scholarly journals FORMULATION AND EVALUATION OF CURCUMIN LOADED LIPOSOME AND ITS BIO-ENHANCEMENT

2019 ◽  
Vol 9 (4-A) ◽  
pp. 425-437
Author(s):  
Khushboo Verma ◽  
Jhakeshwar Prasad ◽  
Suman Saha ◽  
Surabhi Sahu
Keyword(s):  
Thin Film ◽  
Particle Size ◽  
Drug Release ◽  
Zeta Potential ◽  
High Performance ◽  
Encapsulation Efficiency ◽  
Mean Particle Size ◽  
Liposome Formulation

The aim of this work was to develop and evaluate curcumin loaded liposome and its bio- enhancement. Curcumin was selected as a natural drug for liposome formulation. Curcumin show variety of biological activity but it also shows poor bioavailability due to low aqueous solubility (1 µg/ml), poor absorption and rapid metabolism so that piperine was selected as bio enhancer to improve curcumin bioavailability. Soy lecithin and cholesterol were used to prepared curcumin and curcumin-piperine loaded liposome at different ratio by thin film hydration method because of easy to perform, and high encapsulation rates of lipid. The all liposome formulations (F1-F5) were evaluated by mean particle size, polydispersity index, zeta potential, encapsulation efficiency and drug release. Bioavailability was also determined on rat. Blood samples were collected at specific intervals, and plasma was separated by ultracentrifugation. Plasma was analyzed by high-performance liquid chromatography at 425 nm taking acetonitrile: water (75:25 v/v) acidified with 2% acetic acid as a mobile phase at a flow rate of 0.5 ml/min using C18 column. The mean particle size was found in the range between 800-1100 that indicate liposome are large unilamellar vesical types. By zeta potential study its conform that the all formulation was stable. The encapsulation efficiency of all liposome formulation are varied between 59-67%. In vitro drug release was analyse in 7.4 pH phosphate buffer, the maximum %CDR observed at the 12 hrs., and formulation are follow sustained release thus they reduce metabolism, good absorption rate which improve bioavailability of drug. From in-vivo study, it is clear that curcumin-piperine liposomal formulation, increases Cmax, area under the curve, and mean residence time significantly as compared to pure curcumin and pure curcumin liposome. Keywords: liposome; Curcumin; Piperine, Thin film hydration method; Bioavailability

Formulation and evaluation of resveratrol loaded cubosomal nanoformulation for topical delivery

2020 ◽  
Vol 17 ◽  
Author(s):  
Bhaskar Kurangi ◽  
Sunil Jalalpure ◽  
Satveer Jagwani
Keyword(s):  
Drug Delivery ◽  
Particle Size ◽  
Drug Release ◽  
Zeta Potential ◽  
Topical Application ◽  
In Vitro Release ◽  
Entrapment Efficiency ◽  
Drug Permeation

Aim: The aim of the study was to formulate, characterize, and evaluate the resveratrol-loaded cubosomes (RC) through topical application. Background: Resveratrol (RV) is a nutraceutical compound that has exciting pharmacological potential in different diseases including cancers. Many studies of resveratrol have been reported for anti-melanoma activity. Due to its low bioavailability, the activities of resveratrol are strongly limited. Hence, an approach with nanotechnology has been done to increase its activity through transdermal drug delivery. Objective: To formulate, characterize, and evaluate the resveratrol-loaded cubosomes (RC). To evaluate resveratrol-loaded cubosomal gel (RC-Gel) for its topical application. Methods: RC was formulated by homogenization technique and optimized using a 2-factor 3-level factorial design. Formulated RCs were characterized for particle size, zeta potential, and entrapment efficiency. Optimized RC was evaluated for in vitro release and stability study. Optimized RC was further formulated into cubosomal gel (RC-Gel) using carbopol and evaluated for drug permeation and deposition. Furthermore, developed RC-Gel was evaluated for its topical application using skin irritancy, toxicity, and in vivo local bioavailability studies. Results: The optimized RC indicated cubic-shaped structure with mean particle size, entrapment efficiency, and zeta potential were 113±2.36 nm, 85.07 ± 0.91%, and -27.40 ± 1.40 mV respectively. In vitro drug release of optimized RC demonstrated biphasic drug release with the diffusion-controlled release of resveratrol (RV) (87.20 ± 2.25%). The RC-Gel demonstrated better drug permeation and deposition in mice skin layers. The composition of RC-Gel has been proved non-irritant to the mice skin. In vivo local bioavailability study depicted the good potential of RC-Gel for skin localization. Conclusion: The RC nanoformulation proposes a promising drug delivery system for melanoma treatment simply through topical application.

scholarly journals Formulation and evaluation of carvedilol microcapsules using Eudragit NE30D and sodium alginate

2013 ◽  
Vol 49 (4) ◽  
pp. 889-901 ◽  
Author(s):  
Trishna Bal ◽  
Shubhranshu Sengupta ◽  
Padala Narasimha Murthy
Keyword(s):  
Particle Size ◽  
Drug Release ◽  
Sodium Alginate ◽  
Encapsulation Efficiency ◽  
In Vitro Release ◽  
Kinetic Equations ◽  
Oral Feeding ◽  
Primary Role

Inclusion complexes of carvedilol(CR) with hydroxyl propyl beta-cyclodextrin (HPBCD) was prepared using co-grinding technique. Then, the inclusion complex was microencapsulated using combinations of Eudragit NE30D (EU) and sodium alginate (SA) utilizing orifice gelation technique. The formulations were analysed by using Scanning electron microscopy (SEM), Fourier Transform Infrared spectroscopy (FTIR), Differential scanning Calorimetry (DSC) and X-ray diffractometer (XRD) and also evaluated for particle size, encapsulation efficiency, production yield, swelling capacity, mucoadhesive properties, zeta potential and drug release. The microcapsules were smooth and showed no visible cracks and extended drug release of 55.2006% up to 12 hours in phosphate buffer of pH 6.8, showing particle size within the range of 264.5-358.5 µm, and encapsulation efficiency of 99.337±0.0100-66.2753±0.0014%.The in vitro release data of optimized batch of microcapsules were plotted in various kinetic equations to understand the mechanisms and kinetics of drug release, which followed first order kinetics, value of "n" is calculated to be 0.459 and drug release was diffusion controlled. The mice were fed with diet for inducing high blood pressure and the in vivo antihypertensive activity of formulations was carried out administering the optimized formulations and pure drug separately by oral feeding and measured by B.P Monwin IITC Life Science instrument and the results indicated that the bioavailability of carvedilol was increased both in vitro and in vivo with the mucoadhesive polymers showing primary role in retarding the drug release.

Quercetin Loaded Nanostructured Lipid Carriers-based Gel for Rheumatoid Arthritis: Formulation, Characterization and in vivo Evaluation

2018 ◽  
Vol 11 (1) ◽  
pp. 3967-3977
Author(s):  
Jayanti P Gokhale ◽  
Sanjay S Surana
Keyword(s):  
Rheumatoid Arthritis ◽  
Particle Size ◽  
Drug Release ◽  
Zeta Potential ◽  
Blood Cells ◽  
Ex Vivo ◽  
In Vitro Drug Release ◽  
Texture Profile

Present research work describes the development of potential topical treatment containing nanostructured lipid carriers (NLCs) for rheumatoid arthritis (RA). Quercetin (QCT) is a renowned flavonol useful as model drug for carriers. QCT loaded NLCs were prepared and evaluated for particle size distribution, polydispersity index, zeta potential analysis, in vitro drug release study. Ex vivo study was carried out to evaluate the effect of NLCs on cell proliferation (HIG-82 cell line) and inflammation (TNF-α induction in RAW264.7 cells). The QCT-NLCs showed mean particle size of 155.6 ± 1.8 nm and polydispersity index (PDI) was 0.236 ± 0.4, entrapment efficiency of 95.63 ± 0.14 % and zeta potential of -27 ± 1.2 mV. For the ease of application, NLCs were incorporated into the gel base and final formulation was evaluated for rheological study, texture profile, drug release and antiarthritic activity. QCT-NLC gel showed pseudo plastic flow behavior with excellent texture profile parameters. In vitro drug release studies showed that, QCT-NLC gel has more prominent permeation profile as compared with QCT-loaded gel. In vivo activity was carried out using Complete Freund's adjuvant (CFA) induced arthritic model. Evaluation of the severity of rheumatoid arthritis was done by measurements of hind paw volume, arthritis score and haematological parameters such as rheumatoid factor (RF), C-reactive protein (CRP), red blood cells (RBCs), white blood cells (WBCs), erythrocyte sedimentation rate (ESR) and hemoglobin (Hb). Edema and erythema were not observed after administration of QCT-NLC- gel on the rat skin. In conclusion, the results of in vitro and ex vivo studies, QCT-NLC gel appears a viable formulation system for topical delivery of QCT in the treatment of RA.         

scholarly journals Solid Lipid Microparticles Loaded Hydrogel Formulation for Transdermal Delivery of Glucosamine Sulphate

2021 ◽  
Vol 10 (14) ◽  
pp. 1030-1034
Author(s):  
Sundareswara Kumar Chellaswamy ◽  
Satheesh Babu Natrajan
Keyword(s):  
Particle Size ◽  
Drug Release ◽  
Zeta Potential ◽  
Encapsulation Efficiency ◽  
Stability Studies ◽  
Potential Value ◽  
Solid Lipid ◽  
Age Related ◽  
Dispersion Technique

BACKGROUND Osteoarthritis is a common, age-related, chronic and slowly progressive joint disorder which ultimately leads to joint failure. To achieve sustained release drug delivery and ease of administration, the present study was carried out to formulate a glucosamine solid lipid microparticle-based hydrogel. METHODS 20 batches of glucosamine solid lipid microparticle were prepared by melt dispersion technique. They were then evaluated with regard to various parameters such as physical appearance, pH analysis, spreadability, viscosity, drug content, in vitro drug release and accelerated stability studies. Then the glucosamine solid lipid microparticle-based hydrogel was compared with the glucosamine loaded hydrogel. RESULTS Of these batches, batches 18, 19 and 20 of increasing homogenizing speed of 1000, 1500 and 2000 rpm were found be efficient but the batch 18 showed better encapsulation efficiency. Batch 18 showed particle size of 86 ± 5 µm, encapsulation efficiency of 81.74 ± 4.5 and the zeta potential value of - 29 ± 1. So, batch 18 was found to be the optimised formulation which was further taken for incorporating the Carbopol. The efficient encapsulated glucosamine solid lipid microparticle-based hydrogel was formulated. There were no significant changes in physicochemical properties on stability studies. CONCLUSIONS Glucosamine solid lipid microparticle-based hydrogel had good particle size, high encapsulation efficiency and high zeta potential value and showed high percentage drug release which was better than the glucosamine loaded hydrogel. KEY WORDS Glucosamine Solid Lipid Microparticle Based Hydrogel, Osteoarthritis, Encapsulation Efficiency, Zeta Potential, Melt Dispersion Technique

scholarly journals Optimization and Characterization of Fenugreek Seed Polymer Nanoparticles Loaded with Diltiazem HCl Nanoparticles by Desolvation Method

2019 ◽  
Vol 9 (6-s) ◽  
pp. 155-163
Author(s):  
Munagala Gayatri Ramya ◽  
Rajesh Akki ◽  
Chakrala Jyothsna
Keyword(s):  
Particle Size ◽  
Drug Release ◽  
Zeta Potential ◽  
Surface Morphology ◽  
Encapsulation Efficiency ◽  
Polymer Concentration ◽  
Polymer Nanoparticles ◽  
Fenugreek Seed ◽  
Diltiazem Hcl

The main aim of the present investigation is to optimize and evaluate the fenugreek seed polymer nanoparticles using Diltiazem HCl as a model drug because Diltiazem HCl has short half-life. Nanoparticles were prepared by using desolvation method and evaluated to study the influence of polymer concentration and stirring speed on different characteristics of nanoparticles such as particle size, surface morphology, zeta potential, Encapsulation efficiency and In-vitro drug release. FTIR, DSC and XRD studies were also performed to determine the compatibility, degradation and crystalline nature of drug before and after formulation of nanoparticles. F7 (1:2 polymer concentration and 600 stirring speed) was optimized formulation based on its particle size (672.1nm), encapsulation efficiency (83.1) having higher stability of Zeta potential value of -26.2, smooth surface morphology and having higher retarded drug release with non fickkian diffusion. By studying all the characteristics it was finally concluded that a natural polymer obtained from fenugreek seed can be used as a rate controlling polymer in the preparation of nanoparticles. Keywords:  Diltiazem HCl, Fenugreek seed polymer, rate controlling polymer,      Nanoparticles, Desolvation.

Formulation and Evaluation of Nanosuspension of Simvastatin

2015 ◽  
Vol 8 (2) ◽  
pp. 2858-2873
Author(s):  
Rupali L. Shid ◽  
Shashikant N. Dhole ◽  
Nilesh Kulkarni ◽  
Santosh L Shid
Keyword(s):  
Particle Size ◽  
Zeta Potential ◽  
Factorial Design ◽  
Dissolution Rate ◽  
In Vitro Dissolution ◽  
Total Drug ◽  
23 Factorial Design ◽  
Rate Of Dissolution

Poor water solubility and slow dissolution rate are issues for the majority of upcoming and existing biologically active compounds. Simvastatin is poorly water-soluble drug and its bioavailability is very low from its crystalline form. The purpose of this study wasto increase the solubility and dissolution rate of simvastatin by the  preparation of nanosuspension by emulsification solvent diffusion method at laboratory scale. Prepared nanosus-pension was evaluated for its particle size and in vitro dissolution study and characterized by zeta potential,differential scanning calorimetry (DSC) and X-Ray diffractometry (XRD), motic digital microscopy, entrapment efficiency, total drug content, saturated solubility study and in vivo study. A 23 factorial design was employed to study the effect of independent variables, amount of SLS (X1), amount of PVPK-30 (X2) and poloxamer-188 (X3) and dependent variables are total drug content and polydispersity Index. The obtained results showed that particle size (nm) and rate of dissolution has been improved when nanosuspension prepared with the higherconcentration of PVPK-30 with the higher concentration of PVP K-30 and Poloxamer-188 and lower concentration of SLS. The particle size and zeta potential of optimized formulation was found to be 258.3 nm and 23.43. The rate of dissolution of the optimized nanosuspension was enhanced (90% in 60min), relative to plain simvastatin  (21% in 60 min), mainly due to the formation of nanosized particles. These results indicate the suitability of 23 factorial  design for preparation of simvastatin loaded nano-suspension significantly improved in vitro dissolution rate and thus possibly enhance fast onset of therapeutic drug effect. In vivo study shows increase in bioavailability in nanosuspension formulation than the plain simvastatin drug.

Optimization and Characterization of Aqueous Micellar Formulations for Ocular Delivery of an Antifungal Drug, Posaconazole

2020 ◽  
Vol 26 (14) ◽  
pp. 1543-1555 ◽  
Author(s):  
Meltem E. Durgun ◽  
Emine Kahraman ◽  
Sevgi Güngör ◽  
Yıldız Özsoy
Keyword(s):  
Particle Size ◽  
Zeta Potential ◽  
Size Distribution ◽  
Encapsulation Efficiency ◽  
Fungal Infections ◽  
In Vitro Release ◽  
Pluronic F127 ◽  
Glycol Succinate ◽  
Vitro Release

Background: Topical therapy is preferred for the management of ocular fungal infections due to its superiorities which include overcoming potential systemic side effects risk of drugs, and targeting of drugs to the site of disease. However, the optimization of effective ocular formulations has always been a major challenge due to restrictions of ocular barriers and physiological conditions. Posaconazole, an antifungal and highly lipophilic agent with broad-spectrum, has been used topically as off-label in the treatment of ocular fungal infections due to its highly lipophilic character. Micellar carriers have the potential to improve the solubility of lipophilic drugs and, overcome ocular barriers. Objective: In the current study, it was aimed optimization of posaconazole loaded micellar formulations to improve aqueous solubility of posaconazole and to characterize the formulations and to investigate the physical stability of these formulations at room temperature (25°C, 60% RH), and accelerated stability (40°C, 75% RH) conditions. Method: Micelles were prepared using a thin-film hydration method. Pre-formulation studies were firstly performed to optimize polymer/surfactant type and to determine their concentration in the formulations. Then, particle size, size distribution, and zeta potential of the micellar formulations were measured by ZetaSizer Nano-ZS. The drug encapsulation efficiency of the micelles was quantified by HPLC. The morphology of the micelles was depicted by AFM. The stability of optimized micelles was evaluated in terms of particle size, size distribution, zeta potential, drug amount and pH for 180 days. In vitro release studies were performed using Franz diffusion cells. Results: Pre-formulation studies indicated that single D-ɑ-tocopheryl polyethylene glycol succinate (TPGS), a combination of it and Pluronic F127/Pluronic F68 are capable of formation of posaconazole loaded micelles at specific concentrations. Optimized micelles with high encapsulation efficiency were less than 20 nm, approximately neutral, stable, and in aspherical shape. Additionally, in vitro release data showed that the release of posaconazole from the micelles was higher than that of suspension. Conclusion: The results revealed that the optimized micellar formulation of posaconazole offers a potential approach for topical ocular administration.

scholarly journals 708 Application of a novel mSENS drug delivery technology for mRNA therapeutics

2020 ◽  
Vol 8 (Suppl 3) ◽  
pp. A750-A750
Author(s):  
Sojin Lee ◽  
Joon Young Park ◽  
Goo-Young Kim ◽  
Sang Woo Jo ◽  
Minhyuk Yun ◽  
...  
Keyword(s):  
Particle Size ◽  
Protein Expression ◽  
Cancer Vaccine ◽  
Encapsulation Efficiency ◽  
Tumor Model ◽  
Cell Responses ◽  
Delivery Platform ◽  
Mrna Therapeutics

BackgroundSuccessful clinical translation of mRNA therapeutics requires an appropriate delivery strategy to overcome instability of mRNA and facilitate cellular uptake into the cells.1 Several lipid based nanoparticle approaches that encapsulate mRNA, notably lipid nanoparticle (LNP), have been developed, but their efficiency for delivery to certain target tissues and toxicity profiles still have room for improvement. The application of a novel polymer based nanoparticle technology platform, so called Stability Enhanced Nano Shells (SENS) for mRNA (mSENS) as a mRNA delivery platform for a cancer vaccine was demonstrated.MethodsThe physicochemical properties of mSENS formulation, particle size and encapsulation efficiency, were characterized using dynamic light scattering (DLS) and gel retardation assay. Using luciferase-encoding mRNA, the protein expression levels in vitro and in vivo were evaluated by luciferase assay or bioluminescence imaging (BLI), respectively. For cancer vaccine studies, antigen (tyrosinase-related protein 2 (Trp-2))-specific T cell responses were assessed by immunophenotyping mouse splenocytes using flow cytometry and by the enzyme-linked immunosorbent spot (ELISPOT) assay. The anti-tumor efficacy was studied in B16F10 lung tumor model in C57BL/6 mice. Liver and systemic toxicity of mSENS treated mice was evaluated through blood chemistry and complete blood count (CBC) tests.ResultsA library of mSENS formulations complexed with luciferase-encoding mRNA, were characterized for their particle size, surface charge, encapsulation efficiency, colloidal stability, and in vitro and in vivo luciferase protein expression level. Upon systemic administration in mice, varying biodistribution profiles were observed, implicating the potential for tailored delivery to target tissues. Particularly, cancer vaccine application was further developed leveraging the formulation with preferential spleen delivery. Following vaccination with Trp-2 mRNA encapsulated with mSENS (Trp-2 mRNA-mSENS) in B16F10 tumor bearing mice, strong Trp-2 antigen-specific IFN-γ T-cell responses were observed. Generated anti-tumor immunity also marked suppression of B16F10 lung tumors were observed in Trp-2-mSENS immunized mice compared to non-immunized controls, demonstrating the potential of mSENS as a mRNA delivery platform for the application for vaccine.ConclusionsProprietary biodegradable polymer based-mSENS platform offers an attractive delivery strategy for mRNA by tailoring to specific therapeutic applications. Depending on the application, whether it’s a vaccine or protein replacement, a rationally designed mSENS formulation can efficiently distribute mRNA to specific tissues. In particular, application of a splenic mSENS formulation for a cancer vaccine has been demonstrated in murine tumor model. In summary, mRNA delivery through mSENS platform is expected to provide significant opportunities in clinical development for mRNA therapeutics.Ethics ApprovalThe study was approved by Samyang Biopharmaceuticals’ IACUC (Institutional Animal Care and Use Committee), approval number SYAU-2027.ReferencePiotr S. Kowalski, Arnab Rudra, Lei Miao, and Daniel G. Anderson, delivering the messenger: advances in technologies for therapeutic mRNA delivery. Molecular Therapy Vol. 27 No 4 April 2019.

scholarly journals FORMULATION AND CHARACTERIZATION OF PAPAIN LOADED SOLID LIPID NANOPARTICLES AGAINST HUMAN COLORECTAL ADENOCARCINOMA CELL LINE

2018 ◽  
Vol 11 (10) ◽  
pp. 393
Author(s):  
Suriyakala Perumal Chandran ◽  
Kannikaparameswari Nachimuthu
Keyword(s):  
Particle Size ◽  
Drug Release ◽  
Zeta Potential ◽  
Cell Viability ◽  
Cell Line ◽  
Solid Lipid Nanoparticles ◽  
Colorectal Adenocarcinoma ◽  
Lipid Nanoparticles ◽  
In Vitro Drug Release

Objective: Colorectal cancer is one of the most commonly diagnosed cancer and also most common gastrointestinal malignancy with high prevalence rate in the younger population. Usually, cancer cells are surrounded by a fibrin coat which is resistant to fibrinolytic degradation. This fibrin coat is act as self-protective against natural killing mechanism. The main objective was to prepare papain-loaded solid lipid nanoparticles (P-SLN) by melt dispersion-ultrasonication method and investigated the cytotoxic efficacy against colorectal adenocarcinoma (human colorectal adenocarcinoma [HCT 15]) cells.Methods: Optimized polymer ratio was characterized by differential scanning calorimetry, Fourier-transform infrared, X-ray diffraction, scanning electron microscopy, entrapment efficiency, particle size and zeta potential analysis, in vitro drug release, and in vitro cytotoxicity studies on HCT-15 colorectal adenocarcinoma cells.Results: The results showed that the particle size, morphological character and zeta potential value of optimized batch P-SLN were 265 nm, spherical and −26.5 Mv, respectively. The in vitro drug profile of P-SLN exhibited that it produced sustain drug release, and the cell viability of HCT-15 against P-SLN shown better efficacy than pure papain enzyme.Conclusion: P-SLNs were successfully prepared and investigated the in vitro drug release and in vitro cell viability against HCT-15 cell line.

scholarly journals Formulation, Development and Evaluation of Ibuprofen Loaded Nano-transferosomal Gel for the Treatment of Psoriasis

2019 ◽  
pp. 1-8
Author(s):  
Marwa H. Abdallah ◽  
Amr S. Abu Lila ◽  
Md. Khalid Anwer ◽  
El-Sayed Khafagy ◽  
Muqtader Mohammad ◽  
...  
Keyword(s):  
Drug Release ◽  
Zeta Potential ◽  
Drug Loading ◽  
Entrapment Efficiency ◽  
Tween 80 ◽  
Formulation Development ◽  
In Vitro Drug Release ◽  
Vesicle Size

The present work was aimed to develop a transferosomal gel of ibuprofen (IBU) for the amelioration of psoriasis like inflammation. Three formulation of IBU loaded transferosomes (TFs1-TFs3) were prepared using different proportions of lipid (phospholipon 90H) and surfactant (tween 80) and further evaluated for vesicle size, zeta potential (ZP), entrapment efficiency and in vitro drug release. The IBU loaded transferosomes (TFs2) was optimized with vesicle size (217±8.4 nm), PDI (0.102), ZP (-31.5±4.3 mV), entrapment efficiency (88.4±6.9%) and drug loading (44.2±2.9%). Further, the optimized IBU loaded transferosomes (TFs2) was incorporated into 1% carbopol 934 gel base and characterized for homogeneity, extrudability, viscosity and drug content. The in vivo pharmacodynamic study of gel exhibited reduction in psoriasis like inflammation in mice. The ibuprofen loaded transferosomal gel was successfully developed and has shown the potential to be a new therapy against psoriasis like inflammation.

Sign in / Sign up

Export Citation Format

Share Document