scholarly journals Evaluation of different methodologies for the design of the wellfield in shallow geothermal systems

2021 ◽  
Author(s):  
Cristina Sáez-Blázquez ◽  
Ignacio Martín-Nieto ◽  
Arturo Farfán-Martín ◽  
Diego González-Aguilera
Keyword(s):  
Optimal Solution ◽  
Geothermal Systems ◽  
Single Family ◽  
Geothermal Resources ◽  
Simple Method ◽  
Carrier Fluid ◽  
Ground Source ◽  
Accurate Design ◽  
Fluid Behaviour

Low enthalpy geothermal resources play an essential role in climate change mitigation. When ensuring the correct future operation of ground-source heat pump systems, an accurate design is mandatory. In this sense, different methodologies can be implemented. Although using sophisticated software constitutes the most optimal solution, its implementation is sometimes inviable in certain projects (the increase of the initial investment required is not justified in small plants). This work is focused on evaluating and comparing procedures used in the design of shallow geothermal systems. Thus, the research includes a simple method based on manual calculations, the Climasoft free application, Earth Energy Designer (EED) software, and the new geothermal tool GES-CAL developed by researchers from the TIDOP Research Group (University of Salamanca). The objective is to evaluate this new software and compare the results of all the detailed methodologies. This comparison derives from applying these tools in the calculation of the same case study (a single-family house placed in Ávila, Spain). Results show that the easiest methods involve oversized well-field schemas that also mean higher initial investments. Regarding GES-CAL, it is considered an accurate and valid alternative for the design of all heat exchanger configurations, especially for those installations placed in the region of Ávila. However, EED is recommended to calculate high-power geothermal systems that require an exhaustive analysis of the ground and the heat carrier fluid behaviour.

scholarly journals A Methodology for Assessing the Favourability of Geopressured-Geothermal Systems in Sedimentary Basin Plays: A Case Study in Abruzzo (Italy)

Geofluids ◽  
2019 ◽  
Vol 2019 ◽  
pp. 1-28 ◽  
Author(s):  
Alessandro Santilano ◽  
Eugenio Trumpy ◽  
Gianluca Gola ◽  
Assunta Donato ◽  
Davide Scrocca ◽  
...  
Keyword(s):  
Dynamic Models ◽  
Sedimentary Basin ◽  
Fluid Dynamic ◽  
Regional Scale ◽  
Central Italy ◽  
Analytical Framework ◽  
Geothermal Systems ◽  
Geothermal Resources ◽  
Unconventional Resource

We exploit the concept of the geothermal favourability, widely used for hydrothermal and EGS systems, to present an innovative methodology for assessing geopressured-geothermal resources occurring in terrigenous units in sedimentary basin plays. Geopressured-geothermal systems are an unconventional resource for power trigeneration exploiting three forms of energy from hydrocarbons, hydrothermal fluids, and well-head overpressure. This paper is intended to be a practical analytical framework for the systematic integration of the relevant data required to assess geopressured-geothermal resources. For this purpose, innovative parameters were also implemented in the methodology. The final result is the favourability map for identifying prospective areas to be further investigated for the appraisal of the geopressured-geothermal potential. We applied our methodology to the foredeep-foreland domains of the Apennines thrust belt in the Abruzzo region (central Italy). We analysed hundreds of deep hydrocarbon wells in order to create 3D geological and thermo-fluid dynamic models at a regional scale as well as to obtain information on the pressure regimes and on the chemistry of the system. The final favourability map for the Abruzzo case study is a first attempt at ranking these kinds of unconventional geothermal resources in a region that has been historically explored and exploited mostly for hydrocarbons.

The Tradition of Religious Books (Kitabs) Printing: Case Study of the Production and Reproduction of Religious Books (Kitabs) in Cianjur and Sukabumi, West Java, Indonesia

2020 ◽  
Vol 17 (2) ◽  
pp. 291-320
Author(s):  
Asep Saefullah
Keyword(s):  
Data Collection ◽  
Screen Printing ◽  
The Other ◽  
West Java ◽  
Simple Method ◽  
Original Essays ◽  
Printed Books ◽  
Religious Books ◽  
Living Tradition

Tulisan ini membahas fenomena penyebaran kitab-kitab cetak keaga­maan di Jawa Barat, khususnya di Sukabumi dan Cianjur. Jenis kitab ini biasanya menggunakan tulisan Arab dengan bahasa Sunda dan menggu­nakan aksara Pegon. Kitab-kitab cetak dari jenis-jenis itu diproduksi dan direproduksi, dan masih digunakan sampai hari ini. Oleh karena itu, fenomena ini dapat disebut sebagai “living tradition”. Pengumpulan data dilakukan dengan melacak dan merekam kitab-kitab yang diproduksi (disalin atau dikarang) dan direproduksi (dicetak atau digandakan) dengan metode seder­hana, yakni fotocopi dan pencetakan tradisional seperti stensil, sablon, dan "cetak toko". Tulisan ini bertujuan untuk memetakan dan merevisi kategorisasi kitab-kitab tersebut dari kajian terdahulu berdasarkan jenis karya, seperti karangan asli, tuqilan, terjemahan, syarḥ (penjelasan), khulasah (ringkasan) yang lain, dan juga berdasarkan bahasa dan aksara yang digunakan. Selain itu, tulisan ini juga mengamati lembaga-lembaga atau individu-individu yang masih mereproduksi buku-buku (kitab-kitab) keagamaan sederhana seperti perusahaan percetakan atau pesantren yang menerbitkan kitab-kitab tersebut. Pada akhir artikel ini, ada beberapa saran dalam upaya untuk melestarikan kitab-kitab cetak dan karya-karya tersebut.Kata kunci: kitab, jenis karya, pencetakan tradisional, Sunda, Pegon, Jawa Barat This paper discusses the phenomenon of the spreading of religious printed books (kitabs) in West Java, especially in Sukabumi and Cianjur, which are characterized by the use of Arabic writing in Sundanese (or known as Pegon script). The printed books (Kitabs) of those types are produced and reproduced, and are still used to this day. Therefore, this phenomenon can be called as a “living tradition”. Data collection was conducted by tracing and recording religious books (kitabs) that are pro-duced (rewritten or compossed) and reproduced (printed or duplicated) with a simple method, known as photocopying and traditional printing such as stencils, screen printing, and “shop printing”. This paper aims to map and revise the categorization of these Kitabs from previous studies based on the types of works including original essays, tuqilan (quotations), translation, sharh (explanation), khulaṣah (summary), or the other, and also based on the language and the script used. In addition, this paper also observes the institutions or individuals that are still reproducing these printed religious books such as the printing company or pesantren that publish such kitabs. At the end of this article, there are some suggestions in attempts to preserve those printed kitabs and the works.Keywords: Kitabs, type of work, traditional printing, Sunda, Pegon, West Java

scholarly journals The contribution of the geothermal resources to local employment: Case study from Poland

2021 ◽  
Vol 7 ◽  
pp. 1190-1202
Author(s):  
Katarzyna A. Kurek ◽  
Wim Heijman ◽  
Johan van Ophem ◽  
Stanisław Gędek ◽  
Jacek Strojny
Keyword(s):  
Geothermal Resources ◽  
Local Employment

scholarly journals Modular Web Portal Approach for Stimulating Home Renovation: Lessons from Local Authority Developments

Energies ◽  
2021 ◽  
Vol 14 (5) ◽  
pp. 1270
Author(s):  
Minyoung Kwon ◽  
Erwin Mlecnik
Keyword(s):  
Digital Media ◽  
Local Authority ◽  
Case Study Research ◽  
Management Plan ◽  
Web Portals ◽  
Single Family ◽  
Web Portal ◽  
Local Authorities ◽  
Neutral Information

Web portals have the potential to promote sustainable environmental ideas due to the capacity of digital media, such as easy accessibility, openness, and networking. Local authorities (LAs) are responsible for activating carbon savings in homes, and they are key actors when it comes to providing neutral information to their citizens. Local authority web portals may thus create environmental awareness, particularly regarding owner-occupied single-family home renovation. Nevertheless, the experiences of LAs developing web portals have rarely been studied. Therefore, this paper analyses the development process of various LA web modules and investigates how LAs foster modular web portals to stimulate the adoption of home renovation with parameters to assess LAs’ actions in terms of the management of web-modules development. A homeowner renovation journey model is applied to map current local authority developments. Case study research and interviews were done to analyse and evaluate the adoption of modular web portals developed and tested by six local authorities in four countries in Europe. Based on the development and use of the modular web portal, lessons have been derived emphasising the importance of co-creation, integrating with offline activities, and a strategic management plan.

scholarly journals Profitability of Various Energy Supply Systems in Light of Their Different Energy Prices and Climate Conditions

Buildings ◽  
2020 ◽  
Vol 10 (6) ◽  
pp. 100 ◽  
Author(s):  
Elaheh Jalilzadehazhari ◽  
Georgios Pardalis ◽  
Amir Vadiee
Keyword(s):  
Renewable Energy ◽  
Heat Pump ◽  
Energy Supply ◽  
Ground Source Heat Pump ◽  
Energy Prices ◽  
Single Family ◽  
Climate Zones ◽  
Ground Source ◽  
Supply Systems ◽  
Energy Supply Systems

The majority of the single-family houses in Sweden are affected by deteriorations in building envelopes as well as heating, ventilation and air conditioning systems. These dwellings are, therefore, in need of extensive renovation, which provides an excellent opportunity to install renewable energy supply systems to reduce the total energy consumption. The high investment costs of the renewable energy supply systems were previously distinguished as the main barrier in the installation of these systems in Sweden. House-owners should, therefore, compare the profitability of the energy supply systems and select the one, which will allow them to reduce their operational costs. This study analyses the profitability of a ground source heat pump, photovoltaic solar panels and an integrated ground source heat pump with a photovoltaic system, as three energy supply systems for a single-family house in Sweden. The profitability of the supply systems was analysed by calculating the payback period (PBP) and internal rate of return (IRR) for these systems. Three different energy prices, three different interest rates, and two different lifespans were considered when calculating the IRR and PBP. In addition, the profitability of the supply systems was analysed for four Swedish climate zones. The analyses of results show that the ground source heat pump system was the most profitable energy supply system since it provided a short PBP and high IRR in all climate zones when compared with the other energy supply systems. Additionally, results show that increasing the energy price improved the profitability of the supply systems in all climate zones.

Probabilistic nature of storage delay parameter of the hydrologic model RORB: a case study for the Cooper's Creek catchment in Australia

2014 ◽  
Vol 46 (3) ◽  
pp. 400-410 ◽  
Author(s):  
Hitesh Patel ◽  
Ataur Rahman
Keyword(s):  
Hydrologic Model ◽  
Exceedance Probability ◽  
Design Flood ◽  
Flood Peak ◽  
Monte Carlo Simulation Technique ◽  
South Wales ◽  
Accurate Design ◽  
High Degree ◽  
Probabilistic Nature

In rainfall–runoff modeling, Design Event Approach is widely adopted in practice, which assumes that the rainfall depth of a given annual exceedance probability (AEP), can be converted to a flood peak of the same AEP by assuming a representative fixed value for the other model inputs/parameters such as temporal pattern, losses and storage-delay parameter of the runoff routing model. This paper presents a case study which applies Monte Carlo simulation technique (MCST) to assess the probabilistic nature of the storage delay parameter (kc) of the RORB model for the Cooper's Creek catchment in New South Wales, Australia. It has been found that the values of kc exhibit a high degree of variability, and different sets of plausible values of kc result in quite different flood peak estimates. It has been shown that a stochastic kc in the MCST provides more accurate design flood estimates than a fixed representative value of kc. The method presented in this study can be adapted to other catchments/countries to derive more accurate design flood estimates, in particular for important flood study projects, which require a sensitivity analysis to investigate the impacts of parameter uncertainty on design flood estimates.

scholarly journals Multi-objective optimization of ORC geothermal conversion system integrated with life cycle assessment

2018 ◽  
Vol 70 ◽  
pp. 01012
Author(s):  
Dominika Matuszewska ◽  
Marta Kuta ◽  
Jan Górski
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Organic Rankine Cycle ◽  
Rankine Cycle ◽  
Geothermal System ◽  
Geothermal Systems ◽  
Multi Objective Optimization ◽  
Geothermal Resources ◽  
Multi Objective ◽  
Conversion Technology

This paper details the development of a systematic methodology to integrated life cycle assessment (LCA) with thermo-economic models and to thereby identify the optimal exploitation schemes of geothermal resources. Overall geothermal systems consist of a superstructure of geothermal exploitable resources, a superstructure of conversion technology and multiple demand profiles for Swiss city. In this paper, an enhanced geothermal system has been chosen as exploitable resources. The energy conversion technology used in modelling is an organic Rankine cycle, which can be used to supply heat and electricity. In the Swiss case four demand profiles periods are considered: summer, interseason, winter and extreme winter, the city Nyon serving for the example case study. The multi-objective optimization system, that uses an evolutionary algorithm, is employed to determine the optimal scheme for some of the prepared models, with exergy efficiency and environmental impact as objectives.

Identification and prioritization of farmers' innovations in northern Ghana

2014 ◽  
Vol 30 (6) ◽  
pp. 537-549 ◽  
Author(s):  
Justice A. Tambo ◽  
Tobias Wünscher
Keyword(s):  
Smallholder Farmers ◽  
Household Survey ◽  
Northern Ghana ◽  
Plant Residues ◽  
Simple Method ◽  
Pests And Diseases ◽  
Innovation Contest ◽  
Scientific Validation ◽  
Livestock Diseases

AbstractFarmers are innovators and experimenters and not just adopters of introduced technologies. The innovations developed by farmers could complement the highly promoted externally driven technologies in addressing the numerous challenges facing agriculture. The aim of this paper was to identify outstanding innovations developed by smallholder farmers in northern Ghana, and prioritize the high potential ones for further scientific validation or dissemination. Using an innovation contest that rewards farmers' creativity, we identified 29 promising innovations. Additionally, 19 innovations were scouted through a household survey. The innovations are largely extensive modifications of existing practices or combinations of different known practices in unique ways to save costs or to address crop and livestock production constraints. While some of the identified innovations can be recommended or disseminated to other farmers, most of them may require further validation or research. However, validating all of these innovations will be very expensive and time-consuming. We propose the multi-criteria decision-making analysis (MCDM) as a simple method to prioritize farmers' innovations. Using this method, we find that among the most promising innovations are those involving the control of weeds, pests and diseases using plant residues and extracts, and the treatment of livestock diseases using ethnoveterinary medicines. We briefly explain the six most highly ranked innovations. This case study from northern Ghana provides further proof that smallholder farmers develop diverse and spectacular innovations to address the myriad challenges they face, and these need to be recognized and promoted. We also conclude that contest and MCDM are useful methods that can be applied in unearthing and prioritizing farmer innovations, respectively.

scholarly journals Location Routing Problem with Consideration of CO2 Emissions Cost: A Case Study

2020 ◽  
Vol 21 (2) ◽  
pp. 225-234
Author(s):  
Ananda Noor Sholichah ◽  
Y Yuniaristanto ◽  
I Wayan Suletra
Keyword(s):  
Co2 Emissions ◽  
Time Windows ◽  
Optimal Solution ◽  
Mixed Integer ◽  
Distribution Centers ◽  
Location Routing Problem ◽  
Routing Problem ◽  
Location Routing ◽  
Study Results

Location and routing are the main critical problems investigated in a logistic. Location-Routing Problem (LRP) involves determining the location of facilities and vehicle routes to supply customer's demands. Determination of depots as distribution centers is one of the problems in LRP.  In LRP, carbon emissions need to be considered because these problems cause global warming and climate change. In this paper, a new mathematical model for LRP considering CO2 emissions minimization is proposed. This study developed a new  Mixed Integer Linear Programming (MILP)  model for LRP with time windows and considered the environmental impacts.  Finally, a case study was conducted in the province of Central Java, Indonesia. In this case study, there are three depot candidates. The study results indicated that using this method in existing conditions and constraints provides a more optimal solution than the company's actual route. A sensitivity analysis was also carried out in this case study.

Sign in / Sign up

Export Citation Format

Share Document