Atomic Scale Aluminum and Strain Distribution in a Gan/AlxGa1−XN Heterostructure

1997 ◽  
Vol 482 ◽  
Author(s):  
Christian Kisielowski ◽  
Olaf Schmidt ◽  
Jinwei Yang

AbstractA GaN/AlxGalxN multi-quantum well test structure with Al concentrations 0 ≤ xAl ≤ 1 was utilized to investigate the growth of AlxGal–xN barrier layers deposited by metal organic chemical vapor deposition (MOCVD). A transition from a two dimensional (2D) to a three dimensional (3D) growth mode was observed in AlxGa1–xN barriers with XAl ≥ 0.75. It is argued that the transition occurs because of growth at temperatures that are low compared with the materials melting points Tmelt. The resulting rough AlxGa1–xN surfaces can be planarized by overgrowth with GaN. Quantitative high resolution electron microscopy (HREM) was applied to measure composition and strain profiles across the GaN/AlxGa1−xN stacks at an atomic level. The measurements reveal a substantial variation of lattice constants at the AlxGa1−xN/GaN interfaces that is attributed to an Al accumulation.

1997 ◽  
Vol 482 ◽  
Author(s):  
H. Hirayama ◽  
S. Tanaka ◽  
P. Ramvall ◽  
Y. Aoyagi

AbstractWe demonstrate photoluminescence from self- assembling InGaN quantum dots (QDs), which are artificially fabricated on AlGaN surfaces via metal- organic chemical vapor deposition. InGaN QDs are successfully fabricated by the growth mode transition from step- flow to three dimensional island formation by using anti-surfactant silicon on AlGaN surface. The diameter and height of the fabricated InGaN QDs are estimated to be ˜10nm and ˜5nm, respectively, by an atomic- force- microscope (AFM). Indium mole fraction of InxGal−x N QDs is controlled from x=˜0.22 to ˜0.52 by varying the growth temperature of QDs. Intense photoluminescence is observed even at room temperature from InGaN QDs embedded with the GaN capping layers. In addition, the temperature- dependent energy shift of the photoluminescence peak- energy shows a localization behavior.


2009 ◽  
Vol 81 (8) ◽  
pp. 1523-1534 ◽  
Author(s):  
François Weiss ◽  
Marc Audier ◽  
Ausrine Bartasyte ◽  
Daniel Bellet ◽  
Cécile Girardot ◽  
...  

The development of thin films, in the context of ongoing reduction in the size of electronic systems, poses challenging questions for the materials sciences of multifunctional nanostructures. These include the limits of size reduction, integration of heterogeneous functions, and system characterization or process control at an atomic scale. We present here different studies devoted to perovskite oxide materials (or materials with derived structure), where in specific directions of the crystal structure the atomic organization decreases down to a few nanometers, thus building nanostructures. In these materials, very original physical phenomena are observed in multilayers or superlattices, nanowires (NWs) or nanodots, mainly because strain, surfaces, and interfaces play here a predominant role and can tune the physical properties. Metal-organic chemical vapor deposition (MOCVD) routes have been used for the synthesis of oxide materials. We first introduce the basic rules governing the choice of metal-organic precursors for the MOCVD reaction. Next we discuss the principles of the pulsed injection MOCVD system. A laser-assisted MOCVD system, designed to the direct growth of 2D and 3D photonic structures, will also be described. Selected case studies will finally be presented, illustrating the powerful development of different oxide nanostructures based on dielectric, ferroelectric, or superconducting oxides, manganites, and nickelates, as well as first results related to the growth of ZnO NWs.


RSC Advances ◽  
2016 ◽  
Vol 6 (88) ◽  
pp. 84794-84800 ◽  
Author(s):  
Yunhao Lin ◽  
Meijuan Yang ◽  
Wenliang Wang ◽  
Zhiting Lin ◽  
Guoqiang Li

High-quality crack-free GaN epitaxial films were successfully grown on Si(111) substrates using metal–organic chemical vapor deposition by in situ depositing SiN on a 3-dimensional (3D) GaN template.


2018 ◽  
Vol 6 (7) ◽  
pp. 1642-1650 ◽  
Author(s):  
Wenliang Wang ◽  
Yunhao Lin ◽  
Yuan Li ◽  
Xiaochan Li ◽  
Liegen Huang ◽  
...  

High-quality GaN-based light-emitting diode (LED) wafers have been grown on Si substrates by metal–organic chemical vapor deposition by designing epitaxial structures with AlN/Al0.24Ga0.76N buffer layers and a three-dimensional (3D) GaN layer.


2021 ◽  
Vol 15 (6) ◽  
pp. 2170024
Author(s):  
Yuxuan Zhang ◽  
Zhaoying Chen ◽  
Kaitian Zhang ◽  
Zixuan Feng ◽  
Hongping Zhao

ACS Nano ◽  
2020 ◽  
Author(s):  
Assael Cohen ◽  
Avinash Patsha ◽  
Pranab K. Mohapatra ◽  
Miri Kazes ◽  
Kamalakannan Ranganathan ◽  
...  

1997 ◽  
Vol 482 ◽  
Author(s):  
Z-Q. Fang ◽  
J. W. Hemsky ◽  
D. C. Look ◽  
M. P. Mack ◽  
R. J. Molnar ◽  
...  

AbstractA 1-MeV-electron-irradiation (EI) induced trap at Ec-0.18 eV is found in n-type GaN by deep level transient spectroscopy (DLTS) measurements on Schottky barrier diodes, fabricated on both metal-organic-chemical-vapor-deposition and hydride-vapor-phase-epitaxy material grown on sapphire. The 300-K carrier concentrations of the two materials are 2.3 × 1016 cm−3 and 1.3 × 1017 cm−3, respectively. Up to an irradiation dose of 1 × 1015 cm−2, the electron concentrations and pre-existing traps in the GaN layers are not significantly affected, while the EI-induced trap is produced at a rate of at least 0.2 cm−1. The DLTS peaks in the two materials are shifted slightly, possibly due to electric-field effects. Comparison with theory suggests that the defect is most likely associated with the N vacancy or Ga interstitial.


Sign in / Sign up

Export Citation Format

Share Document