scholarly journals DETERMINATION OF EMISSIONS OF HARMFUL SUBSTANCES BY MOTOR TRANSPORT

2015 ◽  
Vol 32 (12) ◽  
pp. 58-61
Author(s):  
Nikolay Vasilevich Penshin ◽  
◽  
Victor, Yurievich Ivlev ◽  
Keyword(s):  
Motor Transport ◽  
Harmful Substances ◽  
Emissions Of Harmful Substances

Determination of mechanical losses in internal combustion engines

2020 ◽  
pp. 37-38
Author(s):  
I.K. Aleksandrov ◽  
V.A. Rakov ◽  
N.E. Dyimov
Keyword(s):  
Internal Combustion Engines ◽  
Combustion Engine ◽  
High Reliability ◽  
Internal Combustion ◽  
Compressed Air ◽  
Combustion Engines ◽  
Harmful Substances ◽  
Fuel Consumption And Emissions ◽  
Emissions Of Harmful Substances

A method for determining of mechanical losses in an internal combustion engine is proposed, the principal difference of which is the rotation of the engine shaft with compressed air. This method provides high reliability results on reduction of fuel consumption and emissions of harmful substances. Keywords ICE, mechanical losses, tests, compressed air [email protected]

Control of fuel combustion in small and medium power boilers

2020 ◽  
Author(s):  
A.O. Zaporozhets ◽  
◽  
V.P. Babak
Keyword(s):  
Combustion Process ◽  
Control Process ◽  
Fuel Combustion ◽  
Educational Institutions ◽  
Indirect Determination ◽  
Effi Ciency ◽  
Harmful Substances ◽  
Fuel Mixtures ◽  
Emissions Of Harmful Substances

The monograph deals with the problems of increasing the effi ciency of fuel combustion and reducing emissions of harmful substances in boilers with a capacity of up to 3.5 MW. Approaches for the formation of stoichiometric air-fuel mixtures in boilers are developed. Th e method for indirect determination of the concentration of air components was developed, which allows to increase the metrological characteristics of gas-analyzing devices. Methods, algorithms and programs to automate the combustion control process, while ensuring the reliability of the data, are created. A system for monitoring the fuel combustion process was developed, and it was implemented on the basis of the NIISTU-5 boiler unit. For researchers, engineers, as well as lecturers and postgraduates of higher educational institutions and scientifi c institutions, working in the fi eld of engineering and optimization in the energy.

scholarly journals Hygienic Chemical Studies on Public Hazards by Harmful Substances. IV. : Atomic Absorption Photometric Determination of Lead in Gasoline

Eisei kagaku ◽  
1971 ◽  
Vol 17 (6) ◽  
pp. 393-397
Author(s):  
KATSUHIKO TANAKA ◽  
KATSUHISA FUKAYA ◽  
KIYOSHI YOSHITANI ◽  
SYOZO FUKUI ◽  
SABURO KANNO
Keyword(s):  
Atomic Absorption ◽  
Photometric Determination ◽  
Chemical Studies ◽  
Harmful Substances

scholarly journals Hygienic Chemical Studies on Public Hazards by Harmful Substances. II. : Some Examinations on the Spectrophotometric Determination of Cadmium by using of the Dithizone Method

Eisei kagaku ◽  
1971 ◽  
Vol 17 (1) ◽  
pp. 19-23
Author(s):  
SABURO KANNO ◽  
SYOZO FUKUI ◽  
MIKIHIRO KANEKO ◽  
SYOJI NAITO ◽  
SETSUKO SETSUDA ◽  
...  
Keyword(s):  
Spectrophotometric Determination ◽  
Chemical Studies ◽  
Harmful Substances

scholarly journals Ensuring Requirements for Emissions of Harmful Substances of Diesel Engines

2020 ◽  
Vol 19 (4) ◽  
pp. 305-310
Author(s):  
G. M. Kuharonak ◽  
D. V. Kapskiy ◽  
V. I. Berezun
Keyword(s):  
Diesel Engine ◽  
Nitrogen Oxides ◽  
Fuel Consumption ◽  
Exhaust Gas Recirculation ◽  
Exhaust Gas ◽  
Average Temperature ◽  
Dispersed Particles ◽  
Harmful Substances ◽  
Gas Recirculation ◽  
Emissions Of Harmful Substances

The purpose of this work is to consider the requirements for emissions of harmful substances of diesel engines by selecting design and adjustment parameters that determine the organization of the workflow, and the exhaust gas cleaning system, taking into account the reduction of fuel consumption. Design elements and geometric characteristics of structures for a turbocharged diesel engine of Д-245 series produced by JSC HMC Minsk Motor Plant (4ЧН11/12.5) with a capacity of 90 kW equipped with an electronically controlled battery fuel injection have been developed: exhaust gas recirculation along the high pressure circuit, shape and dimensions of the combustion chamber, the number and angular arrangement of the nozzle openings in a nozzle atomizer, and inlet channels of the cylinder head. Methods for organizing a workflow are proposed that take into account the shape of the indicator diagrams and affect the emissions of nitrogen oxides and dispersed particles differently. Their implementation allows us to determine the boundary ranges of changes in the control parameters of the fuel supply and exhaust gas recirculation systems when determining the area of minimizing the specific effective fuel consumption and the range of studies for the environmental performance of a diesel engine. The paper presents results of the study on the ways to meet  the requirements for emissions of harmful substances, obtained by considering options for the organization of working processes, taking into account the reduction in specific effective fuel consumption, changes in the average temperature of the exhaust gases and diesel equipment. To evaluate these methods, the following indicators have been identified: changes in specific fuel consumption and average temperature of the toxicity cycle relative to the base cycle, the necessary degree of conversion of the purification system for dispersed particles and NOx. Recommendations are given on choosing a diesel engine to meet Stage 4 emission standards for nitrogen oxides and dispersed particles.

scholarly journals ЗМЕНШЕННЯ ВИКИДІВ СУДНОВОГО ДИЗЕЛЯ УТИЛІЗАЦІЄЮ ТЕПЛОТИ РЕЦИРКУЛЯЦІЙНИХ ГАЗІВ ЕЖЕКТОРНОЮ ХОЛОДИЛЬНОЮ МАШИНОЮ

2019 ◽  
pp. 20-24
Author(s):  
Максим Андрійович Пирисунько ◽  
Роман Миколайович Радченко ◽  
Андрій Адольфович Андреєв ◽  
Вікторія Сергіївна Корнієнко
Keyword(s):  
Nitrogen Oxides ◽  
Alternative Fuels ◽  
Exhaust Gas ◽  
Exhaust Gases ◽  
Harmful Emissions ◽  
Harmful Substances ◽  
Main Engine ◽  
Gas Recirculation ◽  
Refrigeration Machine ◽  
Emissions Of Harmful Substances

The problem of air basin pollution of the World Ocean with harmful emissions from the exhaust gases of marine diesel engines is primarily associated with the creation of highly efficient technologies for the neutralization of nitrogen oxides NOx on exhaust gases from a diesel engine. Emissions of harmful substances from the combustion of marine fuels are limited by international atmospheric protection programs and the requirements of the International Maritime Organization (IMO). The requirements relate to almost all groups of harmful emissions in marine engines and the more stringent of them are primarily related to nitrogen oxides NOx and sulfur oxides SOx. To reduce harmful emissions from exhaust gases into the environment, scientists and world engine leaders use and suggest various methods for reducing the content of harmful substances in exhaust gases. The implementation of new standards in the areas of further improvement of the working process, the use of alternative fuels, fuel, and air additives, as well as selective catalytic reduction systems do not preclude further development of scientific research in the field of exhaust gas cleaning. One of the promising ways in environmentalizing marine internal combustion engines is the neutralization of harmful substances in exhaust gases through particular gas recirculation (EGR-technology). However, the use of such techniques conflicts with the engine's energy efficiency. In the work presented, the scheme-design solution of the exhaust gas recirculation system with using the heat of recirculation gases by an ejector refrigeration machine for cooling the air at the intake of ship's main engine is proposed. The effect of using the heat of recirculation gases for cooling the air at the intake of the engine is analyzed taking into account the changing climatic conditions for a particular vessel's route line. It is shown that the use of an ejector refrigeration machine reduces the air temperature at the entrance of the main engine by 5…15 ° С, which reduces the specific fuel consumption. This reduces emissions of harmful substances when the engine is running with recirculation of gases.

Improving the Environmental Safety of Locomotive-type Diesel Engines Through the Use of Hydrogen

2020 ◽  
Vol 24 (5) ◽  
pp. 51-57
Author(s):  
D.Ya. Nosyrev ◽  
V.V. Asabin ◽  
A.A. Mishkin ◽  
L.S. Kurmanova ◽  
S.A. Petukhov ◽  
...  
Keyword(s):  
Experimental Data ◽  
Diesel Engines ◽  
Environmental Safety ◽  
Rail Transport ◽  
Diesel Locomotive ◽  
Reliable Operation ◽  
Hydrogen Supply ◽  
Harmful Substances ◽  
Board System ◽  
Emissions Of Harmful Substances

The issue of improving the environmental safety of locomotive-type diesel engines by using hydrogen is considered. The analysis of pollutants that pose a special danger to the atmosphere. To ensure reliable operation of locomotive-type diesel engine with hydrogen supply, an on-board system has been developed. To solve environmental problems in rail transport, the article provides experimental data on the assessment of the effect of hydrogen additives on the levels of emissions of harmful substances on the example of a diesel shunting diesel locomotive ChME3.

Sign in / Sign up

Export Citation Format

Share Document