Color stability of ceramic brackets immersed in potentially staining solutions

OBJECTIVE: To assess the color stability of five types of ceramic brackets after immersion in potentially staining solutions.METHODS: Ninety brackets were divided into 5 groups (n = 18) according to brackets commercial brands and the solutions in which they were immersed (coffee, red wine, coke and artificial saliva). The brackets assessed were Transcend (3M/Unitek, Monrovia, CA, USA), Radiance (American Orthodontics, Sheboygan, WI, USA), Mystique (GAC International Inc., Bohemia, NY, USA) and Luxi II (Rocky Mountain Orthodontics, Denver, CO, USA). Chromatic changes were analyzed with the aid of a reflectance spectrophotometer and by visual inspection at five specific time intervals. Assessment periods were as received from the manufacturer (T0), 24 hours (T1), 72 hours (T2), as well as 7 days (T3) and 14 days (T4) of immersion in the aforementioned solutions. Results were submitted to statistical analysis with ANOVA and Bonferroni correction, as well as to a multivariate profile analysis for independent and paired samples with significance level set at 5%.RESULTS: The duration of the immersion period influenced color alteration of all tested brackets, even though these changes could not always be visually observed. Different behaviors were observed for each immersion solution; however, brackets immersed in one solution progressed similarly despite minor variations.CONCLUSIONS: Staining became more intense over time and all brackets underwent color alterations when immersed in the aforementioned solutions.

Download Full-text

Evaluation of liquid sorption and color stability of dental composites after exposure to common lactation teas

International Dental Research ◽

10.5577/intdentres.2021.vol11.suppl1.33 ◽

2021 ◽

Vol 11 (Suppl. 1) ◽

pp. 228-233

Author(s):

Zuhal Yıldırım Bilmez ◽

Oya Şeker ◽

Hazal Deniz Köse ◽

Başak Gözüyeşil Aslan

Keyword(s):

Composite Materials ◽

Artificial Saliva ◽

Color Stability ◽

Mean Value ◽

In Vivo Studies ◽

Dental Composites ◽

Primary Tooth ◽

Significance Level

Aim: To assess the effects of common lactation teas on liquid sorption and color stability of three different dental composites. Methodology: A total of 60 samples (n = 5) were examined from three composite materials: Omnichroma (Tokuyama Dental Co., Tokyo, Japan), Estelite Posterior, (Tokuyama Dental Co., Tokyo, Japan), and Mosaic Universal (Ultradent production Inc., South Jordan, UT, USA). Samples measuring 2x6 mm were taken and immersed in three different teas—Humana (Humana, Bremen, Germany), Hipp, (Hipp, Pfaffenhofen, Germany), and Lactamil (Nutricia, Friedrichsdorf, Germany) —as well as artificial saliva. The measurements were recorded at baseline and on the 7th day. A sensitive analytical balance was used to measure liquid sorption, and a VITA Easy Shade device was used for color measurements. Absorption and Delta E values were calculated. The data were analyzed using MANOVA at a significance level of (p<0.05). Results: Composite materials, solutions, and their interactions had a statistically significant effect on the sorption and Delta E values (p<0.001). The relative liquid absorption values among the composites were recorded as follows: Tokuyama>Mosaic>Omnichroma. Humana had the highest and Hipp had the lowest mean value among the solutions (p<0.001). For Delta E, Mosaic had the highest mean value among the composites, and Lactamil had the highest mean value among the solutions (p<0.001). Conclusion: Lactation teas cause discoloration in dental composites. In vitro and in vivo studies on color changes in dental composites are needed due to the sorption of these fluids. How to cite this article: Özüdoğru S, Tosun G. Survival and clinical evaluation of various space maintainers used for early primary tooth loss. Int Dent Res 2021;11(Suppl.1):222-7. https://doi.org/10.5577/intdentres.2021.vol11.suppl1.32 Linguistic Revision: The English in this manuscript has been checked by at least two professional editors, both native speakers of English.

Download Full-text

Effect of 0.05% Sodium Fluoride Mouthwash on Surface Roughness and Friction Between Ceramic Brackets and Rhodium-Coated and Uncoated Stainless Steel Wires

Frontiers in Dentistry ◽

10.18502/fid.v16i2.1363 ◽

2019 ◽

Author(s):

Tahereh HosseinzadehNik ◽

Hannaneh Ghadirian ◽

Tabassom Hooshmand ◽

Mohammad Javad Kharrazi fard ◽

Maryam Nasiri ◽

...

Keyword(s):

Surface Roughness ◽

Stainless Steel ◽

Sodium Fluoride ◽

Artificial Saliva ◽

Testing Machine ◽

Significance Level ◽

Force Microscopy ◽

Atomic Force ◽

Before And After ◽

Ceramic Brackets

Objectives: This study aimed to assess the effect of 0.05% sodium fluoride (NaF) mouthwash on the surface roughness and friction between ceramic brackets and rhodium-coated (RC) and uncoated stainless steel (SS) wires. Materials and Methods: This experimental study was performed on 48 maxillary premolar ceramic brackets. Twenty-four pieces of RC-SS wires were used. Samples were divided into four groups. Groups 1 and 2 were immersed in artificial saliva, and groups 3 and 4 were immersed in a solution consisting of artificial saliva (9%) and mouthwash (91%). To assess surface roughness, images were obtained from the surface of wires and brackets with atomic force microscopy (AFM) and scanning electron microscopy (SEM) before and after the intervention. To assess friction, the wires were ligated into brackets, and friction was measured at a crosshead speed of 0.5 mm/minute using a universal testing machine. Data were analyzed using one-way analysis of variance (ANOVA) at the 0.05 significance level. Results: Friction during sliding in RC wires was significantly less than that in SS wires (P<0.05). Increase in the friction in SS wires by mouthwash was significantly greater compared to RC wires (P<0.05). Surface roughness coefficients of the wires before the intervention were not significantly different. The surface roughness of the wires significantly increased after the intervention and it was greater in SS wires than in RC wires (P<0.05). Conclusion: Considering the lower friction and surface roughness of SS-RC wires compared to SS wires, SS-RC wires may be a better alternative for use with ceramic brackets.

Download Full-text

Effect of finishing and polishing on color stability of a nanofilled resin immersed in different media

Revista de Odontologia da UNESP ◽

10.1590/rou.2014.054 ◽

2014 ◽

Vol 43 (5) ◽

pp. 338-342

Author(s):

Ana Luísa Botta Martins de OLIVEIRA ◽

Camila Cruz LORENZETTI ◽

Patrícia Petromilli Nordi Sasso GARCIA ◽

Elisa Maria Aparecida GIRO

Keyword(s):

Stainless Steel ◽

Composite Resin ◽

Resin Composite ◽

Artificial Saliva ◽

Color Stability ◽

Steel Mold ◽

Significance Level ◽

Significant Difference ◽

Cielab System ◽

Polishing Procedures

OBJECTIVE: The purpose of this study was to evaluate the effect of finishing and polishing on color stability of a nanofilled composite resin (Filtek Z350 XT) according to different immersion media.MATERIAL AND METHOD: Composite disks (10 mm diameter, 2 mm thickness) were prepared for each group (n = 6) using a stainless steel mold. The groups were divided according to the presence or absence of finishing and polishing procedure and immersion media (artificial saliva, artificial juice- KAPO(r) Coca-Cola(r)flavors: pineapple, orange, strawberry and grape). The finishing and polishing procedures were performed using Super -Snap(r) disks. The specimens were stored in artificial saliva for 24 hours (baseline) and were analyzed using a color spectrophotometer by CIELab system. Then, they were immersed in different media for 5 minutes, 3 times a day, every 4 hours during 60 days. They were stored in artificial saliva at 37 ± 1°C during the immersion intervals. After this time, new measure of color was performed. The data were analyzed using Kruskall-Wallis test and Mann- Whitney test. The significance level was 5%.RESULT: The results showed that the finishing/polishing not significantly influence the color stability of resin composite (p > 0.05). There was no statistically significant difference in the color stability of the studied resin after immersion in different media (p > 0.05).CONCLUSION: The finishing and polishing procedures and the immersion media did not have influence on color stability of nanofilled resin Filtek Z350 XT.

Download Full-text

In vitro study of color stability of polycrystalline and monocrystalline ceramic brackets

Dental Press Journal of Orthodontics ◽

10.1590/2176-9451.19.4.114-121.oar ◽

2014 ◽

Vol 19 (4) ◽

pp. 114-121 ◽

Cited By ~ 5

Author(s):

Cibele Braga de Oliveira ◽

Luiz Guilherme Martins Maia ◽

Ary Santos-Pinto ◽

Luiz Gonzaga Gandini Júnior

Keyword(s):

Red Wine ◽

Color Change ◽

Artificial Saliva ◽

In Vitro Study ◽

Color Stability ◽

Black Tea ◽

Color Changes ◽

Ceramic Brackets ◽

Dye Solutions

OBJECTIVE: The aim of this in vitro study was to analyze color stability of monocrystalline and polycrystalline ceramic brackets after immersion in dye solutions. METHODS: Seven ceramic brackets of four commercial brands were tested: Two monocrystalline and two polycrystalline. The brackets were immersed in four dye solutions (coffee, red wine, Coke and black tea) and in artificial saliva for the following times: 24 hours, 7, 14 and 21 days, respectively. Color changes were measured by a spectrophotometer. Data were assessed by Multivariate Profile Analysis, Analysis of Variance (ANOVA) and Multiple Comparison Tests of means. RESULTS: There was a perceptible change of color in all ceramic brackets immersed in coffee (ΔE* Allure = 7.61, Inspire Ice = 6.09, Radiance = 6.69, Transcend = 7.44), black tea (ΔE* Allure = 6.24, Inspire Ice = 5.21, Radiance = 6.51, Transcend = 6.14) and red wine (ΔE* Allure = 6.49, Inspire Ice = 4.76, Radiance = 5.19, Transcend = 5.64), but no change was noticed in Coke and artificial saliva (ΔE < 3.7). CONCLUSION: Ceramic brackets undergo color change when exposed to solutions of coffee, black tea and red wine. However, the same crystalline structure, either monocrystalline or polycrystalline, do not follow the same or a similar pattern in color change, varying according to the bracket fabrication, which shows a lack of standardization in the manufacturing process. Coffee dye produced the most marked color changes after 21 days of immersion for most ceramic brackets evaluated.

Download Full-text

Evaluation of color stability of different temporary restorative materials

Revista de Odontologia da UNESP ◽

10.1590/1807-2577.0017 ◽

2015 ◽

Vol 44 (5) ◽

pp. 262-267 ◽

Cited By ~ 1

Author(s):

José Vitor Quinelli Mazaro ◽

Luiz Miguel Minani ◽

Adriana Cristina Zavanelli ◽

Caroline Cantieri de Mello ◽

Cleidiel Aparecido Araújo Lemos

Keyword(s):

Storage Time ◽

Color Change ◽

Artificial Saliva ◽

Color Stability ◽

Time Interval ◽

Acrylic Resins ◽

Significant Difference ◽

Restorative Materials ◽

Before And After ◽

Level Of Significance

AbstractIntroductionTemporary restorative materials are widely used, however, little is know about their color stability.Objectiveto evaluate the color stability of the following temporary restorative materials: acrylic and bis-acrylic resins after immersion in pigmenting solutions for different periods of storage.Material and methodFour materials were tested (Dêncor/Clássico, Protemp 4/3M ESPE; Structur 2 SC/Voco; Luxatemp AM Plus/DMG) and 30 test specimens (15 mm in diameter and 2 mm thick) per material were fabricated. They were divided according to the storage medium (artificial saliva, saliva + cola type soda, and saliva + coffee) and storage time intervals (2, 5, 7 and 15 days). Color measurements were made before and after immersions, with use of a spectrophotometer, by means of the CIE L*a*b* system. The data were analyzed by the analysis of variance and the Tukey Test, at a level of significance of 5%.ResultAcrylic resin presented greater color stability in comparison with bis-acrylic resins (p<0.001). When bis-acrylic resins were compared no significant difference was observed between the resins Structur and Luxatemp (p=0.767). As regards solutions tested, coffee showed the highest color change values (p<0.001), and the longer the storage time interval, the greater was the color change in all the temporary restorative materials analyzed (p<0.001).ConclusionAcrylic resin presented greater color stability in comparison with bis-acrylic resins (p<0.001). Coffee caused the greatest color change, and immersion time was determinant in color stability of the temporary materials analyzed.

Download Full-text

Effects of Immersion Media and Repolishing on Color Stability and Superficial Morphology of Nanofilled Composite Resin

Microscopy and Microanalysis ◽

10.1017/s1431927614001299 ◽

2014 ◽

Vol 20 (4) ◽

pp. 1234-1239 ◽

Cited By ~ 13

Author(s):

Ana Luísa Botta Martins de Oliveira ◽

Ana Carolina Botta ◽

Juliana Álvares Duarte Bonini Campos ◽

Patrícia Petromilli Nordi Sasso Garcia

Keyword(s):

Statistical Difference ◽

Composite Resin ◽

Color Change ◽

Artificial Saliva ◽

Color Stability ◽

Color Reading ◽

Immersion Medium ◽

Mixed Analysis ◽

Mouth Rinses ◽

Scanning Electron

AbstractThis study evaluated the influence of fluoride mouth rinses and repolishing on the superficial morphology and color stability of nanofilled resin. About 150 specimens were prepared and polished using aluminum oxide discs for 15 s with a pressure of 2 kg. The experimental groups were divided according to the immersion medium (artificial saliva, 0.5% sodium fluoride, Fluordent Reach, Oral B, Fluorgard) and repolishing procedure (without and with). The specimens were continuously immersed for 1 week. Thereafter, half of each sample was repolished. A color reading was performed after 24 h of immersion in the artificial saliva baseline, after continuous immersion, and after repolishing. The superficial morphology was examined using scanning electron microscopy (SEM) in a qualitative way. Color change (∆E) data were submitted to a mixed analysis of variance using a Shapiro–Wilk test (p>0.05 for the different immersion media) and Sidak’s test (p<0.05 for the differences between groups). In the interaction between the repolishing and the immersion media, Fluorgard showed a statistical difference between the ∆E values with and without repolishing (p<0.0001). On the SEM observations, both Fluordent Reach and Fluorgard caused degradation of the superficial resinous matrix of the composite after continuous immersion. This matrix was removed after repolishing.

Download Full-text

Microleakage under Ceramic and Metallic Brackets Bonded with Resin-Modified Glass Ionomer

The Angle Orthodontist ◽

10.2319/102607-508.1 ◽

2009 ◽

Vol 79 (1) ◽

pp. 138-143 ◽

Cited By ~ 9

Author(s):

Sabri Ilhan Ramoglu ◽

Tancan Uysal ◽

Mustafa Ulker ◽

Huseyin Ertas

Keyword(s):

Glass Ionomer ◽

Bonferroni Correction ◽

Adhesive Systems ◽

Dye Penetration ◽

Group 4 ◽

System A ◽

Significant Difference ◽

Resin Modified Glass Ionomer ◽

Ceramic Brackets ◽

Group 3

Abstract Objective: To test the null hypothesis that there is no significant difference between the microleakage of adhesive interferences at the occlusal and gingival margins of both ceramic and metallic brackets bonded with light-cured resin-modified glass ionomer and a conventional adhesive. Materials and Methods: Sixty freshly extracted human maxillary premolar teeth were randomly divided into four groups of 15 teeth each. Metal and ceramic brackets were bonded to groups 1 and 2 with resin-modified glass ionomer adhesive (RMGIA). Metal and ceramic brackets were bonded to group 3 and group 4 with a conventional adhesive (CA) system. A dye-penetration method was used for microleakage evaluation. Microleakage from the occlusal and gingival margins was determined by a stereomicroscope for the enamel-adhesive and bracket-adhesive interfaces. Statistical analysis was performed using the Kruskal-Wallis test and the Mann-Whitney U-test with a Bonferroni correction. Results: The gingival side of all groups exhibited higher microleakage scores compared with the occlusal side for both adhesive interfaces. All bracket and adhesive combinations displayed statistically significant differences in microleakage between the enamel-adhesive and adhesive-bracket interfaces at the occlusal and gingival sides of the brackets (P < .001). When the adhesive systems were compared, the RMGIA showed more microleakage than the CA between the different interfaces. Conclusions: The hypothesis is rejected. RMGIA results in more microleakage between enamel-adhesive interfaces.

Download Full-text

PENGARUH KOMUNIKASI TERAPEUTIK TERHADAP PENURUNAN TINGKAT KECEMASAN PASIEN PRE-OPERATIF DI IBS BLU RSUP Prof. Dr. R.D. KANDOU MANADO

e-NERS ◽

10.35790/ens.v1i1.1772 ◽

2013 ◽

Vol 1 (1) ◽

Author(s):

Reychie Janis Sanggel ◽

Jeavery Bawotong ◽

Gresty Masi

Keyword(s):

Null Hypothesis ◽

T Test ◽

Patient Anxiety ◽

Therapeutic Communication ◽

Significance Level ◽

Paired Samples ◽

Before And After ◽

Independent Variable ◽

Keywords Anxiety ◽

Different Levels

Abstrak: Dalam menyiapkan pasien yang akan dioperasi, maka perawat dituntut mampu menyiapkan pasien untuk siap menjalani tindakan pembedahan. Sehingga komunikasi terapeutik dapat diterapkan oleh perawat untuk mengurangi kecemasannya. Penelitian ini bertujuan untuk mengetahui pengaruh komunikasi terapeutik terhadap penurunan tingkat kecemasan pasien pre-operatif di IBS BLU RSUP Prof.Dr.R.D.Kandou Manado. Desain dalam penelitian ini adalah pra-eksperiment one group pretest-posttest design. Sampel adalah pasien yang akan menjalani operasi di IBS BLU RSUP Prof.Dr.R.D.Kandou Manado yang mempunyai kecemasan. Variabel independen adalah komunikasi terapeutik dan variabel dependen adalah tingkat kecemasan pasien pre-operatif. Analisa data menggunakan uji-T sampel berpasangan pada tingkat kemaknaan 95% (α ≤0,05) dengan bantuan program SPSS versi 20. Hasil analisa didapatkan nilai p=0,000, artinya p <α. Hal ini berarti hipotesis nol (H0) ditolak. Dengan kata lain terdapat perbedaan tingkat kecemasan sebelum dan sesudah dilakukan komunikasi terapeutik pada pasien pre-operatif di IBS BLU RSUP Prof.Dr.R.D.Kandou Manado. Kata kunci: kecemasan, komunikasi terapeutik, pasien pre-operatif. Abstract: In preparing the patient to be operated, the nurses are able to prepare patients to readily undergo surgery. So that therapeutic communication can be applied by nurses to reduce anxiety. This study aimed to determine the effect of therapeutic communication to the decline in the level of patient pre-operative anxiety in IBS BLU Dr Prof.Dr.RDKandou Manado. The design in this study were pre-experimental one group pretest-posttest design. Samples are patients who will undergo surgery in the department of Prof.Dr.RDKandou Manado BLU IBS who have anxiety. The independent variable was therapeutic communication and the dependent variable is the level of pre-operative patient anxiety. Analysis of data using paired samples T-test at 95% significance level (α ≤ 0.05) with SPSS version 20. Analysis results obtained p=0.000, meaning that p <α. This means that the null hypothesis (H0) is rejected. In other words, there are different levels of anxiety before and after therapeutic communication in pre-operative patients in the IBS BLU Dr Prof.Dr.RD. Kandou Manado. Keywords: anxiety, therapeutic communication, pre-operative patients.

Download Full-text

Six-Month Color Stability Assessment of Two Calcium Silicate-Based Cements Used in Regenerative Endodontic Procedures

Journal of Functional Biomaterials ◽

10.3390/jfb10010014 ◽

2019 ◽

Vol 10 (1) ◽

pp. 14 ◽

Cited By ~ 6

Author(s):

Paulo Palma ◽

Joana Marques ◽

Rui Falacho ◽

Eder Correia ◽

Alexandra Vinagre ◽

...

Keyword(s):

Calcium Silicate ◽

Saline Solution ◽

Color Space ◽

Mineral Trioxide Aggregate ◽

Color Stability ◽

Color Variation ◽

Color Measurement ◽

Suitable Alternative ◽

Significance Level ◽

Over Time

Aim: The purpose of the present study is to assess the color stability of two calcium silicate-based cements (CSCs) used in regenerative endodontic procedures (REPs). Methods: A total of 40 acrylic single-rooted transparent teeth, with immature apex, were used. Root canals were filled up to 3 mm below the level of the cementoenamel junction, with either saline solution (Mineral Trioxide Aggregate (MTA)/saline and Biodentine/saline) or blood (MTA/blood and Biodentine/blood). Subsequently, ProRoot MTA® or BiodentineTM was placed in the root canal to create a cervical barrier. Color measurement was carried out at four different evaluation periods (3 h, 72 h, 7 days, and 6 months). Shade analysis within the L* a* b* color space was performed and color variation (∆E) calculated. The significance level for statistical analysis was set at p < 0.05. Results: The four groups showed a significant decrease in L* values over time. The ΔE value increased over time for all groups but was not statistically significant for the Biodentine/blood group. Two-way ANOVA showed no interaction between the CSC and treatment (contact with saline solution or blood). CSC used was the factor responsible for ΔE over time, inducing statistically significant color variations from T3H to T7D (p = 0.04) and T3H to T6M (p < 0.01). After 6 months, MTA/saline had 5.08 (p = 0.001) higher ΔE than Biodentine/Saline and the MTA/blood had 3.65 (p = 0.009) higher than Biodentine/blood. Conclusions: After 6 months, regardless of blood exposure, Biodentine exhibits superior color stability compared to MTA. Biodentine might be a suitable alternative to MTA as a cervical barrier material in REPs.

Download Full-text

Does the temperature of beverages affect the surface roughness, hardness, and color stability of a composite resin?

European Journal of Dentistry ◽

10.4103/1305-7456.110161 ◽

2013 ◽

Vol 07 (02) ◽

pp. 165-171 ◽

Cited By ~ 8

Author(s):

Duygu Tuncer ◽

Emel Karaman ◽

Esra Firat

Keyword(s):

Surface Roughness ◽

Composite Resin ◽

Color Change ◽

Artificial Saliva ◽

Color Stability ◽

The Other ◽

Control Group ◽

Baseline Values ◽

Hardness Values ◽

Properties Of Composites

ABSTRACT Objective: To investigate the effect of beverages′ temperature on the surface roughness, hardness, and color stability of a composite resin. Materials and Methods: Fifty specimens of the Filtek Z250 composite (3M ESPE, Dental Products, St.Paul, MN, USA) were prepared and initial roughness, microhardness, and color were measured. Then the specimens were randomly divided into five groups of 10 specimens each: Coffee at 70°C, coffee at 37°C, cola at 10°C, cola at 37°C, and artificial saliva (control). After the samples were subjected to 15 min × 3 cycles per day of exposure to the solutions for 30 days, the final measurements were recorded. Results: After immersion in beverages, the artificial saliva group showed hardness values higher than those of the other groups (P < 0.001) and the microhardness values were significantly different from the initial values in all groups except for the control group. Both cola groups showed roughness values higher than the baseline values (P < 0.05), while the other groups showed values similar to the baseline measurements. When ΔE measurements were examined, the 70°C coffee group showed the highest color change among all the groups (P < 0.05). Conclusion: High-temperature solutions caused alterations in certain properties of composites, such as increased color change, although they did not affect the hardness or roughness of the composite resin material tested.

Download Full-text