Hybrid Zero-Dimensional C60 clusters with Graphene – Synthesis, Fabrication and Transport Characteristics

MRS Advances ◽  
2017 ◽  
Vol 2 (60) ◽  
pp. 3727-3732
Author(s):  
Srishti Chugh ◽  
Luis Echegoyen ◽  
Anupama B. Kaul
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Raman Spectroscopy ◽  
Electronic Device ◽  
Deposition Technique ◽  
Exfoliated Graphene ◽  
Graphene Synthesis ◽  
Before And After ◽  
Graphene Devices ◽  
Scanning Electron

ABSTRACTIn this work, a new method is presented to synthesize graphene-C60 hybrid materials using an electrophoretic deposition technique to study the graphene-C60 interactions. Electronic measurements of the structure were conducted before and after the attachment of C60 clusters at different applied voltages on graphene devices. The assembled clusters of C60 on mechanically exfoliated graphene were investigated using Raman Spectroscopy and Scanning Electron Microscopy (SEM), which reveal a uniform morphology of C60 on graphene. The results indicate that graphene-C60 hybrids are excellent electron accepting/charge transporting materials which can provide an effective route to facilitate the application of these hybrids in electronic or opto-electronic device platforms.

scholarly journals Redox Mechanism of Azathioprine and Its Interaction with DNA

2021 ◽  
Vol 22 (13) ◽  
pp. 6805
Author(s):  
Mihaela-Cristina Bunea ◽  
Victor-Constantin Diculescu ◽  
Monica Enculescu ◽  
Horia Iovu ◽  
Teodor Adrian Enache
Keyword(s):  
Electron Microscopy ◽  
Mass Spectrometry ◽  
Scanning Electron Microscopy ◽  
Structural Changes ◽  
Differential Pulse ◽  
Immunosuppressive Drug ◽  
Redox Mechanism ◽  
Before And After ◽  
Dna Film ◽  
Scanning Electron

The electrochemical behavior and the interaction of the immunosuppressive drug azathioprine (AZA) with deoxyribonucleic acid (DNA) were investigated using voltammetric techniques, mass spectrometry (MS), and scanning electron microscopy (SEM). The redox mechanism of AZA on glassy carbon (GC) was investigated using cyclic and differential pulse (DP) voltammetry. It was proven that the electroactive center of AZA is the nitro group and its reduction mechanism is a diffusion-controlled process, which occurs in consecutive steps with formation of electroactive products and involves the transfer of electrons and protons. A redox mechanism was proposed and the interaction of AZA with DNA was also investigated. Morphological characterization of the DNA film on the electrode surface before and after interaction with AZA was performed using scanning electron microscopy. An electrochemical DNA biosensor was employed to study the interactions between AZA and DNA with different concentrations, incubation times, and applied potential values. It was shown that the reduction of AZA molecules bound to the DNA layer induces structural changes of the DNA double strands and oxidative damage, which were recognized through the occurrence of the 8-oxo-deoxyguanosine oxidation peak. Mass spectrometry investigation of the DNA film before and after interaction with AZA also demonstrated the formation of AZA adducts with purine bases.

scholarly journals Improving the reactivity of phenylacetylene macrocycles toward topochemical polymerization by side chains modification

2014 ◽  
Vol 10 ◽  
pp. 1613-1619 ◽  
Author(s):  
Simon Rondeau-Gagné ◽  
Jules Roméo Néabo ◽  
Maxime Daigle ◽  
Katy Cantin ◽  
Jean-François Morin
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Raman Spectroscopy ◽  
Self Assembly ◽  
Significant Enhancement ◽  
Side Chains ◽  
X Ray Diffraction ◽  
X Ray ◽  
Topochemical Polymerization ◽  
Scanning Electron

The synthesis and self-assembly of two new phenylacetylene macrocycle (PAM) organogelators were performed. Polar 2-hydroxyethoxy side chains were incorporated in the inner part of the macrocycles to modify the assembly mode in the gel state. With this modification, it was possible to increase the reactivity of the macrocycles in the xerogel state to form polydiacetylenes (PDAs), leading to a significant enhancement of the polymerization yields. The organogels and the PDAs were characterized using Raman spectroscopy, X-ray diffraction (XRD) and scanning electron microscopy (SEM).

Synthesis and Film Investigation of Titania

2013 ◽  
Vol 832 ◽  
pp. 128-131
Author(s):  
Sharipah Nadzirah ◽  
Uda Hashim
Keyword(s):  
Thin Film ◽  
Electron Microscopy ◽  
Thin Films ◽  
Scanning Electron Microscopy ◽  
Titanium Dioxide ◽  
Sol Gel ◽  
Titanium Butoxide ◽  
Before And After ◽  
Scanning Electron ◽  
Spin Coater

Titania or titanium dioxide (TiO2) thin film has been synthesized via sol-gel method with monoethanolamine (MEA) as a catalyst. The mixing of titanium butoxide as a precursor, ethanol as a solvent and MEA were stirred using magnetic stirrer under ambient temperature [. The TiO2solution prepared then was deposited on SiO2substrates using spin-coater and the coated films were annealed at 600°C. Finally, both before and after annealed TiO2thin films were characterized using Field Emission Scanning Electron Microscopy (FESEM). The obtained results show the different TiO2particles formation before and after annealed.

scholarly journals In Situ Laser-Induced Fabrication of a Ruthenium-Based Microelectrode for Non-Enzymatic Dopamine Sensing

Materials ◽  
2020 ◽  
Vol 13 (23) ◽  
pp. 5385
Author(s):  
Maxim S. Panov ◽  
Anastasiia E. Grishankina ◽  
Daniil D. Stupin ◽  
Alexey I. Lihachev ◽  
Vladimir N. Mironov ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Electrical Impedance ◽  
High Sensitivity ◽  
Simple Approach ◽  
Electrical Impedance Spectroscopy ◽  
Deposition Technique ◽  
Developed Surface ◽  
Scanning Electron

In this paper, we propose a fast and simple approach for the fabrication of the electrocatalytically active ruthenium-containing microstructures using a laser-induced metal deposition technique. The results of scanning electron microscopy and electrical impedance spectroscopy (EIS) demonstrate that the fabricated ruthenium-based microelectrode had a highly developed surface composed of 10 μm pores and 10 nm zigzag cracks. The fabricated material exhibited excellent electrochemical properties toward non-enzymatic dopamine sensing, including high sensitivity (858.5 and 509.1 μA mM−1 cm−2), a low detection limit (0.13 and 0.15 μM), as well as good selectivity and stability.

scholarly journals Effect of Different Cooling Regimes on the Mechanical Properties of Cementitious Composites Subjected to High Temperatures

2014 ◽  
Vol 2014 ◽  
pp. 1-7 ◽  
Author(s):  
Jiangtao Yu ◽  
Wenfang Weng ◽  
Kequan Yu
Keyword(s):  
Electron Microscopy ◽  
Mechanical Properties ◽  
Scanning Electron Microscopy ◽  
High Temperature ◽  
Significant Influence ◽  
Microstructural Characterization ◽  
Cementitious Composite ◽  
Engineered Cementitious Composite ◽  
Before And After ◽  
Scanning Electron

The influence of different cooling regimes (quenching in water and cooling in air) on the residual mechanical properties of engineered cementitious composite (ECC) subjected to high temperature up to 800°C was discussed in this paper. The ECC specimens are exposed to 100, 200, 400, 600, and 800°C with the unheated specimens for reference. Different cooling regimens had a significant influence on the mechanical properties of postfire ECC specimens. The microstructural characterization was examined before and after exposure to fire deterioration by using scanning electron microscopy (SEM). Results from the microtest well explained the mechanical properties variation of postfire specimens.

Sign in / Sign up

Export Citation Format

Share Document