Influence of the Morphology on the Optical Properties of Nanocermet Films: A Renormalization Approach

1990 ◽  
Vol 195 ◽  
Author(s):  
S. Berthier ◽  
K. Driss-Khodja
Keyword(s):  
Optical Properties ◽  
Critical Exponents ◽  
Inhomogeneous Media ◽  
Experimental Results ◽  
Percolation Transition ◽  
Position Space ◽  
Renormalization Approach ◽  
2D And 3D ◽  
Good Agreement ◽  
Effective Medium Models

ABSTRACTIn order to take into account the actual morphology of the inhomogeneous media, we have developed, effective medium models based on a 2D and 3D position space renormalization /1,2/. These models predict the dipolar resonance and the percolation transition with critical exponents in good agreement with theoretical values and fairly reproduce most of the experimental results, whatever the concentration is. Further more, this allows a valuable comparison of the predictions of our models when applied on different lattices like real digitized TEM of cermet films or randomly occupied lattices.

Effects of changing the M2+ cation on the crystal structure and optical properties of divalent samarium-doped MAl2Si2O8 (M = Ca, Sr, Ba)

RSC Advances ◽  
2015 ◽  
Vol 5 (25) ◽  
pp. 19734-19742 ◽  
Author(s):  
Ling Li ◽  
Xiaoguang Liu
Keyword(s):  
Crystal Structure ◽  
Optical Properties ◽  
Theoretical Analysis ◽  
Experimental Results ◽  
Photoluminescence Properties ◽  
Good Agreement

The photoluminescence properties and theoretical analysis of Sm2+ doped MAl2Si2O8 (M = Ca, Sr, Ba) were reported. The theoretical analysis is in good agreement with our experimental results.

scholarly journals DFT and TB-mBJLDA studies of structural, electronic and optical properties of Hg1-xCdxTe and Hg1-xZnxTe

2021 ◽  
Vol 67 (6 Nov-Dec) ◽  
Author(s):  
N. Aouail ◽  
M. Noureddine Belkaid ◽  
A. Oukebdane ◽  
M. Hocine Tedjini
Keyword(s):  
Optical Properties ◽  
Dielectric Function ◽  
Optical Constants ◽  
Lattice Parameter ◽  
Lattice Parameters ◽  
Experimental Results ◽  
Gap Energy ◽  
Better Than ◽  
Good Agreement ◽  
Semiconductor Properties

In this paper, the fundamental semiconductor properties of Hg1-xCdxTe and Hg1-xZnxTe are investigated by ab initio calculations based on the FP-LAPW method.   Structural properties have been calculated using LDA and GGA approximations. The electronic properties are studied using the LDA and GGA approximations, and the potential TB-mBJLDA coupled with the lattice parameters aLDA and aGGA. The optical properties are determined from the optimal gap energies based on the TB-mBJLDA potential. Lattice parameters aLDA obtained by the LDA calculations predict values that are in good agreement with the experimental results and are better than those results obtained by the GGA calculations.  The use of TB-mBJLDA potential coupled with the lattice parameter aGGA gives gap energy values in good agreement with the experimental results for all alloys except  Hg1-xZnxTe (x=0.5, 0.75) where the (TB-mBJ LDA+aLDA) is more suitable. Optical constants are calculated from the dielectric function in the energy range (0-30 eV).  The spectrum of real and imaginary parts of the dielectric function, the energy loss function, the refractive index, the extinction coefficient, the absorption coefficient, and the reflectivity show that optical properties of Hg1-xCdxTe are comparable to those of  Hg1-xZnxTe. Our results are found to be in reasonable agreement with existing data reported in the literature.

Inducing Frictional Force to Enhance the Transient Response in Beams

2019 ◽  
Vol 22 (2) ◽  
pp. 88-93
Author(s):  
Hamed Khanger Mina ◽  
Waleed K. Al-Ashtrai
Keyword(s):  
Numerical Analysis ◽  
Transient Response ◽  
Frictional Force ◽  
Damping Ratio ◽  
Experimental Results ◽  
Damping Capacity ◽  
Tightening Force ◽  
Contact Areas ◽  
Good Agreement ◽  
Ansys Workbench

This paper studies the effect of contact areas on the transient response of mechanical structures. Precisely, it investigates replacing the ordinary beam of a structure by two beams of half the thickness, which are joined by bolts. The response of these beams is controlled by adjusting the tightening of the connecting bolts and hence changing the magnitude of the induced frictional force between the two beams which affect the beams damping capacity. A cantilever of two beams joined together by bolts has been investigated numerically and experimentally. The numerical analysis was performed using ANSYS-Workbench version 17.2. A good agreement between the numerical and experimental results has been obtained. In general, results showed that the two beams vibrate independently when the bolts were loosed and the structure stiffness is about 20 N/m and the damping ratio is about 0.008. With increasing the bolts tightening, the stiffness and the damping ratio of the structure were also increased till they reach their maximum values when the tightening force equals to 8330 N, where the structure now has stiffness equals to 88 N/m and the damping ratio is about 0.062. Beyond this force value, increasing the bolts tightening has no effect on stiffness of the structure while the damping ratio is decreased until it returned to 0.008 when the bolts tightening becomes immense and the beams behave as one beam of double thickness.

PHOTOINDUCED NONLINEAR OCTUPOLAR POLARIZATION: TRANSIENT AND PERMANENT REGIMES

1996 ◽  
Vol 05 (04) ◽  
pp. 653-670 ◽  
Author(s):  
CÉLINE FIORINI ◽  
JEAN-MICHEL NUNZI ◽  
FABRICE CHARRA ◽  
IFOR D.W. SAMUEL ◽  
JOSEPH ZYSS
Keyword(s):  
Theoretical Analysis ◽  
Second Harmonic ◽  
Experimental Results ◽  
Polar Field ◽  
Rotational Spectrum ◽  
Dual Frequency ◽  
One Dimensional ◽  
Ethyl Violet ◽  
Disperse Red 1 ◽  
Good Agreement

An original poling method using purely optical means and based on a dual-frequency interference process is presented. We show that the coherent superposition of two beams at fundamental and second-harmonic frequencies results in a polar field with an irreducible rotational spectrum containing both a vector and an octupolar component. This enables the method to be applied even to molecules without a permanent dipole such as octupolar molecules. After a theoretical analysis of the process, we describe different experiments aiming at light-induced noncentrosymmetry performed respectively on one-dimensional Disperse Red 1 and octupolar Ethyl Violet molecules. Macroscopic octupolar patterning of the induced order is demonstrated in both transient and permanent regimes. Experimental results show good agreement with theory.

scholarly journals Transparent TiO2/Cu/TiO2 Multilayer for Electrothermal Application

Materials ◽  
2021 ◽  
Vol 14 (4) ◽  
pp. 1024
Author(s):  
Jingjing Peng ◽  
Changshan Hao ◽  
Hongyan Liu ◽  
Yue Yan
Keyword(s):  
Optical Properties ◽  
Heating Rate ◽  
Figure Of Merit ◽  
Annealing Temperature ◽  
Critical Thickness ◽  
Experimental Results ◽  
Tio2 Layer ◽  
Electrical And Optical Properties ◽  
Partial Crystallization

Highly transparent indium-free multilayers of TiO2/Cu/TiO2 were obtained by means of annealing. The effects of Cu thickness and annealing temperature on the electrical and optical properties were investigated. The critical thickness of Cu mid-layer with optimal electrical and optical properties was 10 nm, with the figure of merit reaching as high as 5 × 10−3 Ω−1. Partial crystallization of the TiO2 layer enhanced the electrical and optical properties upon annealing. Electrothermal experiments showed that temperatures of more than 100 °C can be reached at a heating rate of 2 °C/s without any damage to the multilayers. The experimental results indicate that reliable transparent TiO2/Cu/TiO2 multilayers can be used for electrothermal application.

scholarly journals Comparison of Experimental and Numerical Transient Drop Deformation during Transition through Orifices in High-Pressure Homogenizers

2021 ◽  
Vol 5 (3) ◽  
pp. 32
Author(s):  
Benedikt Mutsch ◽  
Peter Walzel ◽  
Christian J. Kähler
Keyword(s):  
High Pressure ◽  
Visual Analysis ◽  
Imaging Technique ◽  
Extensional Flow ◽  
Droplet Breakup ◽  
Experimental Results ◽  
Drop Deformation ◽  
Droplet Deformation ◽  
Shadow Imaging ◽  
Good Agreement

The droplet deformation in dispersing units of high-pressure homogenizers (HPH) is examined experimentally and numerically. Due to the small size of common homogenizer nozzles, the visual analysis of the transient droplet generation is usually not possible. Therefore, a scaled setup was used. The droplet deformation was determined quantitatively by using a shadow imaging technique. It is shown that the influence of transient stresses on the droplets caused by laminar extensional flow upstream the orifice is highly relevant for the droplet breakup behind the nozzle. Classical approaches based on an equilibrium assumption on the other side are not adequate to explain the observed droplet distributions. Based on the experimental results, a relationship from the literature with numerical simulations adopting different models are used to determine the transient droplet deformation during transition through orifices. It is shown that numerical and experimental results are in fairly good agreement at limited settings. It can be concluded that a scaled apparatus is well suited to estimate the transient droplet formation up to the outlet of the orifice.

Simulation of Sphere’s Motion Induced by Shock Waves

2012 ◽  
Vol 134 (10) ◽  
Author(s):  
Dan Igra ◽  
Ozer Igra ◽  
Lazhar Houas ◽  
Georges Jourdan
Keyword(s):  
Shock Waves ◽  
Drag Coefficient ◽  
Drag Force ◽  
Stationary Flow ◽  
Experimental Results ◽  
Experimental Findings ◽  
Sphere Drag ◽  
Simulation Scheme ◽  
Good Agreement

Simulations of experimental results appearing in Jourdan et al. (2007, “Drag Coefficient of a Sphere in a Non-Stationary Flow: New Results,”Proc. R. Soc. London, Ser. A, 463, pp. 3323–3345) regarding acceleration of a sphere by the postshock flow were conducted in order to find the contribution of the various parameters affecting the sphere drag force. Based on the good agreement found between present simulations and experimental findings, it is concluded that the proposed simulation scheme could safely be used for evaluating the sphere’s motion in the postshock flow.

Viscoelastic Deformation of PC/ABS Alloy

2007 ◽  
Vol 353-358 ◽  
pp. 1229-1232
Author(s):  
Z.N. Yin ◽  
L.F. Fan ◽  
Tie Jun Wang
Keyword(s):  
Dynamic Mechanical Analysis ◽  
Relaxation Modulus ◽  
Mechanical Analysis ◽  
Experimental Results ◽  
Viscoelastic Deformation ◽  
Dynamic Mechanical ◽  
Storage And Loss Moduli ◽  
Static Relaxation ◽  
Comparison Of The Results ◽  
Good Agreement

Dynamic Mechanical Analysis (DMA) and static relaxation tests are carried out to study the viscoelastic deformation of PC/ABS alloy with blending ratio of PC to ABS being 50/50. A modified approach is developed to calculate the relaxation modulus of PC/ABS alloy from the DMA experimental results of storage and loss moduli. Comparison of the results obtained from DMA and static relaxation tests is presented and good agreement is found.

Sign in / Sign up

Export Citation Format

Share Document