scholarly journals INNOVATIVE SOLUTION FOR LEO-SYSTEM WITH DISTRIBUTED SATELLITE ARCHITECTURE

2020 ◽  
pp. 77-83
Author(s):  
Volodymyr Saiko ◽  
Teodor Narytnyk ◽  
Valeriy Gladkykh ◽  
Natalia Sivkova
Keyword(s):  
Communication Systems ◽  
High Speed ◽  
Satellite Communication ◽  
Fog Computing ◽  
Satellite Communications ◽  
Access Time ◽  
Artificial Satellites ◽  
Practical Implementation ◽  
Innovative Solution ◽  
Distributed Satellite

An innovative solution for practical implementation in a LEO system with a "distributed satellite" architecture that can be used to provide low-orbital spacecraft communications with ground stations and users of 5G / IoT satellite services is proposed. The essence of the proposed development in the system of low-orbital satellite communication with FC-architecture is that to reduce the delay in signaling to consumers and the probability of overloading the network into a prospective system of low-orbital satellite communication, which contains artificial Earth satellites, each of which functions in Earth orbit and equipped with onboard repeaters, inter-satellite communications, a network of ground-based communication and control systems for artificial satellites of the Earth, a grouping of low-orbiting space their devices (LEO-system), which includes the grouping of root (leading) satellites and satellites-repeaters (slave), around each root satellite is formed micro-grouping of satellites-repeaters, and functions of the root satellite in the selected orbital phase of the orbital -or micro-satellites that are connected to the annular network by communication lines between satellites, and - functions of satellites-repeaters - kubsat, new is the introduction of a multilevel boundary cloud system, which is a heterogeneity distributed computing cloud structure. At the same time, the boundary clouds of the multilevel system are connected by ultra-high-speed wireless terahertz radio lines and wireless optical communication systems. The technique of estimation of access time in the proposed structure of "fog computing" on the basis of the model of access in "fog computing" with the resolution of collisions of data sources implementing the survey mode is presented.

INNOVATIVE METHOD OF SATELLITE COMMUNICATION

2019 ◽  
Author(s):  
Teodor Narytnik ◽  
Vladimir Saiko
Keyword(s):  
Communication Systems ◽  
High Speed ◽  
Satellite Communication ◽  
Radio Channel ◽  
Satellite Communications ◽  
Service Area ◽  
Satellite Systems ◽  
Orbit Satellite ◽  
Geometric Size ◽  
Distributed Satellite

The technical aspects of the main promising projects in the segments of medium and low-orbit satellite communication systems are considered, as well as the project of the domestic low-orbit information and telecommunications system using the terahertz range, which is based on the use of satellite platforms of the micro- and nanosatellite class and the distribution of functional blocks of complex satellite payloads more high-end on multiple functionally related satellites. The proposed system of low-orbit satellite communications represents the groupings of low-orbit spacecraft (LEO-system) with the architecture of a "distributed satellite", which include the groupings of the root (leading) satellites and satellite repeaters (slaves). Root satellites are interconnected in a ring network by high-speed links between the satellites. The geometric size of the “distributed satellite” is the area around the root satellite with a radius of about 1 km. The combination of beams, which are formed by the repeater satellites, make up the service area of the LEO system. The requirements for the integrated service area of the LEO system (geographical service area) determine the requirements for the number of distributed satellites in the system as a whole. In the proposed system to reduce mutual interference between the grouping of the root (leading) satellites and repeater satellites (slaves) and, accordingly, minimizing distortions of the information signal when implementing inter-satellite communication, this line (radio channel) was created in an unlicensed frequency (e.g., in the terahertz 140 GHz) range. In addition, it additionally allows you to minimize the size of the antennas of such a broadband channel and simplify the operation of these satellite systems.

scholarly journals Precoding With Received-Interference Power Control for Multibeam Satellite Communication Systems

2021 ◽  
Vol 2 ◽  
Author(s):  
Eva Lagunas ◽  
Ana Pérez-Neira ◽  
Marc Martínez ◽  
Miguel Angel Lagunas ◽  
Miguel Angel Vázquez ◽  
...  
Keyword(s):  
Communication Systems ◽  
Satellite Communication ◽  
Satellite Communications ◽  
Low Complexity ◽  
Limiting Factors ◽  
Practical Implementation ◽  
Interference Power ◽  
User Scheduling ◽  
Zero Forcing ◽  
The Matrix

Zero-Forcing (ZF) and Regularized Zero-Forcing (RZF) precoding are low-complexity sub-optimal solutions widely accepted in the satellite communications community to mitigate the resulting co-channel interference caused by aggressive frequency reuse. However, both are sensitive to the conditioning of the channel matrix, which can greatly reduce the achievable gains. This paper brings the attention to the benefits of a design that allows some residual received interference power at the co-channel users. The motivation behind this approach is to relax the dependence on the matrix inversion procedure involved in conventional precoding schemes. In particular, the proposed scheme aims to be less sensitive to the user scheduling, which is one of the key limiting factors for the practical implementation of precoding. Furthermore, the proposed technique can also cope with more users than satellite beams. In fact, the proposed precoder can be tuned to control the interference towards the co-channel beams, which is a desirable feature that is not met by the existing RZF solutions. The design is formulated as a non-convex optimization and we study various algorithms in order to obtain a practical solution. Supporting results based on numerical simulations show that the proposed precoding implementations are able to outperform the conventional ZF and RZF schemes.

Prospects for the Application of the Global High-speed, Low Latency Broadband Satellite Internet in the Field of Road Transport

2021 ◽  
pp. 254-264
Author(s):  
Anatoliy Soltus ◽  
◽  
Maksym Rud ◽  
Keyword(s):  
Antenna Arrays ◽  
Communication Systems ◽  
High Speed ◽  
Electromagnetic Compatibility ◽  
Emerging Market ◽  
Satellite Communications ◽  
Road Transport ◽  
Unmanned Vehicles ◽  
Low Latency ◽  
Current State

The article examines the problems of navigation and communication with the use of satellite technologies in road transport in the context of the growth of globalization processes in the world economy and the transformations of freight transport technologies caused by a large-scale transition to transport with zero emissions and the development of unmanned vehicles. The paper discusses the principles of building a global high-speed broadband satellite Internet with low latency. Potential capabilities of technologies such as digital antenna arrays and laser communication channels used in such systems are analyzed. Also considered are the existing and potential problems, both technical with electromagnetic compatibility with existing satellite communication systems and between systems under construction or planning, and legal caused by changes in the principles of information transfer at the interstate level. The main players in the emerging market of high-speed satellite communications are considered and the parameters of the systems declared by them are described. The comparison of the current state of building satellite constellations of individual projects is carried out and the ability to implement the announced plans by individual companies is analyzed. The disadvantages that create obstacles for the introduction of high-speed satellite communications in road transport at the moment and the directions of their overcoming are highlighted. Considering the potential of satellite Internet systems, the current state of construction, as well as existing technical and legal restrictions, the introduction of reliable satellite communications will significantly speed up the transition to autonomous unmanned vehicles. In this regard, the most successful opportunities for the new communication technology will be able to realize the transport companies, which will simultaneously update the fleet of vehicles towards zero emissions and with unmanned technologies.

MATHEMATICAL MODEL OF THE RADIATING APERTURE OF HEADLIGHTS CONSISTING OF SEGMENT-PARABOLIC ANTENNAS

2021 ◽  
pp. 69-78
Author(s):  
Ю.Г. Пастернак ◽  
В.А. Пендюрин ◽  
К.С. Сафонов
Keyword(s):  
Mathematical Model ◽  
Antenna Arrays ◽  
Communication Systems ◽  
High Speed ◽  
Satellite Communication ◽  
The Arctic ◽  
Northern Latitudes ◽  
Electronic Model ◽  
Mobile Satellite ◽  
High Orbit

Решение задачи связи в Арктике, а также в тундре, в тайге, в лесу, в море, на полях возможно только с использованием мобильных систем спутниковой связи. ФГУП «Космическая связь» (г. Москва) располагает группировкой спутников, которая постоянно расширяется. Для надежной связи в Арктике и в северных широтах, помимо геостационарных спутников, запущены спутники, движущиеся по высокоорбитальным траекториям. Для переключения со спутника на спутник, входящий в зону видимости абонента, необходимо использовать антенные решетки. Проблема заключается в том, что в настоящее время отсутствуют мобильные терминалы высокоскоростной спутниковой связи, а стоимость зарубежных аналогов препятствует широкому их использованию (достигает 50 тысяч долларов). Обычно радиолокационная связь (РЛС) с фазированной антенной решеткой используется для наблюдения за тысячами угловых точек, для отслеживания сотни целей. Такие требования могут быть выполнены только путем сканирования луча в пространстве в течение микросекунды. Ясно, что необходимо электронное управление лучом, поскольку механически вращать антенну не представляется возможным. Лишь некоторая часть вышеуказанных проблем будет затрагиваться в этой статье, ниже будут представлены электронная модель антенной решетки и её математическая модель The solution of the communication problem in the Arctic, as well as in the tundra, in the taiga, in the forest, in the sea, in the fields is possible only with the use of mobile satellite communication systems. FSUE "Space Communications" (Moscow) has a constantly expanding group of satellites. For reliable communication in the Arctic and Northern latitudes, in addition to geostationary satellites, satellites moving along high-orbit trajectories were launched. To switch from one satellite to the other included in the subscriber's visibility area, it is necessary to use antenna arrays. The problem is that currently there are no mobile terminals for high-speed satellite communication, and the cost of foreign analogues prevents their widespread use (up to 50 thousand dollars). Typically, a phased array radar is used to track thousands of corner points to track hundreds of targets. Such requirements can only be met by scanning the beam in space for a microsecond. It is clear, that electronic beam control is necessary since it is not possible to mechanically rotate the antenna. Only some of the above problems will be touched upon in this article. An electronic model of the antenna array and its mathematical model is presented

ON-BOARD DIGITAL SWITCHING OPTIONS FOR CIVIL COMMUNICATION SATELLITES

2020 ◽  
Author(s):  
О.В. МЕНТУС ◽  
А.А. АКОПОВ
Keyword(s):  
Communication Systems ◽  
Satellite Communication ◽  
Satellite Communications ◽  
Provision Of Services ◽  
Digital Switching ◽  
Switching Options

Рассматриваются варианты построения полезных нагрузок с цифровой коммутацией для спутниковой связи на примере перспективного космического аппарата «Экспресс-АМУ4». Показано, что использование цифровой коммутации в отечественных спутниках связи позволяет обеспечить гибкость оказания услуг и более успешно конкурировать с зарубежными спутниковыми системами связи. This article considers variants of digital switching payloads for satellite communications on the example of a promising spacecraft Express-AMU4. It is shown that the use of digital switching in domestic communication satellites allows providing flexibility in the provision of services and more successfully competing with foreign satellite communication systems.

scholarly journals RF-MEMS Monolithic K and Ka Band Multi-State Phase Shifters as Building Blocks for 5G and Internet of Things (IoT) Applications

Sensors ◽  
2020 ◽  
Vol 20 (9) ◽  
pp. 2612 ◽  
Author(s):  
Jacopo Iannacci ◽  
Giuseppe Resta ◽  
Alvise Bagolini ◽  
Flavio Giacomozzi ◽  
Elena Bochkova ◽  
...  
Keyword(s):  
Internet Of Things ◽  
Communication Systems ◽  
High Speed ◽  
Phase Shifter ◽  
Satellite Communication ◽  
Rf Mems ◽  
Building Blocks ◽  
Phase Shifters ◽  
Small Cells ◽  
Mems Technology

RF-MEMS, i.e., Micro-Electro-Mechanical Systems (MEMS) for Radio Frequency (RF) passive components, exhibit interesting characteristics for the upcoming 5G and Internet of Things (IoT) scenarios, in which reconfigurable broadband and frequency-agile devices, like high-order switching units, tunable filters, multi-state attenuators, and phase shifters will be necessary to enable mm-Wave services, small cells, and advanced beamforming. In particular, satellite communication systems providing high-speed Internet connectivity utilize the K and Ka bands, which offer larger bandwidth compared to lower frequencies. This paper focuses on two design concepts of multi-state phase shifter designed and manufactured in RF-MEMS technology. The networks feature 4 switchable stages (16 states) and are developed for the K and Ka bands. The proposed phase shifters are realized in a surface micromachining RF-MEMS technology and the experimentally measured parameters are compared with Finite Element Method (FEM) multi-physical electromechanical and RF simulations. The simulated phase shifts at both the operating bands fit well the measured value, despite the measured losses (S21) are larger than 5–7 dB if compared to simulations. However, such a non-ideality has a technological motivation that is explained in the paper and that will be fixed in the manufacturing of future devices.

A New Approach of Detection Algorithm for Reducing Computation Complexity of MIMO systems

2016 ◽  
Vol 1 (1) ◽  
pp. 159
Author(s):  
Mohammed Qasim Sulttan
Keyword(s):  
Communication Systems ◽  
High Speed ◽  
Mimo Systems ◽  
Symbol Error Rate ◽  
Detection Algorithm ◽  
Practical Implementation ◽  
High Complexity ◽  
Computation Complexity ◽  
Sphere Decoder ◽  
Manhattan Metric

<p>Multiple-Input Multiple-Output (MIMO) technique is a key technology to strengthen and achieve high-speed and high-throughput wireless communications. . In recent years, it was observed that frequent detecting techniques could improve the performance (e.g., symbol error rate ‘SER’) of different modern digital communication systems. But these systems faced a problem of high complexity for the practical implementation.  To solve the problem of high complexity, this work proposed Frequent Improve K-best Sphere Decoding (FIKSD) algorithm with stopping rule depending on the Manhattan metric. Manhattan metric is proposed to use with FIKSD in order to achieve the lowest complexity. FIKSD is a powerful tool to achieve a high performance close to the maximum likelihood (ML), with less complexity. The simulation results show a good reduction in computation complexity with a cost of slight performance degradation within 1dB; the proposed FIKSD requires 0% to 94% and 82% to 97% less complexity than Improved K-best Sphere Decoder (IKSD) and K-best Sphere Decoder (KSD) respectively. This makes the algorithm more suitable for implementation in wireless communication systems.</p>

scholarly journals Model of forming a spatial-temporary radio frequency portrait of subscriber terminals in satellite communication systems monitoring

2020 ◽  
Vol 100 (4) ◽  
pp. 78-86
Author(s):  
M. Baldychev ◽  
◽  
A. Bosyy ◽  
O. Galtseva ◽  
Keyword(s):  
Radio Frequency ◽  
Software Defined Radio ◽  
Communication Systems ◽  
Satellite Communication ◽  
A Priori ◽  
Complex Structure ◽  
Satellite Communications ◽  
Physical Parameters ◽  
Time Frequency ◽  
Spatio Temporal

Currently, the development of satellite communications systems (SCS) is associated with the development of signals of complex structure. The popularization and distribution of software-defined radio systems (Software-defined radio, SDR) are noted, which leads to a decrease of quality of functioning of the SCS. Promising areas of countering the unauthorized use of the time-frequency resource of the KA repeater are methods aimed at determining the location of subscriber terminals (ST) and analyzing the service and semantic parts of the transmitted message. Accounting for changes of physical parameters requires the use of a large amount of heterogeneous a priori data; it is not achievable task in practice. According to the theory of mathematical statistics, the approximation is used at solving problems of sample analysis. The result of the approximation is a spatio-temporal radio-frequency portrait (STRFP) of an ST participating in the formation of a group signal. Thus, the aim of the research is to develop a model of changing the physical parameters of a radio signal and to study the possibility of approximating physical parameters in order to form a spatio-temporal radiofrequency portrait of an ST SCS.

scholarly journals Carrierless amplitude and phase modulation in wireless visible light communication systems

2020 ◽  
Vol 378 (2169) ◽  
pp. 20190181 ◽  
Author(s):  
N. Bamiedakis ◽  
R. V. Penty ◽  
I. H. White
Keyword(s):  
Visible Light ◽  
Communication Systems ◽  
High Speed ◽  
Low Cost ◽  
Visible Light Communication ◽  
Practical Implementation ◽  
Visible Light Communications ◽  
Modulation Formats ◽  
Spectrally Efficient ◽  
Basic Features

Visible light communications (VLCs) have attracted considerable interest in recent years owing to the potential to simultaneously achieve data transmission and illumination using low-cost light-emitting diodes (LEDs). However, the high-speed capability of such links is typically limited by the low bandwidth of LEDs. As a result, spectrally efficient advanced modulation formats have been considered for use in VLC links in order to mitigate this issue and enable higher data rates. Carrierless amplitude and phase (CAP) modulation is one such spectrally efficient scheme that has attracted significant interest in recent years owing to its good potential and practical implementation. In this paper, we introduce the basic features of CAP modulation and review its use in the context of indoor VLC systems. We describe some of its attributes and inherent limitations, present related advances aiming to improve its performance and potential and report on recent experimental demonstrations of LED-based VLC links employing CAP modulation. This article is part of the theme issue ‘Optical wireless communication’.

Sign in / Sign up

Export Citation Format

Share Document