Epitaxial Growth and Structure of Thin Single Crystal γ-Al2O3 Films on Si (111) Using e-Beam Evaporation of Sapphire in Ultra-High Vacuum

2004 ◽  
Vol 811 ◽  
Author(s):  
M. Hong ◽  
A. R. Kortan ◽  
J. Kwo ◽  
J. P. Mannaerts ◽  
S. Y. Wu
Keyword(s):  
Single Crystal ◽  
Epitaxial Growth ◽  
Substrate Surface ◽  
High Vacuum ◽  
High Energy ◽  
Electron Beam Evaporation ◽  
Ultra High Vacuum ◽  
Plane Component ◽  
High Structural Perfection ◽  
Single Crystal Sapphire

ABSTRACTWe have characterized the structure of epitaxial Al2O3 films deposited on Si (111) substrate using electron beam evaporation from a high-purity single crystal sapphire source in a molecular beam epitaxy (MBE) approach. The structural studies were carried out mainly by single crystal x-ray diffraction with the initial epitaxial growth observed by in-situ reflection high energy electron diffraction. The Al2O3 films grow in the cubic γ-phase with a very uniform thickness, and a high structural perfection. The <111> axes of the film and the Si substrate are well aligned. A mosaic scan of the Al2O3 (222) peak (with no in-plane component) finds a 0.3 degree (or 18') spread. All three unit cell vectors of the film and the substrate are parallel, but the in-plane cone scans of the {004} and {044} diffraction peaks about the surface normal find a ±3 degree film in-plane rotation with respect to the substrate surface orientation.

Surface Control of ZrB2 (0001) Substrate for Molecular-Beam Epitaxy of GaN

2003 ◽  
Vol 798 ◽  
Author(s):  
Jun Suda ◽  
Hiroyasu Yamashita ◽  
Robert Armitage ◽  
Tsunenobu Kimoto ◽  
Hiroyuki Matsunami
Keyword(s):  
Molecular Beam Epitaxy ◽  
Molecular Beam ◽  
Substrate Surface ◽  
High Vacuum ◽  
Surface Preparation ◽  
High Energy ◽  
Ultra High Vacuum ◽  
High Quality ◽  
Preparation Methods ◽  
Thermal Cleaning

ABSTRACTZirconium diboride (ZrB2) is a promising lattice-matched substrate for GaN-based materials. A key issue to realize high-quality heteroepitaxial growth is preparation of the substrate surface. The ZrB2 surface was studied by x-ray photoemission spectroscopy (XPS) and reflection high-energy electron diffraction (RHEED). XPS results indicated the presence of both ZrO2 and ZrB2 on the as-received substrate surface. Thermal cleaning at 1000°C in ultra-high vacuum, Ar+ ion sputtering, and wet chemical treatments were examined as surface preparation methods. After treatment with HF acid, the O peak intensity was much reduced. The combination of HF treatment and thermal cleaning resulted in sharp and intense RHEED from the ZrB2 surface. GaN grown on the surface by molecular-beam epitaxy exhibited intense photoluminescence, suggesting that this treatment is effective to obtain high-quality GaN on ZrB2 substrates.

Low Temperature Silicon Epitaxy Grown by Electron-Beam Evaporation in an Ultra-High Vacuum System

1991 ◽  
Vol 237 ◽  
Author(s):  
Yung-Jen Lin ◽  
Tri-Rung Yew
Keyword(s):  
Electron Beam ◽  
Thermal Desorption ◽  
High Vacuum ◽  
High Energy ◽  
Electron Beam Evaporation ◽  
Ultra High Vacuum ◽  
Native Oxide ◽  
Vacuum System ◽  
Wafer Surface ◽  
Epitaxial Silicon

ABSTRACTThis paper presents the results of silicon epitaxial growth on silicon windows surrounded with oxide walls by electron-beam evaporation in an ultra-high vacuum system with a load-lock chamber. The wafer surface was in-situ cleaned in the growth chamber to remove native oxide by thermal desorption at about 840 °C and a base pressure of better than 2 × 10-9 Torr. The growth temperature was 200°C or higher. The pre-epitaxial silicon surface structure was inspected by reflection high energy electron diffraction (RHEED). The influence of the thermal desorption on the quality of the epi/substrate interface and epitaxial layers was studied. In addtion, the deposition parameters which control the epitaxial quality were investigated. The epitaxial films were characterized by cross-sectional trasmission electron microscopy (XTEM) and secondary ion mass spectroscopy (SIMS).

Structure of Palladium Single-Crystal Films Prepared by Flash Evaporation onto (001) NaCl Substrates

1970 ◽  
Vol 28 ◽  
pp. 456-457
Author(s):  
L. E. Murr ◽  
G. Wong
Keyword(s):  
Single Crystal ◽  
High Vacuum ◽  
Ultra High Vacuum ◽  
High Rate ◽  
Flash Evaporation ◽  
Optimum Load ◽  
Single Crystal Films ◽  
Crystal Films ◽  
A Current

Palladium single-crystal films have been prepared by Matthews in ultra-high vacuum by evaporation onto (001) NaCl substrates cleaved in-situ, and maintained at ∼ 350° C. Murr has also produced large-grained and single-crystal Pd films by high-rate evaporation onto (001) NaCl air-cleaved substrates at 350°C. In the present work, very large (∼ 3cm2), continuous single-crystal films of Pd have been prepared by flash evaporation onto air-cleaved (001) NaCl substrates at temperatures at or below 250°C. Evaporation rates estimated to be ≧ 2000 Å/sec, were obtained by effectively short-circuiting 1 mil tungsten evaporation boats in a self-regulating system which maintained an optimum load current of approximately 90 amperes; corresponding to a current density through the boat of ∼ 4 × 104 amperes/cm2.

Hetero-Epitaxy of Group Va Metals on Sapphire

1972 ◽  
Vol 30 ◽  
pp. 492-493
Author(s):  
J. E. O'Neal ◽  
J. J. Bellina ◽  
B. B. Rath
Keyword(s):  
Thermal Contact ◽  
High Vacuum ◽  
Electron Beam Evaporation ◽  
Ultra High Vacuum ◽  
Backing Plate ◽  
Sapphire Substrates ◽  
Deposition Parameters ◽  
Polishing Damage ◽  
Reflection Electron Diffraction

Thin films of the bcc metals vanadium, niobium and tantalum were epitaxially grown on (0001) and sapphire substrates. Prior to deposition, the mechanical polishing damage on the substrates was removed by an in-situ etch. The metal films were deposited by electron-beam evaporation in ultra-high vacuum. The substrates were heated by thermal contact with an electron-bombarded backing plate. The deposition parameters are summarized in Table 1.The films were replicated and examined by electron microscopy and their crystallographic orientation and texture were determined by reflection electron diffraction. Verneuil-grown and Czochralskigrown sapphire substrates of both orientations were employed for each evaporation. The orientation of the metal deposit was not affected by either increasing the density of sub-grain boundaries by about a factor of ten or decreasing the deposition rate by a factor of two. The results on growth epitaxy are summarized in Tables 2 and 3.

Transmission Electron Microscopy of Epitaxial silicides grown by ultra high vacuum deposition

1989 ◽  
Vol 47 ◽  
pp. 462-463
Author(s):  
D. Loretto ◽  
J. M. Gibson ◽  
S. M. Yalisove
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Electron Diffraction ◽  
High Vacuum ◽  
High Energy ◽  
Energy Electron ◽  
Ultra High Vacuum ◽  
Ex Situ ◽  
Transmission Electron

The silicides CoSi2 and NiSi2 are both metallic with the fee flourite structure and lattice constants which are close to silicon (1.2% and 0.6% smaller at room temperature respectively) Consequently epitaxial cobalt and nickel disilicide can be grown on silicon. If these layers are formed by ultra high vacuum (UHV) deposition (also known as molecular beam epitaxy or MBE) their thickness can be controlled to within a few monolayers. Such ultrathin metal/silicon systems have many potential applications: for example electronic devices based on ballistic transport. They also provide a model system to study the properties of heterointerfaces. In this work we will discuss results obtained using in situ and ex situ transmission electron microscopy (TEM).In situ TEM is suited to the study of MBE growth for several reasons. It offers high spatial resolution and the ability to penetrate many monolayers of material. This is in contrast to the techniques which are usually employed for in situ measurements in MBE, for example low energy electron diffraction (LEED) and reflection high energy electron diffraction (RHEED), which are both sensitive to only a few monolayers at the surface.

Modifications of a JEOL 2000EX TEM for insSitu surface studies

1993 ◽  
Vol 51 ◽  
pp. 640-641
Author(s):  
Michael T. Marshall ◽  
Xianghong Tong ◽  
J. Murray Gibson
Keyword(s):  
Electron Diffraction ◽  
Surface Science ◽  
Film Growth ◽  
High Vacuum ◽  
High Energy ◽  
Energy Electron ◽  
Ultra High Vacuum ◽  
Transmission Electron ◽  
Fundamental Insight

We have modified a JEOL 2000EX Transmission Electron Microscope (TEM) to allow in-situ ultra-high vacuum (UHV) surface science experiments as well as transmission electron diffraction and imaging. Our goal is to support research in the areas of in-situ film growth, oxidation, and etching on semiconducter surfaces and, hence, gain fundamental insight of the structural components involved with these processes. The large volume chamber needed for such experiments limits the resolution to about 30 Å, primarily due to electron optics. Figure 1 shows the standard JEOL 2000EX TEM. The UHV chamber in figure 2 replaces the specimen area of the TEM, as shown in figure 3. The chamber is outfitted with Low Energy Electron Diffraction (LEED), Auger Electron Spectroscopy (AES), Residual Gas Analyzer (RGA), gas dosing, and evaporation sources. Reflection Electron Microscopy (REM) is also possible. This instrument is referred to as SHEBA (Surface High-energy Electron Beam Apparatus).The UHV chamber measures 800 mm in diameter and 400 mm in height. JEOL provided adapter flanges for the column.

scholarly journals The Growth of Semiconductor Thin Films Studied by RHEED

1990 ◽  
Vol 43 (5) ◽  
pp. 583
Author(s):  
GL Price
Keyword(s):  
Thin Films ◽  
Surface Science ◽  
High Vacuum ◽  
High Energy ◽  
Ultra High Vacuum ◽  
Large Area ◽  
Growth Modes ◽  
Semiconductor Thin Films ◽  
Wide Range ◽  
Recent Developments

Recent developments in the growth of semiconductor thin films are reviewed. The emphasis is on growth by molecular beam epitaxy (MBE). Results obtained by reflection high energy electron diffraction (RHEED) are employed to describe the different kinds of growth processes and the types of materials which can be constructed. MBE is routinely capable of heterostructure growth to atomic precision with a wide range of materials including III-V, IV, II-VI semiconductors, metals, ceramics such as high Tc materials and organics. As the growth proceeds in ultra high vacuum, MBE can take advantage of surface science techniques such as Auger, RHEED and SIMS. RHEED is the essential in-situ probe since the final crystal quality is strongly dependent on the surface reconstruction during growth. RHEED can also be used to calibrate the growth rate, monitor growth kinetics, and distinguish between various growth modes. A major new area is lattice mismatched growth where attempts are being made to construct heterostructures between materials of different lattice constants such as GaAs on Si. Also described are the new techniques of migration enhanced epitaxy and tilted superlattice growth. Finally some comments are given On the means of preparing large area, thin samples for analysis by other techniques from MBE grown films using capping, etching and liftoff.

AlN thin films fabricated by ultra-high vacuum electron-beam evaporation with ammonia for silicon-on-insulator application

2005 ◽  
Vol 239 (3-4) ◽  
pp. 327-334 ◽  
Author(s):  
Ming Zhu ◽  
Peng Chen ◽  
Ricky K.Y. Fu ◽  
Weili Liu ◽  
Chenglu Lin ◽  
...  
Keyword(s):  
Thin Films ◽  
Electron Beam ◽  
High Vacuum ◽  
Electron Beam Evaporation ◽  
Silicon On Insulator ◽  
Ultra High Vacuum

Observation of GaAs/Si Epitaxial Interfaces by Atomic Resolution Electron Microscopy

1986 ◽  
Vol 67 ◽  
Author(s):  
N. Otsuka ◽  
C. Choi ◽  
Y. Nakamura ◽  
S. Nagakura ◽  
R. Fischer ◽  
...  
Keyword(s):  
Substrate Surface ◽  
High Vacuum ◽  
Ultra High Vacuum ◽  
Threading Dislocations ◽  
Misfit Dislocations ◽  
Si Substrates ◽  
Voltage Electron ◽  
Resolution Electron ◽  
Gaas Films ◽  
Substrate Surfaces

ABSTRACTRecent studies have shown that high quality GaAs films can be grown by MBE on Si substrates whose surfaces are slightly tilted from the (100) plane. In order to investigate the effect of the tilting of substrate surfaces on the formation of threading dislocations, the GaAs/Si epitaxial interfaces have been observed with a 1 MB ultra-high vacuum, high voltage electron microscope. Two types of misfit dislocations, one with Burgers vectors parallel to the interface and the other with Burgers vectors inclined from the interface, were found in these epitaxial interfaces. The observation of crosssectional samples perpendicular to each other has shown that the tilting of the substrate surface directly influences the generation of these two types of misfit dislocations. The mechanism of the reduction of threading dislocations by the tilting of the substrate surface is discussed based on these observations.

scholarly journals Symmetry-Induced Structuring of Ultrathin FeO and Fe3O4 Films on Pt(111) and Ru(0001)

Nanomaterials ◽  
2018 ◽  
Vol 8 (9) ◽  
pp. 719
Author(s):  
Natalia Michalak ◽  
Zygmunt Miłosz ◽  
Gina Peschel ◽  
Mauricio Prieto ◽  
Feng Xiong ◽  
...  
Keyword(s):  
Iron Oxide ◽  
Single Crystal ◽  
High Vacuum ◽  
Oxide Films ◽  
Ultra High Vacuum ◽  
Mutual Orientation ◽  
High Catalytic Activity ◽  
Plane Orientation ◽  
Metal Single Crystal ◽  
Iron Oxide Films

Iron oxide films epitaxially grown on close-packed metal single crystal substrates exhibit nearly-perfect structural order, high catalytic activity (FeO) and room-temperature magnetism (Fe3O4). However, the morphology of the films, especially in the ultrathin regime, can be significantly influenced by the crystalline structure of the used support. This work reports an ultra-high vacuum (UHV) low energy electron/synchrotron light-based X-ray photoemission electron microscopy (LEEM/XPEEM) and electron diffraction (µLEED) study of the growth of FeO and Fe3O4 on two closed-packed metal single crystal surfaces: Pt(111) and Ru(0001). The results reveal the influence of the mutual orientation of adjacent substrate terraces on the morphology of iron oxide films epitaxially grown on top of them. On fcc Pt(111), which has the same mutual orientation of adjacent monoatomic terraces, FeO(111) grows with the same in-plane orientation on all substrate terraces. For Fe3O4(111), one or two orientations are observed depending on the growth conditions. On hcp Ru(0001), the adjacent terraces of which are ‘rotated’ by 180° with respect to each other, the in-plane orientation of initial FeO(111) and Fe3O4(111) crystallites is determined by the orientation of the substrate terrace on which they nucleated. The adaptation of three-fold symmetric iron oxides to three-fold symmetric substrate terraces leads to natural structuring of iron oxide films, i.e., the formation of patch-like magnetite layers on Pt(111) and stripe-like FeO and Fe3O4 structures on Ru(0001).

Sign in / Sign up

Export Citation Format

Share Document