New Routes to Group Iva Metal-Nitrides

1992 ◽  
Vol 271 ◽  
Author(s):  
Chaitanya K. Narula
Keyword(s):  
Titanium Nitride ◽  
Molar Ratio ◽  
Metal Nitrides ◽  
Reaction Products ◽  
Reaction Conditions ◽  
Group Iva ◽  
Ammonia Atmosphere

ABSTRACTThe reactions of TiCl4 with [(CH3)3Si]2NH have been examined under several reaction conditions. One of the reaction products, (CH3)3Si(H)NTiCl3, can be crystallized in 60% yield on reacting TiCl4 with TiCl4 with [(CH3)3Si]2NH in a 1:1 molar ratio in dichloromethane at -78°C. [(CH3)3Si(H)NTi(Cl2)(NH)]2TiCl2 is the primary product on increasing the amount of TiCl4 with [(CH3)3Si]2NH to two equivalents. (CH3)3Si(H)NTiCl3 and [(CH3)3Si(H)NTi(Cl2)(NH)]2TiCl2 form titanium nitride on pyrolysis at 600°C in an ammonia atmosphere.

Synthesis, Characterization and Performance of Superplasticizer with a Multi-Arm Structure

2015 ◽  
Vol 815 ◽  
pp. 594-600 ◽  
Author(s):  
Xiao Liu ◽  
Zi Ming Wang ◽  
Jie Zhu ◽  
Ming Zhao ◽  
Yun Sheng Zheng
Keyword(s):  
Acrylic Acid ◽  
The Self ◽  
Molar Ratio ◽  
Esterification Reaction ◽  
Reaction Products ◽  
Reaction Conditions ◽  
H Nmr ◽  
Polyhydric Alcohols ◽  
Esterification Rate ◽  
And Performance

A novel superplasticizer with a multi-arm structure, i.e., a “core” connected with multiple copolymer “arms”, was synthesized through two steps including an esterification reaction between polyhydric alcohols and acrylic acid and a copolymerization reaction in an aqueous solution among the esterification product, isobutenyl polyethylene glycol and acrylic acid. The reaction conditions were determined, and the results showed that the esterification rate can reach above 95% with a water-carrying agent of 70g, a catalyst/alcohol molar ratio of 0.07, an inhibitor/monomer molar ratio of 0.03, and a reaction time of 7 hrs. The reaction products were characterized by 1H Nuclear Magnetic Resonance (1H NMR) and Fourier Transform infrared spectroscopy (FTIR). It is confirmed to be the multi-arm structure, and the self-synthesized superplasticizer with a multi-arm structure exhibited higher energy efficiency, which was in accordance with its excellent paste fluidity performances and adsorption behavior in cement paste

Antimutagenic Effect of Maillard Reaction Products Prepared from Glucose and Tryptophan

1992 ◽  
Vol 55 (8) ◽  
pp. 615-619 ◽  
Author(s):  
GOW-CHIN YEN ◽  
JEN-DAN LII
Keyword(s):  
Maillard Reaction ◽  
Antioxidative Activity ◽  
Reducing Power ◽  
Molar Ratio ◽  
Maillard Reaction Products ◽  
Alkaline Ph ◽  
Reaction Products ◽  
Reaction Conditions ◽  
Antimutagenic Effect ◽  
Effect Of Glucose

The antimutagenicity of Maillard reaction products (MRPs) prepared by refluxing D-glucose and L-tryptophan under various reaction conditions was determined by means of the Ames test. The dose of MRPs with 5 mg per plate showed no toxicity, and mutagenicity to Salmonella typhimurium TA98 and TA100 was used for antimutagenic assay. The mutagenicity of 2-amino-3-methylimidazo (4,5-f) quinoline (IQ) and 2-amino-6-methyldipyrido (1,2-a:3′,2′-d) imidazole (Glu-P-1) toward TA98 was markedly reduced by the addition of glucose-tryptophan MRPs, whereas the mutagenicity of 4-nitroquinoline-N-oxide (NQNO) was not inhibited. The mutagenicity of IQ, Glu-P-1, and NQNO toward TA100 was also markedly reduced by glucose-tryptophan MRPs, but the mutagenicity of NQNO was only slightly inhibited. Greater antimutagenic effects of glucose-tryptophan MRPs were found when these materials were prepared at an alkaline pH. The optimum combinations of reaction conditions for obtaining antimutagenic MRPs to IQ were glucose-tryptophan molar ratio = 0.5:0.25 at pH 9.0 for 5 and 10 h, molar ratio = 0.5:0.5 at pH 11.0 for 10 h, and molar ratio = 1.0:0.25 at pH 7.0 for 15 h and at pH 11.0 for 15 h. The antimutagenic effect of glucose-tryptophan MRPs to IQ and Glu-P-1 was well correlated with their browning intensity, reducing power, and antioxidative activity. The antimutagenicity of glucose-tryptophan MRPs might be due to both desmutagenic and bio-antimutagenic effects.

Study on the Synthesis of Isoamyl Acetate Catalyzed by Strong Acidic Cation Exchange Resin

2011 ◽  
Vol 396-398 ◽  
pp. 2411-2415 ◽  
Author(s):  
Ping Lan ◽  
Li Hong Lan ◽  
Tao Xie ◽  
An Ping Liao
Keyword(s):  
Acetic Acid ◽  
Reaction Time ◽  
Cation Exchanger ◽  
Cation Exchange Resin ◽  
Isoamyl Acetate ◽  
Molar Ratio ◽  
Esterification Reaction ◽  
Reaction Conditions ◽  
Optimum Reaction

Isoamyl acetate was synthesized from isoamylol and glacial acetic acid with strong acidic cation exchanger as catalyst. The effects of reaction conditions such as acid-alcohol ratio, reaction time, catalyst dosage to esterification reaction have been investigated and the optimum reaction conditions can be concluded as: the molar ratio of acetic acid to isoamylol 0.8:1, reaction time 2h, 25 % of catalyst (quality of acetic acid as benchmark). The conversion rate can reach up to 75.46%. The catalytic ability didn’t reduce significantly after reusing 10 times and the results showed that the catalyst exhibited preferably catalytic activity and reusability.

Optimization of biodiesel synthesis under simultaneous ultrasound-microwave irradiation using response surface methodology (RSM)

2015 ◽  
Vol 4 (4) ◽  
Author(s):  
Seyed Mohammad Safieddin Ardebili ◽  
Teymor Tavakoli Hashjin ◽  
Barat Ghobadian ◽  
Gholamhasan Najafi ◽  
Stefano Mantegna ◽  
...  
Keyword(s):  
Response Surface Methodology ◽  
Microwave Irradiation ◽  
Response Surface ◽  
Palm Oil ◽  
Catalyst Concentration ◽  
Irradiation Time ◽  
Operating Conditions ◽  
Molar Ratio ◽  
Reaction Conditions ◽  
Biodiesel Synthesis

AbstractThis work investigates the effect of simultaneous ultrasound-microwave irradiation on palm oil transesterification and uncovers optimal operating conditions. Response surface methodology (RSM) has been used to analyze the influence of reaction conditions, including methanol/palm oil molar ratio, catalyst concentration, reaction temperature and irradiation time on biodiesel yield. RSM analyses indicate 136 s and 129 s as the optimal sonication and microwave irradiation times, respectively. Optimized parameters for full conversion (97.53%) are 1.09% catalyst concentration and a 7:3.1 methanol/oil molar ratio at 58.4°C. Simultaneous ultrasound-microwave irradiation dramatically accelerates the palm oil transesterification reaction. Pure biodiesel was obtained after only 2.2 min while the conventional method requires about 1 h.

Lipase-Catalyzed Acyl-L-Carnitines Synthesis in [Bmim]PF6 Ionic Liquid

2009 ◽  
Vol 5 (1) ◽  
Author(s):  
Jin-qiang Tian ◽  
Qiang Wang ◽  
Zhong-yuan Zhang
Keyword(s):  
Ionic Liquid ◽  
Lipase Activity ◽  
Molecular Sieves ◽  
Reaction Medium ◽  
Molar Ratio ◽  
Reaction Conditions ◽  
Optimal Reaction ◽  
Better Than

In order to significantly improve the biosynthesis of acyl-L-carnitines catalyzed by lipase, there must be an efficient and suitable reaction medium that is not only polar but also hydrophobic. [Bmim]PF6, which satisfies the above two requirements, was applied as the medium. The optimal reaction conditions were: for isovaleryl-L-carnitine, 0.22aW, 200mg molecular sieves, 60ºC, 4:1 of molar ratio (fatty acid:L-carnitine), 150rpm and 60h; for octanoyl-L-carnitine and palmitoyl-L-carnitine, 0.22aW, 250 mg molecular sieves, 5:1 of molar ratio (fatty acid:L-carnitine), 200rpm, 48h, 60ºC (octanoyl-L-carnitine) and 65ºC (palmitoyl-L-carnitine). Their overall yields could reach 59.14%, 90.79% and 98.03%, respectively. The yields of isovaleryl-L-carnitine, octanoyl-L-carnitine and palmitoyl-L-carnitine in [Bmim]PF6 were 16.21%, 73.67% and 44.22 % more than those in acetonitrile, respectively. [Bmim]PF6 as the medium was better than acetonitrile. It could not only enhance the yields of acyl-L-carnitines, but also protect the lipase activity.

Nitroxides as reaction intermediates

1982 ◽  
Vol 60 (12) ◽  
pp. 1414-1420 ◽  
Author(s):  
Hans Gunter Aurich
Keyword(s):  
Electron Spin Resonance ◽  
Electron Spin ◽  
Isopropyl Alcohol ◽  
High Reactivity ◽  
Reaction Intermediates ◽  
Reaction Products ◽  
Nitronyl Nitroxide ◽  
Reaction Conditions ◽  
Spin Resonance ◽  
Secondary Reactions

Vinyl nitroxides 4 are obtained by oxidation of the nitrones 3, as was shown by esr studies and by identification of the reaction products. The formation of 4d–f is even observed in oxidation of the hydroxylamines 1d–f, nitroxides 2d–f and nitrones 3d–f being the intermediates. The high reactivity of the vinyl nitroxides 4 at their β-position is illustrated by the reactions of 4a with various compounds affording the nitroxides 7–10, respectively. Compound 4c reacts with its precursor 3c to give 11, 12, or 13, depending on the reaction conditions. From oxidation of 3a, c, and e the dimerization products 5a, c, and e, respectively, could be isolated. Whereas further oxidation of 5d yields 6d, the acyl nitroxides 14a and c are formed in the oxidation of 5a and c, respectively.The formation of quinone 23 in the reaction of 2-methyl-2-nitrosopropane with potassium tert-butoxide in isopropyl alcohol in the presence of oxygen is discussed. The nitroxide 20 has been detected in the reaction mixture. Imines 24 react with nitrosobenzene giving nitroxides 26. These are further oxidized by nitrosobenzene to afford nitrones 27. Whereas 27a and b could be isolated, 27c and d undergo further reaction yielding the diimines 30c and d along with dinitrone 29.The formation and reactions of imino nitroxides 31 and of the nitronyl nitroxide 41 are discussed. Electron spin resonance studies revealed the high reactivity of the imidazolyl-1,3-dioxides 46 and the imidazolyl-1-oxides 50, which easily form radicals 47–49 and 51, respectively, which are derived from secondary reactions.

scholarly journals USE OF CERAMIC MATERIAL (CEMENT CLINKER) FOR THE PRODUCTION OF BIODIESEL

2013 ◽  
Vol 22 ◽  
pp. 71-78
Author(s):  
SUNNY SONI ◽  
MADHU AGARWAL
Keyword(s):  
Soybean Oil ◽  
Edible Oils ◽  
Methyl Esters ◽  
Catalytic Performance ◽  
Cement Clinker ◽  
Molar Ratio ◽  
Reaction Conditions ◽  
Rural Economic Development ◽  
Additional Demand ◽  
Biodiesel Fuels

Biodiesel is a renewable liquid fuel made from natural, renewable biological sources such as edible and non edible oils. Over the last years, biodiesel has gained more market due to its benefits and because it appears as the natural substitute for diesel. Reasons for growing interest in biodiesel include its potential for reducing noxious emissions, potential contributions to rural economic development, as an additional demand center for agricultural commodities, and as a way to reduce reliance on foreign oil. Biodiesel was prepared from soybean oil by transesterification with methanol in the presence of cement clinker. Cement clinker was examined as a catalyst for a conversion of soybean oil to fatty acid methyl esters (FAMEs). It can be a promising heterogeneous catalyst for the production of biodiesel fuels from soybean oil because of high activity in the conversion and no leaching in the transesterification reaction. The reaction conditions were optimized. A study for optimizing the reaction parameters such as the reaction temperature, and reaction time, was carried out. The catalyst cement clinker composition was characterized by XRF. The results demonstrate that the cement clinker shows high catalytic performance & it was found that the yield of biodiesel can reach as high as 84.52% after 1 h reaction at 65°C, with a 6:1 molar ratio of methanol to oil, 21 wt% KOH/cement clinker as catalyst.

Synergistic effect of co-reactant promotes one-step oxidation of cyclohexane into adipic acid catalyzed by manganese porphyrins

2015 ◽  
Vol 93 (7) ◽  
pp. 696-701 ◽  
Author(s):  
Hui Li ◽  
Yuanbin She ◽  
Haiyan Fu ◽  
Meijuan Cao ◽  
Jing Wang ◽  
...  
Keyword(s):  
Synergistic Effect ◽  
Co Oxidation ◽  
Adipic Acid ◽  
Molar Ratio ◽  
Reaction Conditions ◽  
Catalyst Structure ◽  
Manganese Porphyrins ◽  
Co Oxidation Reaction ◽  
One Step ◽  
Acid Catalyzed

The synergistic effect of cyclohexane and cyclohexanone promoted synthesis of adipic acid catalyzed by [MnIIIT(p-Cl)PP]Cl with cyclohexane and cyclohexanone as co-reactants. The results showed that the conversions of cyclohexane and cyclohexanone were significantly enhanced because of the cyclohexanone synergistic effect, and the higher selectivity to adipic acid was obtained with dioxygen as an oxidant. The studies indicated that the co-oxidation of cyclohexane and cyclohexanone was influenced by the initial molar ratio of cyclohexanone and cyclohexane, catalyst structure, catalyst concentrations, and reaction conditions. The preliminary mechanism of the co-oxidation reaction of cyclohexane and cyclohexanone using [MnIIIT(p-Cl)PP]Cl as the catalyst was proposed.

Reuse of Fried Oil to Obtain Biodiesel: Zeolites Y as a Catalyst

2007 ◽  
Vol 5 (1) ◽  
Author(s):  
A. Brito ◽  
M. E. Borges ◽  
R. Arvelo ◽  
F. Garcia ◽  
M. C. Diaz ◽  
...  
Keyword(s):  
Fixed Bed ◽  
Weight Ratio ◽  
Degree Of Conversion ◽  
Transesterification Reaction ◽  
Molar Ratio ◽  
Catalytic Reactor ◽  
Reaction Products ◽  
Waste Oil ◽  
Catalytic Effects ◽  
Fried Oil

The transesterification reaction is the most utilized process to obtain biodiesel. Fried oil transesterification reactions with methanol have been studied using several zeolites Y and interchanged with CsCl and KOH. The reaction has been carried out both in a slurry reactor and a fixed bed catalytic reactor. The catalytic effects of zeolites have been tested within a temperature range of 60-476°C, 2.5-5% catalyst/waste oil weight ratio, and 6:1 - 100:1 methanol/oil molar ratio. Cosolvents (THF, n-hexane) in the reaction feedstock effect have also been studied as well as catalyst regeneration effects. Viscosity of both the oil and the transesterification reaction products was determined as an initial guide to investigate the degree of conversion to biodiesel as well as FAME content by GC. When interchanged zeolites are used conversions are improved, getting the best yields (98% FAME) for the Y756 zeolite interchanged with KOH. Viscosities of the reaction product obtained reached values next to diesel standard ones.

scholarly journals Biodiesel Production from a Novel Nonedible Feedstock, Soursop (Annona muricata L.) Seed Oil

Energies ◽  
2018 ◽  
Vol 11 (10) ◽  
pp. 2562 ◽  
Author(s):  
Chia-Hung Su ◽  
Hoang Nguyen ◽  
Uyen Pham ◽  
My Nguyen ◽  
Horng-Yi Juan
Keyword(s):  
Reaction Time ◽  
Seed Oil ◽  
Biodiesel Production ◽  
Molar Ratio ◽  
Annona Muricata ◽  
Reaction Conditions ◽  
Biodiesel Feedstock ◽  
Acid Catalyzed ◽  
American Society ◽  
Optimal Reaction

This study investigated the optimal reaction conditions for biodiesel production from soursop (Annona muricata) seeds. A high oil yield of 29.6% (w/w) could be obtained from soursop seeds. Oil extracted from soursop seeds was then converted into biodiesel through two-step transesterification process. A highest biodiesel yield of 97.02% was achieved under optimal acid-catalyzed esterification conditions (temperature: 65 °C, 1% H2SO4, reaction time: 90 min, and a methanol:oil molar ratio: 10:1) and optimal alkali-catalyzed transesterification conditions (temperature: 65 °C, reaction time: 30 min, 0.6% NaOH, and a methanol:oil molar ratio: 8:1). The properties of soursop biodiesel were determined and most were found to meet the European standard EN 14214 and American Society for Testing and Materials standard D6751. This study suggests that soursop seed oil is a promising biodiesel feedstock and that soursop biodiesel is a viable alternative to petrodiesel.

Sign in / Sign up

Export Citation Format

Share Document