scholarly journals The use of the Fourier Transform Infrared spectroscopy to determine adulterants in raw milk

2011 ◽  
Vol 40 (11) ◽  
pp. 2591-2596 ◽  
Author(s):  
Laerte Dagher Cassoli ◽  
Beatriz Sartori ◽  
Paulo Fernando Machado
2017 ◽  
Vol 54 (8) ◽  
pp. 2394-2402 ◽  
Author(s):  
Tatiane Barbosa Coitinho ◽  
Laerte Dagher Cassoli ◽  
Pedro Henrique Ramos Cerqueira ◽  
Helen Krystine da Silva ◽  
Juliana Barbosa Coitinho ◽  
...  

1979 ◽  
Vol 33 (6) ◽  
pp. 551-555 ◽  
Author(s):  
Stoil Dirlikov ◽  
Jack L. Koenig

Fourier transform infrared spectrum of atactic poly(methyl methacrylate) (PMMA) is compared with that of atactic PMMA labeled with 18O in the ester groups. The results obtained define the assignment of the bands associated with vibrations of the ester groups of PMMA. Furthermore, the Fourier transform infrared spectroscopy provides a simple method for obtaining the spectra of “pure” derivatives containing 18O.


2016 ◽  
Vol 47 (6) ◽  
pp. 993-1005 ◽  
Author(s):  
Yasemin Cakmak ◽  
M Fatih Canbolat ◽  
Enes Cakmak ◽  
Mehmet Dayik

The aim of this study was to produce advanced nanofiber mats by adding boron nitride to poly (ɛ-caprolactone) polymer using an electrospinning method and to characterize the resultant structures. Pure poly (ɛ-caprolactone) nanofiber mats and boron nitride-doped nanofiber mats prepared at different concentrations were compared. The morphological structures of the nanofiber mats were examined under a scanning electron microscope, spectroscopic analyses were conducted using Fourier transform infrared spectroscopy, and thermal stability was analyzed using a thermogravimetric analysis method. Successful electrospinning of boron nitride-doped nanofibers at lower voltages was achieved. The thermogravimetric analysis test found that the thermal stability of boron nitride-doped nanofiber mats is higher than that of pure nanofibers, which suggests that the produced composite material could be preferable in applications involving insulation and high temperature. On the other hand, the Fourier transform infrared spectroscopy results indicated that no chemical reaction occurred between boron nitride and the poly (ɛ-caprolactone) nanofibers.


2018 ◽  
Author(s):  
sinardi ◽  
Prayatni Soewondo ◽  
Suprihanto Notodarmojo ◽  
cynthia radiman

Chitosan is a natural product derived from biopolymers such as chitin and cellulose and is found in the exoskeleton of marine sources. Chitosan was produced through 3 subsequent processes i.e. deproteination, demineralization and deacetylation.The aim of this study is to determine degree of deacetylation chitosan. The degree of deacetylation was calculated from IR spectrum using the Fourier Transform Infrared spectroscopy (FTIR). The degree of deacetylation of chitosan from Penaeusmonodon, Scylla sp, and Mytilus virdis linneausshells, were 89.05%, 87.64%, and 77.80%. Marine shells used as raw material of chitosan and enhancement degree of deacetylation potential to be used as natural coagulant.


2013 ◽  
Vol 307 ◽  
pp. 372-376 ◽  
Author(s):  
Koshiro Mizobe ◽  
Masahiro Takamiya ◽  
Takashi Honda ◽  
Hitonobu Koike ◽  
Edson Costa Santos ◽  
...  

Polyetheretherketone (PEEK), a tough semi-crystalline thermoplastic polymer with excellent mechanical properties and polytetrafluoroethylene (PTFE), valued for its low friction coefficient are popular materials used for the production of bearings. In this work, rolling contact fatigue (RCF) tests were performed in order to investigate wear on bearing surfaces by using the Fourier Transform Infrared Spectroscopy (FT-IR). It is reported that PEEK’s specific peak at 1243cm-1was shifted and PEEK’s polymer bearing crystalline content level on wear surface remained unchanged by contact stress or wear debris adhesion.


2021 ◽  
Vol 22 (9) ◽  
Author(s):  
Wismaroh Sanniwati Saragih ◽  
EDISON Purba ◽  
Lisnawita LISNAWITA ◽  
MOHAMMAD BASYUNI

Abstract. Saragih WS, Purba E, Lisnawita, Basyuni M. 2021. The Fourier transform infrared spectroscopy from Diplazium esculentum and Rivina humilis analysis reveals necessary components in oil palm plantations of Ganoderma boninense control. Biodiversitas 22: 3645-3651. The Fourier transform infrared spectroscopy (FTIR) has been widely utilized for biological samples and biomolecular characterization. We aim to identify Ganoderma boninense through FTIR and obtain a functional group that can facilitate early basal stem rot detection. Here, positive control (KP) was not inoculated with G. boninense and negative control (KN) was inoculated with G. boninense. However, the treatment samples, Diplazium esculentum leaf extract, Rivina humilis leaf extract, and fungicide treatment, were not inoculated with G. boninense. The positive control oil-palm leaf samples exhibited spectral bands similar to those in the D. esculentum extract, R. humilis extract, and fungicide treatment. Strong bonds were observed at wavelengths 3379 cm-1, 2927 cm-1, 1639 cm-1, and 1056 cm-1. Others were moderate to weak, except the negative control samples with strong bonds at 2044 cm-1. This indicates amine N-H functional groups, alkane functional group C-H, functional group alkene C=C, C-O, functional group ester, and functional group isothiocyanate N=C=S (C4H5NS or CH2 = CHCH2N=C=S). The FTIR plot result denotes G. boninense through N=C=S Isothiocyanate functional group presence at 2140-1990 cm-1. This unique structure is only found in infected oil-palm leaf tissues of G. boninense. Our study suggests that FTIR spectroscopy is more beneficial than conventional methods in early detection of G. boninense infection in oil palm.


2015 ◽  
Vol 19 (4) ◽  
pp. 1337-1340
Author(s):  
Yan Zhang ◽  
Yuyue Chen ◽  
Hong Lin

Silk yarns which are composed of two single yarns with different twist directions are treated with calcium nitrate solution at 95 ?C, and a 3-D crimped structure is formed. The Fourier transform infrared spectroscopy spectrum is used to reveal the change of the secondary structures of silk fiber.


2016 ◽  
Vol 698 ◽  
pp. 13-18 ◽  
Author(s):  
Koichi Tanaka ◽  
Taichi Yoshida

We fabricated Si:SiO2 films and assessed its characterization of photoluminescence and surface chemistry. When Si tablets on a SiO2 target were sputtered in a chamber of a radio frequency sputtering device, Si:SiO2 films were deposited on a substrate. When the films were excited by a He-Cd laser, photoluminescence having wide and continuous peaks was emitted in shorter region than 600 nm. After annealing, intensity of photoluminescence changed, which depends on annealing temperature and time. By the Fourier Transform InfraRed Spectroscopy, bonds of atoms around Si were investigated.


Sign in / Sign up

Export Citation Format

Share Document