented with modifications to consider the peak strength of soil layers as well as the strain at which the peak strength is fully mobilized. The effects of bidirectional input motions, strain rate, and the shape of the shear modulus degradation curves are investigated, and it is demonstrated that each factor can have a significant influence on the results.

scholarly journals Parametric Study of Local Site Response for Bedrock Ground Motion to Earthquake in Phuentsholing, Bhutan

2020 ◽  
Vol 12 (13) ◽  
pp. 5273 ◽  
Author(s):  
Karma Tempa ◽  
Raju Sarkar ◽  
Abhirup Dikshit ◽  
Biswajeet Pradhan ◽  
Armando Lucio Simonelli ◽  
...  
Keyword(s):  
Shear Wave ◽  
Ground Motion ◽  
Wave Velocity ◽  
Shear Wave Velocity ◽  
Soil Profile ◽  
Parametric Study ◽  
Site Response ◽  
Site Response Analysis ◽  
Response Analysis ◽  
Geophysical Study

Earthquakes, when it comes to natural calamities, are characteristically devastating and pose serious threats to buildings in urban areas. Out of multiple seismic regions in the Himalayas, Bhutan Himalaya is one that reigns prominent. Bhutan has seen several moderate-sized earthquakes in the past century and various recent works show that a major earthquake like the 2015 Nepal earthquake is impending. The southwestern city of Bhutan, Phuentsholing is one of the most populated regions in the country and the present study aims to explore the area using geophysical methods (Multispectral Analysis of Surface Waves (MASW)) for understanding possibilities pertaining to infrastructural development. The work involved a geophysical study on eight different sites in the study region which fall under the local area plan of Phuentsholing City. The geophysical study helps to discern shear wave velocity which indicates the soil profile of a region along with possible seismic hazard during an earthquake event, essential for understanding the withstanding power of the infrastructure foundation. The acquired shear wave velocity by MASW indicates visco-elastic soil profile down to a depth of 22.2 m, and it ranged from 350 to 600 m/s. A site response analysis to understand the correlation of bedrock rigidness to the corresponding depth was conducted using EERA (Equivalent-linear Earthquake Site Response Analysis) software. The amplification factors are presented for each site and maximum amplification factors are highlighted. These results have led to a clear indication of how the bedrock characteristics influence the surface ground motion parameters for the corresponding structure period. The results infer that the future constructional activity in the city should not be limited to two- to five-story buildings as per present practice. Apart from it, a parametric study was initiated to uncover whatever effects rigid bedrock has upon hazard parameters for various depths of soil profile up to 30 m, 40 m, 60 m, 80 m, 100 m, 120 m, 140 m, 160 m, 180 m and 200 m from the ground surface. The overriding purpose of doing said parametric study is centered upon helping the stack holders who can use the data for future development. Such a study is the first of its kind for the Bhutan region, which suffers from the unavailability of national seismic code, and this is a preliminary step towards achieving it.

PSHA Compatible Probabilistic Seismic Site Response Analysis for Oslo, Norway

2020 ◽  
Author(s):  
Brian Carlton ◽  
Amir M. Kaynia
Keyword(s):  
Velocity Profile ◽  
Shear Wave ◽  
Wave Velocity ◽  
Shear Wave Velocity ◽  
Site Response ◽  
Epistemic Uncertainty ◽  
Base Case ◽  
Response Analysis ◽  
Soil Profiles ◽  
Shear Wave Velocity Profile

ABSTRACT This article describes a probabilistic site-response analysis for the city of Oslo, Norway. We first perform a probabilistic seismic hazard analysis (PSHA) for hard rock. Then, we conduct site-response analyses using Monte Carlo simulations to capture uncertainty in the site profile. We include four base-case soil profiles to incorporate epistemic uncertainty, and we vary the shear-wave velocity profile and shear-modulus reduction and damping curves to account for aleatory variability. We base the soil profiles on over 7000 in situ tests, and the shear-wave velocity profile median, standard deviation, and interlayer correlation on over 559 cone penetration tests. Next, we perform regression analyses to estimate medians and standard deviations of site-specific amplification factors (AFs). Finally, we modify the ground-motion models for rock with the AFs and recompute the PSHA for the soil surface. The analyses show that (1) shallower soil profiles have larger uniform hazard spectra (UHS) values at short periods and smaller UHS values at long periods; (2) epistemic uncertainty of the base-case soil shear-wave velocity profile leads to alternative UHS values with a difference of a factor of 2 at short periods; (3) there is only a small difference in the mean magnitudes and distances controlling the hazard for the PSHA conducted for rock compared to soil; (4) response spectra calculated from site-response analyses with no aleatory variability of the soil properties predict significantly smaller spectral acceleration values at periods shorter than the natural site period; (5) using site amplification standard deviations based on ground-motion recordings, instead of site-response analyses, results in a 10%–20% reduction in the soil surface UHS at short periods and a 5%–10% increase at long periods; and (6) the Eurocode 8 AFs are, in general, conservative for Oslo.

Evaluation of the effect of depth to bedrock on seismic amplification phenomena

2020 ◽  
Author(s):  
gaetano falcone ◽  
giuseppe naso ◽  
stefania fabozzi ◽  
federico mori ◽  
massimiliano moscatelli ◽  
...  
Keyword(s):  
Seismic Waves ◽  
Site Response ◽  
Soft Soil ◽  
Free Field ◽  
Response Spectra ◽  
Maximum Depth ◽  
Response Analysis ◽  
Local Conditions ◽  
Seismic Amplification ◽  
Bedrock Depth

&lt;p&gt;When an earthquake occurs, the propagation of the seismic waves is conditioned by local conditions, e.g., depth to seismic bedrock and impedance ratio between soft soil and seismic bedrock. Bearing in mind that the maximum depth of site prospections generally does not extend up to seismic bedrock depth, a parametric study was carried out with reference to ideal case studies in order to investigate the effect on local seismic amplification of the depth to bedrock.&lt;/p&gt;&lt;p&gt;The results are presented in terms of charts of amplification factors (i.e., ratio of integral quantities referred to free-field and reference response spectra) and minimum depth to investigate vs building type. These charts will allow defining the thickness of the cover deposit that should be characterised in terms of geophysical and geotechnical parameters in order to perform seismic site response analysis according to a precautionary approach, in areas where depth to seismic bedrock is higher than conventional maximum depth of site surveys.&lt;/p&gt;

κ0 for soil sites: Observations from KiK-net sites and their use in constraining small-strain damping profiles for site response analysis

2019 ◽  
Vol 36 (1) ◽  
pp. 111-137 ◽  
Author(s):  
Boqin Xu ◽  
Ellen M Rathje ◽  
Youssef Hashash ◽  
Jonathan Stewart ◽  
Kenneth Campbell ◽  
...  
Keyword(s):  
Shear Wave ◽  
Wave Velocity ◽  
Shear Wave Velocity ◽  
Site Response ◽  
Strong Motion ◽  
Small Strain ◽  
Site Amplification ◽  
Site Response Analysis ◽  
Response Analysis ◽  
One Dimensional

Small-strain damping profiles developed from geotechnical laboratory testing have been observed to be smaller than the damping inferred from the observed site amplification from downhole array recordings. This study investigates the high-frequency spectral decay parameter ( κ0) of earthquake motions from soil sites and evaluates the use of κ0 to constrain the small-strain damping profile for one-dimensional site response analysis. Using data from 51 sites from the Kiban-Kyoshin strong motion network (KiK-net) array in Japan and six sites from California, a relationship was developed between κ0 at the surface and both the 30-m time-averaged shear wave velocity ( V s30) and the depth to the 2.5 km/s shear wave velocity horizon ( Z2.5). This relationship demonstrates that κ0 increases with decreasing V s30 and increasing Z2.5. An approach is developed that uses this relationship to establish a target κ0 from which to constrain the small-strain damping profile used in one-dimensional site response analysis. This approach to develop κ0-consistent damping profiles for site response analysis is demonstrated through a recent site amplification study of Central and Eastern North America for the NGA-East project.

scholarly journals KELAS SOIL DAERAH SEKITAR RENCANA TAPAK REAKTOR DAYA EKSPERIMENTAL (RDE) SERPONG DARI DATA MIKROTREMOR

2015 ◽  
Vol 17 (1) ◽  
pp. 57
Author(s):  
Marjiyono Marjiyono ◽  
Hadi Suntoko ◽  
A. Soehaimi ◽  
Yuliastuti Yuliastuti ◽  
H. Syaeful
Keyword(s):  
Shear Wave ◽  
Wave Velocity ◽  
Shear Wave Velocity ◽  
Velocity Structure ◽  
Power Reactor ◽  
Site Response ◽  
Soft Rock ◽  
Response Analysis ◽  
Soil Class ◽  
Single Station

ABSTRAK KELAS SOIL DAERAH SEKITAR RENCANA TAPAK REAKTOR DAYA EKSPERIMENTAL (RDE) SERPONG DARI DATA MIKROTREMOR. Karakteristik geologi permukaan memegang peranan penting dalam analisis respon gelombang di suatu wilayah.  Sehubungan dengan rencana pembangunan Reaktor Daya Eksperimental (RDE) di Serpong, telah dilakukan pemodelan kondisi bawah permukaan dari kombinasi data mikrotremor array dan single station. Pengukuran mikrotremor array dilakukan di 9 lokasi, sedangkan single station di 90 lokasi yang tersebar pada radius ± 1 km di sekitar tapak RDE. Model bawah permukaan yang berupa struktur kecepatan gelombang geser selanjutnya dijadikan dasar untuk menghitung nilai Vs30 di daerah tersebut. Hasil klasifikasi soil berdasarkan nilai Vs30 menunjukkan kelas soil untuk wilayah sekitar tapak RDE secara umum terdiri atas kelas SD (soil menengah) dan SC (batuan lunak). Lokasi rencana tapak sendiri berada dalam wilayah kelas soil SD. Kata kunci : kelas soil, kecepatan gelombang geser, mikrotremor, tapak RDE, Vs30.   ABSTRACT SOIL CLASS AROUND THE SERPONG EXPERIMENTAL POWER REACTOR (EPR) SITE PLAN BASE ON MICROTREMOR DATA. Surface geological characteristics has an important role on site response analysis in a region. In regard with experimental power reactor (EPR) construction plan in Serpong, the subsurface modeling from combination array and single station microtremor data was done. The array and single station microtremor measurement were performed in 9 and 90 sites, respectively, at ± 1 km radius around the EPR site plan. The Vs30 value was calculated from shear wave velocity structure around the investigated area. The soil classification based on Vs30 in the investigated area generally consists of SD (medium soil) and SC (soft rock) class. The EPR site plan its self in the SD class region. Keyword : soil class, shear wave velocity, microtremor, EPR site, Vs30

Sign in / Sign up

Export Citation Format

Share Document