Cost and embodied carbon reductions in cutter soil mix walls through fibre reinforcement

2017 ◽  
pp. 1-13 ◽  
Author(s):  
A. R. Russell ◽  
M. Chapman ◽  
S. H. Teh ◽  
T. Wiedmann
Keyword(s):  
Fibre Reinforcement ◽  
Embodied Carbon ◽  
Soil Mix

Structural performance of steel fibre reinforced concrete — Part IV. Toughness properties

2014 ◽  
Vol 5 (2) ◽  
pp. 119-125
Author(s):  
I. Kovács
Keyword(s):  
Reinforced Concrete ◽  
Steel Fibre ◽  
Fibre Orientation ◽  
Reinforced Concrete Beams ◽  
Fibre Reinforcement ◽  
Fibre Reinforced Concrete ◽  
Flexural Toughness ◽  
Steel Fibre Reinforced Concrete ◽  
Set Up ◽  
Flexural Tests

The present paper of a series deals with the experimental characterisation of flexural toughness properties of structural concrete containing different volume of hooked-end steel fibre reinforcement (75 kg/m3, 150 kg/m3). Third-point flexural tests were carried out on steel fibre reinforced concrete beams having a cross-section of 80 mm × 85 mm with the span of 765 mm, hence the shear span to depth ratio was 3. Beams were sawn out of steel fibre reinforced slab elements (see Part I) in order to take into consideration the introduced privilege fibre orientation (I and II) and the position of the beam (Ba-a, Ba-b, Ba-c) before sawing (see Part I). Flexural toughness properties were determined considering different standard specifications, namely the method of the ASTM (American Standards for Testing Materials), the process of the JSCE (Japan Society of Civil Engineering), and the final proposal of Banthia and Trottier for the post cracking strength. Consequently, behaviour of steel fibre reinforced concrete was examined in bending taking into consideration different experimental parameters such as fibre content, concrete mix proportions, fibre orientation, positions of test specimens in the formwork, while experimental constants were the size of specimens, the type of fibre used and the test set-up and test arrangement.

Bending Strength of Steel Fibre Reinforced Concrete Ribbed Slab Panel

2018 ◽  
Vol 15 (1) ◽  
pp. 15
Author(s):  
AMIR SYAFIQ SAMSUDIN ◽  
MOHD HISBANY MOHD HASHIM ◽  
SITI HAWA HAMZAH ◽  
AFIDAH ABU BAKAR
Keyword(s):  
Reinforced Concrete ◽  
Bending Strength ◽  
Steel Fibre ◽  
Concrete Slab ◽  
Future Application ◽  
Fibre Reinforcement ◽  
Fibre Reinforced Concrete ◽  
Conventional Concrete ◽  
Steel Fibre Reinforced Concrete ◽  
Bending Load

Nowadays, demands in the application of fibre in concrete increase gradually as an engineering material. Rapid cost increment of material causes the increase in demand of new technology that provides safe, efficient and economical design for the present and future application. The introduction of ribbed slab reduces concrete materials and thus the cost, but the strength of the structure also reduces due to the reducing of material. Steel fibre reinforced concrete (SFRC) has the ability to maintain a part of its tensile strength prior to crack in order to resist more loading compared to conventional concrete. Meanwhile, the ribbed slab can help in material reduction. This research investigated on the bending strength of 2-ribbed and 3-ribbed concrete slab with steel fibre reinforcement under static loading with a span of 1500 mm and 1000 mm x 75 mm in cross section. An amount of 40 kg/m steel fibre of all total concrete volume was used as reinforcement instead of conventional bars with concrete grade 30 N/mm2. The slab was tested under three-point bending. Load versus deflection curve was plotted to illustrate the result and to compare the deflection between control and ribbed slab. This research shows that SFRC Ribbed Slab capable to withstand the same amount of load as normal slab structure, although the concrete volume reduces up to 20%.

Influence of Solution Treatment, Sr-Modification and Short Fibre Reinforcement on the Eutectic Morphology of Al-Si Alloys

2006 ◽  
Vol 43 (10) ◽  
pp. 505-519 ◽  
Author(s):  
Fernando Adrián Lasagni ◽  
Hans Peter Degischer ◽  
Maria Papakyriacou
Keyword(s):  
Solution Treatment ◽  
Short Fibre ◽  
Fibre Reinforcement ◽  
Sr Modification ◽  
Eutectic Morphology

scholarly journals Embodied Carbon as a Material Selection Criterion: Insights from Sri Lankan Construction Sector

2021 ◽  
Vol 13 (4) ◽  
pp. 2202
Author(s):  
Amalka Nawarathna ◽  
Muditha Siriwardana ◽  
Zaid Alwan
Keyword(s):  
Sri Lanka ◽  
Construction Projects ◽  
Material Selection ◽  
Selection Criterion ◽  
Green Building ◽  
Vital Role ◽  
Low Carbon ◽  
Rating Systems ◽  
Embodied Carbon ◽  
The Government

The choice of materials is crucial in responding to the increasing embodied carbon (EC) impacts of buildings. Building professionals involved in material selection for construction projects have a vital role to play in this regard. This paper aimed to explore the extent to which building professionals in Sri Lanka considered EC as a material selection criterion. A questionnaire survey was conducted among a sample of building professionals in Sri Lanka. The results indicated that the consideration of EC as a material selection criterion remained low among key professionals, such as architects, engineers, and sustainability managers, despite their reasonable influencing powers and knowledge of EC. Those respondents who had considered EC as a selection criterion said they had been primarily driven by green building rating systems and previous experience. Those respondents who had not considered EC during material selection commonly reported that they had been prevented from doing so by the lack of regulations and the lack of alternative low carbon materials. Respondents believed that the involvement of actors, such as the government, professional bodies, environmental organizations, activist groups, and the public, may be significant in promoting the greater consideration of EC during material selection.

scholarly journals Long-fibre reinforced polymer composites by 3D printing: influence of nature of reinforcement and processing parameters on mechanical performance

2020 ◽  
Vol 1 (1) ◽  
Author(s):  
Francis Dantas ◽  
Kevin Couling ◽  
Gregory J. Gibbons
Keyword(s):  
Carbon Fibre ◽  
Polymer Composites ◽  
Mechanical Performance ◽  
Flexural Modulus ◽  
Matrix Material ◽  
Processing Parameters ◽  
Fibre Reinforcement ◽  
Reinforced Polymer ◽  
Unreinforced Material ◽  
Fibre Reinforced Polymer

Abstract The aim of this study was to identify the effect of material type (matrix and reinforcement) and process parameters, on the mechanical properties of 3D Printed long-fibre reinforced polymer composites manufactured using a commercial 3D Printer (Mark Two). The effect of matrix material (Onyx or polyamide), reinforcement type (Carbon, Kevlar®, and HSHT glass), volume of reinforcement, and reinforcement lay-up orientation on both Ultimate Tensile Strength (UTS) and Flexural Modulus were investigated. For Onyx, carbon fibre reinforcement offered the largest increase in both UTS and Flexural Modulus over unreinforced material (1228 ± 19% and 1114 ± 6% respectively). Kevlar® and HSHT also provided improvements but these were less significant. Similarly, for Nylon, the UTS and Flexural Modulus were increased by 1431 ± 56% and 1924 ± 5% by the addition of carbon fibre reinforcement. Statistical analysis indicated that changing the number of layers of reinforcement had the largest impact on both UTS and Flexural Strength, and all parameters were statistically significant.

Sign in / Sign up

Export Citation Format

Share Document