Application Of Ai Control To The Vls Sic Whisker Process

1989 ◽  
Vol 168 ◽  
Author(s):  
Peter D. Shalek ◽  
W. J. Parkinson
Keyword(s):  
Expert System ◽  
Scale Up ◽  
Chemical Properties ◽  
Batch Process ◽  
Rule Base ◽  
Two Phase ◽  
Operator Functions ◽  
Sic Whiskers ◽  
Set Up ◽  
The Many

AbstractSilicon carbide whiskers have excellent mechanical and chemical properties, making them very desirable as a reinforcement for structural ceramic and other composite materials. Los Alamos has developed a laboratoryscale batch process for producing very high quality SiC whiskers by the vapor-liquid-solid (VLS) method which is an active candidate for technology transfer involving significant scale-up. The process, however, involves quite complex chemical/physical and parametric relationships and has not as yet lent itself successfully to modeling. An expert computer system was therefore developed to facilitate the transfer of this technology to industry. Optimum conditions were determined by relating the many process parameters to product results to establish a set of rules for running the process. These are incorporated in a two-phase expert system designed to guide inexperienced users. In Phase I, an expert consultant program provides the user with information that enables him to set up the run. This information is incorporated into the rule base that makes up Phase II- the control system. At present, the operator functions as the controller by responding to the decisions of the expert system; automation can be added later.

scholarly journals A new methodology for monitoring P. oceanica meadows in Tavolara Punta Coda Cavallo MPA using GIS

2015 ◽  
Author(s):  
Pieraugusto Panzalis ◽  
Andrea Deiana ◽  
Sarah Caronni ◽  
Augusto Navone
Keyword(s):  
Scale Up ◽  
Continuous Mapping ◽  
Detailed Knowledge ◽  
Regular Grid ◽  
Side Scan Sonar ◽  
Sea Bottom ◽  
The Status ◽  
Square Cells ◽  
Set Up ◽  
The Many

Marine Protected Areas (MPAs) are acknowledged globally as effective tools for the protection and management of the marine environment; however, to get effective results it is necessary to set up a proper and continuous mapping of the marine territory, in order to gain detailed knowledge of its different aspects. Therefore, the implementation and maintenance of a modern GIS (Geographic Information System) has become an indispensable task for the MPA of Tavolara - Punta Coda Cavallo to collect, aggregate, classify, and track the conducted mapping activities. Between 2011 and 2012 the sea bottom of the MPA was surveyed using different methods: by means of a multi-beam echo sounder and of a side scan sonar, as well as conducting fast scientific scuba divings with re-breathers and underwater position system technologies. High resolution geodatasets, characterized by a significantly high quality in representing and describing the sea bottom and its habitats, were produced in both feature (scale up to 1:1.250) and raster formats (up to 30cm/pixel for sonar images and 1m/pixel for bathymetry) and they currently constitute the basis of the MPA's GIS, including its 3D applications and its web map services for desktop and mobile devices (iPhone & Android). To update the above described geodatasets during time, acquiring new data on the conservation targets considered in monitoring activities, among which the status of P. oceanica meadows is of the most important ones, a long term mapping plan was realized on the basis of an innovative methodology elaborated by the MPA considering both the wideness of the area and the limited funds available at present. The whole MPA was divided in territorial units by means of a regular grid of square cells having a 100m side with the logic of starting the mapping activities from the mainly important areas and then to spread the surveys up to fill the whole mosaic. All the new data acquired with this methodology could then be mixed, compared and indexed within the same cell and/or in the many already available geodatases, starting from those dated 2006 having a regular grid with square cells of 500m per side.

scholarly journals A new methodology for monitoring P. oceanica meadows in Tavolara Punta Coda Cavallo MPA using GIS

2015 ◽  
Author(s):  
Pieraugusto Panzalis ◽  
Andrea Deiana ◽  
Sarah Caronni ◽  
Augusto Navone
Keyword(s):  
Scale Up ◽  
Continuous Mapping ◽  
Detailed Knowledge ◽  
Regular Grid ◽  
Side Scan Sonar ◽  
Sea Bottom ◽  
The Status ◽  
Square Cells ◽  
Set Up ◽  
The Many

Marine Protected Areas (MPAs) are acknowledged globally as effective tools for the protection and management of the marine environment; however, to get effective results it is necessary to set up a proper and continuous mapping of the marine territory, in order to gain detailed knowledge of its different aspects. Therefore, the implementation and maintenance of a modern GIS (Geographic Information System) has become an indispensable task for the MPA of Tavolara - Punta Coda Cavallo to collect, aggregate, classify, and track the conducted mapping activities. Between 2011 and 2012 the sea bottom of the MPA was surveyed using different methods: by means of a multi-beam echo sounder and of a side scan sonar, as well as conducting fast scientific scuba divings with re-breathers and underwater position system technologies. High resolution geodatasets, characterized by a significantly high quality in representing and describing the sea bottom and its habitats, were produced in both feature (scale up to 1:1.250) and raster formats (up to 30cm/pixel for sonar images and 1m/pixel for bathymetry) and they currently constitute the basis of the MPA's GIS, including its 3D applications and its web map services for desktop and mobile devices (iPhone & Android). To update the above described geodatasets during time, acquiring new data on the conservation targets considered in monitoring activities, among which the status of P. oceanica meadows is of the most important ones, a long term mapping plan was realized on the basis of an innovative methodology elaborated by the MPA considering both the wideness of the area and the limited funds available at present. The whole MPA was divided in territorial units by means of a regular grid of square cells having a 100m side with the logic of starting the mapping activities from the mainly important areas and then to spread the surveys up to fill the whole mosaic. All the new data acquired with this methodology could then be mixed, compared and indexed within the same cell and/or in the many already available geodatases, starting from those dated 2006 having a regular grid with square cells of 500m per side.

THE MECHANISM OF RAISING AND QUANTIFICATION OF SPECIFIC HEAT FLUX AT BOILING OF NANOFLUIDS IN FREE CONVECTION CONDITIONS

2017 ◽  
pp. 25-34
Author(s):  
V.N. Moraru
Keyword(s):  
Heat Transfer ◽  
Heat Flux ◽  
Heat Capacity ◽  
Specific Heat ◽  
Chemical Properties ◽  
Heating Surface ◽  
Physical Models ◽  
Superheated Liquid ◽  
Two Phase ◽  
Boiling Process

The results of our work and a number of foreign studies indicate that the sharp increase in the heat transfer parameters (specific heat flux q and heat transfer coefficient _) at the boiling of nanofluids as compared to the base liquid (water) is due not only and not so much to the increase of the thermal conductivity of the nanofluids, but an intensification of the boiling process caused by a change in the state of the heating surface, its topological and chemical properties (porosity, roughness, wettability). The latter leads to a change in the internal characteristics of the boiling process and the average temperature of the superheated liquid layer. This circumstance makes it possible, on the basis of physical models of the liquids boiling and taking into account the parameters of the surface state (temperature, pressure) and properties of the coolant (the density and heat capacity of the liquid, the specific heat of vaporization and the heat capacity of the vapor), and also the internal characteristics of the boiling of liquids, to calculate the value of specific heat flux q. In this paper, the difference in the mechanisms of heat transfer during the boiling of single-phase (water) and two-phase nanofluids has been studied and a quantitative estimate of the q values for the boiling of the nanofluid is carried out based on the internal characteristics of the boiling process. The satisfactory agreement of the calculated values with the experimental data is a confirmation that the key factor in the growth of the heat transfer intensity at the boiling of nanofluids is indeed a change in the nature and microrelief of the heating surface. Bibl. 20, Fig. 9, Tab. 2.

INVESTIGATION OF EROSION RESISTANCE OF GRAY-BROWN SOILS IN THE SOUTHEASTERN SLOPES OF THE GREATER CAUCASUS

2020 ◽  
pp. 47-49
Author(s):  
Aliyev Z.H.
Keyword(s):  
Erosion Resistance ◽  
Preventive Measures ◽  
Chemical Properties ◽  
Anthropogenic Factors ◽  
Erosion Process ◽  
Greater Caucasus ◽  
Sloping Lands ◽  
Set Up ◽  
Physical And Chemical ◽  
And Chemical Properties

In recent years, sharp changes have occurred in the state of sloping lands of Azerbaijan. There was tension from the influence of the anthropogenic factors on the mountain slopes. The fact that the erosion process is rein-forced in the research site. Due to lack of agrotechnical measures on the slopes erosion process has been strength-ened, soil flooded with soil, physical and chemical properties of the soil have deteriorated, nutritional elements are reduced, vegetation is reduced and destruction limit. For some reason, the purpose of the research was Aqsu, two land cuts were set up to determine the degree of actual erosion in the Qizmeydan village. prevent erosion intensity, take preventive measures to take and implement appropriate measures.

PENGGUNAAN AIR SUPER KRITIS PADA DEPOLIMERISASI NYLON-12 (BATCH PROCESS)

2018 ◽  
Vol 5 (3) ◽  
Author(s):  
Mohamad Yusman
Keyword(s):  
Supercritical Water ◽  
Scale Up ◽  
Experimental Studies ◽  
Reaction System ◽  
Batch Process ◽  
Chemical Recycling ◽  
Water Decomposition ◽  
Product Distributions ◽  
New Process ◽  
Nylon 12

Water at the supercritical state is a new process for the chemical recycling. At this thermodynamic state i.e. Pc = 218 atmospheres and Tc = 374oC , water behaves very differently from its everyday temperament and it is a very good solvent for organic components. Experimental studies show that supercritical water can decompose hydrocarbons/polymers and produce useful products like 2-Azacyclotridecanone /lactam-1 from Nylon-12 (batch process). The decomposition process itself was carried out in batch reaction system in order to get more information about product distributions, time dependence, and scale-up possibilities.Keywords: supercritical water, decomposition, batch, polymer, hydrocarbon

A new approximate belief rule base expert system for complex system modelling

2021 ◽  
pp. 113558
Author(s):  
You Cao ◽  
Zhijie Zhou ◽  
Changhua Hu ◽  
Shuaiwen Tang ◽  
Jie Wang
Keyword(s):  
Complex System ◽  
Expert System ◽  
Rule Base ◽  
System Modelling ◽  
Belief Rule Base

scholarly journals Reactive plasma cleaning and restoration of transition metal dichalcogenide monolayers

2021 ◽  
Vol 5 (1) ◽  
Author(s):  
Daniil Marinov ◽  
Jean-François de Marneffe ◽  
Quentin Smets ◽  
Goutham Arutchelvan ◽  
Kristof M. Bal ◽  
...  
Keyword(s):  
High Temperature ◽  
Transition Metal ◽  
Field Effect Transistors ◽  
Removal Rate ◽  
2D Materials ◽  
Scale Up ◽  
Transition Metal Dichalcogenides ◽  
Chemical Properties ◽  
Plasma Cleaning ◽  
Transition Metal Dichalcogenide

AbstractThe cleaning of two-dimensional (2D) materials is an essential step in the fabrication of future devices, leveraging their unique physical, optical, and chemical properties. Part of these emerging 2D materials are transition metal dichalcogenides (TMDs). So far there is limited understanding of the cleaning of “monolayer” TMD materials. In this study, we report on the use of downstream H2 plasma to clean the surface of monolayer WS2 grown by MOCVD. We demonstrate that high-temperature processing is essential, allowing to maximize the removal rate of polymers and to mitigate damage caused to the WS2 in the form of sulfur vacancies. We show that low temperature in situ carbonyl sulfide (OCS) soak is an efficient way to resulfurize the material, besides high-temperature H2S annealing. The cleaning processes and mechanisms elucidated in this work are tested on back-gated field-effect transistors, confirming that transport properties of WS2 devices can be maintained by the combination of H2 plasma cleaning and OCS restoration. The low-damage plasma cleaning based on H2 and OCS is very reproducible, fast (completed in a few minutes) and uses a 300 mm industrial plasma etch system qualified for standard semiconductor pilot production. This process is, therefore, expected to enable the industrial scale-up of 2D-based devices, co-integrated with silicon technology.

scholarly journals Electrospinning: A promising technique for drug delivery systems

2020 ◽  
Vol 59 (1) ◽  
pp. 441-454
Author(s):  
Carlos A. Martínez-Pérez
Keyword(s):  
Drug Delivery ◽  
Drug Delivery Systems ◽  
Chemical Properties ◽  
Delivery Systems ◽  
Extrinsic Factor ◽  
Promising Technique ◽  
Physical Chemical ◽  
Set Up ◽  
Final System ◽  
Intense Research

AbstractIn the last years, electrospinning has become a technique of intense research to design and fabricate drug delivery systems (DDS), during this time a vast variety of DDS with mainly electrospun polymers and many different active ingredient(s) have been developed, many intrinsic and extrinsic factor have influence in the final system, there are those that can be attributed to the equipment set up and that to the physical-chemical properties of the used materials in the fabrication of DDS. After all, this intense research has generated a great amount of DDS loaded with one or more drugs. In this manuscript a review with the highlights of different kind of systems for drug delivery systems is presented, it includes the basic concepts of electrospinning, types of equipment set up, polymer/drug systems, limitations and challenges that need to be overcome for clinical applications.

Pump Performance Improvement by Restraining Back Flow in Screw-Type Centrifugal Pump

2005 ◽  
Vol 127 (4) ◽  
pp. 755-762 ◽  
Author(s):  
Yasushi Tatebayashi ◽  
Kazuhiro Tanaka ◽  
Toshio Kobayashi
Keyword(s):  
Pressure Fluctuations ◽  
Centrifugal Pumps ◽  
Two Phase ◽  
Simple Method ◽  
Back Flow ◽  
Pump Performance ◽  
Impeller Outlet ◽  
Pump Head ◽  
The Difference ◽  
Set Up

The authors have been investigating the various characteristics of screw-type centrifugal pumps, such as pressure fluctuations in impellers, flow patterns in volute casings, and pump performance in air-water two-phase flow conditions. During these investigations, numerical results of our investigations made it clear that three back flow regions existed in this type of pump. Among these, the back flow from the volute casing toward the impeller outlet was the most influential on the pump performance. Thus the most important factor to achieve higher pump performance was to reduce the influence of this back flow. One simple method was proposed to obtain the restraint of back flow and so as to improve the pump performance. This method was to set up a ringlike wall at the suction cover casing between the impeller outlet and the volute casing. Its effects on the flow pattern and the pump performance have been discussed and clarified to compare the calculated results with experimental results done under two conditions, namely, one with and one without this ring-type wall. The influence of wall’s height on the pump head was investigated by numerical simulations. In addition, the difference due to the wall’s effect was clarified to compare its effects on two kinds of volute casing. From the results obtained it can be said that restraining the back flow of such pumps was very important to achieve higher pump performance. Furthermore, another method was suggested to restrain back flow effectively. This method was to attach a wall at the trailing edge of impeller. This method was very useful for avoiding the congestion of solids because this wall was smaller than that used in the first method. The influence of these factors on the pump performance was also discussed by comparing simulated calculations with actual experiments.

Effects of high and low doses of methimazole in patients with Graves' thyrotoxicosis

1987 ◽  
Vol 116 (1_Suppl) ◽  
pp. S312-S317 ◽  
Author(s):  
G. Benker ◽  
D. Reinwein ◽  
H. Creutzig ◽  
H. Hirche ◽  
W. D. Alexander ◽  
...  
Keyword(s):  
Antithyroid Drug ◽  
Drug Dosage ◽  
Antithyroid Drugs ◽  
Graves Disease ◽  
Duration Of Treatment ◽  
Disease Heterogeneity ◽  
Remission Rates ◽  
Set Up ◽  
The Many ◽  
The Impact

Abstract. In spite of the long-established use of antithyroid drugs, there are many unsettled questions connected with this treatment of Graves' disease. There is a lack of controlled prospective trials studying the results of antithyroid drug therapy while considering the many variables such as disease heterogeneity, regional differences, drug dosage and duration of treatment. Therefore, a multicenter study has been set up in order to compare the effects of two fixed doses of methimazole (10 vs 40 mg) with thyroid hormone supplementation on the clinical, biochemical and immunological course of Graves' disease and on remission rates. Experience accumulated so far suggests that treatment is safe using either 10 or 40 mg of methimazole. While there is a tendency for an advantage of the higher dose within the first weeks (higher effectiveness in controlling hyperthyroidism), this difference is not significant. The impact of dosage on remission rates remains to be shown.

Sign in / Sign up

Export Citation Format

Share Document