scholarly journals Effect of Different Cooling Regimes on the Mechanical Properties of Cementitious Composites Subjected to High Temperatures

2014 ◽  
Vol 2014 ◽  
pp. 1-7 ◽  
Author(s):  
Jiangtao Yu ◽  
Wenfang Weng ◽  
Kequan Yu
Keyword(s):  
Electron Microscopy ◽  
Mechanical Properties ◽  
Scanning Electron Microscopy ◽  
High Temperature ◽  
Significant Influence ◽  
Microstructural Characterization ◽  
Cementitious Composite ◽  
Engineered Cementitious Composite ◽  
Before And After ◽  
Scanning Electron

The influence of different cooling regimes (quenching in water and cooling in air) on the residual mechanical properties of engineered cementitious composite (ECC) subjected to high temperature up to 800°C was discussed in this paper. The ECC specimens are exposed to 100, 200, 400, 600, and 800°C with the unheated specimens for reference. Different cooling regimens had a significant influence on the mechanical properties of postfire ECC specimens. The microstructural characterization was examined before and after exposure to fire deterioration by using scanning electron microscopy (SEM). Results from the microtest well explained the mechanical properties variation of postfire specimens.

scholarly journals Impact of High Temperature on the Compressive Strength of ECC

2014 ◽  
Vol 2014 ◽  
pp. 1-7 ◽  
Author(s):  
Xingyan Shang ◽  
Zhoudao Lu
Keyword(s):  
Electron Microscopy ◽  
Mechanical Properties ◽  
Scanning Electron Microscopy ◽  
Compressive Strength ◽  
High Temperature ◽  
Microstructural Characterization ◽  
Cementitious Composites ◽  
Strengthening Effect ◽  
Before And After ◽  
Scanning Electron

The influence of different cooling regimes (quenching in water and cooling in air) on the residual mechanical properties of ECC (engineered cementitious composites) exposed to high temperature up to 800°C was discussed in this paper. The specimens quenching in water gained better mechanical properties than the ones cooling in air. The strengthening effect of quenching for specimens subjected to 800°C was more significant than for the ones subjected to 400°C. The microstructural characterization is examined before and after exposure to fire deterioration by using scanning electron microscopy. Results from the microtest well explained the mechanical properties variation of postfire specimens.

Microstructure and Mechanical Properties of Titanium Severely Strained by Means of Friction Roll Processing

2007 ◽  
Vol 561-565 ◽  
pp. 909-912 ◽  
Author(s):  
Mei Qin Shi ◽  
Yoshimasa Takayama ◽  
Hajime Kato
Keyword(s):  
Electron Microscopy ◽  
Mechanical Properties ◽  
Scanning Electron Microscopy ◽  
Texture Evolution ◽  
Electron Back Scatter Diffraction ◽  
Subsequent Annealing ◽  
Severe Plastic Deformation Technique ◽  
Before And After ◽  
Feeding Speed ◽  
Scanning Electron

Severe strain has been introduced to commercially purity (CP) titanium samples by means of friction roll processing (FRP), which represents an alternative severe plastic deformation technique by inducing shear strain. FRP has an excellent possibility of controlling surface microstructure combining with subsequent annealing. The resultant microstructure refinement and texture evolution has been investigated. Hardness of sample was measured to compare mechanical properties of samples before and after FRPed. Parameters including the different indentations given to the sample and sample feeding speed were experimentally conducted to find the optimum condition for investigating effect on microstructure evolution. After subsequent annealing, the evolutions of microstructure and texture were observed by field emission scanning electron microscopy (FESEM) and analyzed by scanning electron microscopy/ electron back scatter diffraction pattern (SEM/EBSP) technique. Transverse texture was found to be the preferred orientation existing in the thin top layer of the sample after FRP and annealed at 823K for 1h.

Effect of Hydroentanglement on Structures and Properties of Wet-Laid Paper Sheets

2019 ◽  
Vol 821 ◽  
pp. 201-205
Author(s):  
Chao Deng ◽  
Xian Gyu Jin
Keyword(s):  
Electron Microscopy ◽  
Mechanical Properties ◽  
Scanning Electron Microscopy ◽  
Tensile Strength ◽  
Air Permeability ◽  
Water Absorbency ◽  
Structures And Properties ◽  
Before And After ◽  
Properties Of Materials ◽  
Scanning Electron

In this work, pulp/lyocell wet-laid paper sheets have been consolidated by hydroentanglement techniques. Scanning electron microscopy has been used to evaluate the structures of wet-laid paper sheets before and after hydroentanglement. Wet tensile strength along longitudinal (preferential) and transverse directions show the effect of hydroentanglement techniques on the mechanical properties of wet-laid paper sheets. In addition, the air permeability and water absorbency properties of materials have been evaluated. The results show that the structures of wet-laid paper sheets become fluffy and fiber entanglements increase after consolidation. The wet tensile strength values of wet-laid paper sheets at the longitudinal and transverse directions are increased by 109.0% and 78.7%, respectively after hydroentanglement. The air permeability and water absorbency of wet-laid paper sheets are increased by 957.6% and 137.0%.

scholarly journals Microstructural Characterization of the Anisotropy and Cyclic Deformation Behavior of Selective Laser Melted AlSi10Mg Structures

Metals ◽  
2018 ◽  
Vol 8 (10) ◽  
pp. 825 ◽  
Author(s):  
Mustafa Awd ◽  
Felix Stern ◽  
Alexander Kampmann ◽  
Daniel Kotzem ◽  
Jochen Tenkamp ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Mechanical Properties ◽  
Scanning Electron Microscopy ◽  
Selective Laser Melting ◽  
Microstructural Characterization ◽  
Fatigue Tests ◽  
Laser Melting ◽  
Structural Anisotropy ◽  
Scanning Electron

The laser-based fusion of metallic powder allows construction of components with arbitrary complexity. In selective laser melting, the rapid cooling of melt pools in the direction of the component building causes significant anisotropy of the microstructure and properties. The objective of this work is to investigate the influence of build anisotropy on the microstructure and mechanical properties in selective laser melted AlSi10Mg. The alloy is comprehensively used in the automotive industry and has been one of the most frequently investigated Al alloys in additive manufacturing. Using specimens produced in three different building orientations with respect to the build platform, the anisotropy of the microstructure and defects will be investigated using scanning electron microscopy and microcomputed tomography. The analysis showed a seven-times higher pore density for the 90°-specimen compared to the 0°-specimen. The scanning electron microscopy revealed the influence of the direction of the cooling gradient on the constitution of the eutectic phase. Mechanical properties are produced in quasi-static and fatigue tests of variable and constant loading amplitudes. Specimens of 0° showed 8% higher tensile strength compared to 90°-specimens, while fracture strain was reduced almost 30% for the 45°-specimen. The correlation between structural anisotropy and mechanical properties illustrates the influence of the building orientation during selective laser melting on foreseen fields of application.

FTIR Spectroscopy Analysis of PLA Biocomposites Reinforced with Hemp Fibers

2020 ◽  
Vol 850 ◽  
pp. 112-117
Author(s):  
Anete Smoca
Keyword(s):  
Electron Microscopy ◽  
Mechanical Properties ◽  
Scanning Electron Microscopy ◽  
Spectroscopy Analysis ◽  
Hemp Fiber ◽  
Hemp Fibers ◽  
Three Samples ◽  
Before And After ◽  
Molded Parts ◽  
Scanning Electron

In this study, Fourier-transform infrared spectroscopy (FTIR) of polylactide (PLA) biocomposites reinforced with hemp fibers were analyzed. Three samples of biocomposites with different proportions of hemp fibers in the PLA matrix were compared. Hemp and PLA fibers in biocomposite were evenly blended using carding technology. Samples before and after water absorption were compared using scanning electron microscopy (SEM). Thermoset treated polylactide and hemp fiber biocomposites have high mechanical properties, that allow to reduce the number of materials in the product. The developed biocomposite can be used as a slab material and for molded parts of furniture, etc.

Electron Microscopic Observation of the Longitudinal Organization of Poly (p-Phenylene Terephthalamide) Fibers

1982 ◽  
Vol 40 ◽  
pp. 680-681
Author(s):  
Li Li-Sheng ◽  
L.F. Allard ◽  
W.C. Bigelow
Keyword(s):  
Electron Microscopy ◽  
Mechanical Properties ◽  
Scanning Electron Microscopy ◽  
Microscopic Observation ◽  
Electron Microscopic Observation ◽  
Electron Microscopic ◽  
Aromatic Polyamides ◽  
Radial Arrangement ◽  
Scanning Electron ◽  
Better Than

The aromatic polyamides form a class of fibers having mechanical properties which are much better than those of aliphatic polyamides. Currently, the accepted morphology of these fibers as proposed by M.G. Dobb, et al. is a radial arrangement of pleated sheets, with the plane of the pleats parallel to the axis of the fiber. We have recently obtained evidence which supports a different morphology of this type of fiber, using ultramicrotomy and ion-thinning techniques to prepare specimens for transmission and scanning electron microscopy.

scholarly journals Analysis of PLA Composite Filaments Reinforced with Lignin and Polymerised-Lignin-Treated NFC

Polymers ◽  
2021 ◽  
Vol 13 (13) ◽  
pp. 2174
Author(s):  
Diana Gregor-Svetec ◽  
Mirjam Leskovšek ◽  
Blaž Leskovar ◽  
Urška Stanković Elesini ◽  
Urška Vrabič-Brodnjak
Keyword(s):  
Electron Microscopy ◽  
Mechanical Properties ◽  
Scanning Electron Microscopy ◽  
Tensile Strength ◽  
Glassy State ◽  
Nanofibrillated Cellulose ◽  
Dynamic Mechanical Properties ◽  
Initial Modulus ◽  
Surface Modified ◽  
Scanning Electron

Polylactic acid (PLA) is one of the most suitable materials for 3D printing. Blending with nanoparticles improves some of its properties, broadening its application possibilities. The article presents a study of composite PLA matrix filaments with added unmodified and lignin/polymerised lignin surface-modified nanofibrillated cellulose (NFC). The influence of untreated and surface-modified NFC on morphological, mechanical, technological, infrared spectroscopic, and dynamic mechanical properties was evaluated for different groups of samples. As determined by the stereo and scanning electron microscopy, the unmodified and surface-modified NFCs with lignin and polymerised lignin were present in the form of plate-shaped agglomerates. The addition of NFC slightly reduced the filaments’ tensile strength, stretchability, and ability to absorb energy, while in contrast, the initial modulus slightly improved. By adding NFC to the PLA matrix, the bending storage modulus (E’) decreased slightly at lower temperatures, especially in the PLA samples with 3 wt% and 5 wt% NFC. When NFC was modified with lignin and polymerised lignin, an increase in E’ was noticed, especially in the glassy state.

scholarly journals Corrosion Behavior and Mechanical Properties of a Nanocomposite Superhydrophobic Coating

Coatings ◽  
2021 ◽  
Vol 11 (6) ◽  
pp. 652
Author(s):  
Divine Sebastian ◽  
Chun-Wei Yao ◽  
Lutfun Nipa ◽  
Ian Lian ◽  
Gary Twu
Keyword(s):  
Electron Microscopy ◽  
Mechanical Properties ◽  
Scanning Electron Microscopy ◽  
Atomic Force Microscopy ◽  
Nanocomposite Coating ◽  
Superhydrophobic Coating ◽  
Force Microscopy ◽  
Atomic Force ◽  
Microscopy Images ◽  
Scanning Electron

In this work, a mechanically durable anticorrosion superhydrophobic coating is developed using a nanocomposite coating solution composed of silica nanoparticles and epoxy resin. The nanocomposite coating developed was tested for its superhydrophobic behavior using goniometry; surface morphology using scanning electron microscopy and atomic force microscopy; elemental composition using energy dispersive X-ray spectroscopy; corrosion resistance using atomic force microscopy; and potentiodynamic polarization measurements. The nanocomposite coating possesses hierarchical micro/nanostructures, according to the scanning electron microscopy images, and the presence of such structures was further confirmed by the atomic force microscopy images. The developed nanocomposite coating was found to be highly superhydrophobic as well as corrosion resistant, according to the results from static contact angle measurement and potentiodynamic polarization measurement, respectively. The abrasion resistance and mechanical durability of the nanocomposite coating were studied by abrasion tests, and the mechanical properties such as reduced modulus and Berkovich hardness were evaluated with the aid of nanoindentation tests.

scholarly journals Redox Mechanism of Azathioprine and Its Interaction with DNA

2021 ◽  
Vol 22 (13) ◽  
pp. 6805
Author(s):  
Mihaela-Cristina Bunea ◽  
Victor-Constantin Diculescu ◽  
Monica Enculescu ◽  
Horia Iovu ◽  
Teodor Adrian Enache
Keyword(s):  
Electron Microscopy ◽  
Mass Spectrometry ◽  
Scanning Electron Microscopy ◽  
Structural Changes ◽  
Differential Pulse ◽  
Immunosuppressive Drug ◽  
Redox Mechanism ◽  
Before And After ◽  
Dna Film ◽  
Scanning Electron

The electrochemical behavior and the interaction of the immunosuppressive drug azathioprine (AZA) with deoxyribonucleic acid (DNA) were investigated using voltammetric techniques, mass spectrometry (MS), and scanning electron microscopy (SEM). The redox mechanism of AZA on glassy carbon (GC) was investigated using cyclic and differential pulse (DP) voltammetry. It was proven that the electroactive center of AZA is the nitro group and its reduction mechanism is a diffusion-controlled process, which occurs in consecutive steps with formation of electroactive products and involves the transfer of electrons and protons. A redox mechanism was proposed and the interaction of AZA with DNA was also investigated. Morphological characterization of the DNA film on the electrode surface before and after interaction with AZA was performed using scanning electron microscopy. An electrochemical DNA biosensor was employed to study the interactions between AZA and DNA with different concentrations, incubation times, and applied potential values. It was shown that the reduction of AZA molecules bound to the DNA layer induces structural changes of the DNA double strands and oxidative damage, which were recognized through the occurrence of the 8-oxo-deoxyguanosine oxidation peak. Mass spectrometry investigation of the DNA film before and after interaction with AZA also demonstrated the formation of AZA adducts with purine bases.

Sign in / Sign up

Export Citation Format

Share Document