Characterization of the Phase Transformations in the Shape Memory Alloy Ni-36 at.% Al

1991 ◽  
Vol 246 ◽  
Author(s):  
J.A. Horton ◽  
E.P. George ◽  
C.J. Sparks ◽  
M.Y. Kao ◽  
O.B. Cavin ◽  
...  
Keyword(s):  
High Temperature ◽  
Shape Memory ◽  
Phase Transformations ◽  
Hot Extrusion ◽  
Exothermic Peak ◽  
Nickel Aluminum ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
X Ray ◽  
Transmission Electron

AbstractA survey by differential scanning calorimetry (DSC) and recovery during heating of indentations on a series of nickel-aluminum alloys showed that the Ni-36 at.% Al composition has the best potential for a recoverable shape memory effect at temperatures above 100°C. The phase transformations were studied by high temperature transmission electron microscopy (TEM) and by high temperature x-ray diffraction (HTXRD). Quenching from 1200°C resulted in a single phase, fully martensitic structure. The initial quenched-in martensites were found by both TEM and X-ray diffraction to consist of primarily a body centered tetragonal (bct) phase with some body centered orthorhombic (bco) phase present. On the first heating cycle, DSC showed an endothermic peak at 121°C and an exothermic peak at 289°C, and upon cooling a martensite exothermic peak at 115° C. Upon subsequent cycles the 289°C peak disappeared. High temperature X-ray diffraction, with a heating rate of 2°C/min, showed the expected transformation of bct phase to B2 between 100 and 200°C, however the bco phase remained intact. At 400 to 450°C the B2 phase transformed to Ni2Al and Ni5Al3. During TEM heating experiments a dislocation-free martensite transformed reversibly to B2 at temperatures less than 150°C. At higher temperatures (nearly 600°C) 1/3, 1/3, 1/3 reflections from an ω-like phase formed. Upon cooling, the 1/3, 1/3, 1/3 reflections disappeared and a more complicated martensite resulted. Boron additions suppressed intergranular fracture and, as expected, resulted in no ductility improvements. Boron additions and/or hot extrusion encouraged the formation of a superordered bct structure with 1/2, 1/2, 0 reflections.

scholarly journals Application of in-situ nano-scanning calorimetry and X-ray diffraction to characterize Ni–Ti–Hf high-temperature shape memory alloys

2015 ◽  
Vol 603 ◽  
pp. 53-62 ◽  
Author(s):  
Patrick J. McCluskey ◽  
Kechao Xiao ◽  
John M. Gregoire ◽  
Darren Dale ◽  
Joost J. Vlassak
Keyword(s):  
High Temperature ◽  
Shape Memory Alloys ◽  
Shape Memory ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
X Ray

scholarly journals Effects of Sintering Temperature on Densification, Microstructure and Mechanical Properties of Al-Based Alloy by High-Velocity Compaction

Metals ◽  
2021 ◽  
Vol 11 (2) ◽  
pp. 218
Author(s):  
Xianjie Yuan ◽  
Xuanhui Qu ◽  
Haiqing Yin ◽  
Zaiqiang Feng ◽  
Mingqi Tang ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
High Velocity ◽  
Sintered Density ◽  
Sintering Temperature ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
X Ray ◽  
Transmission Electron ◽  
High Velocity Compaction ◽  
Sintered Temperature

This present work investigates the effects of sintering temperature on densification, mechanical properties and microstructure of Al-based alloy pressed by high-velocity compaction. The green samples were heated under the flow of high pure (99.99 wt%) N2. The heating rate was 4 °C/min before 315 °C. For reducing the residual stress, the samples were isothermally held for one h. Then, the specimens were respectively heated at the rate of 10 °C/min to the temperature between 540 °C and 700 °C, held for one h, and then furnace-cooled to the room temperature. Results indicate that when the sintered temperature was 640 °C, both the sintered density and mechanical properties was optimum. Differential Scanning Calorimetry, X-ray diffraction of sintered samples, Scanning Electron Microscopy, Energy Dispersive Spectroscopy, and Transmission Electron Microscope were used to analyse the microstructure and phases.

scholarly journals Multiscale Copper-µDiamond Nanostructured Composites

2012 ◽  
Vol 730-732 ◽  
pp. 925-930
Author(s):  
Daniela Nunes ◽  
Vanessa Livramento ◽  
Horácio Fernandes ◽  
Carlos Silva ◽  
Nobumitsu Shohoji ◽  
...  
Keyword(s):  
Pure Copper ◽  
Thermal Stabilization ◽  
Hot Extrusion ◽  
Processing Parameters ◽  
High Energy ◽  
X Ray Diffraction ◽  
X Ray ◽  
Optimal Processing ◽  
Novel Approach ◽  
Transmission Electron

Nanostructured copper-diamond composites can be tailored for thermal management applications at high temperature. A novel approach based on multiscale diamond dispersions is proposed for the production of this type of materials: a Cu-nDiamond composite produced by high-energy milling is used as a nanostructured matrix for further dispersion of micrometer sized diamond. The former offers strength and microstructural thermal stability while the latter provides high thermal conductivity. A series of Cu-nDiamond mixtures have been milled to define the minimum nanodiamond fraction suitable for matrix refinement and thermal stabilization. A refined matrix with homogenously dispersed nanoparticles could be obtained with 4 at.% nanodiamond for posterior mixture with mDiamond and subsequent consolidation. In order to define optimal processing parameters, consolidation by hot extrusion has been carried out for a Cu-nDiamond composite and, in parallel, for a mixture of pure copper and mDiamond. The materials produced were characterized by X-ray diffraction, scanning and transmission electron microscopy and microhardness measurements.

Inosose-Flüssigkristalle / Inosose Liquid Crystals

1990 ◽  
Vol 45 (7) ◽  
pp. 1084-1090 ◽  
Author(s):  
Klaus Praefcke ◽  
Bernd Kohne ◽  
Andreas Eckert ◽  
Joachim Hempel
Keyword(s):  
Differential Scanning Calorimetry ◽  
Liquid Crystal ◽  
High Temperature ◽  
Liquid Crystalline ◽  
Structural Features ◽  
Lyotropic Liquid Crystal ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
X Ray ◽  
Alkyl Chains

Six S,S-dialkyl acetals 2a-f of inosose (1), tripodal in structure, have been synthesized, characterized and investigated by optical microscopy and differential scanning calorimetry (d.s.c.). The four S,S-acetals 2c-f with sufficiently long alkyl chains are thermotropic liquid crystalline; 2 e and 2 f are even dithermomesomorphic. Each of these four inosose derivatives 2c-f exhibits monotropically a most likely cubic mesophase (MI); in addition 2e and 2f show enantiotropically a hexagonal mesophase (Hx) with a non-covalent, supramolecular H-bridge architecture. Whereas the nature of the optically isotropic mesophase MI needs further clarification the stable high temperature mesophase Hx of 2 e and 2 f has been established by a miscibility test using a sugar S,S-dialkyl acetal also tripodal in structure and with a Hx phase proved by X-ray diffraction, but in contrast to 2 with an acyclic hydrophilic part. Similarities of structural features between the Hx-phases of 2e and 2f as well as of other thermotropic and lyotropic liquid crystal systems are discussed briefly.

Effect of the Pulse Laser Radiation on the Stabilization of the ZrO2 and HFO2 High-Temperature Phases

2015 ◽  
Vol 245 ◽  
pp. 200-203 ◽  
Author(s):  
Maxim Alexandrovich Pugachevskii ◽  
Viktor Igorevich Panfilov
Keyword(s):  
High Temperature ◽  
Transmission Electron Microscopy Data ◽  
X Ray Diffraction ◽  
X Ray ◽  
Good Thermal Stability ◽  
Quantitative Content ◽  
Electron Microscopy Data ◽  
Cubic Phases ◽  
Transmission Electron ◽  
Microscopy Data

The conditions of formation of the ZrO2 and HfO2 high-temperature (tetragonal and cubic) phases in the ablated nanoparticles were investigated. X-ray diffraction and transmission electron microscopy data demonstrate that laser intensities above 109 W/m2 ensure the formation of the ZrO2 high-temperature phases, while intensities above 5·109 W/m2 do the formation of the HfO2 high-temperature phases. Quantitative content of the high-temperature phases in layers of the ablated nanoparticles increases with raising the intensity. The obtained nanoparticles exhibit good thermal stability.

scholarly journals Nanocrystal, phase transformation and microstructure of Ni50Ti50 shape memory alloy

2018 ◽  
Vol 24 (02) ◽  
pp. 22-25
Author(s):  
Dovchinvanchig M ◽  
Chunwang Zhao
Keyword(s):  
Differential Scanning Calorimetry ◽  
Phase Transformation ◽  
Shape Memory Alloy ◽  
Shape Memory ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
X Ray ◽  
One Step ◽  
Niti Matrix ◽  
Electronic Microscope

The nanocrystal, phase transformation and microstructure behavior of Ni50Ti50 shape memory alloy was investigated by scanning electronic microscope, X-ray diffraction and differential scanning calorimetry. The results showed that the microstructure of Ni-Ti binary alloy consists of the NiTi2 phase and the NiTi matrix phase. One-step phase transformation was observed alloy.

In situ high-temperature X-ray diffraction study of phase transformations in silver behenate

2005 ◽  
Vol 20 (02) ◽  
pp. 94-96 ◽  
Author(s):  
Thomas N. Blanton ◽  
Swavek Zdzieszynski ◽  
Michael Nicholas ◽  
Scott Misture
Keyword(s):  
High Temperature ◽  
Phase Transformations ◽  
Diffraction Study ◽  
X Ray Diffraction ◽  
X Ray

Evaluation of the Mechanical Properties of Glass/Epoxy Composite by Embedding Shape Memory Alloy and Nanoclay

2021 ◽  
Vol 1019 ◽  
pp. 3-11
Author(s):  
Niranjan Pattar ◽  
S.F. Patil ◽  
Pratik Patil ◽  
Iranna Anikivi ◽  
Shridhar Hiremath
Keyword(s):  
Electron Microscopy ◽  
Shape Memory Alloy ◽  
Shape Memory ◽  
Smart Materials ◽  
Epoxy Composite ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Clay Concentration ◽  
Impact Characteristics

Embedding smart materials in the composite to enhance mechanical strength have become a research hotspot owing to their unique properties. The present research also focus on novel way to fabricate composite by embedding Shape Memory Alloy (SMA) wire and montmorillonite (MMT) nanoclay by varying clay concentration (0-7 wt.%). The extent of dispersion of nanoclay in epoxy resin was studied using Transmission Electron Microscopy (TEM) and X-ray diffraction (XRD). Fabricated samples were examined for tensile, flexural and impact characteristics. Scanning Electron Microscopy (SEM) was used to study the adhesion, delamination and damage occurred within the composite due to tensile loading. Results shows that the tensile strength, flexural strength and impact energy of SMA/MMT/glass/epoxy composite was improved by 23%, 21% and 57% respectively, when it was compared with composite with glass/epoxy composite.

scholarly journals Thermal Analysis, Compressibility, and Decomposition of Synthetic Bastnäsite-(La) to Lanthanum Oxyfluoride

Minerals ◽  
2020 ◽  
Vol 10 (3) ◽  
pp. 212
Author(s):  
Richard L. Rowland ◽  
Barbara Lavina ◽  
Kathleen E. Vander Kaaden ◽  
Lisa R. Danielson ◽  
Pamela C. Burnley
Keyword(s):  
High Temperature ◽  
Equation Of State ◽  
Ambient Temperature ◽  
Evolved Gas Analysis ◽  
Ambient Pressure ◽  
Basic Material ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
Thermal Equation ◽  
X Ray

Understanding basic material properties of rare earth element (REE) bearing minerals such as their phase stability and equations of state can assist in understanding how economically viable deposits might form. Bastnäsite is the most commonly mined REE bearing mineral. We synthesized the lanthanum-fluoride end member, bastnäsite-(La) (LaCO3F), and investigated its thermal behavior and decomposition products from 298 K to 1173 K under ambient pressure conditions through thermogravimetric analysis, differential scanning calorimetry, evolved gas analysis, and high temperature powder X-ray diffraction. We also investigated the compressibility of bastnäsite-(La) via single crystal X-ray diffraction in diamond anvil cells at an ambient temperature up to 11.3 GPa and from 4.9 GPa to 7.7 GPa up to 673 K. At ambient pressure, bastnäsite-(La) was stable up to 598 K in air, where it decomposed into CO2 and tetragonal γ-LaOF. Above 948 K, cubic α-LaOF is stable. High temperature X-ray diffraction data were used to fit the Fei thermal equation of state and the thermal expansion coefficient α298 for all three materials. Bastnäsite-(La) was fit from 298 K to 723 K with V0 = 439.82 Å3, α298 = 4.32 × 10−5 K−1, a0 = −1.68 × 10−5 K−1, a1 = 8.34 × 10−8 K−1, and a2 = 3.126 K−1. Tetragonal γ-LaOF was fit from 723 K to 948 K with V0 = 96.51 Å3, α298 = 2.95×10−4 K−1, a0 = −2.41×10−5 K−1, a1 = 2.42×10−7 K−1, and a2 = 41.147 K−1. Cubic α-LaOF was fit from 973 K to 1123 K with V0 = 190.71 Å3, α298 = −1.12×10−5 K−1, a0 = 2.36×10−4 K−1, a1 = −1.73 × 10−7 K−1, and a2 = −17.362 K−1. An ambient temperature third order Birch–Murnaghan equation of state was fit with V0 = 439.82 Å3, K0 = 105 GPa, and K’ = 5.58.

Sign in / Sign up

Export Citation Format

Share Document