scholarly journals Ripening Stage Affects the Quality of Fresh and Dehydrated Pineapples (Ananas comosus (L.) Merr.) cv. Mauritius in Sri Lanka

2020 ◽  
Vol 8 ◽  
pp. 29-37
Author(s):  
B.A.M.S. Kumara ◽  
Kasun D.T. Hettige
Keyword(s):  
Sensory Evaluation ◽  
Sugar Content ◽  
Titratable Acidity ◽  
Quality Parameters ◽  
Ananas Comosus ◽  
Maturity Stage ◽  
Ripening Stage ◽  
Dark Green ◽  
Green Stage

Pineapple (Ananas comosus (L.) Merr.) being a non climacteric fruit, its flavor and sugar content does not increase after harvesting. Thus, the maturity stage at harvesting affects the quality of pineapples after harvesting. This study was conducted to compare the quality parameters at four different ripening stages of pineapple (cultivar Mauritius-Queen type) and their effect on sensory properties after dehydration. Pineapples were harvested at dark green, 50% yellow, 75% yellow and 100% yellow color stages. Total Soluble Solid (TSS) content, Titratable Acidity (TA), TSS/TA ratio, pH, Fruit firmness, L*,a*,b* and hue angle were quantified in fresh samples and the appearance, texture, taste, odor, color and overall acceptability were evaluated in dehydrated samples at each ripening stage. The ripening stage had a significant (P<0.05) effect on selected quality parameters of fresh pineapples. Highest TSS content of 17.75±0.67 was observed in 100% yellow stage whereas the lowest was observed in dark green stage (15.75±0.48). In contrast, the highest firmness was observed in dark green stage (27.47±6.4 N) while the lowest was in 100% yellow stage (12.01±1.17 N). Lowest pH and highest TA were observed in dark green stage while the highest pH and lowest TA were observed in 100% yellow stage with values of 3.49±0.06, 0.82±0.02, 3.74±0.01 and 0.78±0.02, respectively. Sensory evaluation revealed that 75% yellow stage is the optimum ripening stage for dehydration of pineapple (cultivar Mauritius-Queen type) with significantly greater sensory evaluation ranks compared to other stages.

scholarly journals Preliminary Insights in Sensory Profile of Sweet Cherries

Foods ◽  
2021 ◽  
Vol 10 (3) ◽  
pp. 612
Author(s):  
Vânia Silva ◽  
Sandra Pereira ◽  
Alice Vilela ◽  
Eunice Bacelar ◽  
Francisco Guedes ◽  
...  
Keyword(s):  
Sweet Cherry ◽  
Prunus Avium ◽  
Sugar Content ◽  
Principal Component ◽  
Titratable Acidity ◽  
Physicochemical Characteristics ◽  
Quality Parameters ◽  
Sensory Profile ◽  
Soluble Solids ◽  
Sensory Data

Sweet cherry (Prunus avium L.) is a fruit appreciated by consumers for its well-known physical and sensory characteristics and its health benefits. Being an extremely perishable fruit, it is important to know the unique attributes of the cultivars to develop cultivation or postharvest strategies that can enhance their quality. This study aimed to understand the influence of physicochemical characteristics of two sweet cherry cultivars, Burlat and Van, on the food quality perception. Several parameters (weight, dimensions, soluble solids content (SSC), pH, titratable acidity (TA), colour, and texture) were measured and correlated with sensory data. Results showed that cv. Van presented heavier and firmer fruits with high sugar content. In turn, cv. Burlat showed higher pH, lower TA, and presented redder and brightest fruits. The principal component analysis revealed an evident separation between cultivars. Van cherries stood out for their sensory parameters and were classified as more acidic, bitter, and astringent, and presented a firmer texture. Contrarily, Burlat cherries were distinguished as being more flavourful, succulent, sweeter, and more uniform in terms of visual and colour parameters. The results of the sensory analysis suggested that perceived quality does not always depend on and/or recognize the quality parameters inherent to the physicochemical characteristics of each cultivar.

scholarly journals Effect of irrigation and potassium application in melon (Cucumis melo L.) production. II: Quality

2003 ◽  
Vol 1 (1) ◽  
pp. 79 ◽  
Author(s):  
F. Ribas ◽  
M.J. Cabello ◽  
M.M. Moreno ◽  
A. Moreno ◽  
L. López-Bellido
Keyword(s):  
Sugar Content ◽  
Fruit Size ◽  
Statistical Design ◽  
Quality Parameters ◽  
Water Levels ◽  
Skin Thickness ◽  
Water Restriction ◽  
Weight Percentage ◽  
Cucumis Melo L

The influence of different watering regimes and of potassium applications on the quality of the melon cultivar «Pielde Sapo» was studied over a two-year period (1995 and 1996). The statistical design was a split-plot with four replications,where irrigation was the main factor and applied potassium was the secondary factor. Water levels were determinedaccording to the watering needs (NRc) calculated on the basis of crop evapotranspiration. Four irrigationtreatments were tested: 1.25 NRc; 1.00 NRc; 0.75 NRc and 0.50 NRc. Two potassium treatments were applied: K0 (0UF) and K1 (375 UF K2O in 1995 and 2 L ha–1 of a commercial product for spraying 20% of K2O in 1996). The potassiumdoses tested did not significantly influence any of the quality parameters studied except for flesh firmness inthe placenta area in 1995. Both in 1995 and 1996, the water deficit significantly reduced fruit size and flesh thickness.The severe water restriction caused a strict decrease in the percentage of fruits with recorded weight above 2.5kg. However, the weight percentage of the placenta plus the seeds in relation to the whole fruit, and the sugar content,both increased significantly in water deficient treatments. In 1995, skin thickness decreased with less irrigation whileflesh firmness increased. Following quality concerns, and in order to obtain large fruits with appropriate levels ofsugar, it is advisable to provide water amounts that meet the crop’s watering needs

scholarly journals Potential of Postharvest Coatings to Maintain Freshness of Red-Fleshed Pitaya (Hylocereus costaricensis)

Agriculture ◽  
2021 ◽  
Vol 11 (9) ◽  
pp. 892
Author(s):  
Nur Azlin Razali ◽  
Steven A. Sargent ◽  
Charles A. Sims ◽  
Jeffrey K. Brecht ◽  
Adrian D. Berry ◽  
...  
Keyword(s):  
Weight Loss ◽  
Tap Water ◽  
Titratable Acidity ◽  
Quality Parameters ◽  
The Other ◽  
Soluble Solids ◽  
Postharvest Quality ◽  
Quality Factors ◽  
Climacteric Fruit

Pitaya is a non-climacteric fruit that has white or red flesh with numerous small, black seeds. It has a high moisture content; however, water loss during handling and storage negatively affects the fresh weight, firmness and appearance of the fruit, decreasing market value. Application of compatible postharvest coatings has been shown to benefit postharvest quality of many crops. The objective of this study was to evaluate the effect of two commercial coatings on weight loss and quality of pitaya during storage. Pitaya fruit were commercially harvested and sorted for uniformity of size and freedom from defects. Fruit were briefly immersed in either a vegetable oil-based coating (VOC; Sta-Fresh® 2981) or a carnauba-based coating (CC; Endura-Fresh™ 6100) according to manufacturer’s recommendations. Fruit immersed in tap water served as a control. Fruit were fan-dried at room temperature for 20 min, then stored at 7 °C with 85% relative humidity (RH) and evaluated for selected physical quality parameters each 5 days during 20 days. After each evaluation, fruit were peeled and frozen for later analysis of soluble solids content (SSC), total titratable acidity (TTA); on day 15 fresh samples were evaluated by an untrained consumer sensory panel. CC prevented exocarp shriveling for 15 days of storage, compared to uncoated pitaya (16.3% area affected); shriveling in VOC was intermediate and not significantly different from the other treatments. Mesocarp firmness remained constant throughout 15 days of storage regardless of treatment. Fruit exocarp h* angle increased slightly by day 20, becoming slightly less red, and there were no negative treatment effects for the other quality factors measured: SSC (11.33%), TTA (0.25%), weight loss (5.5%) or sensory evaluations (appearance, flavor, texture, firmness, and juiciness). After 20 days storage, appearance for fruit from all treatments was rated unacceptable due to development of anthracnose lesions. It was concluded that both CC and VOC maintained quality of pitaya for 15 days at 7 °C and 85% RH by delaying exocarp shriveling.

scholarly journals Post-harvest quality of Campomanesia adamantium (Cambess.) O. Berg. in function of storage temperature

2020 ◽  
Vol 43 ◽  
pp. e48979
Author(s):  
Marília Assis do Santos ◽  
Alan Carlos Costa ◽  
Clarice Aparecida Megguer ◽  
Júlien da Silva Lima ◽  
Yasmin Giovanna Santos Carvalho ◽  
...  
Keyword(s):  
Visual Analysis ◽  
Storage Temperature ◽  
Titratable Acidity ◽  
Soluble Solids ◽  
Maturity Stage ◽  
Post Harvest ◽  
Fruit Species ◽  
Randomized Design ◽  
Soluble Solid

Brazil has a large variety of native and exotic fruit species, including the gabiroba, which can be sources of income for the population. The objective of this study was to evaluate the post-harvest behavior of gabiroba fruit by maturity stage and storage temperature. The fruits were divided into two lots and stored at temperatures of 6, 12, 24 and 30°C. The first batch was used for the physical and chemical analysis of acidity, soluble solids, firmness, percentage of green color, and visual analysis; this batch was composed of green and yellow-green fruit. The second lot was intended for breath analysis, composed of green, yellow-green, and yellow fruits. The experiment was conducted in a completely randomized design with five replications. Data were analyzed using descriptive statistics. Considering the evaluated characteristics, the gabiroba soluble solid/titratable acidity ratio values should be approximately 4.0 for the fruits to be considered acceptable for consumption. For the preservation of the post-harvest quality of gabiroba, it is indicated that the harvest is carried out at the green stage of maturation and that they are stored at a temperature of 6°C. The highest respiratory rates were observed in fruits harvested at the yellow stage, not being recommended its storage.

scholarly journals Quality of dried banana produced from three cultivars 'Prata-Anã', 'FHIA-18'and 'BRS Platina' under different irrigation levels

2019 ◽  
Vol 13 ((03) 2019) ◽  
pp. 340-347
Author(s):  
Maristella Martineli ◽  
Kennia Karolline Gonçalves Pereira ◽  
João Rafael Prudêncio dos Santos ◽  
Ariane Castricini ◽  
Polyanna Mara de Oliveira ◽  
...  
Keyword(s):  
Purchase Intention ◽  
Titratable Acidity ◽  
Quality Parameters ◽  
Soluble Solids ◽  
Maturity Stage ◽  
Hot Air ◽  
Forced Air ◽  
Semi Arid Region ◽  
Physical And Chemical ◽  
Irrigation Levels

This study aimed to evaluate the influence of different levels of irrigation on the quality parameters involved in the dried-bananas production from 3 different cultivars. The experimental design was a completely randomized factorial 3 x 3, with three genotypes of bananas (Prata-Anã, FHIA-18 and BRS Platina) produced in the semi-arid region of Minas Gerais.) and three irrigation levels (50, 75 and 100% of crop evapotranspiration - ETC), with three replications. For the processing purpose, the fruits were selected at the maturity stage 6. Then they sanitized in hypochlorite of sodium solution at 100 mg L-1, peeled and dehydrated through the drying convective method with hot air, in dryer with forced air, in dryer with forced air circulation at 65ºC for 24 hours. The dried bananas were evaluated according to the following physical and chemical aspects: moisture, length, diameter, firmness, color (brightness, chroma and ºHue), soluble solids and titratable acidity, and sensory characteristics: purchase intention and acceptance. The humidity, length, diameter, firmness, color and acidity of dried bananas were influenced by the different studied irrigation levels. In the sensory evaluation, the best result regarding appearance, color, texture and flavor requirements was observed in banana processed from 'Prata-Anã' irrigated with the total level of water (100%). The dried banana processed from 'BRS Platina' was the least accepted in the sensory tests.

scholarly journals Quality Control of Fresh-Cut Apples after Coating Application

Foods ◽  
2019 ◽  
Vol 8 (6) ◽  
pp. 189 ◽  
Author(s):  
Martina Cofelice ◽  
Francesco Lopez ◽  
Francesca Cuomo
Keyword(s):  
Oil Content ◽  
Titratable Acidity ◽  
Barrier Properties ◽  
Quality Parameters ◽  
Moisture Loss ◽  
Gas Barrier ◽  
Coating Application ◽  
Fresh Cut ◽  
Set Up

The growing demand for ready-to-eat fresh fruits has led to set-up appropriate strategies for preserving fruit quality and freshness of such commodities. To slow down the deterioration events such as respiration, moisture loss and enzymatic activity, ready-to-eat products should be protected with an edible film. A suitable coating should combine hydrophilic and hydrophobic features to ensure good mechanical and gas barrier properties. Alginate/essential oil nanoformulations, one with low and the other with high oil content, here proposed to protect apple pieces during storage, were first characterized through dynamic light scattering and rheology. The effect of the application of the nanoformulations on the quality parameters of apples stored at 4 °C was considered by evaluating weight loss, pH and titratable acidity, total phenols content and the fruit appearance during storage. Mainly on the basis of pH and titratable acididty variation, the nanoformulation with low oil content resulted eligible for preserving the quality of fresh-cut apple pieces during storage.

scholarly journals Effects of Yeast Concentration and Total Soluble Solids on the Quality of Wine Produced from Pineapple

2020 ◽  
pp. 28-42
Author(s):  
E. C. Udeagha ◽  
C. N. Ishiwu ◽  
C. U. Obiora ◽  
J. O. Iwouno
Keyword(s):  
Titratable Acidity ◽  
Ash Content ◽  
Soluble Solids ◽  
Ananas Comosus ◽  
Wine Production ◽  
Total Soluble Solids ◽  
General Acceptance ◽  
Yeast Concentration ◽  
Mouth Feel

This research was carried out to determine the effects of yeast concentration and total soluble solids on the quality of wine produced from pineapple. The experiment was a Response Surface Methodology in the form of Rotatable Central Composite Design (RCCD). Ripe pineapple fruit (Ananas comosus) was processed using pressure extraction to obtain the juice. The juice was divided into thirteen (13) portions. Each portion’s total soluble solids was adjusted using sugar syrup and then pitched with specified yeast concentration. All the thirteen (13) samples were fermented for 168 h at 25±3 °C and aged for seven weeks. The wine was analyzed for pH, titratable acidity, ash content, final total soluble solids and alcohol content using standard methods. The sensory attributes (colour, aroma, taste, mouth-feel, texture and general acceptability) of the wines were analyzed by a twenty-five member panelist using 9-point hedonic scale. The results of the physico-chemical analysis of the pineapple wines showed that pH , titratable acidity (tartaric acid) content, alcohol and final total soluble solids ranged from 3.58 – 4.58, 0.33 – 0.59 %, 4.33 – 10.66 %v/v, 3.35 – 5.65 °Brix respectively. The ash content ranged from 0.20 – 0.50 %. The mean sensory scores for colour, taste, aroma, texture, mouth-feel and general acceptance ranged from 3.28 – 7.96, 4.08 – 6.68, 4.04 – 5.96, 4.16 – 5.32, 4.00 – 5.84 and 4.04 – 6.72 respectively.  The mouthfeel of the pineapple wine samples did not differ significantly (P ≥ .05). Taste and alcohol exhibited significant model (P < .05), and were fitted into regression models. Pineapple has been found suitable for wine production. Using Saccharomyces cerevisiae var cerevisiae concentration of 6 %v/v and total soluble solids of 25 °Brix is suitable for production of pineapple wine and should be adopted.

scholarly journals Influence of leaf removal and reflective mulch on phenolic composition of white wines

OENO One ◽  
2015 ◽  
Vol 49 (3) ◽  
pp. 183
Author(s):  
Mirela Osrečak ◽  
Marko Karoglan ◽  
Bernard Kozina ◽  
Darko Preiner
Keyword(s):  
Phenolic Compounds ◽  
Phenolic Acid ◽  
Sugar Content ◽  
Titratable Acidity ◽  
Phenolic Composition ◽  
Transparent Film ◽  
Leaf Removal ◽  
White Wines ◽  
Consistent Effect

<p style="text-align: justify;"><strong>Aim</strong>: The aim of this research was to evaluate if leaf removal and red geotextile reflective mulch “Vitexsol” could affect phenolic composition of wines from three white cultivars, Riesling italico, Traminer, and Manzoni bianco.<strong></strong></p><p style="text-align: justify;"><strong>Methods and results</strong>: A two-year study was conducted to evaluate the effects of leaf removal and reflective mulch on the phenolic composition of white wines from Zagreb vineyards in northwestern Croatia. Leaf removal (LR) and reflective mulch (RM) “Vitexsol”, made from weave of aluminum platelets protected by a transparent film and sewn together with red polypropylene threads, were tested separately and combined (LR+RM) on vines of Traminer, Riesling italico and Manzoni bianco in 2008 and 2009. LR and RM had no consistent effect on must sugar content and titratable acidity. All treatments resulted in higher total phenol and flavan-3-ol content in wines of all cultivars, but in different years. LR+RM generally resulted in the highest phenolic acid and individual flavan-3-ol content in all wines except Traminer. RM treatment had the least effect on phenolic composition of wines.</p><p style="text-align: justify;"><strong>Conclusion</strong>: LR+RM generally resulted in the highest content of most phenolic compounds, especially when compared to control wines.</p><strong>Significance and impact of the study</strong>: This work provides some useful informations for adjusting vineyard practices and thus optimizing phenolic quality of white wines.

scholarly journals Quality parameters of tomatoes submitted to different doses of gamma radiation

2018 ◽  
Vol 21 (0) ◽  
Author(s):  
Ana Carolina Loro ◽  
Victor Wilson Botteon ◽  
Marta Helena Fillet Spoto
Keyword(s):  
Ascorbic Acid ◽  
Gamma Radiation ◽  
Titratable Acidity ◽  
Quality Parameters ◽  
Soluble Solids ◽  
Maturation Stage ◽  
Long Life ◽  
Irradiation Process ◽  
Different Doses

Abstract Ionizing radiation can be used for different purposes in the food industry. In this study, the effect of irradiation doses (0, 0.5, 1.0 and 1.5 kGy) on the quality parameters of long life tomatoes (Lycopersicon esculentum Mill.), was evaluated during 4 storage periods (1, 7, 14 and 21 days). The different treatments were evaluated by analysing for colour, pH, total soluble solids (TSS), total titratable acidity (TTA), ratio (TSS/TTA), hardness, total lycopene and ascorbic acid contents, weight loss and maturation stage (O2 /CO2 ratio) for all the storage periods. The tomato samples were irradiated in a Co60 irradiator and maintained at 22 °C ± 1 °C. The quality of the tomato fruits was influenced by the gamma radiation basically by making the fruits softer and not degrading the ascorbic acid and lycopene contents at the doses evaluated. The irradiation process used in the doses evaluated was promising with respect to maintaining the quality parameters of long life tomatoes.

scholarly journals Effects of Plant Age, Topography and Processing System On the Biochemical Traits and Quality of Tea

2021 ◽  
Vol 50 (3) ◽  
pp. 633-639
Author(s):  
Md Sakib Hossain ◽  
Rayhan Uddin ◽  
Pranti Barua ◽  
- Md Yasin ◽  
Mohammad Shameem Al Mamun ◽  
...  
Keyword(s):  
Sugar Content ◽  
Processing System ◽  
Quality Parameters ◽  
Tea Plant ◽  
Total Sugar ◽  
Plant Age ◽  
Carotenoid Content ◽  
Young Plant ◽  
Total Sugar Content

Laboratory experiment was conducted to study the biochemical and quality parameters of tea i.e. Polyphenol, Theaflavin (TF), Thearubigin (TR), Caffeine, Lipid, Total ash, Chlorophyll, Moisture content etc. under different variables designed for age, topography, and processing system imposed on an established tea orchard. Results revealed that plant age and topography do not have any significant effect on most of the studied parameters. In case of plant age, tannin is found to be significantly higher in mature tea plant (39.35 ppm) whereas young plant showed significantly lower total sugar content (28.98 ppm). In case of land elevation, significantly higher tannin (37.41 ppm) and lower carotenoid content (0.74 mg/g) were evident in plants from kunchi topography where flat topography showed significantly higher total sugar (26.62 ppm) in leaves. The handmade tea flavoured with significantly higher amount of polyphenol (58.57 ppm) and caffein (43.30 ppm) but industry made tea showed significantly higher amount of tannin (37.65 ppm), total sugar (15.25 ppm) and TF:TR (1:10). Bangladesh J. Bot. 50(3): 633-639, 2021 (September)

Sign in / Sign up

Export Citation Format

Share Document