scholarly journals Impact of Radio-frequency Atmospheric-pressure Plasma on Water Contact Angles of High-impact Polystyrene

2018 ◽  
pp. 1213
Keyword(s):  
Radio Frequency ◽  
Atmospheric Pressure ◽  
Atmospheric Pressure Plasma ◽  
Contact Angles ◽  
High Impact ◽  
Water Contact ◽  
Pressure Plasma ◽  
High Impact Polystyrene

scholarly journals In Situ Surface Modification of Paper-Based Relics with Atmospheric Pressure Plasma Treatment for Preservation Purposes

Polymers ◽  
2019 ◽  
Vol 11 (5) ◽  
pp. 786
Author(s):  
Xu Yan ◽  
Guo-Sai Liu ◽  
Jing Yang ◽  
Yi Pu ◽  
Shuo Chen ◽  
...  
Keyword(s):  
Plasma Treatment ◽  
Atmospheric Pressure ◽  
Atmospheric Pressure Plasma ◽  
Good Method ◽  
Contact Angles ◽  
Water Penetration ◽  
Water Contact ◽  
Pressure Plasma ◽  
Static Water

Paper-based relics, which are an important part of cultural heritage worldwide, are at risk of imminent damage from various environmental sources. To protect them, the atmospheric pressure plasma polymerization of hexamethyldisiloxane (HMDSO) precursor has been explored on paper-based relics in situ. The macro and micro images taken during this process suggest that the in situ plasma treatment does not change the macro morphology and the micro structure of the treated paper-based relic samples. On the other hand, plasma treatment causes the polymerization of the HMDSO which then produces nanoparticles deposited onto the paper-based relics. These nanoparticles provide good waterproof properties with large static water contact angles and smaller rolling angles, which protect the paper-based relics from water penetration. Moreover, since the nanoparticles are deposited onto the fibers, waterproof fastness is ensured. Also, the examined mechanical properties of the treated and untreated paper-based relics indicate that the atmospheric pressure plasma treatment does not affect the strength of the paper very much. The results in this study show that atmospheric pressure plasma treatment with the use of HMDSO precursor is a good method to preserve paper-based relics.

scholarly journals Synthesis and Properties of Plasma-Polymerized Methyl Methacrylate via the Atmospheric Pressure Plasma Polymerization Technique

Polymers ◽  
2019 ◽  
Vol 11 (3) ◽  
pp. 396 ◽  
Author(s):  
Choon-Sang Park ◽  
Eun Jung ◽  
Hyo Jang ◽  
Gyu Bae ◽  
Bhum Shin ◽  
...  
Keyword(s):  
Methyl Methacrylate ◽  
Photoelectron Spectroscopy ◽  
Atmospheric Pressure ◽  
Secondary Ion Mass Spectrometry ◽  
Atmospheric Pressure Plasma ◽  
Thickness Measurement ◽  
Water Contact ◽  
Pressure Plasma ◽  
Measurement Results ◽  
The Fourier Transform

Pinhole free layers are needed in order to prevent oxygen and water from damaging flexible electrical and bio-devices. Although polymerized methyl methacrylate (polymethyl methacrylate, PMMA) for the pinhole free layer has been studied extensively in the past, little work has been done on synthesizing films of this material using atmospheric pressure plasma-assisted electro-polymerization. Herein, we report the synthesis and properties of plasma-PMMA (pPMMA) synthesized using the atmospheric pressure plasma-assisted electro-polymerization technique at room temperature. According to the Fourier transform infrared spectroscopy (FT-IR), X-ray photoelectron spectroscopy (XPS), and time of flight-secondary ion mass spectrometry (ToF-SIMS) results, the characteristic peaks from the pPMMA polymer chain were shown to have been detected. The results indicate that the percentage of hydrophobic groups (C–C and C–H) is greater than that of hydrophilic groups (C–O and O–C=O). The field emission-scanning electron microscope (FE-SEM) and thickness measurement results show that the surface morphology is quite homogenous and amorphous in nature, and the newly proposed pPMMA film at a thickness of 1.5 µm has high transmittance (about 93%) characteristics. In addition, the results of water contact angle tests show that pPMMA thin films can improve the hydrophobicity.

scholarly journals The dynamics of radio-frequency driven atmospheric pressure plasma jets

2009 ◽  
Vol 162 ◽  
pp. 012013 ◽  
Author(s):  
L Schaper ◽  
S Reuter ◽  
J Waskoenig ◽  
K Niemi ◽  
V Schulz-von der Gathen ◽  
...  
Keyword(s):  
Radio Frequency ◽  
Atmospheric Pressure ◽  
Atmospheric Pressure Plasma ◽  
Plasma Jets ◽  
Pressure Plasma

scholarly journals Effect of Modification with Helium Atmospheric-Pressure Plasma and Deep-Ultraviolet Light on Adhesive Shear Strength of Fiber-Reinforced Poly(ether-ether-ketone) Polymer

2020 ◽  
Vol 11 (2) ◽  
pp. 27
Author(s):  
Seigo Okawa ◽  
Norimasa Taka ◽  
Yujin Aoyagi
Keyword(s):  
Atmospheric Pressure ◽  
Testing Machine ◽  
Atmospheric Pressure Plasma ◽  
Contact Angles ◽  
Fiber Reinforced ◽  
Pressure Plasma ◽  
Ether Ether Ketone ◽  
Poly Ether Ether Ketone ◽  
Deep Ultraviolet ◽  
Ether Ketone

We investigated the effect of helium atmospheric-pressure plasma (PL) and deep-ultraviolet (UV) light treatments on the adhesive properties of fiber-reinforced poly(ether-ether-ketone) polymer (PEEK). PEEK disks reinforced with carbon (CPEEK) or glass (GPEEK) fibers were polished, modified with PL and UV for 60 s, and the surface energy was calculated by measuring the contact angles. The disk surfaces were analyzed by X-ray photoemission spectroscopy. Shear bond strength testing was performed using a universal testing machine, and the fracture surfaces were observed by electron probe microanalyzer. Data were analyzed with one and two-way ANOVA and Tukey’s post-hoc test (p < 0.05). The surface energies were increased by the modifications, which created OH functional groups on the surfaces. The bond strengths of CPEEK were increased by PL, and those of GPEEK were increased by PL and UV, owing to chemical bonding at the interface.

Effects of green technology plasma pre-treatment on the wettability and ink adhesion of paper

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Samed Ayhan Özsoy ◽  
Safiye Meriç Acıkel ◽  
Cem Aydemir
Keyword(s):  
Contact Angle ◽  
Plasma Treatment ◽  
Surface Properties ◽  
Atmospheric Pressure ◽  
Atmospheric Pressure Plasma ◽  
Contact Angles ◽  
Content Type ◽  
Surface Energies ◽  
Pressure Plasma ◽  
Plasma Device

Purpose The surface energy of the printing material can be increased to desired levels with different chemicals or methods. However, the important thing is that the surface properties of printing material are not affected negatively. In this way the aim of this paper provide that the surface properties of matte and glossy coated paper is improved by the argon containing atmospheric pressure plasma device because the plasma treatment method does not occur surface damaging on the papers. Design/methodology/approach In experimental studies, test samples cut from 160 mm × 30 mm in size from 115 g/m2 gloss- and matt-coated papers were used. The plasma treatments of paper samples were carried out with an argon containing atmospheric pressure plasma device of laboratory scale that produces plasma of the corona discharge type at radio frequency. The optimized plasma parameters were at a frequency of 20 kHz and plasma power 200 W. A copper electrode of length 12 cm and diameter 2.5 mm was placed in the centre of the nozzle. Findings Research findings showed that the surface energies of the papers increased with the increase in plasma application time. While the contact angle of the untreated glossy paper is 82.2, 8 second plasma applied G3 sample showed 54 contact angle value. Similarly, the contact angle of the base paper of matt coated is 91.1, while M3 is reduced to 60.4 contact angles by the increasing plasma time. Originality/value Plasma treatment has shown that no chemical coating is needed to increase the wettability of the paper surface by reducing the contact angle between the paper and the water droplet. In addition, the surface energies of all papers treated by argon gas containing atmospheric pressure plasma, increased. Plasma treatment provides to improve both the wettability of the paper and the adhesion property required for the ink, with an environmentally friendly approach.

Sign in / Sign up

Export Citation Format

Share Document