scholarly journals The Principle of Mirror Reflection and the Ways of Manifesting the Transcendent in Tarkovsky’s The Mirror

2017 ◽  
Vol 9 (1) ◽  
pp. 76-88
Author(s):  
Lyudmila B Klyueva
Keyword(s):  
Film Structure ◽  
Mirror Reflection ◽  
Text Base

The article is devoted to the research of the directors strategy of A.Tarkovsky in his film The Mirror analyzed through the mirror references principle as a structure-forming text base. The film structure is viewed as a film of projections. The main aim of the article is to single out means of mirror reflections and technologies of creating mirror references that give birth to a unique film structure.

The effect of an aluminum heat-sink layer on the laser-induced amorphization of SiOx/TeGeSn/SiOx phase-change recording films

1989 ◽  
Vol 47 ◽  
pp. 574-575
Author(s):  
Matthew R. Libera ◽  
Martin Chen
Keyword(s):  
Thin Film ◽  
Phase Change ◽  
Heat Sink ◽  
Multilayer Film ◽  
Glassy Phase ◽  
Film Structure ◽  
Glass Forming ◽  
Active Storage ◽  
Dielectric Layers ◽  
Amorphous States

Phase-change erasable optical storage is based on the ability to switch a micron-sized region of a thin film between the crystalline and amorphous states using a diffraction-limited laser as a heat source. A bit of information can be represented as an amorphous spot on a crystalline background, and the two states can be optically identified by their different reflectivities. In a typical multilayer thin-film structure the active (storage) layer is sandwiched between one or more dielectric layers. The dielectric layers provide physical containment and act as a heat sink. A viable phase-change medium must be able to quench to the glassy phase after melting, and this requires proper tailoring of the thermal properties of the multilayer film. The present research studies one particular multilayer structure and shows the effect of an additional aluminum layer on the glass-forming ability.

OPTIMIZATION OF THIN FILM STRUCTURE Ge2Sb2Te5 FOR OPTICAL SWITCHES

2018 ◽  
Vol 66-2 ◽  
pp. 2-8 ◽  
Author(s):  
N. V. Vishnyakov ◽  
◽  
N. M. Tolkach ◽  
P. S. Provotorov ◽  
◽  
...  
Keyword(s):  
Thin Film ◽  
Film Structure ◽  
Optical Switches ◽  
Thin Film Structure

scholarly journals The Effect of Extraction Conditions on the Barrier and Mechanical Properties of Kefiran Films

Coatings ◽  
2021 ◽  
Vol 11 (5) ◽  
pp. 602
Author(s):  
Carmen Rodica Pop ◽  
Teodora Emilia Coldea ◽  
Liana Claudia Salanţă ◽  
Alina Lăcrămioara Nistor ◽  
Andrei Borşa ◽  
...  
Keyword(s):  
Water Vapor ◽  
Conformational Changes ◽  
Water Vapor Permeability ◽  
Edible Films ◽  
Film Structure ◽  
Water Soluble ◽  
Vapor Permeability ◽  
Water Molecules ◽  
Compact Structure ◽  
Technology Applications

Kefiran is an exopolysaccharide classified as a heteropolysaccharide comprising glucose and galactose in equimolar quantities, and it is classified as a water-soluble glucogalactan. This work aimed to investigate the effect of different extraction conditions of kefiran on the structural and physical properties of the edible films obtained. Fourier-transform infrared spectroscopy and scanning electron microscopy were performed, together with a determinations of moisture content, solubility, water vapor permeability and degree of swelling. The kefiran films presented values of the water vapor permeability between 0.93 and 4.38 × 10−11 g/m.s.Pa. These results can be attributed to the development of a more compact structure, where glycerol had no power to increase the free volume and the water vapor diffusion through their structure. The possible conformational changes in the kefiran film structure, due to the interspersing of the plasticizers and water molecules that they absorb, could be the reason for producing flexible kefiran films in the case of using glycerol as a plasticizer at 7.5% w/w. Moreover, it was observed that the extraction conditions are a significant factor in the properties of these films and their food technology applications.

scholarly journals Kondo effect and superconductivity in niobium with iron impurities

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Hansong Zeng ◽  
Dan Zhou ◽  
Guoqing Liang ◽  
Rujun Tang ◽  
Zhi H. Hang ◽  
...  
Keyword(s):  
Magnetic Moment ◽  
Low Temperatures ◽  
Kondo Effect ◽  
Film Structure ◽  
Kondo Temperature ◽  
Superconducting Transition ◽  
Interesting Phenomenon ◽  
Superconducting Device ◽  
Bcc Lattice ◽  
Device Applications

AbstractKondo effect is an interesting phenomenon in quantum many-body physics. Niobium (Nb) is a conventional superconductor important for many superconducting device applications. It was long thought that the Kondo effect cannot be observed in Nb because the magnetic moment of a magnetic impurity, e.g. iron (Fe), would have been quenched in Nb. Here we report an observation of the Kondo effect in a Nb thin film structure. We found that by co-annealing Nb films with Fe in Argon gas at above 400 $$^{\circ }$$ ∘ C for an hour, one can induce a Kondo effect in Nb. The Kondo effect is more pronounced at higher annealing temperature. The temperature dependence of the resistance suggests existence of remnant superconductivity at low temperatures even though the system never becomes superconducting. We find that the Hamann theory for the Kondo resistivity gives a satisfactory fitting to the result. The Hamann analysis gives a Kondo temperature for this Nb–Fe system at $$\sim $$ ∼ 16 K, well above the superconducting transition onset temperature 9 K of the starting Nb film, suggesting that the screening of the impurity spins is effective to allow Cooper pairs to form at low temperatures. We suggest that the mechanism by which the Fe impurities retain partially their magnetic moment is that they are located at the grain boundaries, not fully dissolved into the bcc lattice of Nb.

scholarly journals Effect of high-frequency electromagnetic field on microstructure of mold flux

2020 ◽  
Vol 39 (1) ◽  
pp. 368-376
Author(s):  
Xingjuan Wang ◽  
Hebin Jin ◽  
Liguang Zhu ◽  
Ran Liu ◽  
Tushun Song
Keyword(s):  
Electromagnetic Field ◽  
High Frequency ◽  
Mold Flux ◽  
Film Structure ◽  
Glass Layer ◽  
Slag Film ◽  
Flux Flow ◽  
Layer Form ◽  
Finite Element Software ◽  
High Frequency Electromagnetic Field

AbstractSoft-contact of molten steel can be achieved by applying a high-frequency electromagnetic field above the mold of continuous casting, which can effectively eliminate surface defects and achieve billets with no cracks and no oscillation marks. It also has some influence on the mold flux. In this study, the effect of a high-frequency electromagnetic field (20 kHz) on a mold flux flow field was simulated using a finite element software, and the slag film was extracted using a slag film simulator. The effect of the high-frequency magnetic field on the microstructure of the mold flux was analyzed using X-ray diffraction, Raman spectroscopy, and mineral phase testing. The results show that the high-frequency electromagnetic field disrupts the orderly movement and increases the movement rate of the liquid flux. The precipitate phase of the slag film did not change, but the silicate dimer Q1 decreased, the chain Q2 increased, and the network degree was increased. The slag film structure changed from the original two-layer form of crystalline layer–glass layer into a three-layer form of crystal layer–glass layer–crystal, and the crystallization ratio increased by 35% on average. The grain-size melilite granularity was reduced from the original 0.12 to 0.005 mm.

scholarly journals Effect of film structure on CH3NH3PbI3 perovskite thin films’ degradation

AIP Advances ◽  
2021 ◽  
Vol 11 (2) ◽  
pp. 025226
Author(s):  
F. Khelfaoui ◽  
I. Belaidi ◽  
N. Attaf ◽  
M. S. Aida
Keyword(s):  
Thin Films ◽  
Film Structure

scholarly journals Effects of gap thickness and emitter location on the photoluminescence enhancement of monolayer MoS2 in a plasmonic nanoparticle-film coupled system

Nanophotonics ◽  
2020 ◽  
Vol 9 (7) ◽  
pp. 2097-2105
Author(s):  
Xiaozhuo Qi ◽  
Tsz Wing Lo ◽  
Di Liu ◽  
Lantian Feng ◽  
Yang Chen ◽  
...  
Keyword(s):  
Near Field ◽  
Central Area ◽  
Field Enhancement ◽  
Coupled System ◽  
Film Structure ◽  
Plasmonic Nanoparticle ◽  
Emitter Location ◽  
Radiation Properties ◽  
Radiation Enhancement ◽  
Quantum Emitters

AbstractPlasmonic nanocavities comprised of metal film-coupled nanoparticles have emerged as a versatile nanophotonic platform benefiting from their ultrasmall mode volume and large Purcell factors. In the weak-coupling regime, the particle-film gap thickness affects the photoluminescence (PL) of quantum emitters sandwiched therein. Here, we investigated the Purcell effect-enhanced PL of monolayer MoS2 inserted in the gap of a gold nanoparticle (AuNP)–alumina (Al2O3)–gold film (Au Film) structure. Under confocal illumination by a 532 nm CW laser, we observed a 7-fold PL peak intensity enhancement for the cavity-sandwiched MoS2 at an optimal Al2O3 thickness of 5 nm, corresponding to a local PL enhancement of ∼350 by normalizing the actual illumination area to the cavity’s effective near-field enhancement area. Full-wave simulations reveal a counterintuitive fact that radiation enhancement comes from the non-central area of the cavity rather than the cavity center. By scanning an electric dipole across the nanocavity, we obtained an average radiation enhancement factor of about 65 for an Al2O3 spacer thickness of 4 nm, agreeing well with the experimental thickness and indicating further PL enhancement optimization. Our results indicate the importance of configuration optimization, emitter location and excitation condition when using such plasmonic nanocavities to modulate the radiation properties of quantum emitters.

Sign in / Sign up

Export Citation Format

Share Document