scholarly journals SOFTWARE COMPLEX FOR PARTS RECOGNITION AS THE BASIS OF EDUCATIONAL LABORATORY WORK

2021 ◽  
Vol 5 ◽  
pp. 459-469
Author(s):  
Alex Samarkin ◽  
Elena Samarkina ◽  
Vladimir Belov
Keyword(s):  
Pattern Recognition ◽  
Data Processing ◽  
Dissimilar Materials ◽  
Digital Technologies ◽  
Laboratory Work ◽  
State University ◽  
Automated Assembly ◽  
Software Complex ◽  
Flexible Assembly

The article discusses the scientific and methodological foundations of laboratory work in vision systems using the author's algorithms for pattern recognition. The results were used to prepare masters of technical specialties at the Pskov State University. Another approach to using digital technologies for processing images of the working area is proposed. Some aspects of solving problems of identification of parts, determination of their location, control in automated assembly is described. The hardware-software complex in the article performs data processing and measurements in parallel with the flow of the technological process. The hardware and software complex expands the capabilities of flexible assembly platforms when assembling parts with different mass-inertial characteristics due to the geometric shape and dissimilar materials.

AN AUTO-PICKING STACKING VELOCITY ALGORITHM BASED ON AN AI AND PR APPROACH

1989 ◽  
Vol 03 (01) ◽  
pp. 103-111
Author(s):  
L. WU ◽  
Z. LUO ◽  
J. ZHOU ◽  
H. WANG
Keyword(s):  
Artificial Intelligence ◽  
Pattern Recognition ◽  
Data Processing ◽  
Seismic Data ◽  
Seismic Data Processing ◽  
Pattern Recognition Techniques ◽  
Automatic Algorithm

Stacking velocity is a very important parameter in seismic data processing. Until now the determination of stacking velocity has been done manually. This article proposes an automatic algorithm for picking stacking velocity. The algorithm uses artificial intelligence and pattern recognition techniques.

METHOD FOR ESTIMATING ERRORS IN MEASURING INSTRUMENTS BY THE SPACE CATALOGUE ORBITS

2018 ◽  
pp. 76-84
Author(s):  
K. V. Sorokin ◽  
E. A. Sunarchina
Keyword(s):  
Dynamic Model ◽  
New Method ◽  
Measuring Instruments ◽  
Measuring Instrument ◽  
Software Complex

Improvement of orbits precision is one of the most important tasks of space surveillance catalogue maintenance. The solution of this problem is directly related to an adequate consideration of the errors of the coordinate information from the measuring instruments. The article consideresd a new method for estimating the precision of measuring instruments on the catalog orbits. To carry out such analysis, in PJSC «VIMPEL» special technological program was created. Main results of a study of radar errors with orbits of space surveillance catalogue was presented. Also, the results were compared with data of measuring instrument's calibration software complex. This software complex provides determination of satellite's position with errors less than 10 m. A new dynamic model of measuring instrument errors is proposed.

scholarly journals A design concept of active cooling for tailored forming workpieces during induction heating

2021 ◽  
Vol 15 (2) ◽  
pp. 177-186
Author(s):  
Caner-Veli Ince ◽  
Anna Chugreeva ◽  
Christoph Böhm ◽  
Fadi Aldakheel ◽  
Johanna Uhe ◽  
...  
Keyword(s):  
Dissimilar Materials ◽  
Heating Process ◽  
Algorithmic Approach ◽  
Cooling Strategy ◽  
Heating And Cooling ◽  
Temperature Constraint ◽  
Inhomogeneous Temperature ◽  
Specific Temperature ◽  
Tailored Forming

AbstractThe demand for lightweight construction is constantly increasing. One approach to meet this challenge is the development of hybrid components made of dissimilar materials. The use of the hybrid construction method for bulk components has a high potential for weight reduction and increased functionality. However, forming workpieces consisting of dissimilar materials requires specific temperature profiles for achieving sufficient formability. This paper deals with the development of a specific heating and cooling strategy to generate an inhomogeneous temperature distribution in hybrid workpieces. Firstly, the heating process boundaries with regard to temperature parameters required for a successful forming are experimentally defined. Secondly, a design based on the obtained cooling strategy is developed. Next a modelling embedded within an electro-thermal framework provides the basis for a numerical determination of admissible cooling rates to fulfil the temperature constraint. Here, the authors illustrate an algorithmic approach for the optimisation of cooling parameters towards an effective minimum, required for applicable forming processes of tailored forming.

scholarly journals Determination of the region of the limiting states occurrence in RVS-20000 with the subsidence of the external bottom contour

2018 ◽  
Vol 239 ◽  
pp. 06002
Author(s):  
P.V. Chepur ◽  
A.A. Tarasenko ◽  
A.A. Gruchenkova
Keyword(s):  
Technical Condition ◽  
Element Analysis ◽  
Metal Structures ◽  
Software Complex ◽  
Managerial Decisions ◽  
The Finite Element Analysis ◽  
Steel Tank ◽  
Intrinsic Stiffness ◽  
Bottom Contour

The problem of the limiting states occurrence in the structures of a vertical steel tank is investigated in this work. To study the SSS of the metal structures of the object, the authors created a numerical model of the RVS-20000 tank in the ANSYS software complex. The model considers the maximum number of elements with their geometry and connections affecting the tank SSS under non-axisymmetric loading, including beyond the elasticity of steel. Dependences between the parameters of intrinsic stiffness of the VST are obtained. The results of the finite element analysis made it possible to develop a technique for assessing the technical condition of the structure with the development of irregular subsidence of the external bottom contour. The proposed technique can be used by both operating and design organizations in making managerial decisions regarding the repair of RVS-20000 subjected to the base subsidence.

DIGITAL ZENITH CAMERA FOR VERTICAL DEFLECTION DETERMINATION

2012 ◽  
Vol 38 (4) ◽  
pp. 123-129 ◽  
Author(s):  
Māris Abele ◽  
Jānis Balodis ◽  
Inese Janpaule ◽  
Ieva Lasmane ◽  
Augusts Rubans ◽  
...  
Keyword(s):  
Data Processing ◽  
Digital Imaging ◽  
High Accuracy ◽  
Reference Star ◽  
Research Groups ◽  
Vertical Deflection ◽  
Digital Imaging Technology ◽  
Prototype Instrument ◽  
Automated Determination

Recent accomplishments in advancement of accurate astrometric reference star catalogues, development of digital imaging technology, high accuracy tiltmeter technology, and geocentric coordinate availability provided by GNSS, have made possible accurate, fast and automated determination of vertical deflections using astrometric methods. Zenith cameras for this kind of measurements have been developed or are being developed by several research groups. The paper describes a research project by Institute of Geodesy and Geoinformation, intended to design a portable digital zenith camera for vertical deflection determination with 0.1” expected accuracy. Camera components are described, proposed data processing algorithm and preliminary results, obtained with prototype instrument, are presented.

Sign in / Sign up

Export Citation Format

Share Document