Characterization of Plasma Synthesized Vertical Carbon Nanofibers for Nanoelectronics Applications

2012 ◽  
Vol 1451 ◽  
pp. 117-122 ◽  
Author(s):  
Jaesung Lee ◽  
Philip X.-L. Feng ◽  
Anupama B. Kaul
Keyword(s):  
Carbon Nanofibers ◽  
Material Characterization ◽  
Three Dimensional ◽  
Nanoelectromechanical Systems ◽  
Chemical Compositions ◽  
Growth Mechanisms ◽  
Structural Morphology ◽  
Catalyst Nanoparticles ◽  
X Ray

ABSTRACTWe report on the material characterization of carbon nanofibers (CNFs) which are assembled into a three-dimensional (3D) configuration for making new nanoelectromechanical systems (NEMS). High-resolution scanning electron microscopy (SEM) and x-ray electron dispersive spectroscopy (XEDS) are employed to decipher the morphology and chemical compositions of the CNFs at various locations along individual CNFs grown on silicon (Si) and refractory nitride (NbTiN) substrates, respectively. The measured characteristics suggest interesting properties of the CNF bodies and their capping catalyst nanoparticles, and growth mechanisms on the two substrates. Laser irradiation on the CNFs seems to cause thermal oxidation and melting of catalyst nanoparticles. The structural morphology and chemical compositions of the CNFs revealed in this study should aid in the applications of the CNFs to nanoelectronics and NEMS.

scholarly journals New Insights into the Crystal Chemistry of Elpidite, Na2Zr[Si6O15]·3H2O and (Na1+YCax□1−X−Y)Σ=2Zr[Si6O15]·(3−X)H2O, and Ab Initio Modeling of IR Spectra

Materials ◽  
2021 ◽  
Vol 14 (9) ◽  
pp. 2160
Author(s):  
Alexander Bogdanov ◽  
Ekaterina Kaneva ◽  
Roman Shendrik
Keyword(s):  
Ir Spectra ◽  
Structural Models ◽  
Chemical Characterization ◽  
Chemical Compositions ◽  
X Ray Diffraction ◽  
Special Group ◽  
X Ray ◽  
Influence Of Water ◽  
Radioactive Species

Elpidite belongs to a special group of microporous zirconosilicates, which are of great interest due to their capability to uptake various molecules and ions, e.g., some radioactive species, in their structural voids. The results of a combined electron probe microanalysis and single-crystal X-ray diffraction study of the crystals of elpidite from Burpala (Russia) and Khan-Bogdo (Mongolia) deposits are reported. Some differences in the chemical compositions are observed and substitution at several structural positions within the structure of the compounds are noted. Based on the obtained results, a detailed crystal–chemical characterization of the elpidites under study was carried out. Three different structure models of elpidite were simulated: Na2ZrSi6O15·3H2O (related to the structure of Russian elpidite), partly Ca-replaced Na1.5Ca0.25ZrSi6O15·2.75H2O (close to elpidite from Mongolia), and a hypothetical CaZrSi6O15·2H2O. The vibration spectra of the models were obtained and compared with the experimental one, taken from the literature. The strong influence of water molecule vibrations on the shape of IR spectra of studied structural models of elpidite is discussed in the paper.

Three dimensional characterization of micronized soybean seeds using X-ray microtomography

2021 ◽  
Vol 127 ◽  
pp. 388-397
Author(s):  
Rani Puthukulangara Ramachandran ◽  
Chyngyz Erkinbaev ◽  
Sandeep Thakur ◽  
Jitendra Paliwal
Keyword(s):  
Three Dimensional ◽  
Soybean Seeds ◽  
X Ray

Three dimensional characterization of laser ablation craters using high resolution X-ray computed tomography

2018 ◽  
Vol 139 ◽  
pp. 75-82 ◽  
Author(s):  
A.H. Galmed ◽  
A. du Plessis ◽  
S.G. le Roux ◽  
E. Hartnick ◽  
H. Von Bergmann ◽  
...  
Keyword(s):  
Computed Tomography ◽  
Laser Ablation ◽  
High Resolution ◽  
Three Dimensional ◽  
X Ray ◽  
X Ray Computed

Preparation of Carbon Nanofibers from Polyacrylonitrile Nanofibers by Electrospinning

2011 ◽  
Vol 415-417 ◽  
pp. 642-647
Author(s):  
En Zhong Li ◽  
Da Xiang Yang ◽  
Wei Ling Guo ◽  
Hai Dou Wang ◽  
Bin Shi Xu
Keyword(s):  
Electron Microscope ◽  
Carbon Nanofibers ◽  
Photoelectron Spectroscopy ◽  
Solution Concentration ◽  
Dimethyl Formamide ◽  
Ultrafine Fibers ◽  
X Ray ◽  
Scanning Electron ◽  
Pan Fibers

Ultrafine fibers were electrospun from polyacrylonitrile (PAN)/N,N-dimethyl formamide (DMF) solution as a precursor of carbon nanofibers. The effects of solution concentration, applied voltage and flow rate on preparation and morphologies of electrospun PAN fibers were investigated. Morphologies of the green fibers, stabilized fibers and carbonized fibers were compared by scanning electron microscope (SEM). The diameter of PAN nanofibers is about 450nm and the distribution of diameter is well-proportioned. Characterization of the elements changes of fibers were performed by X-ray photoelectron spectroscopy (XPS).

Characterization of Al65.0Cu32.9Co2.1 Alloy Containing Nanofibres

2012 ◽  
Vol 186 ◽  
pp. 212-215
Author(s):  
Jacek Krawczyk ◽  
Włodzimierz Bogdanowicz ◽  
Grzegorz Dercz ◽  
Wojciech Gurdziel
Keyword(s):  
Electron Microscopy ◽  
Average Diameter ◽  
Chemical Compositions ◽  
X Ray ◽  
Transmission Electron ◽  
Orthogonal Set ◽  
T Phase ◽  
Terminal Area ◽  
Scanning Electron

Microstructure of terminal area of Al65Cu32.9Co2.1ingots (numbers indicate at.%), obtained via directional solidification was studied. Scanning Electron Microscopy, Transmission Electron Microscopy and X-ray powder diffraction were applied. Point microanalysis by Scanning Electron Microscope was used for examination of chemical compositions of alloy phases. It was found that tetragonal θ phase of Al2Cu stoichiometric formula was the dominate phase (matrix). Additionally the alloy contained orthogonal set of nanofibres of Al7Cu2Co T phase with the average diameter of 50-500 nm and oval areas of hexagonal Al3(Cu,Co)2H-phase, surrounded by monoclinic AlCu η1phase rim. Inside some areas of H-phase cores of decagonal quasicrystalline D phase were observed.

X-ray topographic determination of the granular structure in a graphite mosaic crystal: a three-dimensional reconstruction

2000 ◽  
Vol 33 (4) ◽  
pp. 1023-1030 ◽  
Author(s):  
M. Ohler ◽  
M. Sanchez del Rio ◽  
A. Tuffanelli ◽  
M. Gambaccini ◽  
A. Taibi ◽  
...  
Keyword(s):  
Structural Parameters ◽  
Pyrolytic Graphite ◽  
Three Dimensional ◽  
X Ray ◽  
Dimensional Reconstruction ◽  
Mosaic Crystals ◽  
Spatial Locations ◽  
Crystalline Domains

Section topographs recorded at different spatial locations and at different rocking angles of a highly oriented pyrolytic graphite (HOPG) crystal allow three-dimensional maps of the local angular-dependent scattering power to be obtained. This is performed with a direct reconstruction from the intensity distribution on such topographs. The maps allow the extraction of information on local structural parameters such as size, form and internal mosaic spread of crystalline domains. This data analysis leads to a new method for the characterization of mosaic crystals. Perspectives and limits of applicability of this method are discussed.

Solving the 3D structure of metal nanoparticles

2007 ◽  
Vol 222 (11/2007) ◽  
Author(s):  
Anatoly Frenkel
Keyword(s):  
Metal Nanoparticles ◽  
Short Range ◽  
Short Range Order ◽  
3D Structure ◽  
Three Dimensional ◽  
X Ray ◽  
Particle Distributions ◽  
Structure Of Metal ◽  
X Ray Absorption

We discuss methods of Extended X-ray Absorption Fine-Structure (EXAFS) analysis that provide three-dimensional structural characterization of metal nanoparticles, both mono- and bi-metallic. For the bimetallic alloys, we use short range order measurements to discriminate between random and non-random inter-particle distributions of atoms. We also discuss the application of EXAFS to heterogeneous nanoparticle systems.

Three-Dimensional Characterization of the Microstructure of Bioglass/Polyethylene Composite by X-Ray Microtomography

2007 ◽  
Vol 330-332 ◽  
pp. 503-506
Author(s):  
Xiao Wei Fu ◽  
Jie Huang ◽  
E.S. Thian ◽  
Serena Best ◽  
William Bonfield
Keyword(s):  
Spatial Distribution ◽  
Volume Fraction ◽  
Three Dimensional ◽  
X Ray ◽  
Polyethylene Composite ◽  
Bioactive Properties ◽  
Recent Developments ◽  
3D Information

A Bioglass® reinforced polyethylene (Bioglass®/polyethylene) composite has been prepared, which combines the high bioactivity of Bioglass® and the toughness of polyethylene. The spatial distribution of Bioglass® particles within the composite is important for the performance of composites in-vivo. Recent developments in X-ray microtomography (XμT) have made it possible to visualize internal and microstructural details with different X-ray absorbencies, nondestructively, and to acquire 3D information at high spatial resolution. In this study, the volume fraction and 3D spatial distribution of Bioglass® particles has been acquired quantitatively by XμT. The information obtained provides a foundation for understanding the mechanical and bioactive properties of the Bioglass®/polyethylene composites.

Sign in / Sign up

Export Citation Format

Share Document