scholarly journals Investigating the wastewater treatment system of the Tehran Oil Industry Research Institute using the Life Cycle Assessment Method

2020 ◽  
Author(s):  
Afsaneh Eskandari Ashgofti ◽  
Maryam Morovati ◽  
Ebrahim Alaiee ◽  
Kamelia Alavi
Keyword(s):  
Wastewater Treatment ◽  
Life Cycle Assessment ◽  
Life Cycle ◽  
Raw Materials ◽  
Industrial Effluent ◽  
Treatment Plant ◽  
Industrial Effluents ◽  
Assessment Method ◽  
The Impact ◽  
Research Institute

Introduction: Due to population growth and subsequent limited water resources, the use of treatment plant effluents is of particular importance. Therefore, this study was conducted to identify the environmental effects of the treatment plant and also to identify critical points or weaknesses of the treatment plant system and provide corrective action to reduce the severity of the effects.  Methods: After visiting the research institute and collecting data (during the years 2017-2018), the energy, consuming materials and output of the system were calculated using the life cycle assessment method. Finally, information on the spread of pollution and consumption was included in the list of index effects. To analyze the obtained information, Simapro software (using ILCD 2011 Midpoint V1.03 method) version 8.5.0.0. was applied. Results: Based on the research findings, the software depicted the evaluation of the effects in 13 categories and all the information entered in the software according to the impact, has participated in each category of effects, the most effective factors related to chloride, energy consumption and oil. Conclusion: The results of this study show that the main critical point identified in the treatment plant is related to electricity and the sanitary effluent is in a worse condition than the industrial effluent. However, the environmental impact of industrial effluents should not be neglected. Due to the fact that the MBR method is considered as one of the best methods of wastewater treatment, it is not recommended to change the treatment method, but with continuous monitoring and management of the system, it is possible to reduce the consumption of raw materials.

scholarly journals Valuing Biodiversity in Life Cycle Impact Assessment

2019 ◽  
Vol 11 (20) ◽  
pp. 5628 ◽  
Author(s):  
Jan Lindner ◽  
Horst Fehrenbach ◽  
Lisa Winter ◽  
Judith Bloemer ◽  
Eva Knuepffer
Keyword(s):  
Land Use ◽  
Life Cycle Assessment ◽  
Life Cycle ◽  
Impact Assessment ◽  
Raw Materials ◽  
Assessment Method ◽  
Value Chains ◽  
Conservation Priorities ◽  
Impact Assessment Method ◽  
The Impact

In this article, the authors propose an impact assessment method for life cycle assessment (LCA) that adheres to established LCA principles for land use-related impact assessment, bridges current research gaps and addresses the requirements of different stakeholders for a methodological framework. The conservation of biodiversity is a priority for humanity, as expressed in the framework of the Sustainable Development Goals (SDGs). Addressing biodiversity across value chains is a key challenge for enabling sustainable production pathways. Life cycle assessment is a standardised approach to assess and compare environmental impacts of products along their value chains. The impact assessment method presented in this article allows the quantification of the impact of land-using production processes on biodiversity for several broad land use classes. It provides a calculation framework with degrees of customisation (e.g., to take into account regional conservation priorities), but also offers a default valuation of biodiversity based on naturalness. The applicability of the method is demonstrated through an example of a consumer product. The main strength of the approach is that it yields highly aggregated information on the biodiversity impacts of products, enabling biodiversity-conscious decisions about raw materials, production routes and end user products.

Life cycle assessment of introducing an anaerobic digester in a municipal wastewater treatment plant in Spain

2015 ◽  
Vol 73 (4) ◽  
pp. 835-842 ◽  
Author(s):  
David Blanco ◽  
Sergio Collado ◽  
Adriana Laca ◽  
Mario Díaz
Keyword(s):  
Climate Change ◽  
Wastewater Treatment ◽  
Life Cycle Assessment ◽  
Life Cycle ◽  
Carbon Dioxide Emissions ◽  
Municipal Wastewater ◽  
Treatment Plant ◽  
Impact Category ◽  
Treatment Scenario ◽  
The Impact

Anaerobic digestion (AD) is being established as a standard technology to recover some of the energy contained in the sludge in wastewater treatment plants (WWTPs) as biogas, allowing an economy in electricity and heating and a decrease in climate gas emission. The purpose of this study was to quantify the contributions to the total environmental impact of the plant using life cycle assessment methodology. In this work, data from real operation during 2012 of a municipal WWTP were utilized as the basis to determine the impact of including AD in the process. The climate change human health was the most important impact category when AD was included in the treatment (Scenario 1), especially due to fossil carbon dioxide emissions. Without AD (Scenario 2), increased emissions of greenhouse gases, mostly derived from the use of electricity, provoked a rise in the climate change categories. Biogas utilization was able to provide 47% of the energy required in the WWTP in Scenario 1. Results obtained make Scenario 1 the better environmental choice by far, mainly due to the use of the digested sludge as fertilizer.

scholarly journals Life cycle assessment of electric and conventional cars energy consumption and CO2 emissions

2018 ◽  
Vol 234 ◽  
pp. 02007 ◽  
Author(s):  
Ivan Evtimov ◽  
Rosen Ivanov ◽  
Georgi Kadikyanov ◽  
Gergana Staneva
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Energy Consumption ◽  
Raw Materials ◽  
Electric Energy ◽  
Assessment Method ◽  
Electric Cars ◽  
Electric Car ◽  
Electric Traction ◽  
The Impact

This paper presents an analysis concerning the effectiveness of electric traction in comparison with conventional cars. The Life Cycle Assessment method is used. It estimates the energy spent for the extraction of the raw materials/sources, manufacturing and transportation of the components and the vehicle, motion, maintenance and repair during exploitation period and the recycling process. The impact of the production technology of the electric energy, needed for charging the battery, is taken into account. The energy consumption and CO2 emissions for the life cycle of electric and conventional cars are presented on graphs. Examples for Bulgaria and EU countries are given. The exploitation conditions in which the electric car is more effective regarding CO2 equivalent emissions are shown. The main influence on the effectiveness of electric cars has the structure of the energy mix of the country where the electric car is produced and is used in exploitation.

scholarly journals PRODUCT LIFE CYCLE ASSESSMENT METHOD AS AN EFFECTIVE COMPLEX OF ACTIONS REGARDING THE ECO-SAFETY OF THE CHEMICAL INDUSTRY

2021 ◽  
pp. 52-57
Author(s):  
Yevheniia Matis ◽  
Olga Krot
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Product Life Cycle ◽  
Raw Materials ◽  
Assessment Method ◽  
Solid Waste Disposal ◽  
Inventory Analysis ◽  
Iso 14040 ◽  
Product Life ◽  
The Impact

Based on the methods of product life cycle assessment, it is proposed to assess the environmental friendliness of the chemical plant. The LCA method represents the very systematic approach to assessing the environmental impact of production, carried out as a whole over its life cycle from the extraction and processing of raw materials to the use of individual components. It is used to systematically assess the impact of each stage of the production life cycle on the environment. Life cycle inventory analysis includes the collection of data required for the study, as well as the inventory of input (energy, water, raw materials and materials) and output (emissions into the environment, emissions, solid waste disposal, eastern water flows). a system that is a set of single processes interconnected by the flows of semi-finished products used in one or more given functions, with other productive systems and elementary flows with the environment (emissions into the atmosphere, discharges into water). Life cycle assessment (LCA) is a method that should be used to quantify the products and services of the environment carried out during its life cycle (ISO 14040 (2006)). There are several procedures approved by this methodology to support the calculation of the impact on emergencies. The methodology includes commercial software tools that are used directly or indirectly [1]. One of the goals of the LCA is to analyze the development of the production process at the station of emergency facilities. According to ISO 14040 (2006), the product life cycle assessment structure includes: 1) determining the level and scope to limit the study and select a functional unit; 2) analysis of input and output reserves of energy and materials that are important for the study of the research system; 3) life cycle impact assessment (LCIA) to classify environmental impacts; 4) phase interpretation, to test the overall popularity of the conclusion. The LCA can manage information to analyze and support the project and production decision-making process.

scholarly journals 2-Piece Cork Stoppers as Alternative for Valorization of Thin Cork Planks: Analysis by LCA Methodology

Foods ◽  
2021 ◽  
Vol 10 (4) ◽  
pp. 873
Author(s):  
Francisco Javier Flor-Montalvo ◽  
Agustín Sánchez-Toledo Ledesma ◽  
Eduardo Martínez Cámara ◽  
Emilio Jiménez-Macías ◽  
Jorge Luis García-Alcaraz ◽  
...  
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Raw Materials ◽  
Lca Methodology ◽  
Significant Difference ◽  
Different Dimensions ◽  
The Impact ◽  
Different Thickness ◽  
Cork Stoppers ◽  
Wine Bottle

Natural stoppers are a magnificent closure for the production of aging wines and unique wines, whose application is limited by the availability of raw materials and more specifically of cork sheets of different thickness and quality. The growing demand for quality wine bottle closures leads to the search for alternative stopper production. The two-piece stopper is an alternative since it uses non-usable plates in a conventional way for the production of quality caps. The present study has analyzed the impact of the manufacture of these two-piece stoppers using different methodologies and for different dimensions by developing an LCA (Life Cycle Assessment), concluding that the process phases of the plate, its boiling, and its stabilization, are the phases with the greatest impact. Likewise, it is detected that the impacts in all phases are relatively similar (for one kg of net cork produced), although the volumetric difference between these stoppers represents a significant difference in impacts for each unit produced.

Life Cycle Assessment of Urban Wastewater Treatment

2014 ◽  
Vol 535 ◽  
pp. 346-349
Author(s):  
Mei Wang ◽  
Ming Yang ◽  
Jun Liu ◽  
Jian Fen Li
Keyword(s):  
Wastewater Treatment ◽  
Life Cycle Assessment ◽  
Life Cycle ◽  
Wastewater Treatment Plant ◽  
Sewage Treatment ◽  
Treatment Plant ◽  
Urban Wastewater ◽  
Urban Sewage ◽  
Urban Wastewater Treatment ◽  
Whole Life Cycle

Effect and benefits of a product or service could be analyzed and evaluated by life cycle assessment during the whole life cycle. Urban sewage treatment plants could improve and control urban water pollution escalating, but it also had certain harm to environment. Effect and benefits of urban wastewater treatment plant A and B were analyzed and evaluated, 13 factors were selected, and comprehensive benefits were researched quantificationally using the method of analytic hierarchy process. It found that urban wastewater treatment plant A who applied A/O process had better benefits than urban wastewater treatment plant B who applied BIOLAK process.

scholarly journals Global Warming Impacts Study of Tofu Products in Mampang Prapatan Small and Medium Enterprises with Life Cycle Assessment Methods

2019 ◽  
Author(s):  
Bayu Sukmana ◽  
Isti Surjandari ◽  
Muryanto . ◽  
Arief A. R. Setiawan ◽  
Edi Iswanto Wiloso
Keyword(s):  
Global Warming ◽  
Life Cycle Assessment ◽  
Life Cycle ◽  
Greenhouse Gas ◽  
Raw Materials ◽  
Small And Medium Enterprises ◽  
Liquefied Petroleum Gas ◽  
Fuel Wood ◽  
Medium Enterprises ◽  
The Impact

Firstly global warming issue caused by greenhouse gas emissions (CO2) which comes from human activities. Along with increasing of daily need, that humans of activities food produce is also increase, include of tofu. Tofu is a traditional Indonesian specialty made from soybeans and used as a side dish. The purpose of this study was to determine the impact of global warming from tofu products on Mampang Prapatan's Small Tofu and Medium Enterprises. The method used in this study is the Life Cycle Assessment (LCA) method with the help of Simapro 8.4 software with a 1 kg tofu functional unit. The data collected in this study is the average data of tofu production for 3 months, namely January - March 2018. The LCA data in this study include the process of soybean cultivation, transportation processes for shipping soybeans, water, fuel wood, and electricity use. The limitations of this study are from cradle (soybean cultivation) to gate (tofu products).The results showed that UKM Mampang Prapatan has the potential impact of global warming with a value of 3.84 kg CO2-eq, while the value of global warming in the production process knows the scenario of wastewater treatment and the use of Liquefied Petroleum Gas (LPG) as fuel for boiling pulp 4.49 kg CO2-eq soybeans. Based on the results of this study, greenhouse gas (CO2) emissions are issued; the intervention that can be done is to optimize the use of raw materials for production to reduce the impact of CO2-eq kg global warming.

scholarly journals Research on Carbon Emissions of Electric Vehicles throughout the Life Cycle Assessment Taking into Vehicle Weight and Grid Mix Composition

Energies ◽  
2019 ◽  
Vol 12 (19) ◽  
pp. 3612 ◽  
Author(s):  
Yanmei Li ◽  
Ningning Ha ◽  
Tingting Li
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Electric Vehicles ◽  
Carbon Emissions ◽  
Linear Regression Analysis ◽  
Clean Energy ◽  
Assessment Method ◽  
Weight Class ◽  
Vehicle Weight ◽  
The Impact

To study the impact of the promotion of electric vehicles on carbon emissions in China, the full life carbon emissions of electric vehicles are studied on the basis of considering such factors as vehicle weight and grid mix composition, and fuel vehicles are added for comparison. In this paper, we collect data for 34 domestic electric vehicles, and linear regression analysis is used to model the relationship between vehicle weight and energy consumption. Then, a Hybrid Life Cycle Assessment method is used to establish the life cycle carbon emission calculation model for electric vehicles and fuel vehicles. Finally, the life cycle carbon emissions of electric vehicles and fuel vehicles under different electrical energy structures are discussed using scenario analysis. The results show that under the current grid mix composition in China, the carbon emissions of electric vehicles of the same vehicle weight class are 24% to 31% higher than that of fuel vehicles. As the proportion of clean energy in the grid mix composition increases, the advantages of electric vehicles to reduce carbon emissions will gradually emerge.

Implementation of Life Cycle Assessment Method (LCA) and Analytical Hierarchy Process (AHP) to Determine the Development of Recycling Unit of Waste Water in Grati CCPP PT Indonesia Power up Perak Grati

2018 ◽  
Vol 874 ◽  
pp. 18-26
Author(s):  
Mila Tartiarini ◽  
Udisubakti Ciptomulyono
Keyword(s):  
Waste Water ◽  
Life Cycle Assessment ◽  
Life Cycle ◽  
Power Plant ◽  
Power Plants ◽  
Waste Water Treatment ◽  
Treatment Plant ◽  
Waste Water Treatment Plant ◽  
Service Water ◽  
The Impact

Waste water result from operating activities of Grati Combined Cycled Power Plant (CCPP) is significant amount and has potentially to be reutilized. A recycling unit as the pilot project has been applied in Grati CCPP PT Indonesia Power UP Perak Grati for capacity 4 tons/hour of service water product. Development plant of Grati CCPP up to year 2018 will produce more amounts of waste water, and potentially increase the pollution load in the unit area.Considering the use of alternative development for unit recycled waste water effluent from the Waste Water Treatment Plant (WWTP) has implications to the environmental and cost aspects, therefore a proper assessment to decide the alternative is needed. Proposed method of Life Cycle Assessment (LCA) is to measure the impact to the environment. And the Cost Benefit Analysis (CBA) is to measure the economic criteria. To integrate the results of the two methods, it is used and calculated by using Hierarcy Analytical Process (AHP).The result of the study about the environmental impact and economic analysis, the development of the recycling unit is required to process all waste water produced by power plants. Focus group by experts in power plant operation using AHP is based on the results of SimaPro 7.0 and CBA. The most beneficial result is with a single score of 0.2314 Pt / 1 ton of water service, the payback period of 2.5 years, 37.5% IRR and NPV US$ 88,577.23 and the MMF-RO unit for total capacity of 14 tons/hour has become the most alternative of development.

Sign in / Sign up

Export Citation Format

Share Document