scholarly journals Characterization and genesis of waterfalls of the Presidente Figueiredo region, Northeast State of Amazonas, Brazil

2001 ◽  
Vol 73 (2) ◽  
pp. 287-301 ◽  
Author(s):  
AFONSO C. R. NOGUEIRA ◽  
ROSEANE R. SARGES
Keyword(s):  
Lower Devonian ◽  
Normal Fault ◽  
Normal Faulting ◽  
Humid Climate ◽  
Lower Silurian ◽  
Rivers And Streams ◽  
Northern Brazil ◽  
Upper Silurian ◽  
Siliciclastic Rocks

The waterfalls of the Presidente Figueiredo municipality represent a fascinating natural scenery of northeast state of Amazonas, northern Brazil. The falls, generally less than 10m high, are developed on siliciclastic rocks of the Nhamundá (Lower Silurian), and Manacapuru (Upper Silurian - Lower Devonian) formations. Morphological and structural analyses of these features indicate that most of them originated through Quaternary neotectonics and are installed in NE-trending normal fault escarpments. Waterfalls also developed within pseudokarstic features, but are less frequent. The origin of the Presidente Figueiredo waterfalls probably goes back to the Neogene, when the region was submitted to laterization processes associated with a humid climate and a dense rainforest. These conditions favored the development of caves in quartzarenites of the Nhamundá Formation. During the Quaternary, the region was subjected to NE-trending normal faulting which displaced laterite layers, rivers and streams giving rise to waterfalls. These climatic and tectonic phenomena promoted intense relief dissection, as indicated by fault escarpment retreat and cave dismantlement, responsible for the present-day morphologic configuration.

The Silurian and Lower Devonian graptolite-bearing strata in the USSR (a review)

1973 ◽  
Vol 110 (1) ◽  
pp. 1-17 ◽  
Author(s):  
Tatjana N. Koren'
Keyword(s):  
Lower Devonian ◽  
Geological Mapping ◽  
Main Area ◽  
Lower Silurian ◽  
Black Clay ◽  
The Future ◽  
Upper Silurian

SummaryThe Silurian and Lower Devonian graptolite-bearing strata are widely distributed in both the platform and geosynclinal areas in the USSR. They are represented by black clay and siliceous shales, marlstones and argillites. In the main area of their distribution the regional zonal standard is established based on graptolites. They serve as the most detailed stratigraphical base for geological mapping and exploration and are used in the regional and inter-regional correlations. Correlation with other countries and continents is carried out by comparison of regional zonal successions with the unified standard of graptolite zones. The latter is compiled from the regional zonal subdivisions of the British, Czechoslovakian and Polish type sections. The zonal stratigraphy based on graptolites allows the establishment of the limits of the Silurian System and Stages/Series in the USSR. The Silurian and Lower Devonian sediments in the USSR are characterized by various geographically widespread graptolite assemblages. The most complete zonal subdivision is worked out for the Lower Silurian. The Upper Silurian and Lower Devonian zonal stratigraphy requires elaboration and precision in the future. The importance of graptolites in solving general geological problems particularly for establishing detailed stratigraphy of regions of industrial explorations considered.

The 4 December 2015 Mw 7.1 Normal-Faulting Antarctic Plate Earthquake and Its Seismotectonic Implications

2020 ◽  
Vol 110 (3) ◽  
pp. 1090-1100
Author(s):  
Ronia Andrews ◽  
Kusala Rajendran ◽  
N. Purnachandra Rao
Keyword(s):  
Body Wave ◽  
Focal Depth ◽  
Normal Fault ◽  
Normal Faults ◽  
Oceanic Plate ◽  
Normal Faulting ◽  
Transform Faults ◽  
Wave Inversion ◽  
Spreading Ridges ◽  
Southeast Indian Ridge

ABSTRACT Oceanic plate seismicity is generally dominated by normal and strike-slip faulting associated with active spreading ridges and transform faults. Fossil structural fabrics inherited from spreading ridges also host earthquakes. The Indian Oceanic plate, considered quite active seismically, has hosted earthquakes both on its active and fossil fault systems. The 4 December 2015 Mw 7.1 normal-faulting earthquake, located ∼700  km south of the southeast Indian ridge in the southern Indian Ocean, is a rarity due to its location away from the ridge, lack of association with any mapped faults and its focal depth close to the 800°C isotherm. We present results of teleseismic body-wave inversion that suggest that the earthquake occurred on a north-northwest–south-southeast-striking normal fault at a depth of 34 km. The rupture propagated at 2.7  km/s with compact slip over an area of 48×48  km2 around the hypocenter. Our analysis of the background tectonics suggests that our chosen fault plane is in the same direction as the mapped normal faults on the eastern flanks of the Kerguelen plateau. We propose that these buried normal faults, possibly the relics of the ancient rifting might have been reactivated, leading to the 2015 midplate earthquake.

scholarly journals Seismic-Scale Evidence of Thrust-Perpendicular Normal Faulting in the Western Outer Carpathians, Poland

Minerals ◽  
2021 ◽  
Vol 11 (11) ◽  
pp. 1252
Author(s):  
Jan Barmuta ◽  
Krzysztof Starzec ◽  
Wojciech Schnabel
Keyword(s):  
Large Scale ◽  
Fault Plane ◽  
Normal Fault ◽  
Normal Faulting ◽  
Seismic Profiles ◽  
Horizontal Movement ◽  
Outer Carpathians ◽  
Differential Uplift ◽  
Seismic Scale ◽  
Detachment Surface

Based on the interpretation of 2D seismic profiles integrated with surface geological investigations, a mechanism responsible for the formation of a large scale normal fault zone has been proposed. The fault, here referred to as the Rycerka Fault, has a predominantly normal dip-slip component with the detachment surface located at the base of Carpathian units. The fault developed due to the formation of an anticlinal stack within the Dukla Unit overlain by the Magura Units. Stacking of a relatively narrow duplex led to the growth of a dome-like culmination in the lower unit, i.e., the Dukla Unit, and, as a consequence of differential uplift of the unit above and outside the duplex, the upper unit (the Magura Unit) was subjected to stretching. This process invoked normal faulting along the lateral culmination wall and was facilitated by the regional, syn-thrusting arc–parallel extension. Horizontal movement along the fault plane is a result of tear faulting accommodating a varied rate of advancement of Carpathian units. The time of the fault formation is not well constrained; however, based on superposition criterion, the syn -thrusting origin is anticipated.

The Schneeberg Normal Fault Zone: Normal faulting associated with Cretaceous SE-directed extrusion in the Eastern Alps (Italy/Austria)

2005 ◽  
Vol 401 (3-4) ◽  
pp. 143-166 ◽  
Author(s):  
Helmuth Sölva ◽  
Bernhard Grasemann ◽  
Martin Thöni ◽  
Rasmus Thiede ◽  
Gerlinde Habler
Keyword(s):  
Fault Zone ◽  
Normal Fault ◽  
Eastern Alps ◽  
Normal Faulting

Validation of Coupled FDM-DEM Approach on the Soil-Raft Foundation Interaction Subjected to Normal Faulting

2021 ◽  
Author(s):  
Fang Ru-Ya ◽  
Lin Cheng-Han ◽  
Lin Ming-Lang
Keyword(s):  
Active Fault ◽  
Ground Deformation ◽  
Numerical Models ◽  
Hanging Wall ◽  
Normal Fault ◽  
Small Scale ◽  
Foot Wall ◽  
Normal Faulting ◽  
Raft Foundation ◽  
Overburden Soil

<p>Recent earthquake events have shown that besides the strong ground motions, the coseismic faulting often caused substantial ground deformation and destructions of near-fault structures. In Taiwan, many high-rise buildings with raft foundation are close to the active fault due to the dense population. The Shanchiao Fault, which is a famous active fault, is the potentially dangerous normal fault to the capital of Taiwan (Taipei). This study aims to use coupled FDM-DEM approach for parametrically analyzing the soil-raft foundation interaction subjected to normal faulting. The coupled FDM-DEM approach includes two numerical frameworks: the DEM-based model to capture the deformation behavior of overburden soil, and the FDM-based model to investigate the responses of raft foundation. The analytical approach was first verified by three  benchmark cases and theoretical solutions. After the verification, a series of small-scale sandbox model was used to validate the performance of the coupled FDM-DEM model in simulating deformation behaviors of overburden soil and structure elements. The full-scale numerical models were then built to understand the effects of relative location between the fault tip and foundation in the normal fault-soil-raft foundation behavior. Preliminary results show that the raft foundation located above the fault tip suffered to greater displacement, rotation, and inclination due to the intense deformation of the triangular shear zone in the overburden soil. The raft foundation also exhibited distortion during faulting. Based on the results, we suggest different adaptive strategies for the raft foundation located on foot wall and hanging wall if the buildings are necessary to be constructed within the active fault zone. It is the first time that the coupled FDM-DEM approach has been carefully validated and applied to study the normal fault-soil-raft foundation problems. The novel numerical framework is expected to contribute to design aids in future practical engineering.</p><p><strong>Keywords</strong>: Coupled FDM-DEM approach; normal faulting; ground deformation; soil-foundation interaction; raft foundation.</p>

Geochemistry of Sainte-Marguerite volcanic rocks: implications for the evolution of Silurian–Devonian volcanism in the Gaspé Peninsula

2008 ◽  
Vol 45 (1) ◽  
pp. 15-29 ◽  
Author(s):  
Alan D’hulst ◽  
Georges Beaudoin ◽  
Michel Malo ◽  
Marc Constantin ◽  
Pierre Pilote
Keyword(s):  
Lower Devonian ◽  
Volcanic Rocks ◽  
Magma Source ◽  
Volcanic Arc ◽  
Lower Silurian ◽  
Trace Element Signature ◽  
Arc Setting ◽  
Back Arc ◽  
Gaspe Peninsula ◽  
Gaspé Peninsula

The Lower Devonian Sainte-Marguerite volcanic rocks are part of a Silurian–Devonian volcanic sequence deposited between the Taconian and Acadian orogenies in the Gaspé Peninsula, Quebec, Canada. The Sainte-Marguerite unit includes basaltic and dacitic lava flows with calc-alkaline and volcanic-arc affinities. Such affinities are also recorded by the trace-element signature in Lower Silurian and most Lower Devonian volcanic units of the Gaspé Peninsula. However, most of the other Silurian–Devonian volcanic rocks occurring in the Gaspé Peninsula have been previously interpreted to have erupted in an intracontinental setting. A back-arc setting for the Gaspé Peninsula between the Taconian and Acadian orogenies could account for these subduction volcanic-arc signatures, though a metasomatized lithospheric mantle magma source, unrelated to subduction, cannot be excluded. Lower Silurian and Lower Devonian volcanic rocks in the central part of the Gaspé Peninsula show an arc affinity, whereas Upper Silurian and Lower to Middle Devonian volcanic rocks, located in the south and north of the Gaspé Peninsula, respectively, show a within-plate affinity. The Lower Devonian Archibald Settlement and Boutet volcanic rocks of the southern and northern Gaspé Peninsula, respectively, show a trend toward a within-plate affinity. This suggests that within-plate volcanism migrated from south to north through time in an evolving back-arc environment and that the subduction signature of Lower Silurian and Lower Devonian rocks results from a source that melted only under the central part of the Gaspé Peninsula.

Coexistence of pyrophyllite, I-S, R1 and NH4+-rich illite in Silurian black shales (Sierra de Albarracín, NE Spain): metamorphic vs. hydrothermal origin

Clay Minerals ◽  
2010 ◽  
Vol 45 (3) ◽  
pp. 383-392 ◽  
Author(s):  
B. Bauluz ◽  
I. Subías
Keyword(s):  
Organic Matter ◽  
Clay Mineral ◽  
Hydrothermal Alteration ◽  
Black Shales ◽  
Low Grade ◽  
Lower Silurian ◽  
Igneous Activity ◽  
Upper Silurian ◽  
Ne Spain ◽  
Regional Tectonics

AbstractA set of Silurian black shales from Sierra de Albarracín (NE Spain) corresponding to two different sections was studied to determine the relative influence of diagenesis, igneous activity, and regional tectonics on the clay-mineral genesis. The coexistence of pyrophyllite, I-S interstratifications (R1), ammonium-rich illite, potassium illite, kaolin, and chlorite is not the result of prograde evolution during diagenesis – very low-grade metamorphism. Three different stages may be inferred: (1) sedimentation of black shales (Aeronian, Lower Silurian, to basal Ludfordian, Upper Silurian) and the subsequent diagenetic process producing the coexistence of quartz, illite, kaolinite, organic matter, etc.; (2) intrusion of andesitic sills producing hydrothermal alteration and crystallization of pyrophyllite, ammonium-rich illites, smectite, I-S R1 phases and jarosite; and (3) and folding of shales and sills and development of penetrative schistosity during the late Variscan leading to illite and paragonite recrystallization reaching the anchizone grade.

Sign in / Sign up

Export Citation Format

Share Document