MeV Si Ions Bombardment Effects on the Properties of Nano-Layers of SiO2/SiO2+Ag

2008 ◽  
Vol 1074 ◽  
Author(s):  
Sadik Guner ◽  
Satilmis Budak ◽  
Claudiu I Muntele ◽  
Cydale C Smith ◽  
Daryush Ila
Keyword(s):  
Thermal Conductivity ◽  
Electrical Conductivity ◽  
Seebeck Coefficient ◽  
Layered Structure ◽  
Figure Of Merit ◽  
Rutherford Backscattering Spectrometry ◽  
Conductivity Measurement ◽  
Electronic Energy ◽  
Before And After

ABSTRACTWe have grown 100 periodic SiO2/SiO2+Ag multi-nano-layered systems where the SiO2+Ag layers were 7.26 nm and SiO2 buffer layer were 4 nm, total thickness is 563 nm. Using interferometer as well as in-situ thickness monitoring, we measured the thickness of the layers; using Rutherford Backscattering Spectrometry (RBS) measured the concentration and distribution of Ag in SiO2. The electrical conductivity, thermal conductivity and the Seebeck coefficient of the layered structure were measured at room temperature before and after bombardment by 5 MeV Si ions. The energy of the Si ions were chosen such that the ions are stopped in the silicon substrate and only electronic energy due to ionization is deposited in the layered structure. The electrical conductivity measured using Van der Pauw method. Thermal conductivity of the thin films was measured using an in-house built 3ω thermal conductivity measurement system. Using the measured Seebeck coefficient, thermal conductivity and electrical conductivity we calculated the figure of merit (ZT). We will report our findings of change in the figure of merit as a function of the bombardment fluence.

Thermoelectric Properties of YbBiPt and YBiPt Thin Films

2008 ◽  
Vol 1100 ◽  
Author(s):  
Sadik Guner ◽  
Satilmis Budak ◽  
Claudiu I Muntele ◽  
Daryush Ila
Keyword(s):  
Thin Films ◽  
Thermal Conductivity ◽  
Electrical Conductivity ◽  
Seebeck Coefficient ◽  
Thermoelectric Properties ◽  
Figure Of Merit ◽  
Rutherford Backscattering Spectrometry ◽  
Conductivity Measurement ◽  
Electronic Energy ◽  
Before And After

AbstractMonolayer thin films of YbBiPt and YBiPt have been produced with 560 nm and 394 nm thick respectively in house and their thermoelectric properties were measured before and after MeV ion bombardment. The energy of the ions were selected such that the bombarding Si ions stop in the silicon substrate and deposit only electronic energy by ionization in the deposited thin film. The bombardment by 5.0 MeV Si ions at various fluences changed the homogeneity as well as reducing the internal stress in the films thus affecting the thermal, electrical and Seebeck coefficient of thin films. The stoichiometry of the thin films was determined using Rutherford Backscattering Spectrometry, the thickness has been measured using interferometry and the electrical conductivity was measured using Van der Pauw method. Thermal conductivity of the thin films was measured using an in-house built 3ω thermal conductivity measurement system. Using the measured Seebeck coefficient, thermal conductivity and electrical conductivity we calculated the figure of merit (ZT). We will report our findings of change in the measured figure of merit as a function of bombardment fluence.

MeV Si Ions Bombardment Effects on SiO2/SiO2-ZrNiSn Nano-layered Thermoelectric Generator

2008 ◽  
Vol 1102 ◽  
Author(s):  
S. Budak ◽  
S. Guner ◽  
C. Muntele ◽  
D. ILA
Keyword(s):  
Thermal Conductivity ◽  
Electrical Conductivity ◽  
Thermal Properties ◽  
Seebeck Coefficient ◽  
Figure Of Merit ◽  
Thermoelectric Generator ◽  
Rutherford Backscattering Spectrometry ◽  
Absolute Temperature ◽  
Dimensionless Figure Of Merit ◽  
Before And After

AbstractWe have deposited 50 nano-layers of 710 nm of SiO2/SiO2+ZrNiSn with a periodic structure consisting of alternating layers where each layer is about 14 nm thick. The purpose of this research is to generate nanolayers of nanostructures of ZrNiSn with SiO2 as host and as buffer layer using a combination of co-deposition and MeV ion bombardment taking advantage of the energy deposited in the MeV ions track to nucleate nanostructures. The performance of the thermoelectric materials and devices is shown by a dimensionless figure of merit, ZT = S2σT/ĸ, where S is the Seebeck coefficient, σ is the electrical conductivity, T is the absolute temperature and ĸ is the thermal conductivity. ZT can be increased by increasing S, increasing σ, or decreasing ĸ. The electrical and thermal properties of the layered structures were studied before and after bombardment by 5 MeV Si ions at seven different fluences ranging from 1014 to 1015 ions/cm2 in order to form nanostructures in layers of SiO2 containing few percent of ZrNiSn. Rutherford Backscattering Spectrometry (RBS) was used to monitor elemental analysis of the film.

Thermoelectric Generators of Sequentially Deposited Si/Si+Ge Nano-layered Superlattices

2009 ◽  
Vol 1181 ◽  
Author(s):  
Cydale Smith ◽  
Marcus Pugh ◽  
Hervie Martin ◽  
Rufus Durel Hill ◽  
Brittany James ◽  
...  
Keyword(s):  
Thermal Conductivity ◽  
Electrical Conductivity ◽  
Seebeck Coefficient ◽  
Thermoelectric Materials ◽  
Figure Of Merit ◽  
Rutherford Backscattering Spectrometry ◽  
Ion Beam ◽  
Absolute Temperature ◽  
Simulation Software ◽  
The Cross

AbstractEffective thermoelectric materials have a low thermal conductivity and a high electrical conductivity. The performance of the thermoelectric materials and devices is shown by a dimensionless figure of merit, ZT = S2sσ/ KTC, σ is the electrical conductivity T/KTC, where S is the Seebeck coefficient, T is the absolute temperature and KTC is the thermal conductivity. In this study we have prepared the thermoelectric generator device of Si/Si+Ge multi-layer superlattice films using the ion beam assisted deposition (IBAD). To determine the stoichiometry of the elements of Si and Ge in the grown multilayer films and the thickness of the grown multi-layer films Rutherford Backscattering Spectrometry (RBS) and RUMP simulation software package were used. The 5 MeV Si ion bombardments were performed to make quantum clusters in the multi-layer superlattice thin films to decrease the cross plane thermal conductivity, increase the cross plane Seebeck coefficient and cross plane electrical conductivity.Keywords: Ion bombardment, thermoelectric properties, multi-nanolayers, Figure of merit.

Investigating the Effects of Sodium Chloride Particles on Thermoelectric Properties of Bismuth Telluride

2017 ◽  
Author(s):  
T. Alexander ◽  
M. Rahman ◽  
R. Asmatulu
Keyword(s):  
Thermal Conductivity ◽  
Electrical Conductivity ◽  
Sodium Chloride ◽  
Seebeck Coefficient ◽  
Bismuth Telluride ◽  
Figure Of Merit ◽  
Hot Water ◽  
Dimensionless Figure Of Merit ◽  
Before And After ◽  
Baseline Sample

Cylindrical pellets of near stoichiometric bismuth telluride (Bi2Te3) powder with NaCl particles were made using a cold pressing and pressureless sintering technique. The sodium chloride was leached out from the samples in hot water, resulting in porous samples with varying levels of porosity. The electrical conductivity, Seebeck coefficient, and thermal conductivity were measured at room temperature using a testing apparatus designed and built by the researcher, both before and after the leaching of sodium chloride. From this data, the figure of merit was calculated. Samples of pure bismuth telluride (0% NaCl) served as the baseline samples for comparison. Both the presence of NaCl and pores were efficient at increasing the dimensionless figure of merit. Porous samples initially containing 20% NaCl had a 37.55% higher figure of merit compared to baseline samples, and an 89.07% increase in the figure of merit was seen from the solid samples with NaCl inclusions at a concentration of 30% by volume. The electrical conductivity was negatively affected by both inclusions and porosity, but significant increases in Seebeck coefficient, and reduced thermal conductivity were significantly enough for an overall increase in dimensionless figure of merit. The figure of merit for the baseline sample was approximately 0.18, and the highest values observed for the NaCl inclusion and porous samples were 0.34 and 0.25 respectively. These values are far less than that of what is considered a state of the art thermoelectric material, but the materials and methods used were simple, inexpensive, and scalable, showing great potential for applicability for use with optimized thermoelectric materials in hopes of further increasing their figure of merit.

Effect of MeV Si Ion Bombardment on Thermoelectric Characteristics of Sequentially Deposited SiO2/AuxSiO2(1-x) Nanolayers

2006 ◽  
Vol 929 ◽  
Author(s):  
S. Budak ◽  
B. Zheng ◽  
C. Muntele ◽  
Z. Xiao ◽  
I. Muntele ◽  
...  
Keyword(s):  
Thermal Conductivity ◽  
Seebeck Coefficient ◽  
Electric Conductivity ◽  
Figure Of Merit ◽  
Rutherford Backscattering Spectrometry ◽  
Cooling System ◽  
Ion Beam ◽  
Cluster Structure ◽  
Thermoelectric Efficiency ◽  
Before And After

ABSTRACTWe made 50 and 100 periodic nano-layers of electro-cooling system consisting of SiO2/AuxSiO2(1−x) super lattice with Au layer deposited on both side as metal contact using Ion Beam Assisted Deposition (IBAD) system. The deposited multi-layer films have a periodic structure consisting of alternating layers where each layer is between 1-10 nm thick. The ultimate objective of this research is to tailor the figure of merit of layered structures used as thermoelectric generators. The super lattices were then bombarded by 5 MeV Si ion at different four fluences to form nano-cluster structure. The film thickness and stoichiometry were monitored by Rutherford Backscattering Spectrometry (RBS) before and after MeV bombardments. We measured the thermoelectric efficiency of the fabricated device before and after MeV bombardments. To accomplish this we measured the cross plane thermal conductivity by 3rd harmonic method, measured cross plane Seebeck coefficient, and measured electric conductivity using Van Der Pauw method before and after 5 MeV Si Bombardments. As predicted the electronic energy deposited due to ionization by MeV Si beam in its track produces nano-scale structures which disrupt and confine phonon transmission therefore reducing thermal conductivity, increasing electron density of state so as to increase Seebeck coefficient, and electric conductivity, thus increasing figure of merit. We will present our findings during the meeting.* Research sponsored by the Center for Irradiation of Materials, Alabama A&M University and by the AAMURI Center for Advanced Propulsion Materials under the contract number NAG8-1933 from NASA, and by National Science Foundation under Grant No. EPS-0447675.

Investigation of Thermoelectric Materials: Substitution effect of Bi on the Ag1-xPb18MTe20 (M = Sb, Bi) (x = 0, 0.14, 0.3)

2007 ◽  
Vol 1044 ◽  
Author(s):  
Mi-kyung Han ◽  
Huijun Kong ◽  
Ctirad Uher ◽  
Mercouri G Kanatzidis
Keyword(s):  
Thermal Conductivity ◽  
Electrical Conductivity ◽  
Seebeck Coefficient ◽  
Thermoelectric Materials ◽  
Figure Of Merit ◽  
Lattice Thermal Conductivity ◽  
Substitution Effect ◽  
Dimensionless Figure Of Merit ◽  
The Matrix ◽  
Mass Fluctuation

AbstractWe performed comparative investigations of the Ag1-xPb18MTe20 (M = Bi, Sb) (x = 0, 0.14, 0.3) system to better understand the roles of Sb and Bi on the thermoelectric properties. In both systems, the electrical conductivity nearly keeps the same values, while the Seebeck coefficient decreases dramatically in going from Sb to Bi. Compared to the lattice thermal conductivity of PbTe, that of AgPb18BiTe20 is substantially reduced. The lattice thermal conductivity of the Bi analog, however, is higher than that of AgPb18SbTe20 and this is attributed largely to the decrease in the degree of mass fluctuation between the nanostructures and the matrix (for the Bi analog). As a result the dimensionless figure of merit ZT of Ag1-xPb18MTe20 (M = Bi) is found to be smaller than that of Ag1-xPb18MTe20 (M = Sb).

Thermoelectric Properties of n-type (Bi2Se3)x(Bi2Te3)1-x Crystals Prepared by Zone Melting

2008 ◽  
Vol 368-372 ◽  
pp. 547-549
Author(s):  
Jun Jiang ◽  
Ya Li Li ◽  
Gao Jie Xu ◽  
Ping Cui ◽  
Li Dong Chen
Keyword(s):  
Thermal Conductivity ◽  
Electrical Conductivity ◽  
Seebeck Coefficient ◽  
Carrier Concentration ◽  
Thermoelectric Properties ◽  
Figure Of Merit ◽  
Zone Melting ◽  
Chemical Compositions ◽  
Melting Method ◽  
Temperature Range

In the present study, n-type (Bi2Se3)x(Bi2Te3)1-x crystals with various chemical compositions were fabricated by the zone melting method. Thermoelectric properties, including Seebeck coefficient (α), electrical conductivity (σ) and thermal conductivity (κ), were measured in the temperature range of 300-500 K. The influence of the variations of Bi2Te3 and Bi2Se3 content on thermoelectric properties was studied. The increase of Bi2Se3 content (x) caused an increase in carrier concentration and thus an increase of σ and a decrease of α. The maximum figure of merit (ZT = α2σT/κ) of 0.87 was obtained at about 325 K for the composition of 93%Bi2Te3-7%Bi2Se3 with doping TeI4.

Effects of MeV Si Ions Modification on the Thermoelectric Properties of SiO2/SiO2+Cu Multilayer Thin Films

2010 ◽  
Vol 1267 ◽  
Author(s):  
John Chacha ◽  
S. Budak ◽  
Cydale Smith ◽  
Marcus Pugh ◽  
Kudus Ogbara ◽  
...  
Keyword(s):  
Thin Films ◽  
Thermal Conductivity ◽  
Electrical Conductivity ◽  
Seebeck Coefficient ◽  
Ion Beam ◽  
Absolute Temperature ◽  
Conductivity Increase ◽  
Before And After ◽  
The Cross ◽  
Thermoelectric Thin Films

AbstractThe performance of the thermoelectric materials and devices is shown by a dimensionless figure of merit, ZT = S2σT/K, where S is the Seebeck coefficient, σ is the electrical conductivity, T is the absolute temperature and K is the thermal conductivity. ZT can be increased by increasing S, increasing σ, or decreasing K. We have prepared 100 alternating multi-nano layer of SiO2/SiO2+Cu superlattice films using the ion beam assisted deposition (IBAD). The 5 MeV Si ions bombardments have been performed at the different fluences using the AAMU Pelletron ion beam accelerator to make quantum clusters in the multi-layer superlattice thin films to decrease the cross plane thermal conductivity increase the cross plane Seebeck coefficient and cross plane electrical conductivity. To characterize the thermoelectric thin films before and after Si ion bombardments we have measured the cross-plane Seebeck coefficient, the cross-plane electrical conductivity, and the cross-plane thermal conductivity for different fluences.

Synthesis and Thermoelectric Properties of Co4-XFeXSb12-YSnY Skutterudites

2011 ◽  
Vol 695 ◽  
pp. 65-68 ◽  
Author(s):  
Kwan Ho Park ◽  
Il Ho Kim
Keyword(s):  
Thermal Conductivity ◽  
Electrical Conductivity ◽  
Seebeck Coefficient ◽  
Thermoelectric Properties ◽  
Figure Of Merit ◽  
Phonon Scattering ◽  
Charge Compensation ◽  
Fe Doping ◽  
Sn Doping ◽  
Double Doping

Co4-xFexSb12-ySny skutterudites were synthesized by mechanical alloying and hot pressing, and thermoelectric properties were examined. The carrier concentration increased by doping and thereby the electrical conductivity increased compared with intrinsic CoSb3. Every specimen had a positive Seebeck coefficient. Fe doping caused a decrease in the Seebeck coefficient but it could be enhanced by Fe/Sn double doping possibly due to charge compensation. The thermal conductivity was desirably very low and this originated from ionized impurity-phonon scattering. Thermoelectric properties were improved remarkably by Fe/Sn doping, and a maximum figure of merit, ZT = 0.5 was obtained at 723 K in the Co3FeSb11.2Sn0.8 specimen.

Effect of Nanocavities on the Thermoelectric Properties of Polycrystalline Silicon

2011 ◽  
Vol 1329 ◽  
Author(s):  
Ekaterina Selezneva ◽  
Andrea Arcari ◽  
Gilles Pernot ◽  
Elisabetta Romano ◽  
Gianfranco Cerofolini ◽  
...  
Keyword(s):  
Thermal Conductivity ◽  
Electrical Conductivity ◽  
Seebeck Coefficient ◽  
Thermoelectric Properties ◽  
Polycrystalline Silicon ◽  
Figure Of Merit ◽  
Annealing Temperature ◽  
Silicon Films ◽  
Negative Effect ◽  
Polycrystalline Silicon Films

ABSTRACTNanostructuring has opened new ways to increase the thermoelectric performance of a host of materials, mainly by decreasing their thermal conductivity κ while preserving the Seebeck coefficient S and electrical conductivity σ. The thermoelectric properties of degenerated polycrystalline silicon films with nanocavities (NCs) have been studied as a function of annealing temperature upon isochronous annealings in argon carried out every 50°C in the range 500 – 1000°C which were used to modify the shape of the NCs. We found that presence of the NCs had no negative effect on the electronic properties of the system. The measured values of S and σ were close to those previously reported for the blank polycrystalline silicon films with the same doping level. The thermal conductivity was also found to be close to the value measured on the blank sample, about half of the reported value in polycrystals. This led to a power factor of 15.2 mWm-1K-2 and a figure of merit of 0.18 at 300 K.

Sign in / Sign up

Export Citation Format

Share Document